Download more than 100 examples of thesis, proposal and project topics about thermal analysis in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Master's Thesis in Chemical Engineering, Process Design, Abstract: In this thesis, a method for thermodynamic analysis and evaluation of energy consumption of distillation tower by using side cooling is introduced. The research done in the past was aimed at the distribution of the heat diagram and checking the possibility of adding or extracting heat from all the different parts ...
Dissertation for M.Sc Master's degree, mechanical engineering-applied design Abstract With the emergence of composite materials, a huge progress was achieved in many engineering applications. Nevertheless, problems such as delamination, stress concentration, and discontinuous distribution of stress, the idea of ??creating a new type of composite materials in which properties ...
Master's Thesis in Mechanical Engineering, Energy Conversion, Abstract: Thermal energy storage and phase change materials for use in heating and cooling systems of buildings has become an important issue in the last 20 years. When there is a mismatch between energy production and its consumption time, the issue of energy storage becomes important. In the present work, the fluid ...
Master's Thesis of Mapping Engineering Field of Remote Sensing Abstract Updating land databases in urban environment is a difficult and costly task. Satellite remote sensing techniques have been widely used in the extraction and control of land cover change at different scales, which have led to useful results. Doing this becomes easier with the help of automatic change ...
Master's Thesis of Structures Abstract In the welding process, after a stage of cooling of the body, due to the uneven distribution of temperature, stresses remain in it, which are called residual stresses. To obtain these stresses, the temperature history of the object during the welding process must be available. For this purpose, first a thermal analysis is done to obtain the ...
Master's Thesis in Polymerization Engineering Abstract In this research, the thermal and catalytic pyrolysis of four types of polymers such as heavy polyethylene and polypropylene and two styrene butadiene rubber and polybutadiene rubber in a semi-continuous stirred reactor under nitrogen gas and using HZSM-5, FCC and H-Mordenite catalysts has been investigated. In this study, ...
Master's Thesis in Mechanical Engineering, Applied Design, Abstract: Microelectromechanical systems are generally classified based on the type of their excitation mechanism. In addition to electrostatic excitation, which is considered as one of the most important excitation mechanisms, thermal excitation is widely used in multi-layered and functionally variable ...
Dissertation for Master's Degree in Mechanical Engineering (Applied Design) Abstract: Electromechanical micro and nano systems have been noticed due to their distinctive features and unique characteristics, mainly in the two fields of sensors and sensors, in various sciences such as mechanics, aerospace and medicine. Electrostatic stimulation is one of the simplest and most ...
Dissertation for Master's Degree in Energy Systems Engineering Abstract Currently in Iran, there are many gas turbines producing electrical energy whose efficiency is around 30% to 40% depending on the environmental and functional conditions, in fact two thirds of this energy from fuel combustion is wasted through exhaust fumes and thermal waste. In order to increase the ...
Master's thesis in the field of mechanical engineering, energy conversion trend. Abstract: Considering that heat transfer is widely used in various fields of science, it is necessary to use wide recessed or raised surfaces due to physical and spatial limitations in electrical systems. The main purpose of using these surfaces is to increase heat transfer by increasing the ...
Master's Thesis of Energy Conversion Mechanical Engineering Abstract In recent years, due to the importance of finding energy, global warming and environmental pollution and its production sources, and the growing need of various industries for various forms of energy, as well as the large volume of its consumers around the world, the need to provide models to optimize energy ...
Dissertation for M.Sc. Mechanical Engineering - Manufacturing and Production Trend Abstract The manufacture of square and rectangular pipes has received more attention due to their wide use in industries that require high pressure and temperature. There are different methods for making rectangular tubes, including extrusion, stretching and pressing. Another method that has been ...
Dissertation for Master's Degree in Mechanical Engineering Field: Applied Design Abstract In this thesis, stability analysis of composite beam reinforced with carbon nanotubes on elastic support under axial force is investigated. The distribution of nanotubes is assumed to be uniform[1]. To determine the properties of materials reinforced with nanotubes, the results of molecular ...
Master's Thesis in Mechanical Engineering - Applied Design Abstract of elastoplastic analysis of thick-walled tanks made of targeted materials with linear kinematic stiffness behavior under cyclic loading, stress analysis and deformation of spherical thick-walled tanks made of subject materials under internal pressure loading and temperature difference are discussed in this ...
Master's Thesis in Mechanical Engineering (Applied Design) Abstract of Gas Turbine Rotor Stress Analysis Using Continuous Damage Mechanics In this thesis, Lometer's unified model based on continuous damage mechanics is used to model the stress-strain behavior of a gas turbine rotor sample. The unified damage law, which is used to model creep-fatigue interaction, is based on the ...
Doctoral Dissertation on Energy Conversion Abstract One of the most important issues in internal combustion engines is heat transfer in them; Because almost a third of the energy produced inside the combustion chamber is removed through engine cooling. The heat transfer of internal combustion engines is important from various aspects, including the protection of materials used ...
Dissertation for M.Sc. Mechanical engineering trend - applied design In this research, a wind turbine with a vertical axis of the Savonius model is modeled. The wind turbine has been modeled in the fluid control volume, which is the same as the wind tunnel in real conditions, and has been investigated under wind blowing with different speeds. Also, in terms of overlap ratio, it ...
Dissertation for the Master's degree ""M.Sc"" in Mechanical Engineering - Energy Conversion. Abstract In this thesis, experimental analysis along with numerical simulation has been carried out to investigate the performance of Savunius vertical axis wind turbine. In order to carry out the tests, the turbine was tested in the subsonic wind tunnel. In order to check the accuracy ...
Abstract Today, rice is the main food of more than half of the world's population and rice is cultivated in five continents and more than forty countries. Rice is one of the main meals of the people of Iran, until 1340, Iran exported more or less rice annually, and since then, as a result of the improvement of the economic situation of the people and the rapid increase of the ...
Dissertation for Master's Degree in Polymer Industry Engineering April 2013 Abstract Nowadays, the topic of energy and energy saving in all fields, even in homes, is one of the most important.
Dissertation for receiving a master's degree (M.A) in the field of architecture – Architectural engineering trend spring 2014 Urban safety area, fire training centers are one of the most effective places in the three training departments
Master's thesis in the field of natural geography, climatology and environmental planning, abstract human civilization is based on the stability of climatic conditions, therefore climate change can be considered a threat to human civilization. In recent years, climate scientists have tried to trace these changes for some climatic elements, the most important of which is ...
Dissertation for receiving a master's degree in the field of natural geography, climatology, first chapter, general research 1- 1- Introduction The tourism industry is one of the most important industries for economic growth in developed and developing countries (Font and Ahjem [1], 1999: 63). Currently, many countries receive their economic and social benefits from tourism and ...
Dissertation for Master's Degree (M.Sc) Field: Natural Geography - Hydrology and Synoptic Meteorology Abstract Damages caused by critical cold temperatures are increasing, especially in natural ecosystems and densely populated urban areas. Central Iran is a dry land prone to cold weather, especially during winter, and lacks resources to moderate temperature tensions, such as ...
Dissertation for receiving a master's degree in the field of natural geography, climatology. Abstract: Lake Urmia National Park is considered one of the most interesting and beautiful natural habitats of animals in Iran after the Anzali Marsh. Lake Urmia, due to its natural advantages and God-given gifts, can become one of the important factors in attracting tourists, both ...
Dissertation for Master's Degree in Electrical Engineering, Power Systems, Abstract: In this thesis project, a new analytical approach is proposed for planning electric energy production and determining the amount and storage location of rotating storage corresponding to the risk level of subscriber load points through profit/cost analysis in the optimization program of shared ...
Dissertation for master's degree in electrical engineering, power orientation. Abstract The limitation of fossil fuel resources and the possibility of running out of fossil energy reserves, global warming, environmental pollution, price instability, as well as the increasing need of industrial and urban centers for energy, have made the international community think of suitable ...
Dissertation for M.Sc. Abstract A wireless sensor network is a network consisting of many small nodes. The node receives information about the environment through sensors. The energy consumption of the nodes is usually provided by batteries, which in most cases cannot be replaced. Therefore, the consumption power of nodes is an important issue in these networks. And it is very ...
Dissertation for Master's Degree > Direction: Hydraulic Structures Abstract: One of the assumptions that is made to simplify the dynamic analysis of the existing weighted concrete dams is the uniformity of the foundation in terms of physical parameters such as modulus of elasticity and damping. This is despite the fact that, in practice, different geological conditions may ...
Dissertation for master's degree in the field of civil engineering, road and transportation, the abstract of asphalt failures is one of the problems that are the concern of road and transportation engineers today, and every year huge costs are spent on the maintenance and repair of asphalt roads. Many efforts have been made to increase the strength and life of asphalt, among ...
Master's Thesis in Civil-Structural Engineering Today, domes and arches have found wide applications in architectural and industrial structures due to their suitable coverage of large openings. The use of today's technologies in styling and optimizing energy consumption in these types of structures is one of the important challenges facing engineers. Therefore, the need to ...
In order to receive a master's degree in textile technology, it is essential to know the physical and mechanical properties of carpets to produce a quality product and maintain the proper appearance. In this research, an attempt has been made to provide a model to determine the relationship between the different parameters of these characteristics, therefore, to measure these ...
Master's Thesis Field: MBA Abstract About two-thirds of the world's energy is consumed in cities. Along with the many solutions that have been provided to reduce the energy demand, some technologies and researches have also been aimed at optimizing the energy supply. The technology of simultaneous production of electricity and heat is among the technologies that have been ...
Dissertation of the master's course in electrical field (M. Sc) orientation: power Abstract: In this thesis, electrical and mechanical defects in electric machines are examined and the factors that cause them and the methods of fixing these defects are stated. After that, with the help of the winding function method of the simulation machine and the intended error, i.e. the ...
Master's Thesis in the field of Chemical Engineering Abstract Investigation of parameters affecting the production of alumina gel by sol-gel method Sol-gel method is one of the common methods that is widely used to produce different nanoparticles. In this method, a solution of initiators is mixed with water in the presence of a catalyst, and hydrolysis and polymerization ...
Dissertation for Master's Degree in Analytical Chemistry Abstract: Today, modern catalysts are used in the petrochemical industry for various reactions. Zeolites in the more advanced form of ""nano zeolite"" are very important in this regard due to their high surface area. The aim of this research is to provide a ""spectroscopy-chemimetry"" method and to provide an optimal ...
Dissertation for obtaining a doctorate degree in dentistry. Introduction Removing large amounts of dental tissue weakens the restored tooth. The type of restoration and composite method can be one of the influencing factors on tooth fracture resistance under occlusal forces. The purpose of this study was to investigate the effect of using new low-shrinkage composites on the ...
Master's Thesis in Electrical Engineering (M. S. C) Major: Power Abstract At present, fossil resources are rapidly running out, and with increasing concern about air pollution and global warming, experts are thinking of using cleaner energy sources and more compatible with the environment. Among these, wind power and solar energy are two types of huge renewable energy sources. ...
Dissertation for M.A. degree. ""Trend of Biotechnology"" Abstract Today, due to the reduction of fossil fuel sources and the destructive effects of these types of fuels on the environment, researchers are thinking of replacing them. In recent years, biodiesel fuel is considered the most suitable alternative to diesel fuel due to its renewable nature and less pollution. The ...
Master's thesis in the field of polymerization engineering, abstract was determined by using experimental design methods to determine the optimal feed recipe for the preparation of nitrile rubber. Initially, to determine the factors affecting the rate of polymerization, screening tests were designed according to the Plate-Boorman method, which examines a large number of factors ...
Thesis of the master's degree in the field: chemical engineering, abstract. In designing the network of heat exchangers, the designer usually considers high operational flexibility in the presented plan. However, some of the changes that occur in the operating conditions of the process after the design, determine the need to modify the existing network. The purpose of the ...
Dissertation for Master's Degree in Chemical Engineering Abstract According to reports, heterogeneous photocatalysts are suitable for photodegradation of polluting compounds. Many semiconducting metal oxides such as: TiO2, SnO2, ZnO2, etc. can be used as photocatalysts in water splitting reactions, synthesis of organic compounds and removal of wastewater pollution. synthesized ...
Master's thesis in the field of chemistry, mineral orientation Abstract: Synthesis and identification of the symmetric bis((E)-2-nitrophenylallylidene)-2 and 2-dimethyl-1,3-diamine propane ligands with the general formula MLX2, where M represents zinc (II), cadmium (II) and mercury (II) metals and X includes chloride, bromide, iodide, It is thiocyanate and azide, it was done. To ...
Master's Thesis in Mechanical Engineering - Applied Design Abstract In recent years, most of the researches have been focused on compressive and combined loading in order to investigate the buckling of nanotube structures, and for this purpose, the work done on tensile loading is very limited. Since the results of compressive and tensile loading in carbon nanotubes are ...
Introduction Engineers are always looking for better quality. In mathematics and computer science, it is the process of choosing or finding the best member in the sets of available options. Every process has the potential to be optimized and complex problems can be modeled as optimization problems in the fields of engineering, economic and business sciences. The goal of modeling ...
Dissertation for Master's Degree in Electrical Engineering, Power Systems, Abstract: In this thesis project, a new analytical approach is proposed for planning electric energy production and determining the amount and location of storage of rotating storage corresponding to the risk level of subscriber load points through profit/cost analysis in the optimization program for the ...
Master's Thesis of Polymer Industry Engineering Abstract With the progress of human civilization, technology development and the ever-increasing population, the world is currently facing a problem called pollution that threatens the lives of the inhabitants of the earth. Pollution caused by the accumulation of persistent toxic compounds in soil and water, such as chemicals, ...
Thesis for obtaining a master's degree in the field: Chemistry, specialization: Analytical Chemistry, Abstract In recent years, the use of nanotubes as nanocarriers for drug delivery has been researched. In this research, carbon nanotubes CNT(5-5), CNT(0-6), BNNT(0-6) and BNNT(5-5) doped with Ga have been used. First, the nanotubes were drawn using Gauss View and Nanotube ...
Dissertation for receiving M.Sc degree in mechanical-structural engineering and the production of aluminide permeable coatings for the protection of gas turbines used in power plant, aviation, marine, oil and gas and petrochemical industries, which are mainly attacked by high temperature oxidation and hot corrosion phenomena. In this research, in order to use the effect of ...
Master's thesis in the field of bioelectrical-medical engineering. Abstract Presenting a method for segmenting the right and left ventricles from cardiac MRI images. Examining the structure and function of cardiac ventricles in magnetic resonance images is considered an important step in the management of many cardiac disorders. Although the manual segmentation of heart ...
Dissertation for obtaining a doctorate degree in the field of mechanical engineering - manufacturing and production: the advantages of using semi-solid processes are reducing the amount of gas porosity and shrinkage and modifying the microstructure, which aims to improve the mechanical properties of the part. In this research, the cooling ramp method has been used to produce the ...
Dissertation for M.Sc. The tendency of the abstract power transmission networks of modern power systems is increasingly changing due to the increase in demand and limitations in the construction of new lines. One of the consequences of such a stressed system is the risk of losing stability after a disturbance. Flexible alternating current transmission systems (facts) are very ...
Thesis for Master's Degree in Energy Conversion (M.Sc.) Abstract The country of Iran is located between the orbits of 25 to 40 degrees north latitude and is located in an area that is among the highest in the world in terms of receiving solar energy. The amount of solar radiation in Iran is estimated between 1800 and 2200 kilowatt hours per square meter per year, which is higher ...
A master's thesis in the field of mechanics, applied design, abstract. These two characteristics are caused by phase transformations under different thermodynamic loadings. Depending on these two mentioned features, memory alloys can be used as actuators in different forms. These structures can be used in different fields such as medicine, aerospace, knowledge
The thesis (or dissertation) for receiving a master's degree in the field of food industry, majoring in food chemistry. The abstract of this study is designed to compare the chemical composition and antioxidant effect of laboratory cinnamon essential oil [1] and two commercial essential oils [2]. In order to identify the chemical compounds of the essential oils, a mechanical ...
Master's Thesis in Electrical Engineering ""M.SC."" Direction: Abstract The power of using electric vehicles such as hybrid electric vehicles in the transportation industry is increasing day by day. The battery of these cars can be charged through a home power socket or through public parking lots. Additional load caused by car battery charging can cause harmful consequences on ...
Dissertation for M.Sc Mechanical Engineering - Energy Conversion Trend Abstract In the last century, with the increasing demand for energy and the reduction of fossil fuel resources, the role of renewable energy in the progress and development of countries is not hidden from anyone. In the meantime, wind energy has a special share and has the highest growth rate among other ...
Dissertation of the Master's course in the field of electricity (M. Sc) orientation: power Abstract: In this thesis, electrical and mechanical defects in electric machines are first examined and the factors causing them and the methods of fixing these defects are stated. After that, with the help of the winding function method of the simulation machine and the intended error, ...
Master's thesis in the field of mechanical engineering - energy conversion trend. Abstract Numerical simulation of a flow measurement microsensor in a real human aorta model. Arterial diseases, especially arteriosclerosis and vasodilation, are among the most important causes of sudden death in the world. There are different methods for diagnosing these diseases, and in this ...
Master's Thesis of Energy Systems Optimization of Steam Network in Shiraz Oil Refining Company, the costs of power supply and required power of operational processes take up a significant part of the financial resources and costs of every industrial complex, and the continuous supply of required energy is always one of the main concerns of industrial designers and managers. The ...
Master's Thesis Applied Design Abstract In this thesis, in the field of vacuum technology, the importance, application and role of this technology in the industry and the advancement of scientific research, technical terms related to this technology, types of vacuum pumps, applications, advantages and disadvantages of each of the vacuum pumps, the importance of studying the ...
Thesis for receiving a master's degree in the field of mechanics, energy conversion, abstract: free or natural convection heat transfer is one of the most useful phenomena in industry and in the environment around humanity. Due to its wide application, this phenomenon has attracted the attention of many researchers and has prompted researchers to follow the flow of free movement ...
Master's Thesis in Energy Systems Abstract In recent years, the possibility of using solar energy for cooling and dehumidification has occupied the human mind. Solar absorption cooling systems (Solar Absorption Cycles) have advantages such as not being environmentally dangerous and low energy consumption, especially during electrical peak hours. In addition, since the cost of ...
Abstract: Considering the reduction of underground water resources and fossil fuels in today's world and also in Iran, prevention of energy waste and introduction of new methods in the preparation of potable fresh water from sea water will have a special place in the future world. Using methods such as evaporation-distillation methods can be one of these methods. Due to the high ...
Master's Thesis in Energy Systems Abstract Crude oil distillation unit is one of the most important and critical operational units of any refinery. This unit often requires revision in the design of the structure (Revamping) or making small changes in its existing condition without the need to reduce or increase the basic process devices (Retrofitting) in order to achieve higher ...
Master's Thesis on Energy Conversion Abstract: Increasing heat transfer as well as increasing energy efficiency due to the limitation of natural resources and reducing costs has always been one of the most basic concerns of engineers and researchers. This is especially important in fluids due to the small thermal conductivity coefficient. One of the most important ways to ...
Dissertation for M.Sc degree, major: food microbiology, abstract Sterilized milk products that are prepared by the Faradam method, especially Faradam milk and cream, have opened their place in the diet of Iranian people in recent years. By adding healthy ingredients to products such as breakfast cream, the nutritional value of these products can be improved. In this research, ...
Master's Thesis on Car Structure and Body Abstract In recent years, many researchers have allocated their attention to a special category of materials, memory materials. The ability to absorb and control vibrations actively or passively, respectively, is affected by the features of shape memory and hysteresis energy loss caused by the pseudo-elastic characteristics of these ...
To obtain a master's degree in mechanical engineering - manufacturing and production. Abstract: The electric discharge machining process is one of the advanced machining processes, which is one of the important applications of this process. Despite the unique applications of this machining method, low chipping rate, high surface roughness, high tool wear rate and environmental ...
Master's Thesis in Mechanical Engineering (Energy Conversion) Abstract Numerical investigation of three-dimensional heat transfer in traveling wave amplifier collector with input power of 900 and 3000 watts, traveling wave lamp[1] is one of the types of microwave amplifiers. This lamp consists of five main parts, which are electron gun, slow wave structure, wave input and output ...
Thesis - Master's Degree in Geophysics - Seismology 2012 Abstract Seismic hazard estimation to calculate a certain level of damage and vulnerability in the design of structures is one of the most important topics and principles of earthquake engineering, but
Thesis of master's degree in civil engineering, soil and foundation mechanics orientation, September 2019, abstract: analysis of dynamic interaction between soil and structure (due to the mutual effect of the structure and its retaining soil on each other), D
Abstract The general purpose of the research is to analyze the content of social studies books for the fourth and fifth grades of elementary school based on metacognitive skills. Descriptive research method and basically a ""research"" Content analysis " is cup
Dissertation for master's degree in civil-structural field winter 2012 Abstract In recent years, the number of buildings that have suffered damage due to the loss of their gravity-bearing members has increased. Therefore, it has become important to design structures so that they are resistant to progressive damage in addition to the effects of earthquakes. One of the factors ...
Dissertation of master's course in the field of educational sciences, history and philosophy of education, winter 93 Abstract: This research aims to analyze the content of moral concepts and themes in the Holy Quran and with the aim of
Dissertation for receiving master's degree (M.A) in regional planning orientation, winter 2013 Abstract: Today, many researchers pay attention to the role of tourism in economic and social development
Dissertation for obtaining a master's degree in industrial management (production orientation) (case study of universities in Semnan and Golestan provinces) Summer 2011 Abstract: In the world economic system and increasing competition
Master's Thesis in (Agricultural Economics Engineering) Winter 2013 Abstract: Drought is one of the major problems that Kerman province is facing. And in the last decade, it has gained critical dimensions
Dissertation of Master's Degree in Economic Sciences October 1392 abstract In economic literature, population, both in terms of level and size and in terms of its growth rate, is one of the most important variables.