Download more than 30 examples of thesis, proposal and project topics about transformer in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Master's Thesis of Power Electrical Engineering Abstract The wide network of the power system has very expensive equipment, including generators, breakers, power cables and transformers. The power transformer is the beating heart of this network, which is always subject to various errors under the influence of operational and environmental conditions, and in some cases, it will ...
Master's thesis in the field: Electrical Engineering - Power Abstract Transformer is one of the most important components of the power system, and due to the high cost and importance of the transformer's performance in the power system and the time-consuming nature of its replacement, the process of examining and choosing the optimal and optimal operation method for ...
Master's Thesis in Electrical Engineering ""M.SC."" Direction: Abstract The power of using electric vehicles such as hybrid electric vehicles in the transportation industry is increasing day by day. The battery of these cars can be charged through a home power socket or through public parking lots. Additional load caused by car battery charging can cause harmful consequences on ...
Dissertation for M.sc degree, field: electricity, orientation: power electronics. Abstract Voltage stability is related to the power system's ability to maintain acceptable voltages in all system buses under normal conditions and after disturbance. The system enters an unstable state when a disturbance, an increase in the required load or a change in the system's position causes ...
Master's thesis in electrical engineering, power, power trend, abstract network development planning, operation planning and finding solutions to improve the security and economic performance of the power system all require system studies. The most necessary step in conducting these studies is network modeling, which itself requires detailed information about the impedance ...
Dissertation to receive a master's degree in electrical engineering, power trend. Abstract: Flexible power transmission systems, which are known as FACTS[1] compensators, are modern tools that have been used in power systems to strengthen the controllability and develop the transmission capacity of power networks based on power electronic converters during the last decade. In ...
Dissertation of the master's degree in the field: Electrical Engineering - Power trend. Abstract Today, despite the wide use of sensitive loads such as power electronics, computers and non-linear loads in distribution networks, the issue of power quality has received more attention. Most of these loads are sensitive to voltage changes, such as undervoltage and overvoltage, and ...
Master's thesis in the field of electrical engineering - power abstract of the possible analysis of dynamic stability of microgrids, considering wind turbines, in recent years, the high penetration of renewable energy sources, especially wind energy, in power networks has created new problems. One of the most important issues is the uncertainty in the power produced by wind ...
Master's Dissertation in Power Electricity Abstract: In electrical networks, costs caused by system losses and defects caused by voltage deviations from permissible limits are among the biggest problems that plague power generation, transmission and distribution. Therefore, reducing the costs of planning and operating power systems, and at the same time, observing its limits and ...
Master's Thesis Abstract: Short-term load forecasting, in the form of one-hour to several days load forecasting, has a significant impact on the operation of power systems. Because many energy management measures, such as setting up a cost-effective plan to use existing power plants, planning the purchase of fuel needed by power plants, entering and exiting units, developing ...
Dissertation for M.Sc)) Electrical Orientation - Power Abstract Common-mode voltages and currents are generated due to parasitic capacitance between solar cells and their frame, which is usually grounded. These capacities are usually modeled as capacitors between the negative terminal of the solar cell and ground. In solar cells that are connected to the grid through a ...
Dissertation for Master's Degree (M.S) in Power Electricity, Abstract With the ever-increasing expansion of energy consumption in the world, the development of power networks is essential. But the creation of new transmission lines requires time and high costs, so if it is possible to use the same lines with a higher transmission capacity, it is very cost-effective. Today, the ...
Master's Thesis in Electrical Engineering, Power Orientation Abstract In this thesis, while investigating the phenomenon of saturation in protective CTs, the problems related to the detection of this phenomenon and the compensation of CT secondary current have been discussed, and in order to solve the problems raised, methods have been introduced and the results have been ...
Master's thesis in the field of electrical engineering (power trend) Abstract of the investigation of transient electromagnetic states in wind turbines with the increasing development of wind turbines, increasing its efficiency has become more critical. One of the factors for measuring wind turbine efficiency is its performance in transient state problems. The phenomena that ...
Master's Thesis, Electrical Engineering, Power, Abstract: The sliding mode control method is one of the most important non-linear control methods, whose distinctive characteristics are insensitivity to parameter changes, complete rejection of disturbance, and dealing with uncertainty. This controller first brings the system from the initial state using the law of reaching the ...
Master's Thesis in Electrical Engineering, Power 1-1 Introduction Energy supply sources in the last few decades have been from fossil sources, which until recently have been obtained almost cheaply. Cheap energy sources caused that the optimal use of energy and energy recycling were practically not paid much attention. Due to the energy shortage crisis and the sense of danger ...
Dissertation to receive a master's degree ""M.Sc"" in the field of electrical engineering, power systems trend Abstract Today, significant advances in semiconductor technology and the emergence of high-power switches that have the ability to be turned off by a control signal on the one hand and the better efficiency of multi-level converters compared to two-level converters on ...
Abstract Common-mode voltages and currents are generated due to the creation of parasitic capacitance between solar cells and their frame, which is usually grounded. These capacities are usually modeled as capacitors between the negative terminal of the solar cell and ground. In solar cells that are connected to the grid through a transformer, the electrical insulation of the ...
Master's Thesis of Polymer Industrial Engineering Abstract Cross-linked polyethylene is one of the materials that is widely used in the field of insulation production in cables due to having suitable electrical properties and good electrical strength. Nowadays, one of the methods of optimizing the properties and changing the behavior of polymers is the use of filler particles ...
Dissertation to receive a master's degree in electrical engineering, power orientation. Abstract: Flexible power transmission systems, which are known as FACTS[1] compensating devices, are modern tools that have been used in power systems to strengthen the controllability and develop the transmission capacity of power networks based on power electronic converters during the last ...
Dissertation for master's degree in electricity, power orientation Abstract: In the past, the structure of energy production and consumption systems, such as electricity and natural gas, were independent of each other. But due to the ever-increasing growth of energy consumption and the development of control systems and the need for coordination between energy production and ...
Master's thesis in the field of mechanical engineering, energy conversion trend. Abstract: Considering that heat transfer is widely used in various fields of science, it is necessary to use wide recessed or raised surfaces due to physical and spatial limitations in electrical systems. The main purpose of using these surfaces is to increase heat transfer by increasing the ...
Dissertation for the M.Sc. In the field of electrical engineering, power electronics, abstract: The material that is analyzed in this thesis in order to simulate and implement the buck converter nonlinear controller is presented in four chapters. In general, the buck converter and the relationships governing it and the studies conducted on the buck converter and a control method ...
Master's Thesis in Electrical Engineering, Power Orientation Abstract In this thesis, while investigating the phenomenon of saturation in protection CTs, the problems related to the detection of this phenomenon and the compensation of CT secondary current have been discussed, and in order to solve the problems raised, methods have been introduced and the results have been ...