Download the thesis about welded joints in steel structures✅ Word Document

Dissertation of Master's Degree in Civil Engineering - Structure Abstract In metal structures, one of the most important places of stress concentration is the joint. In form cutting, the shear force at the connection point is so high that a part of the beam or its reinforcement is broken and separated in pieces, and this is due to negligence in the design of the connection or ...

Dissertation for Master's Degree in Civil Engineering with Earthquake Orientation Abstract: Semi-rigid joints [1] are joints whose hardness is between the two states of grip and joint and transmit a part of the anchor, in other words, its degree of rigidity is between 20% and 90%. In this thesis

Master's Thesis in Civil Engineering-Earthquake Abstract Using braces as a lateral resistance system in steel structures is one of the most common methods to withstand the forces caused by earthquakes. One of the weak points of this system is the compression resistance of the bracing member and its buckling as a result of reducing the member's load. Today, this problem has been ...

Dissertation for master's degree in mechanical engineering, construction and production trend. Abstract One of the important topics in the field of welding in engineering structures is the discussion of reducing residual stresses in welding lines and improving the quality of welding. Residual stresses reduce the load bearing limit, the life of welded joints and change the forms ...

Dissertation for Master's Degree in Civil Engineering - Structural Orientation Abstract: The most basic goal in the seismic design of structures is to prevent the structure from collapsing during severe earthquakes, which is the basis of the governing theory of seismic behavior, the result of investigating the nonlinear behavior of the structure during an earthquake and the ...

Master's Thesis in Civil Engineering - Earthquake Engineering 1391 Abstract Structures with frames with coaxial braces are among earthquake resistant systems. These structures are widely

Dissertation for obtaining a master's degree in civil engineering – Spring 2014 structure trend, first chapter, general research 1-1- Introduction: Mostly structures for severe earthquakes and surface acceptance

Master's Thesis in Civil Engineering - Structural Orientation, February 2013 Abstract: The performance of a building during an earthquake depends on many factors, as a result, predicting the seismic performance of structures should be considered either explicitly or implicitly as part of the design or evaluation. Predicting the seismic response of the structure is very ...

Dissertation for Master's Degree Abstract: Dealing with external forces such as earthquakes is one of the most important missions of civil engineers. In order to achieve this goal, the light metal frame system, which has advantages such as the possibility of industrial production, prefabrication and lightness, can be considered as a suitable alternative to traditional systems. ...

Dissertation to receive M.Sc degree in civil engineering, structural orientation. Abstract: One of the ways to strengthen the building against lateral loads is the use of a wind system (convergent or divergent). The increasing use of steel braces to deal with earthquake forces requires that the seismic performance of these types of systems be given more attention. The common ...

Dissertation for master's degree in civil engineering, structural orientation. Abstract: Today, in earthquake-prone countries, it is recommended to use a variety of energy-depleting tools in order to dissipate the energy of earthquakes on the structure. One of these tools is rotational friction dampers. Because the current regulations do not provide a value for the coefficient ...

Dissertation of the master's degree in the field: civil engineering - structure, page 1-1-problem definition: In the science of structural engineering, there has always been an attempt to predict a set of events that will have a significant effect on the efficiency and endurance of the structure during its useful life. These factors should be considered by the design engineer ...

Master's Degree Thesis Abstract With the advancement of technology, the need to use new materials is felt. New methods have been developed to make new materials. Among the new materials in progress, we can mention double-layer sheets. These materials have composite properties of composite materials. The purpose of this research is to produce a double-layer sheet of 304L ...

Dissertation for obtaining a master's degree in civil engineering, structural orientation, March 2013, abstract of the scope of using FRP materials for shear strengthening of reinforced concrete beams in

Dissertation for Master's Degree in Civil Engineering (M.Sc) Orientation: Structure Winter 2013 Abstract: Resilient construction of important government buildings, infrastructure facilities and vital arteries due to the increase

Dissertation of Master's Degree in Civil Engineering – Earthquake Engineering 2013 Abstract: Concrete beam and slab bridges with neoprene supports are among the most common highway bridges in the country.

Dissertation for receiving a master's degree (Sc..M) field: civil engineering, specialization: structure, abstract: In recent years, the subject of seismic isolation has been particularly focused on the seismic design of buildings. The main purpose of this work is to isolate the structure from the ground instead of using conventional retrofitting methods The equipment used in ...

Master's thesis in the field of mechanical engineering (applied design trend) Abstract of the study of the deterioration of non-isotropic TWB sheets under the hydroforming process. During the research, four different metals of aluminum alloys 6111-T4, 5083-H18, 5083-O and dual-phase steel DP590 and two spherical tensile tests and simple uniaxial tensile tests were used. Then we ...

Dissertation for Master's Degree in Civil-Structural Engineering Abstract In our country, most of the structures and maybe all the conventional buildings are analyzed and designed independently, which means that these structures are mainly analyzed and designed by conventional software and considering a rigid or articulated support, and then the forces obtained at the base of ...

Dissertation for Master's degree (M.A) Major: Painting Abstract: As the urban space becomes more compact and tangible, disorder and lack of visual identity occur more, and the adverse consequences of the urban patient's face, lack of ease in sending and receiving visual messages from the environment, subsequent stimulation and mental exhaustion and deprivation of peace, lack of ...

Dissertation for obtaining a master's degree in civil engineering. 2013 Winter Earthquake Abstract of earthquakes close to the fault due to having pulse type movement with a long period at the beginning of the record, including

Dissertation for Master's Degree in Civil Engineering, Soil and Foundation Mechanics Abstract: Fine-grained clay soils have always caused problems in construction projects, one of the ways to improve the properties of problematic clay soils is to use lime to stabilize the soil. It swells. this

To obtain a master's degree in the field of civil engineering - structural orientation. Abstract: The subject of this research is to investigate the level of performance and accuracy of methods based on non-linear static analysis and the need to retrofit steel buildings with a dual system of bending frame with cross brace and convergent 7-shaped brace designed with the 2800 Iran ...

Dissertation for receiving a master's degree in the field of civil engineering in the field of earthquakes. Abstract: The introduction of damage generators is very close to the concept of inelastic behavior and, as a result, hysteresis energy. Therefore, it can be said that the hysteresis energy at these levels can be a significant criterion for the design or control of the ...

Dissertation for master's degree in the field: civil engineering, structural orientation. Abstract One of the phenomena that can occur during the design, implementation and operation of buildings is the phenomenon of progressive rupture. This phenomenon is defined as the spread of failure in a structure from one element to another in such a way that it eventually leads to the ...

Dissertation for M.Sc) in the field of mechanics in the field of construction and production. Abstract In the present research, the design and construction of the ECAR machine in order to investigate the effects of the process on carbon steel sheets was our goal. The desired research was carried out in the research workshop of Islamic Azad University, Jaseb branch. After the ...

Master's Thesis in Mechanical Engineering (Applied Design): Abstract of the analysis of leading damage in pin connections of composite materials. The purpose of this research is to analyze the leading damage in pin connections of composite materials. To do this, finite element software ABAQUS and FORTRAN programming have been used. The contact between the composite plate with ...

Dissertation for receiving a master's degree in the field of structural oriented civil engineering, 2013, although the construction and design methods of structures have expanded over the years, but still the effect of earthquakes is one of the most important.

Expert thesis‌ Master of Civil Engineering, Structural Orientation, September 2013 Abstract Today, with the progress of science in the construction industry, many methods have been presented to improve reinforced concrete structures

Summer 1390 Expertise Master of the field: Civil Engineering Orientation: Structure Abstract: In this thesis, the effect of nanosilica on the mechanical properties and durability of concrete containing polypropylene fibers

Dissertation of master's degree in structural engineering, February 2011 Abstract: In the optimal civil engineering ­structure construction‌ for static loadings have been significantly developed. But, in

Master's Thesis in Civil Engineering - Earthquake Engineering March 2012 Abstract Reinforced soil is a special material that is created from the combination of soil and reinforcing member. Arming components resistant to N

Thesis for receiving the degree of M.Sc. Trend: soil and soil in February 2013 Abstract: Allowed load capacity or safe load capacity is a virtual pressure that is within the range of

Dissertation for M.Sc degree in soil and soil mechanics engineering, summer 2013, first chapter, introduction of micro candles 1-1 Micro-candles in general in dealing with problematic soils

Dissertation of master's degree in structural engineering February 2019 Chapter 1: Introduction 1-1. General, one of the most important natural events that always affects the lives of human beings

Dissertation for the Master's degree ""M.A"" specialization: educational psychology abstract of the thesis (including summary, objectives, implementation methods and obtained results): The purpose of this research was to determine the relationship between the components of emotional intelligence and the components of self-regulation learning and life in two socio-economic zones ...

In order to obtain a master's degree in the field of civil engineering - soil and foundation orientation, Abstract Nowadays, circular foundations are more or less used for structures, especially structures that have axial symmetry. In this research, a numerical study was conducted on bearing capacity and settlement of annular foundation. PLAXIS software was used for modeling. ...

Master's Thesis (M.sc) Civil Engineering, Soil and Foundation Mechanics Abstract In this research, the stability of soil reinforced with geogrid located on an underground cavity was analyzed using plaxis software, and the effect of several factors such as the number of geogrid layers, the length of the geogrid layer, the stiffness of the geogrid layer, the optimal location of ...

Dissertation for Master's Degree in Civil Engineering, Soil and Foundation Mechanics Abstract: Since many structures are built in dense urban areas, there is an increasing need to build buildings and geotechnical structures on soft clay soils. Clay soils usually show significant creep deformation. Although a lot of research has been done on the creep behavior of natural clay, ...

Master's thesis in the field of civil engineering, structure orientation. Abstract: In this study, the effect of some effective parameters on the strength of polymer concrete based on epoxy resin, including hardener, filler, and solvent, has been investigated. Rice husk ash and broom stalk ash were used as fillers and acetone-toluene mixture with a ratio of 50-50% was used as a ...

The effect of fiber and pozzolanic materials on the mechanical properties of glass fiber reinforced concrete Master's Thesis of Civil-Structural Engineering Abstract The failure and destruction of concrete is highly dependent on the formation of cracks and microcracks. With increasing loading, microcracks are connected and form cracks. In order to solve this problem and also to ...

Dissertation for receiving a master's degree in civil engineering, soil mechanics, and the abstract of the contents, one of the most important and at the same time the most difficult topics in soil mechanics is the problem of the stability of gables. Analyzing the stability of soil slopes in order to determine the most probable rupture process or in other words to find the ...

Master's Thesis of Structures Abstract In the welding process, after a stage of cooling of the body, due to the uneven distribution of temperature, stresses remain in it, which are called residual stresses. To obtain these stresses, the temperature history of the object during the welding process must be available. For this purpose, first a thermal analysis is done to obtain the ...

Master's thesis in the field of civil engineering, structural orientation. Abstract: Investigating the effect of span length on bridge behavior under the simultaneous effect of horizontal and vertical components. Among all types of structures, bridges are one of the pillars of vital arteries that need to be used after an earthquake to provide access to hospitals, fire stations, ...

Master's thesis in the field of civil engineering, structural orientation. Abstract In this study, the evaluation and comparison of nonlinear and numerical analysis of deep reinforced concrete beams with openings without reinforcement with deep concrete beams with openings reinforced with FRP sheets and deep reinforced concrete beams without openings by Abaqus finite element ...

Dissertation for receiving a master's degree in the field of civil engineering with a focus on soil and foundation. Abstract: The compressibility behavior of soils has become an important concern in geotechnical engineering. As buildings, embankments and roads are implemented, significant settlements often occur. Since long-term settlements occur due to creep, therefore, the ...

Master's Thesis in Civil-Structural Engineering Today, domes and arches have found wide applications in architectural and industrial structures due to their suitable coverage of large openings. The use of today's technologies in styling and optimizing energy consumption in these types of structures is one of the important challenges facing engineers. Therefore, the need to ...

Dissertation for Master's degree (M.S) Chapter 1 History of dynamic analysis of liquid storage tanks and regulatory orders in this regard Abstract The main goal of this research is to investigate the effect of the presence of seismic isolators on the dynamic performance of liquid storage tanks during an earthquake. In this regard, it is necessary to first know the dynamic ...

Master's Thesis in Civil Engineering, Earthquake Orientation Abstract: Bridge structures are affected by various loads and are designed according to the level of risk that is considered for them. Explosive loading is one of the loads that threaten the health of bridges. It is necessary to evaluate the amount of damage and performance of bridges under the effect of this loading ...

Master's Thesis Field: Civil Engineering Abstract Bridges are inseparable members of the means of communication and are very influential in economic and social conditions. The passage of time and random loads are among the things that threaten the health of bridges. Abnormal loads caused by natural accidents, execution errors and some other issues can cause progressive collapse ...

Master's thesis in the field of civil engineering, soil and foundation, in this research, the bearing capacity of the conical pile group and the cylindrical pile group with the same volume are calculated and compared. Due to the lack of numerical studies and modeling by software for conical piles compared to laboratory tests in this field, in this research, the modeling of the ...

Education Level: Master's Degree, Field: Civil Engineering, Major: Structures Abstract: In this thesis, the effect of nanosilica on the mechanical properties and durability of concrete containing polypropylene fibers was investigated. Polypropylene fibers with a length of 18 mm and a ratio of length to diameter of 0.9 mµ were used. The effect of fibers and nanosilica in three ...

Civil Engineering Master's Thesis - Soil and Foundation Mechanics Abstract From the past until now, one of the most economical methods to improve the mechanical properties of clay soils has been stabilization by means of additives such as lime and cement in construction projects such as road construction and consolidation of building foundations. Also, with the passage of time ...

Master's thesis in the field of civil engineering, structure, first chapter: introduction 1-1. General One of the most important natural events that has always changed people's lives and sometimes destroyed human civilizations by destroying buildings is earthquake. Therefore, humans have always tried to identify and deal with the dangers caused by earthquakes and still have not ...

Master's thesis in the field of structural civil engineering Abstract: Steel-reinforced concrete is a material that is widely used in civil engineering structures due to reasons such as suitable compressive strength, low cost of preparation and availability of raw materials. But reinforced concrete prepared from cement paste, ordinary aggregates, and steel rebars has weaknesses ...

Introduction In today's era, the presence of waste materials resulting from various physical and chemical processes is one of the important problems of industrialized and developing countries. So that extensive research is being carried out for methods of recycling or disposing of them to minimize the damage to the environment. In this regard, construction researchers, like ...

Dissertation for receiving a master's degree in the field of civil engineering, structure orientation. Abstract: Today, many reinforced concrete structures that are in operation are more than 75 years old and have been damaged due to natural disasters such as earthquakes and wind, or due to material fatigue or corrosive factors. Maintenance of structures is very important due to ...

Master's thesis in the field of chemical engineering, abstract of the design of the Driso ring base and the use of hydrocarbon solvent in the dehumidification process in Farashband refinery, water vapor is one of the most important impurities in the flow of natural gas. Usually, the water vapor itself is not a problem, but instead the liquid or solid phase that forms when the ...

Dissertation for receiving the master's degree ""M.Sc"" orientation: abstract structure In today's reinforced concrete buildings, the use of interframe separators is very common. Intermediate frames with building materials are the main types of separators that are used in this type of buildings. In previous research, these interframe separators are usually considered as ...

Dissertation for receiving a master's degree in the field of Civil Engineering (M.Sc) Major: Structure Abstract: The retrofitting of important government buildings, infrastructure facilities and vital arteries due to the increase in terrorist attacks around the world and the possibility of bombings near buildings and urban places is one of the most important discussions in the ...

Academic Dissertation for Master's Degree in: Organic Chemistry 1-1) Introduction Today, nanotechnology [1] is an attractive subject that has attracted the attention of scientists, industrialists and even ordinary people due to the special properties and practical potentials of these materials. Considering the wide applications of carbon nanotubes, the methods of mass production ...

Thesis presented as part of the academic activities required to obtain a Ph.D degree in physical education and sports science, sports biomechanics. Abstract: The purpose of this study is to investigate and compare the electromyographic activity of selected shoulder girdle muscles and scapulohumeral rhythm of handball players, tennis players, swimmers and non-athletes during arm ...

Mechanical Engineering Master's Thesis Proposed Design - Introduction The use of fibers in concrete started about 50 years ago and day by day their use in various fields has increased. Adding fibers to the mixing design improves the mechanical properties of concrete and the behavior of the structure after cracking. It also increases the softness and malleability of the section. ...

Master's Thesis in Mechanical Engineering - Applied Design Abstract In recent years, most of the researches have been focused on compressive and combined loading in order to investigate the buckling of nanotube structures, and for this purpose, the work done on tensile loading is very limited. Since the results of compressive and tensile loading in carbon nanotubes are ...

Master's Thesis in Mechanical Engineering, Applied Design, Abstract In this research, an analytical solution is presented to show the size dependence and the effect of temperature difference on nonlinear free vibrations and post-buckling behavior of microtubes containing current. Based on Euler-Bernoulli model, strain gradient theory, Couple's stress theory and von-Carman ...

Dissertation for a master's degree in civil engineering, soil and foundation mechanics. Abstract: Since many structures are built in dense urban areas, there is an increasing need to build buildings and geotechnical structures on soft clay soils. Clay soils usually show significant creep deformation. Although a lot of research has been done on the creep behavior of natural clay, ...

Dissertation for M.Sc Master's degree, mechanical engineering-applied design Abstract With the emergence of composite materials, a huge progress was achieved in many engineering applications. Nevertheless, problems such as delamination, stress concentration, and discontinuous distribution of stress, the idea of ??creating a new type of composite materials in which properties ...

Master's Thesis in Mechanical Engineering-Applied Design Abstract In this thesis, classical sheet theories, first-order shear deformation theory and refined two-variable theory for the free vibration problem are investigated using standard finite element and hierarchical finite element methods. The refined two-variable theory is an equivalent single-layer theory, in which two ...

Master's thesis in the field of mechanical engineering - applied design approach. Abstract: Identifying the stiffness and damping coefficients of a beam support. By: Majid Abedi. Supports and connections play a fundamental and important role in engineering structures. It is necessary to identify different support parameters. Stiffness and damping parameters are the most ...

Dissertation for Master's Degree in Rock Mechanics Introduction Excavations made in rocks have different dimensions according to their purpose and vary from small dimensions to dimensions comparable to huge concrete structures. Surface excavations can be used as a space for extracting mines, creating buildings, and supporting and overflowing dams, factories, power plants, as ...

Dissertation for M.Sc Mechanical Engineering - Applied Design Orientation Abstract Bearings are widely used in various industries including automobile and aircraft industry. Therefore, it is important to check the bearings, therefore, in this research, the hardness matrix of the angular contact ball bearings has been investigated. In this research, the equations governing the ...

Master's thesis in the field of civil engineering, structural orientation Chapter 1: Introduction 1-1. General One of the most important natural events that have always transformed human life and sometimes destroyed human civilizations by destroying buildings is earthquake. Therefore, humans have always tried to identify and deal with the dangers caused by earthquakes and still ...

Dissertation for receiving master's degree in mechanical engineering, the trend of manufacturing and production of complex industrial products from metal pipes with the aim of increasing the strength-to-weight ratio of structures and especially reducing the fuel consumption of vehicles has attracted the attention of industrialists in recent years. In this regard, one of the new ...

Master's Thesis in Mechanical Engineering (Applied Design) Abstract of three-dimensional interlayer stress investigation in mechanical connections in layered composite materials The purpose of this thesis is to investigate three-dimensional interlayer stresses in mechanical connections in layered composite materials. For this purpose, finite element method and ABAQUS software ...

Dissertation for M.Sc degree, specialization: manufacturing and production, abstract in this thesis, how to improve the properties of plastics with the help of heat treatment. First, we will talk briefly about polymers, plastics and their sub-branches and heat treatment on them, and then we will discuss the effect of annealing heat treatment on heavy polyethylene sheets that are ...

Dissertation of master's degree in civil-structural engineering Abstract: Divergent bracing frames are considered earthquake-resistant systems for steel structures. These braces are from my difficulty

Dissertation for Master's Degree in Civil Engineering, Marine Structures, Abstract: Tension-based platforms are among economic marine platforms for use in deep waters. The correct prediction of the platform's dynamic response to environmental loads is very important in its economic and safe design. In this research, the dynamic behavior of the tension base platform under the ...

Master's Thesis for Master's Degree Abstract Carbon nanotube can be considered the most amazing nanostructured material discovered so far. Unique features such as high strength, light weight, and high energy absorption capability have made this material recently attracted the attention of scientists in making bulletproof vests. In this thesis, a structural model in the Abaqus ...

end‌name? Rasht Master's Degree: Civil Engineering (M.S.C.) Focus: Hydraulic Structures Academic Year 2011-2012 Summary of the Minab River, the most important river of Khan? The fresh water is in Hormozgan province. this river

Chapter 1 Introduction and Generalities 1-1 Introduction Since long ago, humans have been thinking about the effective and useful use of their abilities, facilities and resources, but in today's industrial world, this is more than ever.