Download more than 61 examples of thesis, proposal and project topics about turbomolecular pump in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Master's Thesis Applied Design Abstract In this thesis, in the field of vacuum technology, the importance, application and role of this technology in the industry and the advancement of scientific research, technical terms related to this technology, types of vacuum pumps, applications, advantages and disadvantages of each of the vacuum pumps, the importance of studying the ...
Dissertation to receive a master's degree, specialization: civil engineering-water engineering Abstract: In this research, the effect of land slope, difference in height of pressure booster stations, height above sea level on the characteristics of the length of the water transmission systems in order to verify the feasibility and facilitate the prediction of its use and optimal ...
Master's Thesis (Civil Engineering - Water and Wastewater Engineering) Abstract: In this study, ram impact pump modeling was done by the software that was prepared. This software finds the outputs of the HAMMER software as input and by obtaining other information (including the pumping height, etc.) it calculates the amount of pumped water every time the valve is suddenly turned ...
Master's thesis in the field of instrumentation and automation engineering in the oil industry, abstract modeling and non-invasive control of implantable blood pumps in the body for heart failure patients. Left ventricular assist devices (LVAD) are mechanical pumps that are surgically placed in the body of patients who are in the dangerous and final stages of congestive heart ...
Dissertation for Master's Degree in Electrical Engineering, Power Systems, Abstract: In this thesis project, a new analytical approach is proposed for planning electric energy production and determining the amount and location of storage of rotating storage corresponding to the risk level of subscriber load points through profit/cost analysis in the optimization program for the ...
Summer 1390 Expertise Master of the field: Civil Engineering Orientation: Structure Abstract: In this thesis, the effect of nanosilica on the mechanical properties and durability of concrete containing polypropylene fibers
Dissertation for master's degree in the Department of Geography and Urban Planning Abstract One of the phenomena that today's cities, especially large cities, are facing is the phenomenon of high-rise construction. The rapid and uncontrolled growth of the population in cities and the consequent need for housing on a large scale, on the one hand, and preventing the horizontal ...
To receive a master's degree in polymer engineering - polymer industries, May 2013 abstract With the progress of various sciences and knowledge, the boundaries of knowledge have converged and in some fields we are witnessing
Dissertation for obtaining a master's degree in the field: Natural Geography Major: Climatology Abstract Floods are one of the natural phenomena that mankind has been witnessing since a long time ago. In Iran, due to the large area, multiple climates, and temporal and spatial density of rainfall in most watersheds, every year we see huge floods in most regions of the country. ...
Dissertation for Master's Degree in Electrical Engineering, Power Systems, Abstract: In this thesis project, a new analytical approach is proposed for planning electric energy production and determining the amount and storage location of rotating storage corresponding to the risk level of subscriber load points through profit/cost analysis in the optimization program of shared ...
Master's Degree in Physical Education (Sports Physiology) Abstract Objective: The aim of the research was to determine the time-dependent effect of short-term intense interval training on the dynamics of oxygen absorption in girls. Methodology: For this purpose, 40 female students of Arak University with an average age of 25 ± 5 years, weight 54.30 ± 10.390 kg and height 162.5 ± ...
Dissertation for Master's Degree in Civil Engineering - Structures Abstract: One of the important problems in seismic design and implementation of buildings is the significant dead weight used in it. Therefore, in the case of using lightweight concrete that has favorable mechanical properties, significant benefits can be obtained, including a reduction in dead load and ...
Dissertation for receiving the master's degree ""M. Sc."" Field: Agricultural Engineering Major: Water Structures Abstract The sediment transfer process is a completely complex, variable and non-linear phenomenon. So that the behavior of the river in the sediment transfer capacity for a certain discharge is different in different times. Therefore, due to the complexity of the ...
Dissertation for Master's Degree in Mechatronics Abstract In this thesis, a phase-locked loop is designed based on micro-electromechanical systems. The loop system has a feedback phase lock that compares the input phase with the output phase. This comparison is done by a phase detector. Phase detector is a circuit whose average output voltage is linearly proportional to the ...
Master's Thesis of Water Engineering - Water Resources Management Abstract The advance of salt water in fresh water aquifers is not limited to the islands and coasts of oceans, seas and salt lakes, but it is possible for salt water aquifers to advance through deserts, swamps and salt water pits in the adjacent fresh water aquifers, making it salty and unusable in critical ...
Education Level: Master's Degree, Field: Civil Engineering, Major: Structures Abstract: In this thesis, the effect of nanosilica on the mechanical properties and durability of concrete containing polypropylene fibers was investigated. Polypropylene fibers with a length of 18 mm and a ratio of length to diameter of 0.9 mµ were used. The effect of fibers and nanosilica in three ...
Master's thesis in the field of electricity-power orientation Abstract Gearboxes are essential and inseparable components of power transmission systems. These machines convert torque into speed and sometimes speed into torque. The use of mechanical gearboxes in these systems has been common since long ago as an interface between the power generation sector and the power ...
Master's thesis in the field of civil engineering, the trend of water engineering, which is used in various stages of the production of each product, is called virtual water[1] stored in the product. Many countries located in arid and semi-arid regions, by importing food, preserve part of the water needed for domestic production of products for use in other purposes. In this ...
Master's thesis in the field of inorganic chemistry Abstract In this thesis, we investigate the anticancer diamine ruthenium complexes by computational chemistry, which examines the following: energy analysis, which examines the absolute energy value, dipole moment, isotropic and anisotropic polarizability of the complex. 2- The analysis of the frontal orbitals, the energy of ...
Doctoral Dissertation in the field of Civil Engineering - Water and Environment Abstract Network methods are among the most widely used groundwater modeling tools that have been widely spread and accepted in the last two decades. On the other hand, the advancement of computing power of computers and the ease of access to them have led to the rapid development of numerical ...
Master's thesis in the field of chemical engineering, abstract of the design of the Driso ring base and the use of hydrocarbon solvent in the dehumidification process in Farashband refinery, water vapor is one of the most important impurities in the flow of natural gas. Usually, the water vapor itself is not a problem, but instead the liquid or solid phase that forms when the ...
Dissertation (dissertation) to receive a degree... in the field of physical education and sports sciences, specialization in sports physiology. Therefore, the aim of this study was to investigate the effect of endurance, strength and parallel exercises on heart rate, systolic blood pressure, diastolic blood pressure, and PR interval in the workers of Pars Khodro Company. In ...
Master's thesis in the field of civil and environmental engineering. Abstract The main problem in using landfill biogas is the presence of pollutants such as hydrogen sulfide. Hydrogen sulfide gas is colorless, toxic, flammable, and has an unpleasant odor. It is highly toxic and produces SO2 when biogas is burned. In addition, hydrogen sulfide has a corrosive effect. It costs a ...
In order to obtain a master's degree in chemical engineering, abstract freezing of fans in operational units, including the hydrogen unit of Imam Khomeini Shazand Refinery in the cold seasons of the year is one of the important problems in this refinery. In order to provide a suitable solution to this problem, we must have a suitable estimate of the fan outlet temperature. The ...
Presented to graduate education management as part of the academic activities required to obtain a master's degree in the field of mechatronics. Abstract As you know, air conditioner is a high consumption device and has a Freon refrigeration cycle. What drew the companies to the production of inverters was to solve the shortcoming of air conditioners in high energy consumption. ...
Dissertation for Master's Degree in Chemical Engineering Abstract Paying attention to the issue of safety in industrial and chemical facilities is very important. According to the statistics, the amount of human, economic and environmental damages caused by industrial accidents every year in the world is very high. In addition, some of these damages are basically irreparable. ...
Master's thesis in the field of chemical engineering, abstract of the laboratory study of iron oxide production on a microstructural scale using the precipitation method with supercritical anti-solvent by: One of the problems of cement used in oil wells, which are used to connect wall pipes and well walls, is that these cements do not have the desired resistance against high ...
A master's thesis in the field of chemical engineering, abstract of the laboratory study and modeling of calcium carbonate production from calcium chloride solution by absorbing carbon dioxide from industrial exhaust gases, by the efforts of Amin Alamdari, the effect of carbon dioxide concentration on the precipitation of calcium carbonate species and the kinetics of calcium ...
Dissertation for receiving M.Sc degree) Major: Inorganic Chemistry Dissertation Abstract: We used Density Functional Theory (DFT) method at DFT/6-31G level to investigate the geometric structure, relative energies and electronic properties of possible protropic tautomers in Nexium, Protonix and Lamivudine. The structure and relative energies of tautomers in different solvents ...
Master's course in intensive care nursing Abstract Introduction: In the intensive care unit, ventilator-associated pneumonia ranks first among hospital infections. Since the role of nurses in preventing this complication is very important, the present study was conducted in order to compare the effect of two methods of face-to-face training and clinical guidelines for the ...
Doctoral Dissertation Proposal Abstract Gaseous pollutants, including volatile organic compounds and aromatic substances, are very harmful and dangerous for the environment and human health. There are many methods such as physical methods, chemical methods and biological methods to remove gaseous pollutants. In the meantime, biological methods are more widely used due to their ...
Master's thesis in the field of chemical nanoengineering Abstract: Fabrication of ceramic nanofiltration membrane for chloride ion separation (case study: gas condensate) In this research, chloride ion separation using alumina-titania double layer nanofiltration membrane has been investigated. For this purpose, first, the alumina-titania double-layer membrane is made based on ...
Master's Thesis in Chemical Engineering (Process Simulation and Control) Abstract Modeling and Simulation of the Electrostatic Desalination Process of Crude Oil by Elham Ariafard The aim of this research is to model the desalination process of crude oil based on the population balance method. For this purpose, the one- and two-stage electrostatic desalination process, which ...
Dissertation for Master's Degree in Power Electricity Chapter 1 Overview of Wind Energy and Wind Turbine Preface Energy supply and demand in the world has become one of the most important issues of the day, so that the world will be seriously affected by it until the end of the 20th century and even after that. Fossil energies such as oil, gas and coal are facing a new big ...
Master's thesis in the field of chemical engineering without major. Abstract: Modeling, simulation and optimization of Jam Petrochemical Check Bed Reactor for hydrogenation of 1 and 3-butadiene. Therefore, a suitable kinetic model has been selected as a basic structure for modeling the reactor, and after that the presented model has been developed in order to match the molar ...
Master's Thesis in the field of Chemical Engineering (no orientation) Abstract of the laboratory study of the wear phenomenon of liquid containing sand in pipelines. The studied fluid consists of two phases, liquid and solid. The liquid phase is water, and sand particles form the solid phase. In this research, the parameters affecting the wear rate, including: fluid speed, sand ...
Master of Mechatronics Abstract As you know, the air conditioner is a high consumption device and has a Freon refrigeration cycle. What drew the companies to the production of inverters was to solve the shortcoming of air conditioners in high energy consumption. To improve energy consumption in every part of the industry, one should pay attention to several parameters, it is ...
Master's thesis in the field of electricity-power orientation Abstract Gearboxes are essential and inseparable components of power transmission systems. These machines convert torque into speed and sometimes speed into torque. The use of mechanical gearboxes in these systems has been common since a long time until now as an interface between the power generation sector and the ...
Presented to graduate education management as a part of the educational activities required to obtain a master's degree, the dimensions of MEMS components according to Figure (1-2) include a wide range, from dimensions smaller than one micrometer that are not visible to the eye to dimensions of one millimeter, also types of these systems can be in a simple state, a tool without ...
Dissertation for Master's Degree in Mechanical Engineering (Applied Design) Abstract: Electromechanical micro and nano systems have been noticed due to their distinctive features and unique characteristics, mainly in the two fields of sensors and sensors, in various sciences such as mechanics, aerospace and medicine. Electrostatic stimulation is one of the simplest and most ...
Abstract Photovoltaic or PV for short is one of the types of electricity generation systems from solar energy. In this method, by using solar cells, direct production of electricity from sunlight becomes possible. Solar cells are semi-conductors that are made of silicon, the second most abundant element in the earth's crust. When sunlight shines on a photovoltaic cell, a ...
Abstract Helicobacter pylori is a gram-negative, spiral-shaped, microaerophilic bacterium that lives in the human stomach. This bacterium is often seen in patients who suffer from chronic gastritis or stomach ulcers. Helicobacter pylori infection is asymptomatic in more than 80% of people. It seems that this bacterium plays a role in maintaining the natural ecology of the ...
Dissertation for Master's Degree in Medical Engineering Abstract Cardiac arrhythmias are one of the heart diseases that should be taken care of in patients admitted to the intensive care unit. Smartening the process of accurate diagnosis of heart diseases is a problem that has attracted the attention of researchers for years. In this research, an efficient method for selecting ...
Mechanical Engineering Master's Thesis - Applied Design Abstract Today, in various industries such as aerospace, atomic energy, chemical industries, refineries, petrochemical industries, etc., there is a need to use high-pressure mechanisms to enable the completion of relevant processes. The increase in pressure is done inside the cylindrical chambers and as a result, such an ...
Master's thesis in the field of agricultural engineering - food science and food industry - food chemistry. Abstract of the research: In this research, strong electric fields with short square pulses and a time scale between microseconds and milliseconds were used to sanitize liquid foods, and food products were processed under environmental conditions or low temperatures and ...
Dissertation for receiving a master's degree in the field of electricity - the tendency of electric machines. Abstract In this thesis, the behavior of the wind power plant is investigated using the detailed model of induction generator with two-way feeding. Electronic converters of the power plant and its control systems and the behavior of the power plant include electrical and ...
Abstract Background and Purpose: Emulsions are an important part of most food, pharmaceutical and cosmetic systems, which are very important in various industries due to their special rheological and physicochemical properties. But the main limitation of these systems is their thermodynamic instability, which causes phase separation over time. In this research, the effect of ...
The thesis submitted to graduate education management as part of the educational activities required to obtain a master's degree in the field of mechatronics. Abstract In this thesis, a phase-locked loop is designed based on micro-electromechanical systems. The loop system has a feedback phase lock that compares the input phase with the output phase. This comparison is done by a ...
Master's Thesis in Mechanical Engineering, Applied Design 1-1-Introduction All humans know that the heart is a vital organ in the human body, so we cannot live without it. But with a purely mechanical view, the heart is just a pump; A very complex and important pump; And in terms of being a pump, like all pumps, there is a possibility of clogging, failure or needing to be ...
Master's Thesis of Energy Conversion Mechanical Engineering Abstract In recent years, due to the importance of finding energy, global warming and environmental pollution and its production sources, and the growing need of various industries for various forms of energy, as well as the large volume of its consumers around the world, the need to provide models to optimize energy ...
Dissertation for M.Sc Master's Degree, Mechanical Engineering - Applied Design Abstract Modern wind turbines today tend to vibrate a lot due to their elastic, long and narrow structure. Therefore, all components of wind turbines should be subjected to vibration and modal analysis in the design stages, and their natural frequencies should be reviewed with turbine excitation ...
Abstract Introduction: Intravenous feeding is considered a preferred and safe method for patients hospitalized in special wards, which despite its many advantages, has complications such as respiratory aspiration. Aspiration pneumonia is responsible for causing 15-20% of hospital infections and 39% increase in costs, and it is also considered one of the ten causes of death in ...
Mechanical Engineering (Tendency to Energy Conversion) Abstract: Investigating the disadvantages of urban water supply networks (as an example of the Langrod water network) and optimizing and designing the optimal network for a specific region using the HBMO honey bee matching algorithm. Due to the global water crisis, today a special approach to the design and optimal use of ...
Dissertation for Master's degree (M.Sc) orientation: energy conversion. Abstract In this research, a study on irreversible absorption refrigeration systems based on internal and external irreversibility is presented with regard to the limited thermal capacities of external tanks. To optimize the system, three scenarios were defined, in which objective functions such as ...
To get a master's degree in mechanical engineering Abstract: Today, the use of aluminum and magnesium alloys in the automotive and aerospace industries is increasing due to the high strength of these alloys and their light weight. Since the forming ability of these alloys is low at ambient temperature, forming these alloys at high temperatures improves their formability. ...
Master's Thesis in Energy Systems Abstract In recent years, the possibility of using solar energy for cooling and dehumidification has occupied the human mind. Solar absorption cooling systems (Solar Absorption Cycles) have advantages such as not being environmentally dangerous and low energy consumption, especially during electrical peak hours. In addition, since the cost of ...
Master's Thesis in Energy Systems Abstract Crude oil distillation unit is one of the most important and critical operational units of any refinery. This unit often requires revision in the design of the structure (Revamping) or making small changes in its existing condition without the need to reduce or increase the basic process devices (Retrofitting) in order to achieve higher ...
Master's Thesis, Mechanical Engineering, Energy Conversion, Abstract In this thesis, using the CFD computational fluid dynamics technique, the effect of key parameters such as the effect of secondary inlet pressure on the ejector device, suction ratio, return currents caused by secondary inlet pressure and the effect of all these parameters on the hydrodynamic characteristics of ...
Persian summary Ansal onion, with the scientific name Drimia maritia, is one of the important medicinal plants that has been used in traditional medicine to treat various diseases such as swelling, respiratory disorders, jaundice and epilepsy. Bufadinolides have been identified as the main compounds of this plant. The bufadinolide compound of this plant is Proscillaridin, which ...
Master's Thesis in Mechanical Engineering (Energy Conversion) Abstract Numerical investigation of the effect of microstructures on heat transfer and fluid mixing in microchannels, the need for high heat transfer from electronic packages and optical systems, etc., has created a challenge in the field of thermal management. In this context, microchannel heat wells play a great ...