Download more than 100 examples of thesis, proposal and project topics about thermal conductivity in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Dissertation for receiving a master's degree in chemical engineering, advanced orientation. Abstract The limitation of heat transfer fluids in various industries due to their poor thermal conductivity has caused the improvement of the heat transfer of working fluids to be considered as a new method of advanced heat transfer. So that the idea of ??dispersing solid particles in ...
Master's Thesis of Polymer Industry Engineering Abstract Phenolic resins have excellent dimensional, thermal, chemical and corrosion resistance. Also, the fugitives produced during the thermal degradation of this resin have low toxicity and, in addition, they have high charring. Phenolic resins, due to having desirable properties, are used in many fields such as internal parts ...
Master's thesis in the field of mechanical engineering, energy conversion trend. Abstract: Considering that heat transfer is widely used in various fields of science, it is necessary to use wide recessed or raised surfaces due to physical and spatial limitations in electrical systems. The main purpose of using these surfaces is to increase heat transfer by increasing the ...
Chapter 1 1-1-Introduction: Common fluids such as water, oils and ethylene glycol, which are usually used as heat transfer media, have a limited ability in terms of thermal properties, which is the first obstacle to compress and increase the efficiency of heat exchangers. One of the ways to improve heat transfer is to add particles to the fluid. This method is used for fluids ...
To receive a master's degree in textile technology engineering. Abstract In the previous research, multi-sized nano-roughness was developed using nanoparticles with different sizes and different surface charges along with silicone resin coating to produce multi-purpose textiles with stable properties. In this research, the idea of ??using laser irradiation and finishing textiles ...
Dissertation for obtaining a doctorate degree in dentistry. Introduction Removing large amounts of dental tissue weakens the restored tooth. The type of restoration and composite method can be one of the influencing factors on tooth fracture resistance under occlusal forces. The purpose of this study was to investigate the effect of using new low-shrinkage composites on the ...
Master's Thesis Field: Electricity Major: Electronics Chapter 1 Basics and Generalities Introduction Today, biosensors are used in various fields such as medicine, chemical industry, food industry, environment and the production of medical-health products [1]. In clinical and medical environments, it is very necessary to have tools to diagnose diseases. The development of ...
Master's Thesis in Chemical Engineering Abstract: The purpose of this thesis is mathematical modeling of rotary dryer for drying dicalcium phosphate. In this project, with different temperature conditions and different number of cycles of the dryer, the moisture level of the product exiting the dryer has been checked. As a result, 100 data have been obtained from the output of ...
Master's Thesis of Chemical Engineering-Biotechnology Abstract The deteriorating energy sources of fossil fuels will make the developing human society suffer from fuel shortage in the not too distant future. As a result, the concerns of the continuous and increasing release of carbon dioxide into the atmosphere, as well as the extent of pollution caused by fossil fuels that have ...
Master's thesis in the field of chemistry, mineral orientation Abstract: Synthesis and identification of the symmetric bis((E)-2-nitrophenylallylidene)-2 and 2-dimethyl-1,3-diamine propane ligands with the general formula MLX2, where M represents zinc (II), cadmium (II) and mercury (II) metals and X includes chloride, bromide, iodide, It is thiocyanate and azide, it was done. To ...
Master's Thesis of Polymer Science and Technology Engineering Abstract Urethane-acrylate resins are of interest due to their low viscosity and flame retardant properties and relatively easy curing. On the other hand, natural fibers with renewable resources, low price, low density and high special properties have a special ability to be used in composites. However, their ...
Dissertation for receiving a master's degree in applied chemistry, Persian abstract. In this research, graphite particles were converted to graphene oxide by Hammer's method. Graphene nanoparticles are one of the best and most effective absorbent materials that have been produced so far. Graphene is one of the successful allotropes of carbon in the field of drug absorption and ...
In order to obtain a master's degree in the field of mechanical engineering, energy conversion, abstract: In this thesis, the mass and heat transfer by integral method in the flow of natural displacement of a fluid with a very low frontal near the wavy inclined wall and under the magnetic field has been investigated. The wall is permeable and as a result, the fluid can be sucked ...
Master's thesis in the field of mechanical engineering - energy conversion trend Abstract: In this research, the turbulent flow of a non-Newtonian nanofluid in a microchannel with a circular cross-section is simulated. First, the types of classification of microchannels, the methods of making microchannels, as well as the advantages and challenges of using microchannels are ...
Dissertation for receiving a master's degree in the field of preservation and modification. Abstract In this research, the effect of combined modification of colloidal silver-hot water on the heat transfer from the hot press plates to the heart of the beech (Fagus orientalis) chipboard cake, the physical and mechanical properties of the chipboard and the chemical changes of the ...
Thesis for obtaining a master's degree in the field: Chemistry, specialization: Analytical Chemistry, Abstract In recent years, the use of nanotubes as nanocarriers for drug delivery has been researched. In this research, carbon nanotubes CNT(5-5), CNT(0-6), BNNT(0-6) and BNNT(5-5) doped with Ga have been used. First, the nanotubes were drawn using Gauss View and Nanotube ...
Dissertation for M.Sc Mechanical Engineering - Energy Conversion Orientation Abstract: In this research, the turbulent flow of a non-Newtonian nanofluid in a microchannel with a circular cross-section is simulated. First, the types of classification of microchannels, the methods of making microchannels, as well as the advantages and challenges of using microchannels are stated. ...
Master's Thesis of Mechanical Engineering-Applied Design Abstract In many applications, graphene (monolayer or multilayer) is used in the polymer matrix as a composite. In this research, ideal graphene with a hexagonal bond shape between atoms, located in a polymer matrix, with different boundary conditions, including gripped and simple, under biaxial external compressive ...
Master's Thesis Field: Electricity Major: Electronics Chapter 1 Basics and Generalities 1-1 Introduction Today, biosensors are used in various fields such as medicine, chemical industry, food industry, environment and the production of pharmaceutical-health products[1]. In clinical and medical environments, it is very necessary to have tools to diagnose diseases. The development ...
Abstract This research was conducted in order to investigate the absorption characteristics of cobalt, cadmium and nickel metals using lemon peel. The effect of different parameters such as solution pH, amount of adsorbent, contact time and temperature on the absorption process was investigated and the optimal operating conditions for the absorption of each element on the ...
Dissertation for M.Sc. Mechanical Engineering - Manufacturing and Production Trend Abstract The manufacture of square and rectangular pipes has received more attention due to their wide use in industries that require high pressure and temperature. There are different methods for making rectangular tubes, including extrusion, stretching and pressing. Another method that has been ...
Abstract: Research in the field of heat transfer of suspensions with nanometer-sized solid particles in the base fluid has started in the last decade. Recent research in the field of nanofluids has shown that the addition of nanoparticles causes a significant increase in the heat transfer of the suspension. Another common way to improve the thermal performance of devices is to ...
Thesis for receiving a master's degree in the field of mechanics, energy conversion, abstract: free or natural convection heat transfer is one of the most useful phenomena in industry and in the environment around humanity. Due to its wide application, this phenomenon has attracted the attention of many researchers and has prompted researchers to follow the flow of free movement ...
Dissertation for Master's Degree in Mechanical Engineering (Energy Conversion) Abstract In this thesis, the mass and heat transfer of water-aluminum oxide nanofluid in a two-dimensional porous medium under a magnetic field and in the vicinity of a vertical wall has been investigated. The boundary wall can be permeable or impermeable. The concentration and temperature of the wall ...
Master's Thesis on Energy Conversion Abstract: Increasing heat transfer as well as increasing energy efficiency due to the limitation of natural resources and reducing costs has always been one of the most basic concerns of engineers and researchers. This is especially important in fluids due to the small thermal conductivity coefficient. One of the most important ways to ...
To obtain a master's degree in mechanical engineering - manufacturing and production. Abstract: The electric discharge machining process is one of the advanced machining processes, which is one of the important applications of this process. Despite the unique applications of this machining method, low chipping rate, high surface roughness, high tool wear rate and environmental ...
Master's Thesis on Energy Conversion Abstract: Increasing heat transfer as well as increasing the efficiency of energy storage systems due to the limitation of natural resources and with the aim of reducing costs has always been one of the most basic concerns of engineers and researchers. This is especially important in fluids due to the small thermal conductivity coefficient. ...
Master's Thesis in Mechanical Engineering (Energy Conversion) Abstract Numerical investigation of three-dimensional heat transfer in traveling wave amplifier collector with input power of 900 and 3000 watts, traveling wave lamp[1] is one of the types of microwave amplifiers. This lamp consists of five main parts, which are electron gun, slow wave structure, wave input and output ...
Dissertation for Master's Degree in Mechatronics Abstract In this thesis, a phase-locked loop is designed based on micro-electromechanical systems. The loop system has a feedback phase lock that compares the input phase with the output phase. This comparison is done by a phase detector. Phase detector is a circuit whose average output voltage is linearly proportional to the ...
Master's Thesis in Chemical Engineering, Process Design, Abstract: In this thesis, a method for thermodynamic analysis and evaluation of energy consumption of distillation tower by using side cooling is introduced. The research done in the past was aimed at the distribution of the heat diagram and checking the possibility of adding or extracting heat from all the different parts ...
Master's degree thesis in the field of chemical engineering, thermokinetic and catalyst orientation. Abstract The purpose of this research is to estimate the electrical conductivity of natural waters based on modern mathematical methods. To achieve this, the waters of the Karaj and Jajrud rivers are considered as special cases. For this purpose, 20 sampling stations were ...
Presented to graduate education management as a part of the educational activities required to obtain a master's degree, the dimensions of MEMS components according to Figure (1-2) include a wide range, from dimensions smaller than one micrometer that are not visible to the eye to dimensions of one millimeter, also types of these systems can be in a simple state, a tool without ...
Master's Thesis in Polymerization Engineering Abstract In this research, the thermal and catalytic pyrolysis of four types of polymers such as heavy polyethylene and polypropylene and two styrene butadiene rubber and polybutadiene rubber in a semi-continuous stirred reactor under nitrogen gas and using HZSM-5, FCC and H-Mordenite catalysts has been investigated. In this study, ...
Dissertation for M.Sc degree in food science and industry Abstract Oils and fats are oxidized during storage at high temperatures and their nutritional quality decreases. The process of oxidation of oils and fats and the formation of free radicals causes the development and development of cancer. These damages can be prevented by consuming antioxidant compounds found in fruits ...
Master's Thesis in Mechanical Engineering, Applied Design, Abstract: Microelectromechanical systems are generally classified based on the type of their excitation mechanism. In addition to electrostatic excitation, which is considered as one of the most important excitation mechanisms, thermal excitation is widely used in multi-layered and functionally variable ...
The thesis submitted to graduate education management as part of the educational activities required to obtain a master's degree in the field of mechatronics. Abstract In this thesis, a phase-locked loop is designed based on micro-electromechanical systems. The loop system has a feedback phase lock that compares the input phase with the output phase. This comparison is done by a ...
Dissertation for M.Sc Master's degree, mechanical engineering-applied design Abstract With the emergence of composite materials, a huge progress was achieved in many engineering applications. Nevertheless, problems such as delamination, stress concentration, and discontinuous distribution of stress, the idea of ??creating a new type of composite materials in which properties ...
Dissertation for receiving a master's degree in the field: Food Science and Industry Abstract: In addition to changing the organoleptic characteristics of the food, the oxidation of oils reduces the nutritional value and shelf life of oils and has a negative effect on the health of consumers due to the production of undesirable compounds in the oil. There are many ways to ...
Master's Thesis in Mechanical Engineering, Energy Conversion, Abstract: Thermal energy storage and phase change materials for use in heating and cooling systems of buildings has become an important issue in the last 20 years. When there is a mismatch between energy production and its consumption time, the issue of energy storage becomes important. In the present work, the fluid ...
Dissertation for Master's Degree in Food Science and Technology, Food Technology, Abstract: In addition to changing the organoleptic characteristics of food, oxidation of oils reduces the nutritional value and shelf life of oils and is harmful to the health of consumers due to the production of undesirable compounds in oil. To prevent oxidation, there are several methods, one of ...
Dissertation for master's degree in mechanical engineering, construction and production trend. Abstract One of the important topics in the field of welding in engineering structures is the discussion of reducing residual stresses in welding lines and improving the quality of welding. Residual stresses reduce the load bearing limit, the life of welded joints and change the forms ...
Dissertation for Master's Degree in Civil Engineering – Shahrivar Marine Structures, September 1992 Abstract: Pipe-in-pipe systems are widely used in transmission line applications.
Master's Thesis of Information Technology Management (M.Sc) academic year 1389-1390 Abstract In order to study and predict the distribution pattern of economically important benthic fish, catch data of 10 species
Thesis for receiving a master's degree in the field of architecture 06/93 abstract Today, as a result of the application of massification and downsizing policy in large urban societies, traditional housing has lost its meaning and concept
Abstract Today, rice is the main food of more than half of the world's population and rice is cultivated in five continents and more than forty countries. Rice is one of the main meals of the people of Iran, until 1340, Iran exported more or less rice annually, and since then, as a result of the improvement of the economic situation of the people and the rapid increase of the ...
Dissertation for Master's Degree in Polymer Industry Engineering April 2013 Abstract Nowadays, the topic of energy and energy saving in all fields, even in homes, is one of the most important.
Dissertation for receiving a master's degree (M.A) in the field of architecture – Architectural engineering trend spring 2014 Urban safety area, fire training centers are one of the most effective places in the three training departments
Dissertation for M.Sc. Natural Geography-Climate Chapter 1 General Research Introduction Tourism is one of the largest industries in the world, which has a fast growth. For many areas, tourism is the most important source of income, and for other areas, the economic return from tourism is very high (Masoompour, Khosh-Akhlaq). According to the forecast of the World Tourism ...
The first chapter of the general research 1-1- Introduction The increasing development of natural resources and environmental science in the world has led to the creation of new branches of related sciences and industries, each of which in turn has the ability to influence the natural environment. The knowledge of ecotourism or nature tourism is considered as one of the most ...
Abstract: All crops are different from each other in terms of biological characteristics and environmental needs, while the natural and environmental characteristics of the land also have drastic changes from one region to another. Many factors affect the growth and development of plants. Some of these factors include: the amount of energy received from the sun, the temperature ...
Dissertation for obtaining a master's degree in the field: Natural Geography, specialization: Geomorphology in environmental planning. Abstract: Flood is one of the most destructive natural disasters, which is usually associated with a lot of human and financial losses. Floods every year in the corners of the country cause a lot of damage to economic resources. The occurrence of ...
Master's thesis in the field of natural geography, climatology and environmental planning, abstract human civilization is based on the stability of climatic conditions, therefore climate change can be considered a threat to human civilization. In recent years, climate scientists have tried to trace these changes for some climatic elements, the most important of which is ...
Dissertation for receiving a master's degree in the field of natural geography, climatology, first chapter, general research 1- 1- Introduction The tourism industry is one of the most important industries for economic growth in developed and developing countries (Font and Ahjem [1], 1999: 63). Currently, many countries receive their economic and social benefits from tourism and ...
Dissertation for Master's Degree (M.Sc) Field: Natural Geography - Applied Climatology Abstract Due to its location in a special geographical location, topographic conditions and climatic systems affecting the region, the city of Kavus has a relatively cold climate. So that the air temperature in the coldest month of the year reaches 9.2 degrees Celsius and has the highest ...
Dissertation for Master's Degree (M.Sc) Field: Natural Geography - Hydrology and Synoptic Meteorology Abstract Damages caused by critical cold temperatures are increasing, especially in natural ecosystems and densely populated urban areas. Central Iran is a dry land prone to cold weather, especially during winter, and lacks resources to moderate temperature tensions, such as ...
Dissertation to receive the master's degree ""M.S.c"" specialization: Textile chemistry and fiber science Abstract: One of the important processes in the completion of textile goods is the underhand improvement in textiles. Finishing the softener provides a desirable softness to the fabric and improves its properties, and the main goals of the softener are to reduce static ...
Dissertation for M.Sc Master's Degree in Remote Sensing and Geographical Information System - Water and Soil Resources Abstract: Urban heat islands are areas of the earth's surface that have a higher temperature than neighboring areas. The spread of this phenomenon varies in space and time. The creation of thermal islands and its spatial and temporal changes are mostly ...
Dissertation for receiving a master's degree in the field of natural geography, climatology. Abstract: Lake Urmia National Park is considered one of the most interesting and beautiful natural habitats of animals in Iran after the Anzali Marsh. Lake Urmia, due to its natural advantages and God-given gifts, can become one of the important factors in attracting tourists, both ...
Dissertation for obtaining a master's degree in electrical engineering, electronics, abstract, accurate measurement and control of temperature in industrial and research systems is of particular importance, and the correct operation of some industrial and laboratory tools is possible only in a certain location with a small number of channels (maximum 8 channels). Therefore, the ...
Master's Thesis on Natural Resources - Desertification Abstract Mangrove forests are located in the southern coastal areas of Iran, and due to their numerous functions and environmental values, it is necessary to protect, restore and develop them. Deciding the way to act in a certain way is consciously to achieve the goals, so as to choose a suitable option among various ...
Dissertation for Master's Degree in Electrical Engineering, Power Systems, Abstract: In this thesis project, a new analytical approach is proposed for planning electric energy production and determining the amount and storage location of rotating storage corresponding to the risk level of subscriber load points through profit/cost analysis in the optimization program of shared ...
Dissertation for master's degree in electrical engineering, power orientation. Abstract The limitation of fossil fuel resources and the possibility of running out of fossil energy reserves, global warming, environmental pollution, price instability, as well as the increasing need of industrial and urban centers for energy, have made the international community think of suitable ...
Dissertation for Master's Degree in Electrical Engineering, Power Systems, Abstract: During the last two decades, the electricity industry has undergone fundamental changes in the way it is produced, transmitted and distributed, which is referred to as restructuring. With the restructuring in the electricity industry, reactive power has been introduced as one of the most ...
Master's thesis in the field of power electronics, power electronics, Abstract: The use of pulsed power sources in various plasma processes is increasing due to the relationship established between them. According to the research done in this case, the design of pulsed power sources with the aim of reducing losses and increasing efficiency can have important effects on plasma ...
Dissertation for M.Sc. Abstract A wireless sensor network is a network consisting of many small nodes. The node receives information about the environment through sensors. The energy consumption of the nodes is usually provided by batteries, which in most cases cannot be replaced. Therefore, the consumption power of nodes is an important issue in these networks. And it is very ...
Dissertation for master's degree in electricity, power orientation Abstract: The production of electrical energy for power systems with the aim of minimizing the total cost of production for active units in the power network is one of the most important topics for today's modern systems. In other words, the purpose of economic load distribution is optimal and appropriate ...
Abstract The main task of the synchronous generator excitation system is to provide the necessary voltage for the generator excitation winding. The excitation voltage is a dc voltage and it is used to create a flux in the excitation winding of the generator and consequently to produce a magnetic field to produce electrical energy by a synchronous generator. In the provided ...
Master's Thesis in Computer Engineering (Software) Abstract: Reducing energy consumption in the cloud environment using virtual machine migration Reducing energy consumption is one of the most important issues of the day, especially in the industry sector. In recent years, the ever-increasing human needs for computer systems have caused the creation and expansion of more and ...
Dissertation for Master's Degree in Civil Engineering - Structures Abstract: One of the important problems in seismic design and implementation of buildings is the significant dead weight used in it. Therefore, in the case of using lightweight concrete that has favorable mechanical properties, significant benefits can be obtained, including a reduction in dead load and ...
Dissertation for Master's Degree > Direction: Hydraulic Structures Abstract: One of the assumptions that is made to simplify the dynamic analysis of the existing weighted concrete dams is the uniformity of the foundation in terms of physical parameters such as modulus of elasticity and damping. This is despite the fact that, in practice, different geological conditions may ...
Master's Thesis of Mapping Engineering Field of Remote Sensing Abstract Updating land databases in urban environment is a difficult and costly task. Satellite remote sensing techniques have been widely used in the extraction and control of land cover change at different scales, which have led to useful results. Doing this becomes easier with the help of automatic change ...
Master's Thesis of Structures Abstract In the welding process, after a stage of cooling of the body, due to the uneven distribution of temperature, stresses remain in it, which are called residual stresses. To obtain these stresses, the temperature history of the object during the welding process must be available. For this purpose, first a thermal analysis is done to obtain the ...
Dissertation for master's degree in the field of civil engineering, road and transportation, the abstract of asphalt failures is one of the problems that are the concern of road and transportation engineers today, and every year huge costs are spent on the maintenance and repair of asphalt roads. Many efforts have been made to increase the strength and life of asphalt, among ...
Master's Thesis in Civil-Structural Engineering Today, domes and arches have found wide applications in architectural and industrial structures due to their suitable coverage of large openings. The use of today's technologies in styling and optimizing energy consumption in these types of structures is one of the important challenges facing engineers. Therefore, the need to ...
In order to receive a master's degree in textile technology, it is essential to know the physical and mechanical properties of carpets to produce a quality product and maintain the proper appearance. In this research, an attempt has been made to provide a model to determine the relationship between the different parameters of these characteristics, therefore, to measure these ...
Master's Thesis Field: MBA Abstract About two-thirds of the world's energy is consumed in cities. Along with the many solutions that have been provided to reduce the energy demand, some technologies and researches have also been aimed at optimizing the energy supply. The technology of simultaneous production of electricity and heat is among the technologies that have been ...
Dissertation for master's degree in civil engineering, structural orientation. Abstract Good bond strength between the old and new concrete surface is a key factor in the performance of concrete repairs. The purpose of this thesis is to investigate and evaluate the bond strength between the surface of the old concrete and the added concrete. In this thesis, a laboratory research ...
Master's Thesis of Water Engineering - Water Resources Management Abstract The advance of salt water in fresh water aquifers is not limited to the islands and coasts of oceans, seas and salt lakes, but it is possible for salt water aquifers to advance through deserts, swamps and salt water pits in the adjacent fresh water aquifers, making it salty and unusable in critical ...