Download more than 27 examples of thesis, proposal and project topics about torque in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Master's Thesis in Psychology - Assessment and Measurement Abstract The psychometric properties of Harry's stress questionnaire were examined after translation and validity of appearance and content were checked with factor analysis method. A sample of four hundred people from Tehran city were selected by simple random method and available sampling and completed the 66-question ...
Dissertation for Master's Degree in Electrical Engineering (M.Sc) Abstract The power system stabilizer is added to the excitation system in order to improve the damping of the power system during low frequency disturbances. For large-scale power systems that include a large number of connected generators, setting the power system stabilizer parameters will be a complex and ...
Dissertation for Master's Degree in Civil Engineering, Structural Orientation Abstract: Today, due to the increasing space limitations and economic savings, it is inevitable to use diagonal bridges to avoid lengthening the route and increase road safety. The diagonal issue of the bridge will cause a different and sometimes complex behavior in the bridge under the effect of the ...
Dissertation for receiving a master's degree in the field of: Power Electricity, the increase in the presence of non-linear power electronic loads in distribution networks, on the one hand, and the ongoing changes in distribution networks, such as the presence of scattered production sources and the possibility of forming power microgrids [1], have increased the need for new ...
Master's thesis in the field of electricity-power orientation Abstract Gearboxes are essential and inseparable components of power transmission systems. These machines convert torque into speed and sometimes speed into torque. The use of mechanical gearboxes in these systems has been common since long ago as an interface between the power generation sector and the power ...
Dissertation to receive a master's degree ""M.Sc"" in the field of electrical engineering, power, high voltage, abstract. Inverters can produce single-phase and three-phase ac voltages from a constant or variable dc voltage. There are various methods to control the output voltage of the inverter, which is introduced in this thesis from an inverter system with solar panel input. ...
Dissertation for Master's Degree (M.A) Major: Sports Biomechanics Abstract Objective: In recent years, the use of permitted sports supplements has become one of the most important parts of an athlete's preparation to participate in the field of competition. Despite the many researches that have been conducted in the field of supplements, there is no general consensus on ...
Dissertation for Master's Degree in Power Electrical Engineering Abstract In this thesis, a hybrid power generation system using fuel cell/battery/supercapacitor to power a light electric vehicle with independent excitation electric motor drive system was studied and simulated. The electric vehicle system consists of a feed and control system, multiple sources, power control ...
Abstract This thesis deals with uncertainty estimation in robust control of robotic arms and presents new methods based on voltage control strategy for uncertainty estimation. The voltage control method is much simpler compared to the conventional torque control method, because it does not require a complex non-linear model of the robot. As a result, the volume of controller ...
Master's thesis in the field of electrical engineering (power trend) Abstract of the investigation of transient electromagnetic states in wind turbines with the increasing development of wind turbines, increasing its efficiency has become more critical. One of the factors for measuring wind turbine efficiency is its performance in transient state problems. The phenomena that ...
Master's thesis in the field of electricity-power orientation Abstract Gearboxes are essential and inseparable components of power transmission systems. These machines convert torque into speed and sometimes speed into torque. The use of mechanical gearboxes in these systems has been common since a long time until now as an interface between the power generation sector and the ...
Dissertation for receiving a master's degree in the field of: Power Electricity Abstract The increase in the presence of non-linear power electronic loads in distribution networks on the one hand and the ongoing changes in distribution networks such as the presence of scattered production sources and the possibility of forming power micro-grids[1] have increased the need for new ...
Master's Thesis in Mechanical Engineering, Applied Design, Abstract: Microelectromechanical systems are generally classified based on the type of their excitation mechanism. In addition to electrostatic excitation, which is considered as one of the most important excitation mechanisms, thermal excitation is widely used in multi-layered and functionally variable ...
Master's Thesis on Automotive Powertrain Abstract In this thesis, which is presented under the title of turbocharger adaptation suitable for EF7 engine in order to improve volumetric efficiency, firstly, the history of the invention and use of turbocharger is discussed. Then, the naturally aspirated and turbocharged engine are compared, the result of which is to clarify the ...
Dissertation for Master's Degree in Electrical Engineering (M.Sc) Major: Power System Abstract Stabilizer is added to the excitation system in order to improve the damping of the power system during low frequency disturbances. For large-scale power systems that include a large number of connected generators, adjusting the power system stabilizer parameters will be a complex and ...
Dissertation for Master's Degree in Energy Conversion Mechanical Engineering Abstract: Fluid propulsion vector orientation has emerged as an important technology for high performance air vehicles. This technology can improve the maneuverability of the aircraft by changing the nozzle flow and its deviation from its axial direction. The purpose of this study is to investigate the ...
Dissertation for M.Sc Mechanical Engineering - Energy Conversion Trend Abstract In the last century, with the increasing demand for energy and the reduction of fossil fuel resources, the role of renewable energy in the progress and development of countries is not hidden from anyone. In the meantime, wind energy has a special share and has the highest growth rate among other ...
Dissertation for Doctoral Degree Abstract This thesis deals with uncertainty estimation in robust control of robotic arms and presents new methods based on voltage control strategy to estimate uncertainty. The voltage control method is much simpler compared to the conventional torque control method, because it does not require a complex non-linear model of the robot. As a ...
Master's Degree Thesis Abstract With the advancement of technology, the need to use new materials is felt. New methods have been developed to make new materials. Among the new materials in progress, we can mention double-layer sheets. These materials have composite properties of composite materials. The purpose of this research is to produce a double-layer sheet of 304L ...
Doctoral Dissertation on Energy Conversion Abstract One of the most important issues in internal combustion engines is heat transfer in them; Because almost a third of the energy produced inside the combustion chamber is removed through engine cooling. The heat transfer of internal combustion engines is important from various aspects, including the protection of materials used ...
Dissertation for M.Sc. Mechanical engineering trend - applied design In this research, a wind turbine with a vertical axis of the Savonius model is modeled. The wind turbine has been modeled in the fluid control volume, which is the same as the wind tunnel in real conditions, and has been investigated under wind blowing with different speeds. Also, in terms of overlap ratio, it ...
Dissertation for the Master's degree ""M.Sc"" in Mechanical Engineering - Energy Conversion. Abstract In this thesis, experimental analysis along with numerical simulation has been carried out to investigate the performance of Savunius vertical axis wind turbine. In order to carry out the tests, the turbine was tested in the subsonic wind tunnel. In order to check the accuracy ...
Mechanical Engineering, Manufacturing and Production Department, Master's Thesis, Introduction High-speed rolling bearings have many applications in rotating machines, whose task is to separate the rotating parts from the fixed parts of the machine. Accuracy is very important in machine tool applications and bearing corrosion resistance in chemical machines. In aerospace ...
Master's thesis in the field of mechanical engineering in the field of energy conversion. Abstract The increasing use of fossil resources, the increase of greenhouse gases and the strict standards of car pollutants are the main incentive to use biodiesels as an alternative fuel for diesel engines. Air pollution, global warming, limited and expensive fossil resources are among ...
Master's thesis in the field of mechanical engineering (applied design trend) Abstract of the study of the deterioration of non-isotropic TWB sheets under the hydroforming process. During the research, four different metals of aluminum alloys 6111-T4, 5083-H18, 5083-O and dual-phase steel DP590 and two spherical tensile tests and simple uniaxial tensile tests were used. Then we ...