Download more than 100 examples of thesis, proposal and project topics about wear rate in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
The master's thesis of precision instruments and automation in the oil industry. The introduction of the entire research is one of the important scientific, technical and economic topics, the issue of corrosion of metals and the protection of metal facilities. Investigating the topic of corrosion is not so simple and with all the research done, its factors are still not known ...
Master's Thesis of Precision Instrumentation and Automation in the Oil Industry. Abstract: Corrosion rate prediction and wear rate constant in gas brain tube using neural network is a phenomenon that is very complex due to the influence of various factors and cannot be modeled easily. In order to predict and model corrosion, attention is paid to its physical, chemical and ...
Abstract The old neighborhoods of the cities not only because of their cultural heritage, but because they are located inside the cities, they have provided a valuable opportunity to improve and modernize and respond to the growing needs of the city. Many such dilapidated structures have been left alone in Iranian cities, and planning to renovate and organize such areas has ...
Chapter 1: Overview of the research Foreword Today, cities are growing rapidly and have presented themselves as the first human settlement. This trend is related to the recent centuries, especially after the industrial revolution, which caused many problems in the physical and population growth of cities. In response to these problems, various plans were implemented, perhaps the ...
Master's Thesis in the field of Chemical Engineering (no orientation) Abstract of the laboratory study of the wear phenomenon of liquid containing sand in pipelines. The studied fluid consists of two phases, liquid and solid. The liquid phase is water, and sand particles form the solid phase. In this research, the parameters affecting the wear rate, including: fluid speed, sand ...
MBA Master's Thesis Summer 2013 Abstract: The purpose of this research is to investigate the relationship between spiritual intelligence, job satisfaction and organizational commitment among the employees of the National Bank of Mazandaran Province. It is Ama community
Thesis for obtaining the degree of Master of Science (M.A. Business Orientation 2019 Winter Abstract: Social Security Organization is responsible for providing insurance coverage for workers who are not subject to special insurance laws and therefore have
M.A. Thesis for obtaining a master's degree (Tension: Human Resource Management, Summer 2013) Abstract: This research is aimed at investigating the relationship between managers' awareness of management duties and decision making.
Master's Thesis in (Agricultural Economics Engineering) Winter 2013 Abstract: Drought is one of the major problems that Kerman province is facing. And in the last decade, it has gained critical dimensions
Thesis of master's degree in the field of economics in Islamic economics, February 2013, abstract of worn out fabrics and urban inefficiency are areas of the city that over the past years, its constituent elements, including
Chapter 1 1-1-Introduction: Common fluids such as water, oils and ethylene glycol, which are usually used as heat transfer media, have a limited ability in terms of thermal properties, which is the first obstacle to compress and increase the efficiency of heat exchangers. One of the ways to improve heat transfer is to add particles to the fluid. This method is used for fluids ...
Master's Thesis of Persian Language and Literature Abstract ""Karma"", the law of action and reaction, the law of radiation and its reflection, is an Eastern Sanskrit word that we have defined in detail in the first chapter. We examined this law in Mawlan's Masnavi and Sana'i's Hadiqa al-Haqiqah. Our presupposition was that this law, considering its various aspects and its ...
The effectiveness of the regulations of detailed plans on the renovation and improvement of the dilapidated fabric of Isfahan city. Abstract Considering the problems existing in big cities, such as the expansion of the city on the surrounding valuable agricultural lands and the spatial-physical wear and tear of the inner fabrics of the city, the need to adopt methods and ...
Master's Degree in Geography, Urban Planning, Abstract: Dilapidated urban tissues, regardless of their different types, are the product of some negligence of urban management, which over time has become an area of ??the city that lacks the necessary stability and physical strength, proper access for their homes has not been established, and they suffer from a severe lack of ...
Dissertation to receive the master's degree ""M.S.c"" specialization: Textile chemistry and fiber science Abstract: One of the important processes in the completion of textile goods is the underhand improvement in textiles. Finishing the softener provides a desirable softness to the fabric and improves its properties, and the main goals of the softener are to reduce static ...
Thesis for obtaining a master's degree in the field: geography, urban planning, abstract. Sustainable development is one of the concepts that has been receiving serious attention in international forums for several decades due to the negative and sometimes irreparable effects of development plans. It can be said that improvement and renovation are in harmony with the goals of ...
Dissertation for obtaining a master's degree, field: human geography, orientation: urban planning, abstract: urban decay is one of the serious problems and unavoidable phenomena that urban management in all countries of the world is facing. What is important is that urban wear and tear is not specific to a specific country or a specific city, but all cities and villages in the ...
To receive a master's degree in textile technology engineering. Abstract In the previous research, multi-sized nano-roughness was developed using nanoparticles with different sizes and different surface charges along with silicone resin coating to produce multi-purpose textiles with stable properties. In this research, the idea of ??using laser irradiation and finishing textiles ...
Dissertation for receiving a master's degree, field of study: electricity-power, orientation: electric machines in a synchronous generator, a dc current is applied to the rotor coil to produce a magnetic field. Then the rotor of the generator is rotated by a prime mover to create a rotating magnetic field in the machine. This magnetic field induces a three-phase voltage in the ...
Dissertation for Master's Degree (M.A.) Field: Geography and Urban Planning Abstract The revitalization plan or the restoration plan of the city actually fulfills the task of predicting the way of development of the existing phenomena for the continuation of the life of the people of the city. In other words, the urban revitalization plan - in the existing conditions and more ...
Chapter 1: Introduction/Overview of the research After language, acting is the first imitation that humans use from a young age to create moments and adventures that they desire to experience; Without knowing it, he is performing a show with different effects and contracts. Because he has not yet understood the rules and principles of the show in his first imitations. Like the ...
Dissertation for obtaining a master's degree in the field: Abstract Art Research In Islam, every art is measured by the criterion of being as close and effective as possible to the human spirit. The closest thing to our soul is our body. Therefore, any art that deals with the body is important. Clothing is the most important of all of them. After the body, clothes are the ...
To receive a master's degree in civil engineering - water Abstract: Relaxation ponds should be designed in such a way that they can depreciate the potential energy stored in the reservoir water of dams and dams in such a way as to transfer it to the natural bed so as not to cause the loss of the bed and in critical conditions to destroy the pond and dam itself. In different ...
The effect of fiber and pozzolanic materials on the mechanical properties of glass fiber reinforced concrete Master's Thesis of Civil-Structural Engineering Abstract The failure and destruction of concrete is highly dependent on the formation of cracks and microcracks. With increasing loading, microcracks are connected and form cracks. In order to solve this problem and also to ...
Academic Thesis for Master's Degree in Persian Language and Literature Abstract: Nature with its beautiful effects has always impressed all people, especially poets and writers, and has been continuously praised and described and widely reflected in their works. In the meantime, the sun, as an astronomical phenomenon and its related images, has become the basis for the creation ...
Abstract: Hydraulic jump is one of the amazing hydraulic phenomena that consumes the kinetic energy of water. Hydraulic structures such as relaxation ponds mainly use this important property of hydraulic jump to consume energy downstream of overflows, rapids and valves. The dimensions of these structures are directly dependent on the characteristics of hydraulic jump, therefore, ...
Master's Thesis Field: Civil Engineering Abstract Bridges are inseparable members of the means of communication and are very influential in economic and social conditions. The passage of time and random loads are among the things that threaten the health of bridges. Abnormal loads caused by natural accidents, execution errors and some other issues can cause progressive collapse ...
Dissertation for Master's Degree in Mechatronics Engineering Persian Abstract The purpose of this project is to introduce a new approach for troubleshooting gas transmission pipelines using mechanical waves, which is much cheaper and easier than other methods. who are currently working. These lines are usually located in difficult environmental conditions and far away and in ...
Master's Thesis in Civil Engineering (M.Sc) Major: Project Management and Construction Abstract: Seismic improvement of educational buildings is one of the main priorities of the government after the Bam earthquake. This incident drew the attention of the statesmen to the fact that the improvement of educational buildings in Iran is a historical necessity, and if a proper ...
Master's Thesis of Electrical Engineering - Power Abstract: Induction motor condition monitoring is an absolutely necessary and important technology to detect various defects at the initial stage. which can prevent the spread of unexpected defects in the initial stages. Approximately 30-40% of induction motor defects are related to stator defects. In this thesis, a comprehensive ...
Dissertation of the master's course in electrical field (M. Sc) orientation: power Abstract: In this thesis, electrical and mechanical defects in electric machines are examined and the factors that cause them and the methods of fixing these defects are stated. After that, with the help of the winding function method of the simulation machine and the intended error, i.e. the ...
Dissertation for Master's Degree in Civil Engineering, Hydraulic Structures, Abstract: It is obvious that water resources are essential for the life of living organisms and especially for human life. Drainers are a set of structures that are used to transfer water from the dam lake to the discharge point downstream. Therefore, due to the importance of this part of the dam, the ...
Abstract: Today in the world, sponsorships, especially sports sponsorships, constitute marketing activities. In Iran, financial sports activities are growing, especially in football. Therefore, it is necessary for company managers to obtain complete information about the effectiveness of this type of marketing activities so that they can make decisions including the allocation ...
Introduction In today's era, the presence of waste materials resulting from various physical and chemical processes is one of the important problems of industrialized and developing countries. So that extensive research is being carried out for methods of recycling or disposing of them to minimize the damage to the environment. In this regard, construction researchers, like ...
Master's degree thesis in the field of physical education management and sports science Abstract The purpose of this research was to determine the relationship between stress and job satisfaction in Naja Physical Education employees. The statistical population of the research includes 586 physical education employees of Naja, which was the total sample size and equal to the ...
Dissertation for receiving a doctorate degree in dentistry Summary: Introduction and purpose: It is important to evaluate occlusion in the period of milk teeth in order to recognize and correct occlusal problems during the development of teeth and to have a normal occlusion in adulthood. Because in children, occlusion examination, especially in the area of ??milk molars, ...
Dissertation for receiving the degree of Doctor of Dentistry Abstract Introduction Considering the importance of milk teeth in creating an ideal occlusion, it is essential to preserve and maintain them due to caries. One of the methods of restoring milk teeth is the use of stainless steel veneers. Maintaining the health of the tissue that supports the teeth is one of the ...
Dissertation (dissertation) to receive a degree... in the field of physical education and sports sciences, specialization in sports physiology. Therefore, the aim of this study was to investigate the effect of endurance, strength and parallel exercises on heart rate, systolic blood pressure, diastolic blood pressure, and PR interval in the workers of Pars Khodro Company. In ...
A master's thesis in the field of chemical engineering. Abstract of the laboratory study of the wear phenomenon of gas containing sand and liquid droplets in pipelines. For this purpose, a pipeline test device including: vertical and horizontal pipelines and various connections has been made. The studied fluid consists of three phases: gas, liquid and solid. The gas phase is ...
Dissertation for master's degree in executive management, marketing and export orientation. Abstract: This research seeks to investigate and identify the causes and factors affecting the incidence or severity of road accidents on the Ardabil-Maghan axis, in line with which the relationship between road, human, environmental and vehicle variables with the occurrence of accidents ...
Dissertation to receive a master's degree in neonatal special care Abstract Title: Investigating the relationship between the knowledge and performance of nurses working in neonatal wards in the field of venipuncture in hospitals affiliated to Tabriz University of Medical Sciences in 2013 Introduction: Venipuncture is the most important therapeutic procedure among hospitalized ...
Dissertation for obtaining a doctorate degree in dentistry. Introduction Removing large amounts of dental tissue weakens the restored tooth. The type of restoration and composite method can be one of the influencing factors on tooth fracture resistance under occlusal forces. The purpose of this study was to investigate the effect of using new low-shrinkage composites on the ...
Dissertation for receiving the degree of Doctor of Dentistry, Dental Materials Research Center Abstract Objective: One of the objectives of this study was to investigate the fracture resistance of the teeth coated with various crown and root restorations. Materials and methods: 60 freshly extracted human premolar teeth were selected and randomly divided into five groups of ...
Abstract This thesis deals with uncertainty estimation in robust control of robotic arms and presents new methods based on voltage control strategy for uncertainty estimation. The voltage control method is much simpler compared to the conventional torque control method, because it does not require a complex non-linear model of the robot. As a result, the volume of controller ...
Master's Thesis Field: Physical Education (M.A) Direction: Management Abstract: In this research, the motivations and effective factors of the spectators to watch the volleyball game of Al-Mahdi Hormozgan team were discussed. The method of this research is descriptive-correlation which was conducted in the field. The research tool was a twenty-seven question questionnaire about ...
Dissertation for master's degree in electrical field, orientation: power. Abstract The concept of microgrid is a set of loads, sources of production and energy storage that act as a controllable load or generator and can provide power and heat for a local area. Management of production power in microgrid is one of the main current topics in the design and operation of microgrid. ...
Master's thesis in the field of polymerization engineering, abstract was determined by using experimental design methods to determine the optimal feed recipe for the preparation of nitrile rubber. Initially, to determine the factors affecting the rate of polymerization, screening tests were designed according to the Plate-Boorman method, which examines a large number of factors ...
Dissertation for Doctorate Degree in Dentistry Abstract The purpose of this study was to compare the microleakage of adhesive total etch and self etch using three methods of Fluid filtration, dye penetration and dye extraction, as well as to determine the statistical relationship between these three methods. Materials and methods In this laboratory study, 72 extracted human ...
Dissertation for receiving a master's degree, field of study: electricity-power, orientation: electric machines 1.1 Introduction: In a synchronous generator, a dc current is applied to the rotor coil to produce a magnetic field. Then the rotor of the generator is rotated by a prime mover to create a rotating magnetic field in the machine. This magnetic field induces a ...
Master's Thesis of Polymer Industrial Engineering Abstract Cross-linked polyethylene is one of the materials that is widely used in the field of insulation production in cables due to having suitable electrical properties and good electrical strength. Nowadays, one of the methods of optimizing the properties and changing the behavior of polymers is the use of filler particles ...
Dissertation for obtaining a master's degree (M.Sc) in the field of organic chemistry. Dissertation abstract (including summary, objectives, implementation methods and results obtained): Investigating the effect of cationic polymer compounds in hair care products including shampoo and conditioner on the hair strand, especially its effect on the cuticle of the hair strand. The ...
Master's thesis in the field of mechanical engineering - energy conversion trend Abstract: In this research, the turbulent flow of a non-Newtonian nanofluid in a microchannel with a circular cross-section is simulated. First, the types of classification of microchannels, the methods of making microchannels, as well as the advantages and challenges of using microchannels are ...
Dissertation for Master's Degree Abstract Today, preventing losses caused by blackouts and undistributed energy is very important. Therefore, one of the most important issues in the operation of the distribution network is the renewal of the load, which has a great impact on the constant service to the subscribers. When a part of the network is cut off due to an error or ...
Master's thesis in the field: Electrical Engineering - Power Abstract Transformer is one of the most important components of the power system, and due to the high cost and importance of the transformer's performance in the power system and the time-consuming nature of its replacement, the process of examining and choosing the optimal and optimal operation method for ...
Dissertation for M.Sc Mechanical Engineering - Energy Conversion Orientation Abstract: In this research, the turbulent flow of a non-Newtonian nanofluid in a microchannel with a circular cross-section is simulated. First, the types of classification of microchannels, the methods of making microchannels, as well as the advantages and challenges of using microchannels are stated. ...
Dissertation for obtaining a doctorate degree in dentistry Abstract: Introduction and purpose: One of the most important occupational tensions that dentists may face in their profession is patient complaints. The purpose of this study is to present a picture of dental malpractices in Mashhad. Materials and methods: The file of complaints received by the Mashhad Medical System ...
Master's Thesis for Master's Degree Abstract Carbon nanotube can be considered the most amazing nanostructured material discovered so far. Unique features such as high strength, light weight, and high energy absorption capability have made this material recently attracted the attention of scientists in making bulletproof vests. In this thesis, a structural model in the Abaqus ...
Dissertation for master's degree in Applied Design-Dynamics and Control Abstract: Transverse instability is one of the common problems in high-speed rail vehicles, which occurs on rails without arches and due to the friction-creep nature of wheel-rail contact that creates non-conservative forces in the system. This phenomenon is called hunting, which is a type of ...
Master's Thesis in Qur'anic Studies Abstract The topic of curse and curse is one of the first issues in the Islamic world but also in the human world and it affects Muslim and non-Muslim communities, and it has wide moral, social and political dimensions, and its psychological and propaganda aspects are significant and can be discussed and investigated a lot. So, this issue has ...
Dissertation for Doctoral Degree Abstract This thesis deals with uncertainty estimation in robust control of robotic arms and presents new methods based on voltage control strategy to estimate uncertainty. The voltage control method is much simpler compared to the conventional torque control method, because it does not require a complex non-linear model of the robot. As a ...
Dissertation of the Master's course in the field of electricity (M. Sc) orientation: power Abstract: In this thesis, electrical and mechanical defects in electric machines are first examined and the factors causing them and the methods of fixing these defects are stated. After that, with the help of the winding function method of the simulation machine and the intended error, ...
Mechanical Engineering (Tendency to Energy Conversion) Abstract: Investigating the disadvantages of urban water supply networks (as an example of the Langrod water network) and optimizing and designing the optimal network for a specific region using the HBMO honey bee matching algorithm. Due to the global water crisis, today a special approach to the design and optimal use of ...
Dissertation for Master's Degree in Theology and Islamic Studies - Fiqh and Fundamentals of Islamic Law Abstract: The principle or rule of correctness is one of the principles that has been legitimized by jurisprudential documents such as verses, narrations, consensus and reasoning by the Holy Shariah in order to facilitate and prevent hardship and embarrassment for people in ...
Dissertation for Master's Degree in Mechanical Engineering Field: Applied Design Abstract In this thesis, stability analysis of composite beam reinforced with carbon nanotubes on elastic support under axial force is investigated. The distribution of nanotubes is assumed to be uniform[1]. To determine the properties of materials reinforced with nanotubes, the results of molecular ...
Abstract: Research in the field of heat transfer of suspensions with nanometer-sized solid particles in the base fluid has started in the last decade. Recent research in the field of nanofluids has shown that the addition of nanoparticles causes a significant increase in the heat transfer of the suspension. Another common way to improve the thermal performance of devices is to ...
Master's thesis in the field of mechanics, specialization: mechanical engineering - energy conversion. Abstract: One of the most important components of fluid transmission systems are control valves, which can be seen in different routes of oil and gas transmission pipelines, etc. In control valves, the most important issue is the property of the flow in order to achieve the ...
Mechanical Engineering, Manufacturing and Production Department, Master's Thesis, Introduction High-speed rolling bearings have many applications in rotating machines, whose task is to separate the rotating parts from the fixed parts of the machine. Accuracy is very important in machine tool applications and bearing corrosion resistance in chemical machines. In aerospace ...
Dissertation for Master's Degree in Islamic Mysticism Abstract: One of the important Sunni critics in the 6th century is Abul Faraj Abdul Rahman Ibn Jozi (died 597). He has devoted most of the book ""Talbis Iblis"" to criticizing the views and manners of Sufis. In his opinion, among the tricks of the devil with Sufis are leaving business and marriage, living in seclusion, ...
To obtain a master's degree in mechanical engineering - manufacturing and production. Abstract: The electric discharge machining process is one of the advanced machining processes, which is one of the important applications of this process. Despite the unique applications of this machining method, low chipping rate, high surface roughness, high tool wear rate and environmental ...
Dissertation for M.Sc degree, specialization: manufacturing and production, abstract in this thesis, how to improve the properties of plastics with the help of heat treatment. First, we will talk briefly about polymers, plastics and their sub-branches and heat treatment on them, and then we will discuss the effect of annealing heat treatment on heavy polyethylene sheets that are ...
Dissertation for Master's Degree in Educational Psychology Spring 2019 Abstract Concept map is one of the teaching-learning strategies that can facilitate meaningful learning in students and relationships
Dissertation for Obtaining an M.A. degree in the field of educational management in the academic year 1393-1394. Abstract: Recently, a new concept has been proposed in the theoretical foundations of management, which is called organizational maturity.
Abstract The main purpose of the research is to investigate the relationship between business strategy and profit quality in companies admitted to the Tehran Stock Exchange market. The statistical sample of the research includes 145 companies accepted in Bo
Abstract The main purpose of the research is to investigate the relationship between business strategy and profit quality in companies admitted to the Tehran Stock Exchange market. The statistical sample of the research includes 145 accepted companies
Dissertation for Master's Degree (MA) Field: Educational Management Orientation: Educational Management Abstract: Purpose: The general purpose of this research is to investigate the role of addiction to information technology on self-regulation and development strategies.
Thesis for receiving the M.A. degree. State management summer 2013 abstract: Strategic thinking is important to see something that others don't see, to discover a hidden need
Thesis of the master's degree in the educational field: MBA 2013 Farsi Abstract Many business managers consider marketing to mean sales or advertising, while the concept of market
Thesis for obtaining a master's degree (M.A., business management, international orientation, academic year 92-91, abstract, increasing competition, especially in the service sector, paying more attention to customer retention.
Dissertation of master's degree in the field: MBA management with marketing orientation Fall 2011 Persian Abstract: This research seeks to extract a model for selecting brand development strategies. In this research, S