Download more than 100 examples of thesis, proposal and project topics about two dimensional metal objects in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Master's Thesis of Electrical Engineering-Communications Wave Orientation Abstract In this thesis, identification of the position and shape of two-dimensional metal objects by optimization[1] of the cost function[2] with the help of the level setting method[3] and the simulation results are presented. In this method, we were able to obtain the shape and position of the objects ...
Master's thesis in the field of mining chemistry Abstract: In this study, the effect of amide substitution on the surface of graphene oxide was studied. Two amines were chosen to change the contact surface and absorption rate. of a linear diamine such as ethylenediamine[1] and cyclic amine 6-aminouracil[2] with two different characteristics were evaluated. After the synthesis ...
Master's thesis in medical engineering, bioelectrical trend, abstract of the separation of prosthesis projections and tissue implants in sinogram images of spiral CT scan using active contour methods for metal implants such as prostheses and tooth filling materials during the reconstruction of CT images with different methods, creates an artifact that appears as light and dark ...
Dissertation for Master's Degree in Chemical Engineering Abstract According to reports, heterogeneous photocatalysts are suitable for photodegradation of polluting compounds. Many semiconducting metal oxides such as: TiO2, SnO2, ZnO2, etc. can be used as photocatalysts in water splitting reactions, synthesis of organic compounds and removal of wastewater pollution. synthesized ...
Master's Thesis of Medical Engineering, Bioelectrical Orientation Abstract: Separation of prosthesis projections and tissue implants in spiral CT scan sinogram images using active contour methods of metal implants such as prostheses and tooth filling materials during the reconstruction of CT images with different methods creates an artifact that appears as light and dark radial ...
Master's Thesis on Energy Conversion Abstract: Increasing heat transfer as well as increasing the efficiency of energy storage systems due to the limitation of natural resources and with the aim of reducing costs has always been one of the most basic concerns of engineers and researchers. This is especially important in fluids due to the small thermal conductivity coefficient. ...
Master's thesis in the field of mechanical engineering (applied design trend) Abstract of the study of the deterioration of non-isotropic TWB sheets under the hydroforming process. During the research, four different metals of aluminum alloys 6111-T4, 5083-H18, 5083-O and dual-phase steel DP590 and two spherical tensile tests and simple uniaxial tensile tests were used. Then we ...
Dissertation for M.Sc degree, specialization: manufacturing and production, abstract in this thesis, how to improve the properties of plastics with the help of heat treatment. First, we will talk briefly about polymers, plastics and their sub-branches and heat treatment on them, and then we will discuss the effect of annealing heat treatment on heavy polyethylene sheets that are ...
Master's Thesis of Islamic Arts, metal specialization Abstract: Art suffered stagnation and decline in the early centuries of Islam's arrival in Iran due to the instability of the governments. However, the 3rd to 5th centuries of Hijri were a fruitful era in all cultural aspects including Islamic art. This part of history played a significant role in the formation, expansion and ...
Dissertation to receive master's degree in organic chemistry Keywords: Farsi: Besparash, condensation, composite, nanocomposite, anchoring Nitrogen in bonding with metals can destroy them
Dissertation for receiving master's degree in mechanical engineering, the trend of manufacturing and production of complex industrial products from metal pipes with the aim of increasing the strength-to-weight ratio of structures and especially reducing the fuel consumption of vehicles has attracted the attention of industrialists in recent years. In this regard, one of the new ...
Master's Thesis in Mechanical Engineering (Applied Design) Abstract of three-dimensional interlayer stress investigation in mechanical connections in layered composite materials The purpose of this thesis is to investigate three-dimensional interlayer stresses in mechanical connections in layered composite materials. For this purpose, finite element method and ABAQUS software ...
Master's thesis of Ardakan Shahrivar Faculty of Art and Architecture 2013 During the Safavid era, Shah Ismail declared the Shia religion as the official religion of the Safavid dynasty. Continuity and long life of this dynasty and strength
Chapter 1 1-1-Introduction: Common fluids such as water, oils and ethylene glycol, which are usually used as heat transfer media, have a limited ability in terms of thermal properties, which is the first obstacle to compress and increase the efficiency of heat exchangers. One of the ways to improve heat transfer is to add particles to the fluid. This method is used for fluids ...
Thesis for obtaining a master's degree in the field of business management, orientation: internal, abstract: management research emphasizes the importance of the role of business models in improving organizational performance. In recent years, we have seen the business field become more competitive in various industries. According to business researchers, achieving a suitable ...
Doctoral thesis in the field of computer engineering (artificial intelligence) Abstract Understanding and extracting information from images and videos is the common thread of the majority of problems related to machine vision. Finding the main and useful parts of a movie and modeling the actions between these parts is one of the main goals of movie analysis. In the last decade, ...
Abstract In recent years, there have been vast advances in the field of image sensors and digital imaging systems, but still theoretical and practical limitations affect the resolution of images taken with these cameras. Super resolution techniques have been developed in recent years to overcome these limitations. These techniques create a higher resolution image by using one or ...
To receive a master's degree in textile technology engineering. Abstract In the previous research, multi-sized nano-roughness was developed using nanoparticles with different sizes and different surface charges along with silicone resin coating to produce multi-purpose textiles with stable properties. In this research, the idea of ??using laser irradiation and finishing textiles ...
Academic Dissertation for Master's Degree in Visualization Foreword I have been a native of the marginal area of ??Halil Road for several years. I remember that on every hill or height we saw a pit dug and a large number of broken bones and pottery, which sometimes had patterns on them, and it was also heard many times that a person or people dug a place and pulled out objects ...
Master's thesis (M.A) in the field of visual communication. Lorestan and Timreh are among the very rich areas of petroglyph art in Iran, where many collections have been identified. So far, no graphic and conceptual analysis has been done on these motifs. Among the most important things that have involved the researcher's mind: the motivation to record motifs, the identity of ...
Dissertation for Master's Degree in Computer Science Abstract Nowadays, in many fields, we need devices that can identify people's computers and recognize them based on their body characteristics. Face recognition system as a biometric system is basically a pattern recognition system that recognizes a person based on the vector of specific physiological characteristics or ...
Dissertation for Master's Degree in Artificial Intelligence Abstract One of the most complex tasks in digital image processing is image segmentation. Due to increasing attention to this technique by researchers and turning it into a vital role, it is used in many practical fields such as medical applications. Today, in modern dentistry, techniques based on the use of computers, ...
Dissertation in Master's Degree in Handicrafts, Traditional Arts Research, Abstract: The making of metal objects has always been the focus of past civilizations, among which we can mention the manufacture and production of weapons. In many cases, the makers of weapons reflected the tastes, opinions and worldview of their people and culture in the form of various decorations on ...
Master's Thesis (M.sc) Civil Engineering, Soil and Foundation Mechanics Abstract In this research, the stability of soil reinforced with geogrid located on an underground cavity was analyzed using plaxis software, and the effect of several factors such as the number of geogrid layers, the length of the geogrid layer, the stiffness of the geogrid layer, the optimal location of ...
Dissertation for Master's Degree in Civil-Structural Engineering Abstract In our country, most of the structures and maybe all the conventional buildings are analyzed and designed independently, which means that these structures are mainly analyzed and designed by conventional software and considering a rigid or articulated support, and then the forces obtained at the base of ...
Master's Thesis in Civil-Soil Field Abstract Dense clay layers are used as one of the most common impermeable layers in most geotechnical structures such as earthen dams and municipal and radioactive waste disposal centers. Due to special geotechnical characteristics, these layers are damaged by cracking during their lifetime, these cracks increase the permeability of the layer ...
A master's thesis in the field of electrical engineering - field telecommunications, abstract, investigation and analysis of leaf reflective structures in the field of plasmonics for the application of passive components in the design of optical integrated circuits, limits the diffraction limit of the miniaturization of optical elements. Surface plasmon polaritons that propagate ...
Industrial Management Doctoral Dissertation, Production and Operations, Abstract: The global automobile industry has grown a lot in recent decades compared to other industries. Every day, the intensity of competition in this industry increases to gain global market share. Iran's automobile industry has also taken effective steps to gain global market share through exports. In ...
Master's Thesis in Computer Engineering (Artificial Intelligence) Abstract Extracting useful patterns from data sets is one of the challenging topics in data mining. On the other hand, in high-dimensional data, extracting a small set of emerging patterns with strong predictive ability is one of the important issues in creating a classifier based on emerging patterns. In the real ...
Master's Thesis in Computer Engineering - Software Orientation Abstract Clustering can be considered one of the most important steps in data analysis. Many clustering methods have been developed and presented so far. One of these methods that has been studied in recent studies is consensus clustering method. The goal of consensus clustering is to combine several initial ...
Dissertation for Master's Degree in Computer Engineering - Artificial Intelligence Abstract Data clustering is a method for classifying similar data, which has been used for many years in various sciences and many algorithms have been designed in this field. Recent clustering research leads to hybrid methods that are more robust and accurate. Hybrid clustering tries to first ...
Dissertation for Master's Degree in Physical Education Abstract In recent developmental research, lifelong growth has been investigated. Motor development and cognitive development are two different categories, but they interact with each other. The aim of the present study was to investigate the relationship between body mass index and mental rotation in active and inactive ...
Field of study: Electricity, specialization: Telecommunication. Dissertation Abstract In this thesis, the problems of multi-objective and multi-sensor tracking are investigated using the rule of random particle collection. The regression probability density hypothesis (PHD) is implemented dynamically. This dynamic mode is performed by combining the transfer bias value with the ...
Tendency of soil mechanics and foundations. Abstract: Investigating the behavior of soils due to different loadings is one of the most important issues in geotechnical engineering. The behavior of soils depends on several parameters such as grain size, grain type, loading method, stress history, etc. Non-alignment of main stress and main strain directions is a phenomenon that ...
Introduction In today's era, the presence of waste materials resulting from various physical and chemical processes is one of the important problems of industrialized and developing countries. So that extensive research is being carried out for methods of recycling or disposing of them to minimize the damage to the environment. In this regard, construction researchers, like ...
Master's Thesis / Inorganic Chemistry Abstract Considering the application of nonlinear optical properties (NLO) in technologies such as lasers, remote communication, photovoltaic cells, information processing and holography and the mineral diversity of these materials, we started a research in this field and focused on borazine-containing dyes. Our main goal in this research is ...
Master's Thesis in the field of Chemical Engineering Abstract Investigation of parameters affecting the production of alumina gel by sol-gel method Sol-gel method is one of the common methods that is widely used to produce different nanoparticles. In this method, a solution of initiators is mixed with water in the presence of a catalyst, and hydrolysis and polymerization ...
Master's thesis in the field: Chemical Engineering Abstract In this research, a comprehensive two-dimensional model based on the Finite Element Method (FEM) is proposed for modeling gas-solvent membrane contactors to remove carbon dioxide[1] from synthesis gas. Aqueous solution of monoethanolamine has been used as absorbent solvent stream and CO2/N2 gas mixture as gas stream. ...
Master's thesis in the field of chemical nanoengineering Abstract The synthesis of silicon dioxide nanoparticles from silicon oil waste using the synthesis method of silicon dioxide nanoparticles [1] has many industrial applications. The industrial use of these particles in traditional fields as well as new fields is expanding, for which new applications are continuously found. ...
Master's degree thesis in the field: Chemical Engineering Abstract In this project, an attempt was made to take a small step towards the synthesis of silicoaluminophosphate molecular sieve in nano dimensions and its use in fuel cells with methanol fuel. Therefore, in this way, nano silicoaluminophosphate was produced under optimal hydrothermal conditions. Next, XRD, FT-IR, SEM ...
Chemical Engineering Master's Thesis Abstract: In this research, a method for the synthesis of ZSM-5 nanozeolite was presented. Then this nanozeolite was modified with CTAB surfactant and its characteristics were investigated using XRD, FT-IR, and SEM methods. This nanozeolite was used to prepare a modified carbon paste electrode (SMNZ/CPE) to measure sulfate anion. Also, the ...
Thesis for receiving a master's degree in mining engineering - mineral processing trend. The abstract of the Golghar Sirjan complex magnetite processing plant includes three circuits of dry crushing and classification, dry magnetic separation and crushing and more magnetic separation. The tonnage of the incoming feed to the factory is 450 tons per hour and the tonnage of the ...
Master's Thesis in Mechanical Engineering, Applied Design, Abstract In this research, an analytical solution is presented to show the size dependence and the effect of temperature difference on nonlinear free vibrations and post-buckling behavior of microtubes containing current. Based on Euler-Bernoulli model, strain gradient theory, Couple's stress theory and von-Carman ...
Dissertation for receiving a master's degree in the field of preservation and modification. Abstract In this research, the effect of combined modification of colloidal silver-hot water on the heat transfer from the hot press plates to the heart of the beech (Fagus orientalis) chipboard cake, the physical and mechanical properties of the chipboard and the chemical changes of the ...
Thesis for obtaining a master's degree in the field: Chemistry, specialization: Analytical Chemistry, Abstract In recent years, the use of nanotubes as nanocarriers for drug delivery has been researched. In this research, carbon nanotubes CNT(5-5), CNT(0-6), BNNT(0-6) and BNNT(5-5) doped with Ga have been used. First, the nanotubes were drawn using Gauss View and Nanotube ...
Master's Thesis of Mechanical Engineering-Applied Design Abstract In many applications, graphene (monolayer or multilayer) is used in the polymer matrix as a composite. In this research, ideal graphene with a hexagonal bond shape between atoms, located in a polymer matrix, with different boundary conditions, including gripped and simple, under biaxial external compressive ...
Master's Thesis for Master's Degree Abstract In recent years, there have been vast advances in the field of image sensors and digital imaging systems, but still theoretical and practical limitations affect the resolution of images taken with these cameras. Super resolution techniques have been developed in recent years to overcome these limitations. These techniques create a ...
Abstract Improving the active surface model by using optimization of energy functions for segmentation of 3D images, detecting the boundary and exact surface of objects in 2D or 3D images is considered one of the most important and complex issues in the field of image processing, which has many applications in the fields of machine vision, including object tracking, surface ...
Master's Thesis in the field of electrical engineering - field telecommunications, abstract, investigation and analysis of leaf reflective structures in the field of plasmonics for the application of passive components to Omidreza Daneshmandi's effort in designing optical integrated circuit limits the diffraction limit of miniaturization of optical elements. Surface plasmon ...
Master's Thesis in the field of electrical engineering, electronics, abstract of the time response and circuit model of an optical detector based on the structure of graphene layers-graphene nanoribbon-graphene layers. The purpose of this research is to present the time response of an optical detector based on graphene layers and graphene nanoribbon. The need to increase the ...
Master's Thesis of Electrical-Communication Engineering Abstract Production and amplification of radio frequencies [1] is the heart of satellite communication and optical electronics applications. The telecommunications industry is looking for smaller and more efficient RF amplifiers at higher frequencies. Nanostructures meet these needs due to their unique characteristics. In ...
Dissertation for M.Sc. Mechanical Engineering - Manufacturing and Production Trend Abstract The manufacture of square and rectangular pipes has received more attention due to their wide use in industries that require high pressure and temperature. There are different methods for making rectangular tubes, including extrusion, stretching and pressing. Another method that has been ...
Mechanical Engineering Master's Thesis - Energy Conversion One of the ways to reduce energy consumption for underwater devices is to reduce the drag on these devices. The nose of underwater objects is one of the most important parts of these objects in dealing with currents. By optimizing this part, the drag can be reduced by controlling the boundary layer of the fluid, by ...
Dissertation for Master's Degree in Mechanical Engineering Field: Applied Design Abstract In this thesis, stability analysis of composite beam reinforced with carbon nanotubes on elastic support under axial force is investigated. The distribution of nanotubes is assumed to be uniform[1]. To determine the properties of materials reinforced with nanotubes, the results of molecular ...
Abstract: Research in the field of heat transfer of suspensions with nanometer-sized solid particles in the base fluid has started in the last decade. Recent research in the field of nanofluids has shown that the addition of nanoparticles causes a significant increase in the heat transfer of the suspension. Another common way to improve the thermal performance of devices is to ...
Dissertation for Master's Degree in Rock Mechanics Abstract The unexpected stress intensity factor of some engineering structures has caused a lot of financial and collateral damage. In investigating the causes of failure, researchers gradually found that the design of many of these structures was correct based on the theory of elasticity and resistance of materials, and the ...
Dissertation in order to receive a Master's Degree in Rock Mechanics Abstract In open pit mining where many steps are created, it is necessary to conduct stability studies of the wall slope. By increasing the slope angle of the mine, the ratio of tailings removal is reduced, which will save the overall costs of the mine, but on the other hand, it will reduce the safety, in case ...
Master's Thesis on Energy Conversion Abstract: Increasing heat transfer as well as increasing energy efficiency due to the limitation of natural resources and reducing costs has always been one of the most basic concerns of engineers and researchers. This is especially important in fluids due to the small thermal conductivity coefficient. One of the most important ways to ...
Master's Thesis in the field of Mechanical Engineering - Energy Conversion Abstract Numerical investigation of fluid flow and heat transfer on mesh plates with cross holes under discontinuous suction Introduction 1-1- Fluid flow on mesh plates The urgent need of modern humans to use different fuels and the problem of environmental pollution caused by improper and indiscriminate ...
Dissertation for Master's Degree in Mechanical Engineering, Manufacturing and Production, Abstract: The process of laser forming, especially in recent years, has been widely noticed. In this process, shaping is done by irradiating the laser beam on the surface of the sheet, which is accompanied by a rapid local heating and subsequent cooling of the heated area. However, the way ...
Master's thesis in the field of civil engineering, soil and foundation, today, due to the progress of the tunneling industry, the need to analyze and design underground structures in rocky environments is felt more than in the past. Although there are many numerical and practical software available in this field, none of them are complete and perfect in all fields, and each of ...
Dissertation for the degree of Professional Doctor of Veterinary Medicine (D.V.M) Abstract: The structure of the eye can be examined well with ultrasound due to the presence of large amounts of liquid in the anterior chamber and vitreous, and in many cases it is very difficult to directly examine the eye with an ophthalmoscope, especially when the anterior structures such as the ...
Dissertation for Master's degree in Geography and Urban Planning (M.A.) Abstract: The physical and spatial form of Kiashahr is related to specific and distinct periods. The initial core of the city was formed in the eastern part of the city and below the center of the current city, after that two other parts (Bala Mahaleh and Middle Mahaleh) which are located in the two parts ...
Thesis for obtaining a master's degree in the field: computer, software, abstract. In a sensor network, which is a pervasive distributed system, communication synchronization is one of the discussed cases. One of the main tasks of synchronizing processes is mutual exclusivity. The new algorithms provided are more fair compared to the old algorithms. In this thesis, we present a ...
Master's Thesis in Electrical Engineering (Communication System) Abstract: Optimizing Node Placement in Different Environments for Broadband Sensor Networks Locator Systems are systems that can detect the location of an object in a space. Such systems usually detect the distance between two objects by using radio communication and determine the location of the object in the area ...
Master's thesis in the field of computer software, the use of context, as dynamic information that describes the status of users and items, and affects the decision-making process and selection of users, is necessary in order to improve the quality of the offer by the recommender systems in mobile commerce. In this research, a new multidimensional method for context-aware ...
Abstract For more than two decades, documentary animation has emerged as an independent film style in the world. However, most of the studies and reviews have been conducted in line with the general knowledge and general structure of this style. Therefore, the need to investigate and investigate this method of filmmaking from different perspectives is very noticeable. As a ...
Master's Thesis in Civil-Structural Engineering Abstract In order to estimate the capacity of buildings, it will be much easier and less expensive to use static methods instead of incremental dynamic methods. Although the incremental dynamic method gives more accurate and closer answers to the real behavior of the structure, its high cost and time has increased the desire to use ...
Master's Thesis in Electrical Engineering (Communication-System) Abstract Tracking multiple moving objects in moving camera images Target tracking is one of the most important issues in machine vision. The problem of tracking multiple targets in the images obtained from the moving camera is evaluated in this thesis. To solve this problem, two general methods are presented in ...
Doctoral Dissertation in the field of Civil Engineering - Water and Environment Abstract Network methods are among the most widely used groundwater modeling tools that have been widely spread and accepted in the last two decades. On the other hand, the advancement of computing power of computers and the ease of access to them have led to the rapid development of numerical ...
Master's thesis in the field of chemistry, analysis, abstract. In this research, the synthesis of polymer nanoparticles of ion template using sedimentation method and for the separation and preconcentration of nickel ions from aqueous samples is reported. Nickel template polymer nanoparticles by dissolving stoichiometric amount of nickel nitrate and ligand ...
Dissertation for Master's Degree in Physical Education and Sports Sciences - Sports Physiology Abstract: Background and Objective: During metabolic changes during pregnancy, the mother's contact with heavy metals is considered very important for placental function and fetal health. But it has been assumed that endurance training by affecting the activity of metalloproteins such ...
Medical Biotechnology Master's Thesis Background Abstract: Fibroblast growth factors (FGF) and their receptors (FGFR) play an essential role in the cell. Dysregulation of FGF/FGFR signaling pathways is associated with many abnormalities and cancer development. From this group, type 2 fibroblast growth factor receptor plays an essential role in cell signaling and regulation of ...
The master's thesis of precision instruments and automation in the oil industry. The introduction of the entire research is one of the important scientific, technical and economic topics, the issue of corrosion of metals and the protection of metal facilities. Investigating the topic of corrosion is not so simple and with all the research done, its factors are still not known ...
Dissertation to obtain a doctorate degree in general dentistry. Findings: The vertical changes of the soft tissue in all the measured points were lower in the test group compared to the control group, and this difference was not significant only in the midbuccal region, but it is significant in other places. The horizontal dimensional changes of the soft tissue were also less at ...
Petroleum Engineering Master's Thesis Abstract Phosphoric acid is the second most consumed mineral acid in the world and is used as a raw material in the production of detergents, food and pharmaceutical products. In this sense, the purification of phosphoric acid is one of the essential needs of consuming industries. 95% of acid consumed in industries that need pure phosphoric ...
Master's Thesis of Polymer Industry Engineering Abstract With the progress of human civilization, technology development and the ever-increasing population, the world is currently facing a problem called pollution that threatens the lives of the inhabitants of the earth. Pollution caused by the accumulation of persistent toxic compounds in soil and water, such as chemicals, ...
Master's Thesis in Electrical Engineering (Communication System) Abstract: Optimizing the placement of nodes in different environments for ultra-broadband sensor networks. Locator systems are systems that can detect the location of an object in a space. Such systems usually detect the distance between two objects by using radio communication and determine the location of the ...
Abstract: After wheat, rice is one of the most important grains consumed by the people of the world, which is widely present in people's diet. Half of the world's population depends on rice as a staple food. There are many items of rice in the world and now rice is one of the strategic products of the country. Contamination of rice with heavy metals may be a serious threat to ...