Download more than 100 examples of thesis, proposal and project topics about vertical axis wind turbine in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Dissertation for M.Sc. Mechanical engineering trend - applied design In this research, a wind turbine with a vertical axis of the Savonius model is modeled. The wind turbine has been modeled in the fluid control volume, which is the same as the wind tunnel in real conditions, and has been investigated under wind blowing with different speeds. Also, in terms of overlap ratio, it ...
Dissertation for the Master's degree ""M.Sc"" in Mechanical Engineering - Energy Conversion. Abstract In this thesis, experimental analysis along with numerical simulation has been carried out to investigate the performance of Savunius vertical axis wind turbine. In order to carry out the tests, the turbine was tested in the subsonic wind tunnel. In order to check the accuracy ...
Master's thesis in the field of electrical engineering - power abstract of the possible analysis of dynamic stability of microgrids, considering wind turbines, in recent years, the high penetration of renewable energy sources, especially wind energy, in power networks has created new problems. One of the most important issues is the uncertainty in the power produced by wind ...
Master's thesis in the field of electrical engineering (power trend) Abstract of the investigation of transient electromagnetic states in wind turbines with the increasing development of wind turbines, increasing its efficiency has become more critical. One of the factors for measuring wind turbine efficiency is its performance in transient state problems. The phenomena that ...
Electrical Engineering Master's Thesis - Power Abstract Wind is a suitable and powerful source of energy. Power generation in a variable speed wind turbine is an interesting topic. Because in wind energy converter systems, maximum utilization can be achieved at any speed. But this system needs its parameters to calculate the optimal speed of the turbine. In this thesis, a ...
Dissertation for receiving a master's degree in the field of electricity - the tendency of electric machines. Abstract In this thesis, the behavior of the wind power plant is investigated using the detailed model of induction generator with two-way feeding. Electronic converters of the power plant and its control systems and the behavior of the power plant include electrical and ...
Dissertation for M.Sc Mechanical Engineering - Energy Conversion Trend Abstract In the last century, with the increasing demand for energy and the reduction of fossil fuel resources, the role of renewable energy in the progress and development of countries is not hidden from anyone. In the meantime, wind energy has a special share and has the highest growth rate among other ...
Dissertation for M.Sc Master's Degree, Mechanical Engineering - Applied Design Abstract Modern wind turbines today tend to vibrate a lot due to their elastic, long and narrow structure. Therefore, all components of wind turbines should be subjected to vibration and modal analysis in the design stages, and their natural frequencies should be reviewed with turbine excitation ...
Dissertation for Master's Degree in Power Electricity Chapter 1 Overview of Wind Energy and Wind Turbine Preface Energy supply and demand in the world has become one of the most important issues of the day, so that the world will be seriously affected by it until the end of the 20th century and even after that. Fossil energies such as oil, gas and coal are facing a new big ...
Dissertation for master's degree in the field: Power Electrical Engineering Abstract Due to the extent and complexity of distribution networks, the probability of an accident occurring in them is very high, and the occurrence of an accident can affect many subscribers. Therefore, reliability is one of the key parameters determining the success rate of the system in providing ...
Master's Thesis in Civil Engineering - Earthquake Engineering 1391 Abstract Structures with frames with coaxial braces are among earthquake resistant systems. These structures are widely
Master's thesis in the field of civil engineering, soil and foundation, in this research, the bearing capacity of the conical pile group and the cylindrical pile group with the same volume are calculated and compared. Due to the lack of numerical studies and modeling by software for conical piles compared to laboratory tests in this field, in this research, the modeling of the ...
Abstract Photovoltaic or PV for short is one of the types of electricity generation systems from solar energy. In this method, by using solar cells, direct production of electricity from sunlight becomes possible. Solar cells are semi-conductors that are made of silicon, the second most abundant element in the earth's crust. When sunlight shines on a photovoltaic cell, a ...
Dissertation for Master's Degree in Energy Conversion Mechanical Engineering Abstract: Fluid propulsion vector orientation has emerged as an important technology for high performance air vehicles. This technology can improve the maneuverability of the aircraft by changing the nozzle flow and its deviation from its axial direction. The purpose of this study is to investigate the ...
Dissertation for receiving a master's degree in the field of agricultural engineering-horticulture (flowers and ornamental plants) Electromagnetism with a short wavelength and a very high number of oscillations (frequency) is between 300 MHz and several GHz per second. In this research, from the 2M226 magnetron with a wavelength of 12 cm, radiating waves in the frequency band of ...
Dissertation for master's degree in electrical engineering, power orientation Abstract: The use of renewable energy to produce electrical energy has increased increasingly with the expansion of the use of flexible alternating current transmission systems (FACTS), to compensate for the quality of power and voltage, the range of use of these energies has increased.
Dissertation for obtaining a master's degree in the field of electrical engineering, power orientation Abstract Wind energy will be one of the important sources of electricity in future systems. In this work, an overview of wind energy power electronic control is provided and the development of modern power electronic components is also briefly reviewed. The application of power ...
Dissertation for Master's Degree in Civil Engineering - Soil and Foundation Mechanics Abstract The purpose of this research is to improve the mechanical and geotechnical properties of windy sand soils. Because one of the major problems of windblown sand is its low resistance under natural and saturated moisture conditions, a laboratory study was conducted to investigate the ...
Master's Thesis of Electrical Engineering - Power Abstract: Induction motor condition monitoring is an absolutely necessary and important technology to detect various defects at the initial stage. which can prevent the spread of unexpected defects in the initial stages. Approximately 30-40% of induction motor defects are related to stator defects. In this thesis, a comprehensive ...
Dissertation of the master's course in electrical field (M. Sc) orientation: power Abstract: In this thesis, electrical and mechanical defects in electric machines are examined and the factors that cause them and the methods of fixing these defects are stated. After that, with the help of the winding function method of the simulation machine and the intended error, i.e. the ...
Master's Thesis in Electrical Engineering (M. S. C) Major: Power Abstract At present, fossil resources are rapidly running out, and with increasing concern about air pollution and global warming, experts are thinking of using cleaner energy sources and more compatible with the environment. Among these, wind power and solar energy are two types of huge renewable energy sources. ...
Master's Thesis in Electrical Engineering, Power 1-1 Introduction Energy supply sources in the last few decades have been from fossil sources, which until recently have been obtained almost cheaply. Cheap energy sources caused that the optimal use of energy and energy recycling were practically not paid much attention. Due to the energy shortage crisis and the sense of danger ...
Dissertation for Master's Degree in Electrical Engineering, Power Systems, Abstract: In this thesis project, a new analytical approach is proposed for planning electric energy production and determining the amount and location of storage of rotating storage corresponding to the risk level of subscriber load points through profit/cost analysis in the optimization program for the ...
Dissertation of the Master's course in the field of electricity (M. Sc) orientation: power Abstract: In this thesis, electrical and mechanical defects in electric machines are first examined and the factors causing them and the methods of fixing these defects are stated. After that, with the help of the winding function method of the simulation machine and the intended error, ...
Master's Thesis in Electrical Engineering (M. Sc.) Power Orientation Abstract - Nowadays, due to environmental and economic reasons, the trend of using renewable energies, especially wind turbines, to produce electricity has increased in different countries of the world. On the other hand, the production power of wind turbines depends on the wind speed, and due to the ...
Master Thesis (M.Ss) Abstract The desire to use distributed generation (DG) resources is increasing day by day due to their numerous advantages. The disproportion between the consumption load and the production power will cause the power systems to be operated close to the corresponding nominal capacity, which will seriously aggravate this issue by using FACTS control tools with ...
In order to receive a master's degree in civil-soil and soil engineering in March 2013, abstract, different methods are used to stabilize pits, among them nailing method and ink method.
Dissertation for master's degree in civil-structural field winter 2012 Abstract In recent years, the number of buildings that have suffered damage due to the loss of their gravity-bearing members has increased. Therefore, it has become important to design structures so that they are resistant to progressive damage in addition to the effects of earthquakes. One of the factors ...
Academic Thesis in Master's Degree in Architectural Engineering, First Semester of 1992-1993 Abstract: The purpose of this discussion is to examine the concept of cultural centers and the importance of its existence in the intellectual and moral education of young people, a large part of which
Dissertation for Master's Degree (M.A) in the field of Natural Geography, Climate Hazards Abstract Dust storms are destructive weather phenomena that cause irreparable damage to urban areas, fields, facilities, roads, etc. every year. This phenomenon is affected by special weather conditions, and if the mechanism of its development and expansion is known, it is possible to ...
Dissertation for Master's Degree (M.Sc) Field: Natural Geography - Applied Climatology Abstract Due to its location in a special geographical location, topographic conditions and climatic systems affecting the region, the city of Kavus has a relatively cold climate. So that the air temperature in the coldest month of the year reaches 9.2 degrees Celsius and has the highest ...
Dissertation for the Master's degree ""M.A"" Field: Geography and Urban Planning Abstract: Today, with the expansion of cities and the growth of urbanization, as well as the increase in problems and dilemmas caused by this process and the importance of finding integrated management and balanced, comprehensive and sustainable development of the city, the discussion of improving ...
Dissertation for Master's Degree in Electrical Engineering, Power Systems, Abstract: In this thesis project, a new analytical approach is proposed for planning electric energy production and determining the amount and storage location of rotating storage corresponding to the risk level of subscriber load points through profit/cost analysis in the optimization program of shared ...
Dissertation for Master's Degree in Electrical Engineering (M.Sc) Abstract The power system stabilizer is added to the excitation system in order to improve the damping of the power system during low frequency disturbances. For large-scale power systems that include a large number of connected generators, setting the power system stabilizer parameters will be a complex and ...
Dissertation for Master's Degree in Electrical Engineering, Power Systems, Abstract: During the last two decades, the electricity industry has undergone fundamental changes in the way it is produced, transmitted and distributed, which is referred to as restructuring. With the restructuring in the electricity industry, reactive power has been introduced as one of the most ...
Dissertation for receiving a master's degree, field of study: electricity-power, orientation: electric machines in a synchronous generator, a dc current is applied to the rotor coil to produce a magnetic field. Then the rotor of the generator is rotated by a prime mover to create a rotating magnetic field in the machine. This magnetic field induces a three-phase voltage in the ...
Dissertation for master's degree in electricity, power orientation Abstract: The production of electrical energy for power systems with the aim of minimizing the total cost of production for active units in the power network is one of the most important topics for today's modern systems. In other words, the purpose of economic load distribution is optimal and appropriate ...
Abstract The main task of the synchronous generator excitation system is to provide the necessary voltage for the generator excitation winding. The excitation voltage is a dc voltage and it is used to create a flux in the excitation winding of the generator and consequently to produce a magnetic field to produce electrical energy by a synchronous generator. In the provided ...
In order to obtain a master's degree in the field of civil engineering - soil and foundation orientation, Abstract Nowadays, circular foundations are more or less used for structures, especially structures that have axial symmetry. In this research, a numerical study was conducted on bearing capacity and settlement of annular foundation. PLAXIS software was used for modeling. ...
Master's Thesis (M.sc) Civil Engineering, Soil and Foundation Mechanics Abstract In this research, the stability of soil reinforced with geogrid located on an underground cavity was analyzed using plaxis software, and the effect of several factors such as the number of geogrid layers, the length of the geogrid layer, the stiffness of the geogrid layer, the optimal location of ...
Master's Thesis of Structures Abstract In the welding process, after a stage of cooling of the body, due to the uneven distribution of temperature, stresses remain in it, which are called residual stresses. To obtain these stresses, the temperature history of the object during the welding process must be available. For this purpose, first a thermal analysis is done to obtain the ...
Dissertation for Master's Degree in Civil Engineering, Marine Structures, Abstract: Tension-based platforms are among economic marine platforms for use in deep waters. The correct prediction of the platform's dynamic response to environmental loads is very important in its economic and safe design. In this research, the dynamic behavior of the tension base platform under the ...
Dissertation to receive M.Sc degree in civil engineering, structural orientation. Abstract: One of the ways to strengthen the building against lateral loads is the use of a wind system (convergent or divergent). The increasing use of steel braces to deal with earthquake forces requires that the seismic performance of these types of systems be given more attention. The common ...
Dissertation of Master's Degree in Civil Engineering - Structure Abstract In metal structures, one of the most important places of stress concentration is the joint. In form cutting, the shear force at the connection point is so high that a part of the beam or its reinforcement is broken and separated in pieces, and this is due to negligence in the design of the connection or ...
Dissertation for receiving a master's degree in the field of: Power Electricity, the increase in the presence of non-linear power electronic loads in distribution networks, on the one hand, and the ongoing changes in distribution networks, such as the presence of scattered production sources and the possibility of forming power microgrids [1], have increased the need for new ...
Abstract of the social-political events that occurred in the contemporary history of Iran after the Second World War was the beginning of the chapter that opened the feet of romanticism and then the footnote literature to the daily life of Iranians. The 14th century is one of the dynamic periods of Iranian literature, a literature whose approach is mostly social. The events that ...
Abstract The reduction of fossil fuel resources, adverse environmental effects and low efficiency of traditional power grids have increased the desire to produce electricity near the load and the level of the distribution network using renewable sources. One of the basic solutions to solve the problems raised is the use of microgrids. A set of small sources of energy production ...
Civil Engineering Master's Thesis, Soil and Foundation Engineering Abstract In this thesis, in order to analyze the behavior of surface foundations based on reinforced soil, a simple physical method based on the resistance of materials called ""cone method"" is used, which is actually used as an alternative to the exact solution methods that are based on the three-dimensional ...
Master's thesis in the field of civil engineering, soil mechanics, and abstract excavation projects in urban areas are always at risk. Therefore, a suitable safety margin should be considered in the design of the guard structure. Traditional slope stability assessment methods, which are usually based on empirical judgments such as the concept of confidence factor and limit ...
Physical Education and Sports Science Thesis for Master's Degree Abstract: Background and Objective: The purpose of this study is to determine the effect of 8 weeks of intense training with and without water extract (red and black oleander) on plasma and liver neuropeptide w levels, cortisol and plasma T4 hormones in male rats. Materials and methods: In this experimental study, ...
Dissertation for receiving a master's degree in the field of civil engineering, structure orientation. Abstract: Today, many reinforced concrete structures that are in operation are more than 75 years old and have been damaged due to natural disasters such as earthquakes and wind, or due to material fatigue or corrosive factors. Maintenance of structures is very important due to ...
Master's Thesis in Civil Engineering (Soil and Foundation) Abstract Dense sand piles have been used since 1950 in Japan and then in other countries of the world as one of the most effective and economical methods in strengthening soil in order to prevent liquefaction, increase bearing capacity and improve soils with different grain sizes. The process of implementing dense sand ...
Master's Dissertation in Electrical Engineering (M.Sc.) Focus: Power Abstract Reliability in any system is a concept that refers to the safe and reliable operation of the system. Although this concept is undefined in most systems such as electrical, mechanical, pneumatic, etc., it is of interest to designers and consumers, but with the advancement of technology and the increase ...
Dissertation for receiving a master's degree in electrical engineering, electronics orientation. Chaos theory was founded at the end of the 20th century by Lorentz. Chaos science investigates non-linear systems and their behavior in different conditions. Since the systems around us are mostly non-linear, by creating feedback in them, they may show chaotic behavior, so chaos ...
Master's Thesis in the field of power, power electronics, power electronics, abstract. Distributed generation power plants have a production capacity of several kilowatts to 10 megawatts, which are used to produce electric energy in places close to consumers. Among their types, we can mention solar cells, fuel cells, micro turbines, wind power plants, etc. If these power plants ...
Master's Thesis of Power Electricity Abstract: Photovoltaic energy is one of the clean and efficient energies that is expanding rapidly. With the increase in the penetration percentage of these power plants in the power grid, problems arise that may lead to errors and problems in the distribution system. One of the problems that may occur is the issue of voltage increase at the ...
Master's Thesis of Chemical Engineering-Biotechnology Abstract The deteriorating energy sources of fossil fuels will make the developing human society suffer from fuel shortage in the not too distant future. As a result, the concerns of the continuous and increasing release of carbon dioxide into the atmosphere, as well as the extent of pollution caused by fossil fuels that have ...
Dissertation for Master's Degree (M.Sc.) Orientation: Power Abstract In recent years, with the advances made in data processing and transmission technology, distribution companies are more and more interested in using distribution automation systems. One of the most effective users of automation is the renewal of the distribution network, which is often analyzed as an ...
Dissertation for receiving a master's degree in the field of: Power Electricity Abstract The increase in the presence of non-linear power electronic loads in distribution networks on the one hand and the ongoing changes in distribution networks such as the presence of scattered production sources and the possibility of forming power micro-grids[1] have increased the need for new ...
Master's Thesis of Electrical Engineering - Power Abstract Microgrids are networks with small scales at the low voltage level, which are used to supply thermal and electrical loads to small places and places that do not have access to the main power grid. Microgrids are used to supply energy to all types of consumers such as household, industrial and agricultural, and their cost ...
In order to obtain a master's degree in the field of mechanical engineering, energy conversion, abstract: In this thesis, the mass and heat transfer by integral method in the flow of natural displacement of a fluid with a very low frontal near the wavy inclined wall and under the magnetic field has been investigated. The wall is permeable and as a result, the fluid can be sucked ...
Dissertation for Master's Degree in Mechanical Engineering Abstract: Nowadays, due to the increase in population in big cities, building high-rise buildings and residential towers may seem inevitable. But in locating these types of buildings and placing them together, a series of environmental requirements must be observed. In this thesis, an attempt has been made to re-evaluate ...
Dissertation for Master's Degree Abstract Today, preventing losses caused by blackouts and undistributed energy is very important. Therefore, one of the most important issues in the operation of the distribution network is the renewal of the load, which has a great impact on the constant service to the subscribers. When a part of the network is cut off due to an error or ...
Dissertation for Master's Degree in Power System Abstract: The trend of reducing fossil fuel resources, adverse environmental effects and low efficiency of traditional power grids has increased the tendency to produce electricity near the load and the level of the distribution network using renewable sources. One of the basic solutions to solve the problems raised is the use of ...
Dissertation for Master's Degree in Electrical Engineering (M.Sc) Major: Power System Abstract Stabilizer is added to the excitation system in order to improve the damping of the power system during low frequency disturbances. For large-scale power systems that include a large number of connected generators, adjusting the power system stabilizer parameters will be a complex and ...
Dissertation for master's degree in Applied Design-Dynamics and Control Abstract: Transverse instability is one of the common problems in high-speed rail vehicles, which occurs on rails without arches and due to the friction-creep nature of wheel-rail contact that creates non-conservative forces in the system. This phenomenon is called hunting, which is a type of ...
A master's thesis in the field of electrical-power engineering. Time series load distribution. In this research, the application of time series models in the power system is discussed. Time series are used to model different power grid parameters and in various applications. These models are able to consider the time correlation of power grid variables. According to the modeling ...
Dissertation for the M.Sc. In the field of electrical engineering, power electronics, abstract: The material that is analyzed in this thesis in order to simulate and implement the buck converter nonlinear controller is presented in four chapters. In general, the buck converter and the relationships governing it and the studies conducted on the buck converter and a control method ...
Dissertation for Master's Degree in Mechanical Engineering Field: Applied Design Abstract In this thesis, stability analysis of composite beam reinforced with carbon nanotubes on elastic support under axial force is investigated. The distribution of nanotubes is assumed to be uniform[1]. To determine the properties of materials reinforced with nanotubes, the results of molecular ...
Master's Thesis in Electrical Engineering (Power) Abstract Optimum placement of fault current limiters in microgrids in order to improve service continuity due to the increase in consumption demand and the ever-increasing penetration of scattered production sources into the power network, production and distribution systems are becoming more and more complex. Connecting these ...
Submitted for Master's Degree Submitted for Master's Degree Abstract In addition to lateral instability, one of the major threats to passenger cars, especially SUVs, is the risk of overturning. In this thesis, a coordination strategy based on fuzzy logic is designed for the integrated operation of active steering, differential, brake and anti-roll bar subsystems. Separate ...