Download more than 100 examples of thesis, proposal and project topics about thermodynamic properties in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Dissertation for Master's Degree in Chemical Engineering Abstract Critical characteristics for materials such as critical temperature, critical volume and critical pressure are important characteristics for predicting many thermodynamic properties of different materials. Knowing the critical properties plays an essential role in all hydrocarbon production and process operations. ...
Master's thesis in the field of chemical engineering Kidney stones are one of the most common diseases in the world, most of its crystals consist of calcium oxalate crystals. Therefore, it has been a long time that the investigation of effective substances in controlling this disease through the control of calcium oxalate crystals has been considered. The purpose of this ...
Master's thesis in chemical engineering field, vapor pressure is an important thermodynamic property in process equipment design and chemical engineering unit operation. Therefore, experimental vapor pressure data that cover the entire range of vapor pressure are very valuable, but due to the lack of accurate measurements for the vapor pressure of some materials near the triple ...
Master's thesis in the field of structural engineering. Abstract: The increase in vulnerability caused by earthquakes and the large number of earthquake casualties caused by structures and houses that are weak in terms of construction forces people to conduct studies to reduce these risks and damages. Studies such as severe earth movement and seismic hazards related to it play ...
Dissertation for receiving a Master's degree (M.Sc.) specialization: Environment Abstract Gaseous liquids obtained from the refining of sour gases are also sour and contain a large percentage of hydrogen sulfide and mercaptans. Therefore, after distilling and preparing the products, it needs refining processes to remove or reduce the amount of sulfur and mercaptans present. ...
Dissertation for receiving the master's degree ""MSc"" specialization: applied chemistry Farsi abstract of the thesis or dissertation (including: summary of objectives, implementation methods and results obtained in maximum 10 lines): The possibility of manipulating matter at the nano level was first proposed in written form by Richard Feynman. During his conference called ...
Abstract Gas hydrates are a group of solid host compounds that play an important role in many processes such as gas storage, transfer and separation, heterogeneous catalysis and water purification. These crystals are formed at a temperature higher than the freezing point of water and high pressure. There are different methods to calculate the free energy difference: 1) ...
Master's Thesis in Chemical Engineering, Thermodynamics and Kinetics Abstract: A major part of the final properties of the product in emulsion polymerization is determined by the particle size distribution. In this project, an accurate model based on population balance equations (zero-one model) which includes the phenomena of nucleation and particle growth has been chosen to ...
Dissertation for receiving M.Sc degree) Major: Inorganic Chemistry Dissertation Abstract: We used Density Functional Theory (DFT) method at DFT/6-31G level to investigate the geometric structure, relative energies and electronic properties of possible protropic tautomers in Nexium, Protonix and Lamivudine. The structure and relative energies of tautomers in different solvents ...
Master's Thesis in Chemical Engineering Abstract Vapor pressure is an important thermodynamic property in process equipment design and chemical engineering unit operation. Therefore, experimental vapor pressure data that cover the entire range of vapor pressure are very valuable, but due to the lack of accurate measurements for the vapor pressure of some materials near the ...
Dissertation for receiving a master's degree in electrical engineering, electronics orientation. Chaos theory was founded at the end of the 20th century by Lorentz. Chaos science investigates non-linear systems and their behavior in different conditions. Since the systems around us are mostly non-linear, by creating feedback in them, they may show chaotic behavior, so chaos ...
Academic thesis for obtaining a master's degree in electrical engineering, electronics orientation Abstract In this thesis, firstly, the introduction of graphene, its manufacturing method, advantages and applications in field effect transistors and the conducted research will be extracted and examined, then we will have an overview of the structure of field effect transistors ...
Thesis for master's degree in the field: chemical engineering Abstract Hard polyurethane[1] is always considered one of the most effective and practical polymers in various industries, especially the coating industry. Excellent adhesive property, curing ability at ambient temperature and corrosion resistance of this polymer are some of its remarkable features. This study was ...
Master's degree thesis in the field of chemical engineering, thermokinetic and catalyst orientation. Abstract The purpose of this research is to estimate the electrical conductivity of natural waters based on modern mathematical methods. To achieve this, the waters of the Karaj and Jajrud rivers are considered as special cases. For this purpose, 20 sampling stations were ...
Master's thesis in the field of chemical nanoengineering, abstract modeling of chloride ion removal from gas condensate using nanofiltration of chloride ion in gas condensate can cause severe corrosion of equipment and pipes. Therefore, it is necessary to remove it from the condensate flow. The aim of this work is the mathematical modeling of the nanofiltration process for the ...
Dissertation for obtaining a master's degree M. Sc)) Department of Chemistry - Green Synthesis of Organic Chemistry 2-phenylimidazoles boiled using ionic liquid. Imidazoles are an important group of heterocyclic compounds that have various biological and medicinal activities such as anti-hypertensive, anti-cancer, anti-HIV, anti-bacterial and pain reliever. In this thesis, new ...
Master of Chemistry (Chemistry-Physics) Abstract In the present work, the theory of stable structures, bond energies and interactions in H2SO4...HNO...(H2O)n clusters (n = 0-2) were studied at the MP2/aug-cc-pVDZ computational level. The presence of one and two H2O molecules strengthens the interaction between HNO and H2SO4 molecules, and this indicates the positive role of H2O ...
Master's Thesis in the field of Chemical Engineering (no orientation) Abstract of the laboratory study of the wear phenomenon of liquid containing sand in pipelines. The studied fluid consists of two phases, liquid and solid. The liquid phase is water, and sand particles form the solid phase. In this research, the parameters affecting the wear rate, including: fluid speed, sand ...
Thesis of the master's degree in the field: chemical engineering, abstract. In designing the network of heat exchangers, the designer usually considers high operational flexibility in the presented plan. However, some of the changes that occur in the operating conditions of the process after the design, determine the need to modify the existing network. The purpose of the ...
Master's thesis in the field of chemical engineering, abstract of the effect of additives on crystal morphology in the crystallization process of calcium oxalate. Kidney stones are one of the most common diseases in the world, and most of its crystals are composed of calcium oxalate crystals. Therefore, it has been a long time that the investigation of effective substances in ...
Dissertation for Master's Degree (M.Sc) Direction: Applied Chemistry Persian Summary According to international standards, the sulfur in the fuels used in the transportation industry, as one of the most important polluting industries, should be reduced to about 10 ppmw, while many refineries in the world produce fuels with a sulfur content of more than 1000 ppmw. One of the new ...
Dissertation for receiving a master's degree in applied chemistry, Persian abstract. In this research, graphite particles were converted to graphene oxide by Hammer's method. Graphene nanoparticles are one of the best and most effective absorbent materials that have been produced so far. Graphene is one of the successful allotropes of carbon in the field of drug absorption and ...
Dissertation for receiving M.Sc degree in mechanical-structural engineering and the production of aluminide permeable coatings for the protection of gas turbines used in power plant, aviation, marine, oil and gas and petrochemical industries, which are mainly attacked by high temperature oxidation and hot corrosion phenomena. In this research, in order to use the effect of ...
Abstract Background and Purpose: Emulsions are an important part of most food, pharmaceutical and cosmetic systems, which are very important in various industries due to their special rheological and physicochemical properties. But the main limitation of these systems is their thermodynamic instability, which causes phase separation over time. In this research, the effect of ...
A master's thesis in the field of mechanics, applied design, abstract. These two characteristics are caused by phase transformations under different thermodynamic loadings. Depending on these two mentioned features, memory alloys can be used as actuators in different forms. These structures can be used in different fields such as medicine, aerospace, knowledge
Summer 1390 Expertise Master of the field: Civil Engineering Orientation: Structure Abstract: In this thesis, the effect of nanosilica on the mechanical properties and durability of concrete containing polypropylene fibers
Master's Thesis of Ardakan Faculty of Art and Architecture, Carpet Department (Primary Materials and Dyeing) Mehr 2013 Abstract: During the period of its use, the hand-woven carpet may be affected by various factors and conditions
Thesis for the M.Sc degree in wood and paper industry engineering, Mehr 2013 Abstract: In this research, the physical and mechanical properties of nanocomposites obtained from cellulose nanofibers and poly polymers
Dissertation to receive the master's degree ""M.S.c"" specialization: Textile chemistry and fiber science Abstract: One of the important processes in the completion of textile goods is the underhand improvement in textiles. Finishing the softener provides a desirable softness to the fabric and improves its properties, and the main goals of the softener are to reduce static ...
Dissertation for Master's Degree in Civil Engineering - Structures Abstract: One of the important problems in seismic design and implementation of buildings is the significant dead weight used in it. Therefore, in the case of using lightweight concrete that has favorable mechanical properties, significant benefits can be obtained, including a reduction in dead load and ...
The effect of fiber and pozzolanic materials on the mechanical properties of glass fiber reinforced concrete Master's Thesis of Civil-Structural Engineering Abstract The failure and destruction of concrete is highly dependent on the formation of cracks and microcracks. With increasing loading, microcracks are connected and form cracks. In order to solve this problem and also to ...
In order to receive a master's degree in textile technology, it is essential to know the physical and mechanical properties of carpets to produce a quality product and maintain the proper appearance. In this research, an attempt has been made to provide a model to determine the relationship between the different parameters of these characteristics, therefore, to measure these ...
Education Level: Master's Degree, Field: Civil Engineering, Major: Structures Abstract: In this thesis, the effect of nanosilica on the mechanical properties and durability of concrete containing polypropylene fibers was investigated. Polypropylene fibers with a length of 18 mm and a ratio of length to diameter of 0.9 mµ were used. The effect of fibers and nanosilica in three ...
Dissertation for Master's Degree (M.Sc) Major: Applied Chemistry Persian Summary The purpose of this research is to investigate common fatty acids in ostrich oil and determine the amount of retinol in snail secretion to make a cream with therapeutic properties. Since 3000 years ago, the healing properties of ostrich oil have been known to treat wounds, burns, joint pain and skin ...
Introduction In today's era, the presence of waste materials resulting from various physical and chemical processes is one of the important problems of industrialized and developing countries. So that extensive research is being carried out for methods of recycling or disposing of them to minimize the damage to the environment. In this regard, construction researchers, like ...
Master's Thesis / Inorganic Chemistry Abstract Considering the application of nonlinear optical properties (NLO) in technologies such as lasers, remote communication, photovoltaic cells, information processing and holography and the mineral diversity of these materials, we started a research in this field and focused on borazine-containing dyes. Our main goal in this research is ...
Thesis for obtaining a master's degree. Abstract: The increase in environmental concerns and the progress of green chemistry processes have necessitated the replacement of homogeneous catalysts with heterogeneous ones. In this research, activated carbon was used as a suitable substrate due to its special properties. The most important of these properties are resistance in acidic ...
Dissertation to receive the Ph.D. degree in Pharmacy. Persian summary. Quick-release oral tablets are solid pharmaceutical forms that have received special attention in the last three decades and are considered as an alternative to regular tablets and capsules. In contact with oral saliva, these tablets quickly disintegrate and turn into soluble fine granules in less than 1 ...
Dissertation for Ph.D. degree in Pharmacy, Persian Summary Orally-opening tablets are solid pharmaceutical forms that open in the oral cavity in less than 1 minute without leaving any residue. The purpose of this research is to prepare and evaluate fast-opening oral tablets of amlodipine mg5, which is a long-acting blocker of calcium channels used in the treatment of chronic ...
Dissertation Chemistry for Master's Degree Abstract Acrylic-based pressure-sensitive adhesives are more expensive than rubber-based adhesives, but they have a longer life and resistance to high temperatures, chemicals, UV rays, solvents, light, softeners, and the environment. Modification of acrylic pressure-sensitive adhesives is useful for improving adhesion properties. In ...
Master's thesis in the field of polymerization engineering, abstract was determined by using experimental design methods to determine the optimal feed recipe for the preparation of nitrile rubber. Initially, to determine the factors affecting the rate of polymerization, screening tests were designed according to the Plate-Boorman method, which examines a large number of factors ...
Master's Thesis in Food Safety and Health Abstract: Background: Essential oils and extracts obtained from medicinal plants with antimicrobial, anticancer and antioxidant compounds are of particular importance as new and natural medicinal compounds, both in the field of health and treatment of diseases and protection of raw and processed foods. Objective: To determine the ...
Mechanical Engineering Master's Thesis Proposed Design - Introduction The use of fibers in concrete started about 50 years ago and day by day their use in various fields has increased. Adding fibers to the mixing design improves the mechanical properties of concrete and the behavior of the structure after cracking. It also increases the softness and malleability of the section. ...
Master's Thesis of Polymer Science and Technology Engineering Abstract Urethane-acrylate resins are of interest due to their low viscosity and flame retardant properties and relatively easy curing. On the other hand, natural fibers with renewable resources, low price, low density and high special properties have a special ability to be used in composites. However, their ...
Master's Thesis of Polymer Industrial Engineering Abstract Cross-linked polyethylene is one of the materials that is widely used in the field of insulation production in cables due to having suitable electrical properties and good electrical strength. Nowadays, one of the methods of optimizing the properties and changing the behavior of polymers is the use of filler particles ...
Master's Thesis in Mechanical Engineering - Applied Design Abstract In recent years, most of the researches have been focused on compressive and combined loading in order to investigate the buckling of nanotube structures, and for this purpose, the work done on tensile loading is very limited. Since the results of compressive and tensile loading in carbon nanotubes are ...
Dissertation for receiving a master's degree in the field of preservation and modification. Abstract In this research, the effect of combined modification of colloidal silver-hot water on the heat transfer from the hot press plates to the heart of the beech (Fagus orientalis) chipboard cake, the physical and mechanical properties of the chipboard and the chemical changes of the ...
Master's Thesis of Polymer Industry Engineering Abstract Phenolic resins have excellent dimensional, thermal, chemical and corrosion resistance. Also, the fugitives produced during the thermal degradation of this resin have low toxicity and, in addition, they have high charring. Phenolic resins, due to having desirable properties, are used in many fields such as internal parts ...
Dissertation for obtaining a master's degree in the field of health and food safety Abstract background: Jashir plant grows in the cold and mountainous regions of Fars province (Sepidan, etc.) Indigestible carbohydrates (fiber) in the leaves of this plant may play a role as prebiotics in probiotic yogurt. Objective: To investigate the effect of Jashir on the physicochemical ...
Dissertation for Master's Degree in Food Science and Engineering, Food Microbiology, Abstract: Today, the increase in environmental pollution and the decrease in oil resources have led to the development and replacement of biodegradable packaging instead of packaging derived from petroleum resources. Also, in this regard, the use of antimicrobial compounds such as silver ...
Thesis for receiving a master's degree in the field of agricultural engineering, food science and food industry, food technology, abstract. Halva in Iran, despite its high potential in diversity and creating added value, has not been industrially produced to date, and the purpose of this research is to investigate the formulation of wheat flour halva and its production and ...
Dissertation for Master's Degree in Agricultural Engineering, Horticultural Science-Fruiting tendency Abstract Grapes are non-dehiscent fruits with low physiological activity and are very sensitive to water loss and fungal contamination, especially gray mold, during the post-harvest period in the warehouse and during transportation as well as marketing. In the present study, the ...
Dissertation for obtaining a doctorate degree in the field of mechanical engineering - manufacturing and production: the advantages of using semi-solid processes are reducing the amount of gas porosity and shrinkage and modifying the microstructure, which aims to improve the mechanical properties of the part. In this research, the cooling ramp method has been used to produce the ...
Dissertation for Master's Degree in Food Science and Engineering. Abstract Every year, millions of tons of plastic waste, including bags, plastic envelopes, and packaging materials, enter the environment and cause problems to the environmental cycle due to their irreversibility, and as a result, the need for degradable plastics in nature is increasing day by day. Today, the ...
Dissertation for master's degree in horticultural science, fruit work, summary: the use of healthy compounds compatible with human health and nature is one of the important concerns of technology researchers after harvesting horticultural products. The purpose of this research was to investigate the effect of oral coating of aloe vera gel and calcium chloride on the shelf life ...
Dissertation for Master's Degree in Horticulture-Fruit Science Abstract After being separated from the mother plant, the fruit is alive and breathes and undergoes significant changes after harvesting. The storage period of fruits can be increased by optimizing environmental conditions, minimizing mechanical damage and using beneficial compounds such as gibberellins and ...
Mechanical Engineering Master's Thesis - Energy Conversion Abstract Coating with thin layers plays a very important role in semiconductor industries and microelectromechanical and nanoelectromechanical equipment. By adding a thin layer to the surface due to interference of electromagnetic waves, the radiation properties of the surface will be completely different. In this ...
Thesis for Master's Degree in Agricultural Engineering - Physiology and Breeding of Medicinal Plants Abstract: This research was carried out in order to extract, identify the constituent compounds and the antimicrobial properties of the essential oils of two varieties of Khuzestani Marza and Rashingari Marza. Extraction of essential oils was carried out by distillation with ...
Dissertation for receiving a master's degree in food technology, Persian abstract, background and purpose: Olive tree leaves have many compounds, including oleuropein, which are related to the majority of their medicinal properties. Olive leaf extract is also rich in phenolic compounds. In order to extract phenolic compounds, olive leaves must first be dried. Natural drying and ...
Master's Thesis in Food Science and Technology (M.Sc) Major: Food Engineering Abstract In this research, the effect of zadu and CHO gums at 5 levels of 0, 0.1, 0.2, 0.28 and 0.4 percent and gum arabic and xanthan gum at levels of 0, 0.5, 0.9, 1.4, 1.8 and 0.08, respectively. 0.1, 0.15 and 0.2% on the stability, rheological and sensory properties of buttermilk during 59 days of ...
Dissertation for Master's Degree in Horticulture Science Summary: The use of healthy compounds compatible with human health and nature is one of the important concerns of technology researchers after harvesting horticultural products. The purpose of this research was to investigate the effect of oral coating of aloe vera gel and calcium chloride on the shelf life and quality ...
Dissertation for M.Sc degree, major: food microbiology, abstract Sterilized milk products that are prepared by the Faradam method, especially Faradam milk and cream, have opened their place in the diet of Iranian people in recent years. By adding healthy ingredients to products such as breakfast cream, the nutritional value of these products can be improved. In this research, ...
Dissertation for Master's Degree in Animal Science Abstract: In order to determine the chemical composition and physical properties of the second layer of alfalfa fodder in West Azarbaijan province, 72 samples were collected based on randomly classified sampling according to the amount of precipitation in 3 climates (treatments) including: 1) the northern basin of Urmia Lake ...
Dissertation for Master's Degree (M.Sc.) in Agricultural Engineering, Food Science and Industry, Yogurt is the most famous and widely consumed fermented milk product in the world. The most common defect in texture that leads to the non-acceptance of this product by the consumer is water loss. Today, in Iran, condensed yogurt is mostly produced in the reverse way, that is, by ...
Dissertation for obtaining a master's degree in civil engineering, structural orientation, March 2013, abstract of the scope of using FRP materials for shear strengthening of reinforced concrete beams in
Dissertation for Master's Degree in Civil Engineering – Shahrivar Marine Structures, September 1992 Abstract: Pipe-in-pipe systems are widely used in transmission line applications.
Dissertation of master's degree in civil-structural engineering Abstract: Divergent bracing frames are considered earthquake-resistant systems for steel structures. These braces are from my difficulty
Master's Thesis in Civil Engineering - Earthquake Engineering March 2012 Abstract Reinforced soil is a special material that is created from the combination of soil and reinforcing member. Arming components resistant to N
Thesis for receiving the degree of M.Sc. Trend: soil and soil in February 2013 Abstract: Allowed load capacity or safe load capacity is a virtual pressure that is within the range of
Master's Thesis of Faculty of Art and Architecture, Department: Carpet (Painting), October 2013 Abstract: Today, in today's advanced and industrialized world, using new methods, it is trying to make Tul products
Dissertation for M.Sc degree in soil and soil mechanics engineering, summer 2013, first chapter, introduction of micro candles 1-1 Micro-candles in general in dealing with problematic soils
Dissertation for Master's Degree in Polymer Industry Engineering April 2013 Abstract Nowadays, the topic of energy and energy saving in all fields, even in homes, is one of the most important.
Abstract Architecture, as a scientific-artistic profession, has always covered a part of human needs. After modernity and entering the industrial age in Iran, public buildings, especially markets, in urban scale
Chapter 1 1-1-Introduction: Common fluids such as water, oils and ethylene glycol, which are usually used as heat transfer media, have a limited ability in terms of thermal properties, which is the first obstacle to compress and increase the efficiency of heat exchangers. One of the ways to improve heat transfer is to add particles to the fluid. This method is used for fluids ...
Dissertation for Master's Degree in Geography and Rural Planning Abstract Rural spaces are part of human societies and sustainable and integrated national development is aimed at sustainable development at the regional, urban and rural levels. In this regard, the second, third, and fourth economic, social, and cultural development plans have made rural development one of its ...
Dissertation to receive a master's degree in the field of meteorology with an urban orientation. Abstract: The researches conducted in the world mainly indicate a gradual increase in the average temperature. Today, the trend of freezing temperatures is one of the most important climate parameters that are evaluated to prove climate change in a region. Analyzing the trend of the ...
Dissertation for Master's Degree (M.A.) Major: Anthropology Dissertation Abstract (including summary, objectives, implementation methods and results obtained): Since the beginning of civilization, people have had a relationship with the plants around them. Belief in the healing power of plants may have existed among people long before they were recorded. In addition to having a ...
Dissertation to receive a master's degree in educational technology (M.A) Abstract This research was conducted with the aim of investigating the effect of TEAL on learning and memorization of high school chemistry course. The research method was based on quasi-experimental nature with a pre-test-post-test design and a control group. The statistical population in this research is ...
Master's Thesis in Psychology - Assessment and Measurement Abstract The psychometric properties of Harry's stress questionnaire were examined after translation and validity of appearance and content were checked with factor analysis method. A sample of four hundred people from Tehran city were selected by simple random method and available sampling and completed the 66-question ...