Download more than 100 examples of thesis, proposal and project topics about two chamber microbiological fuel cell in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Dissertation for M.Sc. Chemical Engineering-Environmental Engineering Abstract: Microbiological fuel cells (MFC) are considered as one of the important potentials in providing clean and renewable energy in the future. In addition to providing electrical energy, which is the most widely used and flexible among other types of energy, MFCs not only do not cause the slightest ...
Dissertation for Master's Degree in Chemical Engineering Abstract: Microbial fuel cell biotechnology is a new science, in which microorganisms, as cheap catalysts, convert the chemical energy contained in organic and inorganic compounds into electrical energy. Optimizing parameters affecting battery performance is one of the first laboratory steps towards the development of this ...
Master's thesis in the field of chemical nanoengineering Abstract: Fabrication of ceramic nanofiltration membrane for chloride ion separation (case study: gas condensate) In this research, chloride ion separation using alumina-titania double layer nanofiltration membrane has been investigated. For this purpose, first, the alumina-titania double-layer membrane is made based on ...
Abstract Photovoltaic or PV for short is one of the types of electricity generation systems from solar energy. In this method, by using solar cells, direct production of electricity from sunlight becomes possible. Solar cells are semi-conductors that are made of silicon, the second most abundant element in the earth's crust. When sunlight shines on a photovoltaic cell, a ...
Introduction Since ancient times, energy supply has been a very important issue for human societies. In today's era, due to the industrial and technological advances that have a very important place in the daily life of people, the importance of the problem is manifested in a more obvious way. But the common sources of energy production, which are mostly non-renewable, will be ...
Master's Thesis on Energy Conversion Abstract: Increasing heat transfer as well as increasing the efficiency of energy storage systems due to the limitation of natural resources and with the aim of reducing costs has always been one of the most basic concerns of engineers and researchers. This is especially important in fluids due to the small thermal conductivity coefficient. ...
Master's thesis in the field of chemistry, chemical physics, abstract In this project, platinum/carbon nanocatalyst was first synthesized by chemical reduction of platinum salt with sodium borohydride chemical reducer. The structural and morphological characteristics of the synthesized nanocatalyst were investigated using energy dispersive spectroscopy and scanning electron ...
Dissertation for Master's Degree in Power Electrical Engineering Abstract In this thesis, a hybrid power generation system using fuel cell/battery/supercapacitor to power a light electric vehicle with independent excitation electric motor drive system was studied and simulated. The electric vehicle system consists of a feed and control system, multiple sources, power control ...
Master's Thesis in the field of power, power electronics, power electronics, abstract. Distributed generation power plants have a production capacity of several kilowatts to 10 megawatts, which are used to produce electric energy in places close to consumers. Among their types, we can mention solar cells, fuel cells, micro turbines, wind power plants, etc. If these power plants ...
Master's Thesis of Chemical Engineering-Biotechnology Abstract The deteriorating energy sources of fossil fuels will make the developing human society suffer from fuel shortage in the not too distant future. As a result, the concerns of the continuous and increasing release of carbon dioxide into the atmosphere, as well as the extent of pollution caused by fossil fuels that have ...
Master's Thesis of Energy Conversion Mechanical Engineering Abstract In recent years, due to the importance of finding energy, global warming and environmental pollution and its production sources, and the growing need of various industries for various forms of energy, as well as the large volume of its consumers around the world, the need to provide models to optimize energy ...
To obtain a master's degree in mechanical engineering - manufacturing and production Abstract Fuel cells are electrochemical devices that are used to directly convert fuel into electrical energy. One of the most important types of fuel cells is the polymer fuel cell, which is widely used. In general, two types of optimization can be done in the polymer fuel cell: optimization in ...
Master's Thesis in Accounting Abstract: The strength and credibility of financial and credit institutions is the money that depositors have deposited in them, and the progress and survival of each of the mentioned institutions depends on the share of the total market resources, and increasing the share of the market resources requires continuous effort and a strong, ...
Dissertation for master's degree in the field of electrical engineering, power orientation. Abstract In this thesis, a new method for the optimal location of power plants has been discussed in order to simultaneously optimize the development of production and network. In the considered optimization problem, the goal is to choose the type and capacity of new power plants and the ...
Dissertation for master's degree in the field: Power Electrical Engineering Abstract Due to the extent and complexity of distribution networks, the probability of an accident occurring in them is very high, and the occurrence of an accident can affect many subscribers. Therefore, reliability is one of the key parameters determining the success rate of the system in providing ...
Master's Thesis of Power Electricity Abstract: Photovoltaic energy is one of the clean and efficient energies that is expanding rapidly. With the increase in the penetration percentage of these power plants in the power grid, problems arise that may lead to errors and problems in the distribution system. One of the problems that may occur is the issue of voltage increase at the ...
Master's Thesis of Chemical Engineering-Biotechnology Abstract Lipase is a carboxylic ester hydrolase enzyme that acts on triacylglycerol to release fatty acids, glycerides and glycerol. The discovery of the ability of lipase to catalyze the esterification reaction started a broad chapter in the field of this enzyme's functions. In this study, with the knowledge of the ability ...
Dissertation for Master's Degree (M.Sc.) Orientation: Power Abstract In recent years, with the advances made in data processing and transmission technology, distribution companies are more and more interested in using distribution automation systems. One of the most effective users of automation is the renewal of the distribution network, which is often analyzed as an ...
Dissertation for Master's Degree (M.A.) Major: General Introduction Diabetes is not only a common disease but also a major health problem that has spread widely in the contemporary world. Diabetes or sugar disease is a metabolic (fuel) disorder in the body. In this disease, the ability to produce insulin in the body is lost, or the body becomes resistant to insulin, and ...
Dissertation for master's degree in electrical engineering, power orientation. Abstract The limitation of fossil fuel resources and the possibility of running out of fossil energy reserves, global warming, environmental pollution, price instability, as well as the increasing need of industrial and urban centers for energy, have made the international community think of suitable ...
Dissertation for Master's degree (M.Sc) in the field of electrical-power engineering. Abstract In this thesis, the design of a resistant controller in power electronic circuit breakers and its comparison with linear control methods have been examined. The main goal of research and development in this field is always to find the most suitable control method in order to implement ...
To receive a master's degree in textile technology engineering. Abstract In the previous research, multi-sized nano-roughness was developed using nanoparticles with different sizes and different surface charges along with silicone resin coating to produce multi-purpose textiles with stable properties. In this research, the idea of ??using laser irradiation and finishing textiles ...
The master's thesis in the field of power. Abstract Control of scattered productions and their planning is one of the important issues of power systems operation. The purpose of this issue is to minimize the cost of operation and pollution and to supply cargo by observing the operation restrictions. The increase in the desire to use renewable resources and the move towards the ...
Abstract The main task of the synchronous generator excitation system is to provide the necessary voltage for the generator excitation winding. The excitation voltage is a dc voltage and it is used to create a flux in the excitation winding of the generator and consequently to produce a magnetic field to produce electrical energy by a synchronous generator. In the provided ...
Master's thesis in the field of computer engineering (artificial intelligence) abstract of various image processing techniques are widely used in the field of dentistry. Among these applications, we can mention the identification based on dental images, the detection of dental caries, as well as the identification and examination of dental lesions, which mainly occur around the ...
Dissertation to receive the master's degree in civil engineering ""M. Sc"" Major: Water. Abstract The aim of this thesis is to investigate the trend of annual rainfall changes in 37 selected stations in the whole of Iran using non-parametric method. The two Mann-Kendall tests and the age estimator, which are among the most common non-parametric methods, were used for the trend ...
Abstract The reduction of fossil fuel resources, adverse environmental effects and low efficiency of traditional power grids have increased the desire to produce electricity near the load and the level of the distribution network using renewable sources. One of the basic solutions to solve the problems raised is the use of microgrids. A set of small sources of energy production ...
Introduction In today's world, most countries show great interest in the development of cooperative companies. But it is obvious that the creation and expansion of cooperative companies will be effective and useful when suitable conditions for their survival and dynamic life are foreseen and prepared. However, with the emphasis that the economic theorists at the beginning of the ...
Master's thesis in the field of chemical engineering, abstract of simulation and optimization of biological reactor producing butanol, semi-continuous fermentation is an efficient and beneficial method to produce valuable metabolic products such as biofuels. Mathematical modeling of semi-continuous bioreactors is a very difficult and complex issue due to the transitory and ...
Master's Thesis Electricity- Pollution power of big cities has become an acute issue for years. Expert research shows that the main cause of pollution in cities are cars with internal combustion engines. Combustion vehicles have many disadvantages, among which we can mention things such as dependence on a specific type of energy (oil), production of greenhouse gases, production ...
Master's Dissertation in Electrical Engineering (M.Sc.) Focus: Power Abstract Reliability in any system is a concept that refers to the safe and reliable operation of the system. Although this concept is undefined in most systems such as electrical, mechanical, pneumatic, etc., it is of interest to designers and consumers, but with the advancement of technology and the increase ...
Dissertation of the Ph.D course in Chemical Engineering, Biotechnology, Abstract: Clostridium Langali is a highly anaerobic estogenic bacterium that can grow on synthesis gas components, i.e. CO and H2/CO2, and convert them into ethanol and acetate at ambient temperature and pressure. During this process, the bacterium shows a complex metabolic pathway that includes both ...
Master's degree thesis in the field: Chemical Engineering Abstract In this project, an attempt was made to take a small step towards the synthesis of silicoaluminophosphate molecular sieve in nano dimensions and its use in fuel cells with methanol fuel. Therefore, in this way, nano silicoaluminophosphate was produced under optimal hydrothermal conditions. Next, XRD, FT-IR, SEM ...
Master's thesis in the field of electrical engineering (power trend) Abstract of the investigation of transient electromagnetic states in wind turbines with the increasing development of wind turbines, increasing its efficiency has become more critical. One of the factors for measuring wind turbine efficiency is its performance in transient state problems. The phenomena that ...
Abstract: Introduction: Diabetes or sugar disease is a metabolic disorder (fuel production) in the body. In this disease, the ability to produce insulin in the body is lost, or the body becomes resistant to insulin, and therefore the produced insulin cannot perform its normal function. There are two main types of diabetes. In type 1 diabetes, the destruction of beta cells in the ...
Thesis for master's degree in the field: chemical engineering Abstract Hard polyurethane[1] is always considered one of the most effective and practical polymers in various industries, especially the coating industry. Excellent adhesive property, curing ability at ambient temperature and corrosion resistance of this polymer are some of its remarkable features. This study was ...
Master's Thesis Field: Electricity Major: Electronics Chapter 1 Basics and Generalities Introduction Today, biosensors are used in various fields such as medicine, chemical industry, food industry, environment and the production of medical-health products [1]. In clinical and medical environments, it is very necessary to have tools to diagnose diseases. The development of ...
Master's thesis in the field of polymerization engineering, abstract was determined by using experimental design methods to determine the optimal feed recipe for the preparation of nitrile rubber. Initially, to determine the factors affecting the rate of polymerization, screening tests were designed according to the Plate-Boorman method, which examines a large number of factors ...
Dissertation for Master's Degree in Advanced Chemical Engineering Abstract A new method based on point cloud extraction to extract uranium from water samples and its measurement using alpha spectrometry based on liquid scintillation has been investigated. Uranium extraction from water samples in the presence of a number of available surfactants and chelating reagents has been ...
Dissertation for receiving the master's degree ""M.Sc."" Chemical engineering trend, thermodynamic and synthetic engineering Abstract In this study, the modeling of dilute acid hydrolysis of walnut green skin as a sample of lignocellulosic material to produce fermentable sugar in the bioethanol process has been studied. The four parameters of temperature, time, acid ...
Master's Thesis of Polymer Industrial Engineering Abstract Cross-linked polyethylene is one of the materials that is widely used in the field of insulation production in cables due to having suitable electrical properties and good electrical strength. Nowadays, one of the methods of optimizing the properties and changing the behavior of polymers is the use of filler particles ...
Master's Thesis of Electrical Engineering - Power Abstract Microgrids are networks with small scales at the low voltage level, which are used to supply thermal and electrical loads to small places and places that do not have access to the main power grid. Microgrids are used to supply energy to all types of consumers such as household, industrial and agricultural, and their cost ...
Dissertation for Master's Degree in Agricultural Biotechnology Keywords: two-dimensional electrophoresis, sodium chloride stress, wheat Abstract: Wheat (Triticum aestivum L.) is one of the oldest and first crops that has played an essential role in human nutrition as a raw material for making bread. Considering the population growth and the increasing need for agricultural ...
Dissertation for Master's Degree Abstract Today, preventing losses caused by blackouts and undistributed energy is very important. Therefore, one of the most important issues in the operation of the distribution network is the renewal of the load, which has a great impact on the constant service to the subscribers. When a part of the network is cut off due to an error or ...
Electrical Engineering Master's Thesis - Power Abstract Wind is a suitable and powerful source of energy. Power generation in a variable speed wind turbine is an interesting topic. Because in wind energy converter systems, maximum utilization can be achieved at any speed. But this system needs its parameters to calculate the optimal speed of the turbine. In this thesis, a ...
Dissertation for Master's Degree in Power System Abstract: The trend of reducing fossil fuel resources, adverse environmental effects and low efficiency of traditional power grids has increased the tendency to produce electricity near the load and the level of the distribution network using renewable sources. One of the basic solutions to solve the problems raised is the use of ...
Dissertation for Master's Degree in Natural Resources Engineering - Forestry Abstract: Thinning breeding operations play an important role in the breeding of forest stands and provide various products to the market. In the first thinning, the ratio of cost to income is high, which needs to be studied to determine its profitability. In this research, the amount of production and ...
The thesis for obtaining a master's degree in the field of mechanics, investigating and analyzing the free and forced vibrations of a multi-walled carbon nanotube placed in an elastic medium in order to achieve a clear mathematical understanding of the behavior of different walls of the nanotube under the influence of van der Waals forces and the elastic medium is one of the ...
Master's thesis in the field of agricultural engineering - food science and food industry - food chemistry. Abstract of the research: In this research, strong electric fields with short square pulses and a time scale between microseconds and milliseconds were used to sanitize liquid foods, and food products were processed under environmental conditions or low temperatures and ...
Dissertation for Master's Degree in Food Science and Engineering. Abstract Every year, millions of tons of plastic waste, including bags, plastic envelopes, and packaging materials, enter the environment and cause problems to the environmental cycle due to their irreversibility, and as a result, the need for degradable plastics in nature is increasing day by day. Today, the ...
Master's Thesis Field: Electricity Major: Electronics Chapter 1 Basics and Generalities 1-1 Introduction Today, biosensors are used in various fields such as medicine, chemical industry, food industry, environment and the production of pharmaceutical-health products[1]. In clinical and medical environments, it is very necessary to have tools to diagnose diseases. The development ...
Master Thesis (M.Ss) Abstract The desire to use distributed generation (DG) resources is increasing day by day due to their numerous advantages. The disproportion between the consumption load and the production power will cause the power systems to be operated close to the corresponding nominal capacity, which will seriously aggravate this issue by using FACTS control tools with ...
Doctoral Dissertation on Energy Conversion Abstract One of the most important issues in internal combustion engines is heat transfer in them; Because almost a third of the energy produced inside the combustion chamber is removed through engine cooling. The heat transfer of internal combustion engines is important from various aspects, including the protection of materials used ...
Abstract: Considering the reduction of underground water resources and fossil fuels in today's world and also in Iran, prevention of energy waste and introduction of new methods in the preparation of potable fresh water from sea water will have a special place in the future world. Using methods such as evaporation-distillation methods can be one of these methods. Due to the high ...
Dissertation for Master's Degree in Environment Abstract Air is considered the most vital element of the environment and its pollution endangers human health. Air pollution is one of the most important environmental issues, which itself can be the cause of many other environmental risks. There are many factors that cause air pollution, and one of the most important of them is ...
Dissertation for M.Sc degree, specialization: manufacturing and production, abstract in this thesis, how to improve the properties of plastics with the help of heat treatment. First, we will talk briefly about polymers, plastics and their sub-branches and heat treatment on them, and then we will discuss the effect of annealing heat treatment on heavy polyethylene sheets that are ...
Master's Thesis in Computer-Software (M.Sc) Abstract The quality of service in wireless sensor networks is very different compared to traditional networks. Some of the parameters that are used in evaluating the quality of service in these networks are: network coverage, optimal number of active nodes in the network, network lifetime and energy consumption. In this thesis, three ...
Dissertation to receive a master's degree in the field of chemical engineering, thermokinetic orientation. Abstract With the increase in the use of fuel cells in the industry and as an on-site application, there is a need to develop production units on the site of hydrogen. In this research, a monolithic catalytic reformer in which autothermal reforming of methane takes place is ...
Master's Thesis in Educational Management (M.A.) Academic Year 2012-1393 Abstract The subject of the current research is to examine the relationship between the organizational excellence model (EFQM) and the performance of education
Dissertation for receiving master's degree (M.A) in regional planning orientation, winter 2013 Abstract: Today, many researchers pay attention to the role of tourism in economic and social development
Dissertation for Master's Degree in Industrial Engineering, Mehr 2011, Identifying the value[1] of customers, one of the main components of success in the store. There are different types that are more attention today than before
Dissertation for Master's Degree in Public Administration, Financial Orientation Abstract: In recent years, the private sector has gradually tended to use temporary labor contracts in order to escape from the restrictions of the labor law. Under these contracts, workers are hired with contracts of less than 90 days and under the minimums set by the Supreme Labor Council. In this ...
Dissertation in Master's Degree in Advertising and Cultural Communication Abstract With the introduction and expansion of mobile social networks, the field of communication of more people in different parts of the world has been created, since accurate information about the use of these networks by users is not known. This research was conducted with the aim of the effect of the ...
Dissertation for Master's degree in Geography and Urban Planning (M.A.) Abstract: The physical and spatial form of Kiashahr is related to specific and distinct periods. The initial core of the city was formed in the eastern part of the city and below the center of the current city, after that two other parts (Bala Mahaleh and Middle Mahaleh) which are located in the two parts ...
Dissertation for M.A. degree. Abstract Considering the importance of customer satisfaction in the use of new technologies in the distribution of goods and services, as well as the widespread use of smart fuel cards, which are being implemented as one of the new methods of providing services; Therefore, investigating the impact of providing services in the form of new methods on ...
Dissertation for Master's degree (M.A.) specialization: urban planning. Today, evaluating the quality of the company's services and its relationship with customer satisfaction plays a significant role in the company's performance and strategic goals. In the case of proper service, it leads to common satisfaction and ultimately leads to an increase in the company's performance in ...
Dissertation for Master's degree (M.Sc) Abstract: A sensor network consists of a large number of sensor nodes that are widely distributed in an environment and collect information from the environment. Since the nodes are powered by batteries, an important issue that is considered in sensor networks is the issue of energy consumption. One of the methods that are very common in ...
Master's thesis in telecommunications-systems, the abstract of the current research is about the issue of scalability in wireless sensor networks with imaging capability, which has analyzed, mathematically modeled and simulated the scalability by considering a relatively practical scenario of the sensor network, and based on the performance criteria of outage capacity and ...
Thesis for obtaining a master's degree in the field: computer, software, abstract. In a sensor network, which is a pervasive distributed system, communication synchronization is one of the discussed cases. One of the main tasks of synchronizing processes is mutual exclusivity. The new algorithms provided are more fair compared to the old algorithms. In this thesis, we present a ...
Master's Thesis in Computer Engineering-Artificial Intelligence Abstract Identifying Overlapping Organizations in Dynamic Networks Many complex natural and social structures can be considered as networks [1]. Roads, Internet sites, social networks, organizational communication, kinship relationships, electronic mail exchange, telephone calls and financial transactions are just a ...
Dissertation for Master's Degree (M.A.) Major: ""Production and Operations Management"" Thesis abstract (including summary, objectives, implementation methods and results): With the increase in competition in the global trade arena, the way to supply and select suppliers of machinery and spare parts in the supply chain is considered an important challenge for most organizations. ...
Master's Thesis in the field of Computer Engineering-Artificial Intelligence Abstract Inferring gene regulatory networks from Microarray time series data by dynamic Bayesian networks Genetic regulatory networks are a set of gene-gene relationships that create a cause and effect relationship in gene activities. Our knowledge about these networks plays a very effective role in ...