Download the thesis about vortex tube✅ Word Document

Master's Thesis of Mechanics, Energy Conversion, Abstract In this study, by using the computational fluid dynamics technique, an attempt has been made to obtain the optimal dimensions for the injection nozzles of the vortex tube device. For this purpose, numerical simulation has been performed for different values ??of length, width, and height of injection nozzles, and other ...

Master's Thesis in Mechanical Engineering - Energy Conversion Abstract The vortex tube is a simple mechanical device that has no moving parts and is one of the equipment used in the refrigeration system, in which a high-pressure fluid enters the vortex tube through the inlet nozzles and splits into two streams with a lower and higher temperature than the inlet temperature, thus ...

Dissertation to receive the degree of Doctor of Dentistry Abstract Introduction: One of the best methods for reconstructing bone defects in the mouth and teeth of patients is the use of autogenous grafting, which is still considered as the gold standard for augmentation of bone deficient areas. There are numerous intraoral areas for the removal of this bone graft, the maxillary ...

Academic Dissertation for Master's Degree in: Organic Chemistry 1-1) Introduction Today, nanotechnology [1] is an attractive subject that has attracted the attention of scientists, industrialists and even ordinary people due to the special properties and practical potentials of these materials. Considering the wide applications of carbon nanotubes, the methods of mass production ...

Dissertation: To obtain a master's degree in neonatal special care nursing Abstract Introduction: Premature babies are subjected to many painful interventions during care and treatment, and nurses should use non-pharmacological methods without risk to prevent short and long-term complications caused by pain, so this study was conducted to determine the effect of swaddling on the ...

Master's Thesis in Mechanical Engineering - Applied Design Abstract In recent years, most of the researches have been focused on compressive and combined loading in order to investigate the buckling of nanotube structures, and for this purpose, the work done on tensile loading is very limited. Since the results of compressive and tensile loading in carbon nanotubes are ...

Master's Thesis in Mechanical Engineering, Applied Design, Abstract In this research, an analytical solution is presented to show the size dependence and the effect of temperature difference on nonlinear free vibrations and post-buckling behavior of microtubes containing current. Based on Euler-Bernoulli model, strain gradient theory, Couple's stress theory and von-Carman ...

Dissertation for Master's Degree in Mechanical Engineering (Applied Design) Abstract: Electromechanical micro and nano systems have been noticed due to their distinctive features and unique characteristics, mainly in the two fields of sensors and sensors, in various sciences such as mechanics, aerospace and medicine. Electrostatic stimulation is one of the simplest and most ...

Master's thesis in the field of mechanical engineering - energy conversion trend Abstract: In this research, the turbulent flow of a non-Newtonian nanofluid in a microchannel with a circular cross-section is simulated. First, the types of classification of microchannels, the methods of making microchannels, as well as the advantages and challenges of using microchannels are ...

Master's thesis in the field of electrical-electronic engineering Abstract of the construction of a humidity sensor using carbon nanotubes Today, humidity sensors have many applications in various fields, including environmental control processes, household applications, automotive industry, medicine, agriculture and chemical industries. Until now, various structures have been ...

Dissertation for Master's Degree in Medical Nanotechnology Abstract Choline is one of the constituents of phospholipids and plays an important role in fat metabolism. It is also necessary for the formation of acetylcholine, which is involved in the transmission of nerve impulses. Lack or increase of choline in the body causes complications and diseases in humans; Therefore, it ...

Thesis for obtaining a master's degree in the field: Chemistry, specialization: Analytical Chemistry, Abstract In recent years, the use of nanotubes as nanocarriers for drug delivery has been researched. In this research, carbon nanotubes CNT(5-5), CNT(0-6), BNNT(0-6) and BNNT(5-5) doped with Ga have been used. First, the nanotubes were drawn using Gauss View and Nanotube ...

Dissertation for M.Sc Mechanical Engineering - Energy Conversion Orientation Abstract: In this research, the turbulent flow of a non-Newtonian nanofluid in a microchannel with a circular cross-section is simulated. First, the types of classification of microchannels, the methods of making microchannels, as well as the advantages and challenges of using microchannels are stated. ...

Dissertation to receive a master's degree in the field: Chemistry, specialization: organic. Abstract In recent years, the use of nanotubes as nanocarriers for drug delivery has been researched. In this research, fullerene C60 and nine different nanotubes have been used as carriers of the drug molecule 8-hydroxyquinoline. First, the structure of HQ-8 drug molecule and nanotubes ...

The thesis for obtaining a master's degree in the field of mechanics, investigating and analyzing the free and forced vibrations of a multi-walled carbon nanotube placed in an elastic medium in order to achieve a clear mathematical understanding of the behavior of different walls of the nanotube under the influence of van der Waals forces and the elastic medium is one of the ...

Dissertation (or thesis) for receiving a master's degree in agriculture, agricultural biotechnology, abstract: Potato (Solanum tuberosum L.) is the most important nutritious plant after cereals, and it is the fourth major crop in the world after wheat, rice and corn. Due to its vegetative reproduction, the potato product is susceptible to contamination by bacteria, fungi, ...

Master's Thesis for Master's Degree Abstract Carbon nanotube can be considered the most amazing nanostructured material discovered so far. Unique features such as high strength, light weight, and high energy absorption capability have made this material recently attracted the attention of scientists in making bulletproof vests. In this thesis, a structural model in the Abaqus ...

Dissertation for M.Sc. Degree: Food Industry 1.1 Introduction Along with the increase in population, the demand for food has also increased and this has caused the excessive use of chemical and organic fertilizers to increase crop production (Ardkani et al., 2005). Vegetables are rich in vitamins, minerals and antioxidant compounds, whose anti-cancer properties have been proven ...

Master's Thesis of Electrical-Communication Engineering Abstract Production and amplification of radio frequencies [1] is the heart of satellite communication and optical electronics applications. The telecommunications industry is looking for smaller and more efficient RF amplifiers at higher frequencies. Nanostructures meet these needs due to their unique characteristics. In ...

Dissertation for M.Sc. Mechanical Engineering - Manufacturing and Production Trend Abstract The manufacture of square and rectangular pipes has received more attention due to their wide use in industries that require high pressure and temperature. There are different methods for making rectangular tubes, including extrusion, stretching and pressing. Another method that has been ...

Abstract Introduction: Intravenous feeding is considered a preferred and safe method for patients hospitalized in special wards, which despite its many advantages, has complications such as respiratory aspiration. Aspiration pneumonia is responsible for causing 15-20% of hospital infections and 39% increase in costs, and it is also considered one of the ten causes of death in ...

((M.Sc)) Thesis for Master's Degree Abstract This study was conducted to investigate the toxic effects of functionalized single-walled carbon nanotubes on three cell lines MCF7, HUVEC, PC12. The cells were treated with different concentrations of two single-walled carbon nanotubes with different functional groups (carboxyl and cyclic functional groups) and incubated for 24, 48 ...

Master's Thesis of Precision Instrumentation and Automation in the Oil Industry. Abstract: Corrosion rate prediction and wear rate constant in gas brain tube using neural network is a phenomenon that is very complex due to the influence of various factors and cannot be modeled easily. In order to predict and model corrosion, attention is paid to its physical, chemical and ...

Dissertation for Master's Degree Abstract Achieving higher rates of heat transfer using different techniques that can result in saving a significant amount of energy and also lead to the production of more compact and cheaper devices with higher thermal efficiency has attracted the attention of researchers. Vortex generation is one of the best methods used to increase heat ...

Dissertation for M.Sc Master's Degree, Mechanical Engineering-Manufacturing and Production Abstract Nowadays, due to the need for parts with high strength and low weight, the method of manufacturing parts has become important. Hot gas forming [1] is a new process that, due to the elimination of side operations such as welding, the total weight of the parts is reduced, the ...

Dissertation for Master's Degree in Civil Engineering – Shahrivar Marine Structures, September 1992 Abstract: Pipe-in-pipe systems are widely used in transmission line applications.

end‌name? Rasht Master's Degree: Civil Engineering (M.S.C.) Focus: Hydraulic Structures Academic Year 2011-2012 Summary of the Minab River, the most important river of Khan? The fresh water is in Hormozgan province. this river

Dissertation for obtaining a master's degree (M.A) Business Management - Marketing Orientation Summer 2019 Abstract Considering the ever-increasing speed of changes and competition in the economic world, managers should have

Chapter 1 1-1-Introduction: Common fluids such as water, oils and ethylene glycol, which are usually used as heat transfer media, have a limited ability in terms of thermal properties, which is the first obstacle to compress and increase the efficiency of heat exchangers. One of the ways to improve heat transfer is to add particles to the fluid. This method is used for fluids ...

Thesis for obtaining a master's degree in the field of natural geography, geomorphology in environmental planning. Abstract: Studies on the effects of urban development on Zarjoub and Goharroud rivers in Rasht city have been carried out with the aim of improving the environmental quality of changing the conditions of the rivers from their pollution and flooding to favorable and ...

Master's Thesis in Advertising and Cultural Communication Abstract The present research has studied the relationship between the use of social networks and the religious identity of users with the aim of knowing the relationship between the individual characteristics of users and political and social factors with their religious identity and in order to answer the basic question ...

In order to receive a master's degree in geography and climatology in environmental planning, in order to identify the synoptic patterns leading to torrential rain, first, daily rainfall equal to 20 mm and more during the statistical period of 1991 to 2010 was determined as the basis for analyzing the torrent for the synoptic stations of Astara, Anzali, Rasht and Ramsar with the ...

Dissertation for Master's degree (M.A.) abstract of the present study has studied the relationship between the use of social networks and the religious orientation of social network users using a survey method. This research was conducted in the Faculty of Fine Arts of Tehran University and among the students of different fields and courses of this faculty. Analysis of the ...

Chapter 1 1-1-Introduction Climate[1] is a complex system[2] that is changing mainly due to the increase of greenhouse gases. During the 20th century, especially in the last two decades, the climate of the earth lost its balance and showed a tendency to increase the temperature (Rahimiu et al., 2012). According to many experts, climate change is a natural phenomenon[3] that has ...

Dissertation for obtaining a master's degree in electrical engineering, electronics, abstract, accurate measurement and control of temperature in industrial and research systems is of particular importance, and the correct operation of some industrial and laboratory tools is possible only in a certain location with a small number of channels (maximum 8 channels). Therefore, the ...

Master's thesis in the field of chemical engineering Kidney stones are one of the most common diseases in the world, most of its crystals consist of calcium oxalate crystals. Therefore, it has been a long time that the investigation of effective substances in controlling this disease through the control of calcium oxalate crystals has been considered. The purpose of this ...

Master's Thesis in Artificial Intelligence Abstract Today, social networks such as Facebook have become very popular, because they allow people around the world to communicate with their friends without physical contact, leave messages for them, and express their opinions on various topics. Identifying organizations in social networks is very useful in different fields, so this ...

Master's thesis in the field of computer engineering (artificial intelligence) abstract of various image processing techniques are widely used in the field of dentistry. Among these applications, we can mention the identification based on dental images, the detection of dental caries, as well as the identification and examination of dental lesions, which mainly occur around the ...

Computer Engineering (Artificial Intelligence) Master's Dissertation Abstract Recommender systems are software tools and techniques that introduce items according to the user's needs. Content-oriented methods and shared filtering are successful solutions in recommender systems. The content-oriented method is defined based on the characteristics of the items. This method checks ...

Dissertation for Master's Degree (M.A) Field of Study: Public Management (Transformation Orientation) Abstract In the current research, the relationship between organizational learning and organizational entrepreneurship in Noordulule Safasaveh company has been investigated. In this regard, organizational learning based on Nifa's model and organizational entrepreneurship based ...

Dissertation for Master's Degree in Civil Engineering Majoring in Environmental Engineering Abstract In this research, the effect of biological reactions on the removal of organic substances in wastewater during transfer from production sources to the treatment plant in conventional networks and new small diameter networks was investigated. For this purpose, a part of these ...

Master's Thesis Department: Civil Engineering (MSC) Specialization: Hydraulic Structures Abstract Minab River is the most important freshwater river in Hormozgan Province. This river is the drainage of the surface waters of the Minab catchment area, and two bridges have been built on it, the first one is the connecting road to Minab city and the second one is 1500 meters after ...

Dissertation for Master's Degree in Civil Engineering, Marine Structures, Abstract: Tension-based platforms are among economic marine platforms for use in deep waters. The correct prediction of the platform's dynamic response to environmental loads is very important in its economic and safe design. In this research, the dynamic behavior of the tension base platform under the ...

Master's thesis in medical engineering, bioelectrical trend, abstract of the separation of prosthesis projections and tissue implants in sinogram images of spiral CT scan using active contour methods for metal implants such as prostheses and tooth filling materials during the reconstruction of CT images with different methods, creates an artifact that appears as light and dark ...

Master's thesis in the field of civil engineering, soil and foundation, in this research, the bearing capacity of the conical pile group and the cylindrical pile group with the same volume are calculated and compared. Due to the lack of numerical studies and modeling by software for conical piles compared to laboratory tests in this field, in this research, the modeling of the ...

Dissertation for the Master's Degree in Business Administration (M.A) Major: Marketing Abstract The aim of this research is to design a conceptual model of sustainable tourism based on sustainable marketing. This model includes independent variables of social stability, political stability, service quality, environmental sustainability, cultural sustainability, sustainable ...

Master's thesis in the field of road, building and environmental engineering - hydraulic structures. In this research, the effect of geobags on the scour control of bridge piers has been studied using Computational Fluid Dynamics (CFD) method. Geobags are geotextile bags that are filled with materials such as sand, concrete or materials from river dredging. Due to the ...

Dissertation for receiving the master's degree ""MSc"" specialization: applied chemistry Farsi abstract of the thesis or dissertation (including: summary of objectives, implementation methods and results obtained in maximum 10 lines): The possibility of manipulating matter at the nano level was first proposed in written form by Richard Feynman. During his conference called ...

Dissertation for M.Sc degree, field: chemical engineering, orientation: biotechnology, research method: first, the surface of the gold electrode was coated with nickel and cobalt salt in suitable conditions, then the standard solution of atrazine poison was placed in contact with the modified electrode, and after optimizing a series of mechanical and chemical parameters, its ...

Dissertation for M.Sc. Master's degree Abstract: Nanostructures introduced with the pioneering of fullerene and carbon nanotubes have opened new horizons in various fields of science and technology, the most important of which is the use of nanostructures in biological sciences. Silicon carbide nanostructures are considered heteroatom nanostructures that have some ionic ...

Master's Thesis in the field of Chemical Engineering Abstract Investigation of parameters affecting the production of alumina gel by sol-gel method Sol-gel method is one of the common methods that is widely used to produce different nanoparticles. In this method, a solution of initiators is mixed with water in the presence of a catalyst, and hydrolysis and polymerization ...

In order to obtain a master's degree in chemical engineering, abstract freezing of fans in operational units, including the hydrogen unit of Imam Khomeini Shazand Refinery in the cold seasons of the year is one of the important problems in this refinery. In order to provide a suitable solution to this problem, we must have a suitable estimate of the fan outlet temperature. The ...

Master's thesis in the field: Chemical Engineering Abstract In this research, a comprehensive two-dimensional model based on the Finite Element Method (FEM) is proposed for modeling gas-solvent membrane contactors to remove carbon dioxide[1] from synthesis gas. Aqueous solution of monoethanolamine has been used as absorbent solvent stream and CO2/N2 gas mixture as gas stream. ...

Dissertation to receive a Ph.D. degree in Pharmacy Persian Summary Urinary tract infection (UTI) is the occurrence of infection due to the entry and growth of bacteria in any part of the urinary system, including the organs that collect and hold and excrete urine, namely the kidneys, ureters, bladder and urethra. UTI is usually caused by the entry of bacteria that can live in ...

A master's thesis in the field of chemical engineering, abstract of the laboratory study and modeling of calcium carbonate production from calcium chloride solution by absorbing carbon dioxide from industrial exhaust gases, by the efforts of Amin Alamdari, the effect of carbon dioxide concentration on the precipitation of calcium carbonate species and the kinetics of calcium ...

Abstract Introduction: One of the most common types of fractures in the jaw and face area is the fractures of the middle area of ??the face and cheekbones, in which the anterior wall of the sinus is involved in the majority of these fractures. Following the fracture of the front wall of the sinus, soft tissue prolapse, sinusitis, rhinitis, pain and tenderness can occur when ...

Dissertation for Master's Degree in Sports Physiology Abstract: Title: The effect of menstrual cycle on selected factors of physical fitness in non-athletic high school female students Background and purpose: Women face special conditions during their life, one of them is menstruation. Cycles that repeat every 28 days and have three phases: luteal, follicular and bleeding. Some ...

Master's course in intensive care nursing Abstract Introduction: In the intensive care unit, ventilator-associated pneumonia ranks first among hospital infections. Since the role of nurses in preventing this complication is very important, the present study was conducted in order to compare the effect of two methods of face-to-face training and clinical guidelines for the ...

Dissertation for obtaining a specialized doctorate in oral and maxillofacial radiology Abstract: Introduction and purpose: The purpose of radiological evaluation of the temporomandibular joint (TMJ) is to depict suspected clinical disorders. This study was conducted with the aim of comparing the position and morphology of the condyle in symptomatic and asymptomatic patients with ...

Master's thesis in the field of chemistry, Analytical Chemistry, Abstract In this project, a molecular template polymer was prepared for the selective extraction of phenylmercury chloride. To prepare this polymer, methacrylic acid (active monomer), ethylene glycol dimethacrylate (cross-linking agent), 2,2-azobisisobutyronitrile (initiator), phenylmercury chloride (target ...

The master's thesis of precision instruments and automation in the oil industry. The introduction of the entire research is one of the important scientific, technical and economic topics, the issue of corrosion of metals and the protection of metal facilities. Investigating the topic of corrosion is not so simple and with all the research done, its factors are still not known ...

Academic thesis for obtaining a master's degree in electrical engineering, electronics orientation Abstract In this thesis, firstly, the introduction of graphene, its manufacturing method, advantages and applications in field effect transistors and the conducted research will be extracted and examined, then we will have an overview of the structure of field effect transistors ...

Master's thesis in the field of chemistry, Analytical Chemistry, Abstract In this project, a molecular template polymer was prepared for the selective extraction of furan. To prepare this polymer, methacrylic acid (functional monomer), ethylene glycol dimethacrylate (cross-linking agent), 2,2-azobisisobutyronitrile (initiator), a mixture of pyrrole (furan substitute or target ...

Master's Thesis in the field of Chemical Engineering (no orientation) Abstract of the laboratory study of the wear phenomenon of liquid containing sand in pipelines. The studied fluid consists of two phases, liquid and solid. The liquid phase is water, and sand particles form the solid phase. In this research, the parameters affecting the wear rate, including: fluid speed, sand ...

Dissertation for receiving a master's degree in chemical engineering, advanced orientation. Abstract The limitation of heat transfer fluids in various industries due to their poor thermal conductivity has caused the improvement of the heat transfer of working fluids to be considered as a new method of advanced heat transfer. So that the idea of ??dispersing solid particles in ...

Master's thesis in the field of chemical engineering, abstract of the effect of additives on crystal morphology in the crystallization process of calcium oxalate. Kidney stones are one of the most common diseases in the world, and most of its crystals are composed of calcium oxalate crystals. Therefore, it has been a long time that the investigation of effective substances in ...

Dissertation for Master's Degree in Mechatronics Engineering Persian Abstract The purpose of this project is to introduce a new approach for troubleshooting gas transmission pipelines using mechanical waves, which is much cheaper and easier than other methods. who are currently working. These lines are usually located in difficult environmental conditions and far away and in ...

Dissertation for Master's Degree (M.Sc.) Field: Chemistry Major: Organic Abstract 1,3-Indandione and its derivatives are of great interest due to their importance in organic chemistry. Many products, which are a sub-branch of 3,1-indandione, show useful and diverse biological activities such as antibacterial properties, blood anticoagulant, mouse death, painkiller, pesticide and ...

Master's Thesis of Polymer Science and Technology Engineering Abstract Urethane-acrylate resins are of interest due to their low viscosity and flame retardant properties and relatively easy curing. On the other hand, natural fibers with renewable resources, low price, low density and high special properties have a special ability to be used in composites. However, their ...

Dissertation for Master's Degree (M.Sc) Direction: Applied Chemistry Persian Summary According to international standards, the sulfur in the fuels used in the transportation industry, as one of the most important polluting industries, should be reduced to about 10 ppmw, while many refineries in the world produce fuels with a sulfur content of more than 1000 ppmw. One of the new ...

Master's Thesis of Medical Engineering, Bioelectrical Orientation Abstract: Separation of prosthesis projections and tissue implants in spiral CT scan sinogram images using active contour methods of metal implants such as prostheses and tooth filling materials during the reconstruction of CT images with different methods creates an artifact that appears as light and dark radial ...

Master's Thesis of Polymer Industry Engineering Abstract With the progress of human civilization, technology development and the ever-increasing population, the world is currently facing a problem called pollution that threatens the lives of the inhabitants of the earth. Pollution caused by the accumulation of persistent toxic compounds in soil and water, such as chemicals, ...

Master's Thesis of Polymer Industry Engineering Abstract Phenolic resins have excellent dimensional, thermal, chemical and corrosion resistance. Also, the fugitives produced during the thermal degradation of this resin have low toxicity and, in addition, they have high charring. Phenolic resins, due to having desirable properties, are used in many fields such as internal parts ...

Abstract Garlic (Allium sativum L.) is one of the most important medicinal and industrial plants of the Alliaceae family. Garlic onion prevents the proliferation of cancer cells and has antiseptic, insecticidal, anti-fungal and bacterial power, reduces blood pressure and sugar, anti-diarrhea, strengthens the digestive system, and is also used as a flavoring agent in the ...

Master's Thesis of Mechanical Engineering-Applied Design Abstract In many applications, graphene (monolayer or multilayer) is used in the polymer matrix as a composite. In this research, ideal graphene with a hexagonal bond shape between atoms, located in a polymer matrix, with different boundary conditions, including gripped and simple, under biaxial external compressive ...

Dissertation for Master's Degree in Applied Design Mechanics Abstract: Composites have received a lot of attention in recent decades due to their high strength and low weight. Such materials can fail due to static, impact, dynamic loading, etc., and the various failures that occur can cause a severe drop in strength in the structure. Engineers always think of using different ...

The thesis for obtaining a master's degree in the field of agriculture was carried out in order to investigate the effect of planting date and density on the growth characteristics and yield of experimental potato cultivars during 2013 in Mojn city of Shahrood city. The experiment was carried out in the form of factorial split-plot design based on randomized blocks in three ...

Master's degree in electrical engineering, electronics, abstract, accurate measurement and control of temperature in industrial and research systems is of particular importance, and the correct operation of some industrial and laboratory tools is possible only in a specific location with a small number of channels (maximum 8 channels). Therefore, the decision was made to build a ...

A Master's Thesis in the field of Animal Science- Animal Physiology Abstract: The effect of adding dry citrus pomace powder on the reproductive performance of old broiler chickens with the aim of improving egg quality and sperm penetration into the vitelline layer and increasing fertility. The number of 36 broiler chickens of the Cobb 500 strain and their 12 hens of the same ...

Dissertation for Master's Degree in Plant Production Engineering - Horticultural Science Orientation Abstract This research has been done for the first time in the world to show the effects of low temperatures and its duration on the germination percentage and the amount of seed vigor. To perform this test, pollen grains of 3 early flowering, medium flowering and late flowering ...