Download more than 100 examples of thesis, proposal and project topics about tensile strength in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Dissertation for master's degree in civil engineering, structural orientation. Abstract Good bond strength between the old and new concrete surface is a key factor in the performance of concrete repairs. The purpose of this thesis is to investigate and evaluate the bond strength between the surface of the old concrete and the added concrete. In this thesis, a laboratory research ...
Dissertation to receive a general doctorate, abstract, introduction and purpose, among the banding problems in orthodontics, is the creation of decalcified areas around the bands. On the other hand, during the treatment, the bands are prone to loosening and the cement used must have sufficient strength. Recently, new compounds containing amorphous calcium phosphate (ACP) have ...
Master's Thesis in Mechanical Engineering - Applied Design Abstract In recent years, most of the researches have been focused on compressive and combined loading in order to investigate the buckling of nanotube structures, and for this purpose, the work done on tensile loading is very limited. Since the results of compressive and tensile loading in carbon nanotubes are ...
Dissertation for receiving a master's degree in the field of structural oriented civil engineering, 2013, although the construction and design methods of structures have expanded over the years, but still the effect of earthquakes is one of the most important.
Dissertation for obtaining a master's degree in civil engineering, structural orientation, March 2013, abstract of the scope of using FRP materials for shear strengthening of reinforced concrete beams in
Summer 1390 Expertise Master of the field: Civil Engineering Orientation: Structure Abstract: In this thesis, the effect of nanosilica on the mechanical properties and durability of concrete containing polypropylene fibers
Dissertation for Master's Degree in Civil Engineering (M.Sc) Orientation: Structure Winter 2013 Abstract: Resilient construction of important government buildings, infrastructure facilities and vital arteries due to the increase
Master's Thesis in Civil Engineering - Earthquake Engineering March 2012 Abstract Reinforced soil is a special material that is created from the combination of soil and reinforcing member. Arming components resistant to N
Dissertation of Master's Degree in Civil Engineering – Earthquake Engineering 2013 Abstract: Concrete beam and slab bridges with neoprene supports are among the most common highway bridges in the country.
Master's Thesis of Ardakan Faculty of Art and Architecture, Carpet Department (Primary Materials and Dyeing) Mehr 2013 Abstract: During the period of its use, the hand-woven carpet may be affected by various factors and conditions
Dissertation for M.Sc degree in soil and soil mechanics engineering, summer 2013, first chapter, introduction of micro candles 1-1 Micro-candles in general in dealing with problematic soils
Thesis for the M.Sc degree in wood and paper industry engineering, Mehr 2013 Abstract: In this research, the physical and mechanical properties of nanocomposites obtained from cellulose nanofibers and poly polymers
Dissertation for Master's Degree in Civil Engineering - Structures Abstract: One of the important problems in seismic design and implementation of buildings is the significant dead weight used in it. Therefore, in the case of using lightweight concrete that has favorable mechanical properties, significant benefits can be obtained, including a reduction in dead load and ...
Master's Thesis (M.sc) Civil Engineering, Soil and Foundation Mechanics Abstract In this research, the stability of soil reinforced with geogrid located on an underground cavity was analyzed using plaxis software, and the effect of several factors such as the number of geogrid layers, the length of the geogrid layer, the stiffness of the geogrid layer, the optimal location of ...
Master's thesis in the field of civil engineering, structure orientation. Abstract: In this study, the effect of some effective parameters on the strength of polymer concrete based on epoxy resin, including hardener, filler, and solvent, has been investigated. Rice husk ash and broom stalk ash were used as fillers and acetone-toluene mixture with a ratio of 50-50% was used as a ...
The effect of fiber and pozzolanic materials on the mechanical properties of glass fiber reinforced concrete Master's Thesis of Civil-Structural Engineering Abstract The failure and destruction of concrete is highly dependent on the formation of cracks and microcracks. With increasing loading, microcracks are connected and form cracks. In order to solve this problem and also to ...
Master's Thesis of Structures Abstract In the welding process, after a stage of cooling of the body, due to the uneven distribution of temperature, stresses remain in it, which are called residual stresses. To obtain these stresses, the temperature history of the object during the welding process must be available. For this purpose, first a thermal analysis is done to obtain the ...
Dissertation for receiving a master's degree in the field of civil engineering with a focus on soil and foundation. Abstract: The compressibility behavior of soils has become an important concern in geotechnical engineering. As buildings, embankments and roads are implemented, significant settlements often occur. Since long-term settlements occur due to creep, therefore, the ...
Dissertation of Master's Degree in Civil Engineering - Structure Abstract In metal structures, one of the most important places of stress concentration is the joint. In form cutting, the shear force at the connection point is so high that a part of the beam or its reinforcement is broken and separated in pieces, and this is due to negligence in the design of the connection or ...
Dissertation for receiving M.SC Master's degree Major: Water Engineering Abstract: Dams are the largest man-made structures. Their design often stems from their unique nature and the consequence of failure, which is certainly greater than the collapse of other types of structures. The stability of dam body and foundation structures can be analyzed and checked in various ways. ...
Education Level: Master's Degree, Field: Civil Engineering, Major: Structures Abstract: In this thesis, the effect of nanosilica on the mechanical properties and durability of concrete containing polypropylene fibers was investigated. Polypropylene fibers with a length of 18 mm and a ratio of length to diameter of 0.9 mµ were used. The effect of fibers and nanosilica in three ...
Civil Engineering Master's Thesis - Soil and Foundation Mechanics Abstract From the past until now, one of the most economical methods to improve the mechanical properties of clay soils has been stabilization by means of additives such as lime and cement in construction projects such as road construction and consolidation of building foundations. Also, with the passage of time ...
Master's thesis in the field of civil engineering, structure orientation Alkaline Aggregate Reaction [1] (AAR), is a chemical reaction that occurs in some concrete structures. (AAR) is a reaction between alkaline fluids in the pores and silica aggregates. Concrete failure, including expansion and cracking due to the alkaline reaction of aggregates, is of particular importance. ...
Master's thesis in the field of structural civil engineering Abstract: Steel-reinforced concrete is a material that is widely used in civil engineering structures due to reasons such as suitable compressive strength, low cost of preparation and availability of raw materials. But reinforced concrete prepared from cement paste, ordinary aggregates, and steel rebars has weaknesses ...
Master's thesis in the field of chemical engineering (simulation and process control) abstract design of the control system for the fluidized bed reactor for the production of linear light polyethylene of the LLDPE unit of Jam Petrochemical under the license of Basel and Spherilene technology with an annual production capacity of 300,000 tons of product is one of the largest ...
Introduction In today's era, the presence of waste materials resulting from various physical and chemical processes is one of the important problems of industrialized and developing countries. So that extensive research is being carried out for methods of recycling or disposing of them to minimize the damage to the environment. In this regard, construction researchers, like ...
Dissertation for receiving a master's degree in the field of civil engineering, structure orientation. Abstract: Today, many reinforced concrete structures that are in operation are more than 75 years old and have been damaged due to natural disasters such as earthquakes and wind, or due to material fatigue or corrosive factors. Maintenance of structures is very important due to ...
Civil engineering, soil and foundation, abstract, considering that all engineering infrastructures and vital urban and non-urban places and arteries such as: foundations of buildings, bridges, silos, dams, retaining walls, marine structures, industrial facilities, etc. . . All spread on a platform called the earth. The importance of investigating the type of instability in ...
Dissertation for receiving the master's degree ""M.Sc"" orientation: abstract structure In today's reinforced concrete buildings, the use of interframe separators is very common. Intermediate frames with building materials are the main types of separators that are used in this type of buildings. In previous research, these interframe separators are usually considered as ...
A master's thesis in the field of civil engineering - hydraulic structures Abstract Liquid storage air tanks are used not only to store water, but also to store chemicals and toxic substances in different forms. Considering the use of these structures in civil and urban development and industrial networks, their importance is determined before and after the earthquake. The ...
Dissertation for receiving a master's degree in the field of Civil Engineering (M.Sc) Major: Structure Abstract: The retrofitting of important government buildings, infrastructure facilities and vital arteries due to the increase in terrorist attacks around the world and the possibility of bombings near buildings and urban places is one of the most important discussions in the ...
Dissertation for Master's Degree in Physical Education and Sports Science Major: Sports Physiology Abstract The aim of the current research is to compare the relationship between the level of physical fitness and body composition between public and non-profit schools in Rasht. included 600 people, separated by 200 people per
Dissertation to receive master's degree in organic chemistry Keywords: Farsi: Besparash, condensation, composite, nanocomposite, anchoring Nitrogen in bonding with metals can destroy them
Biomechanics Master's Thesis Abstract Nowadays, open heart surgery has become a very common procedure all over the world. For more than half a century, steel wires were used to close the chest. Now the fixation methods have changed dramatically. By examining the common methods of closing the sternum and taking into account the important parameters in the design of these systems, ...
Master's thesis in the field of polymerization engineering, abstract was determined by using experimental design methods to determine the optimal feed recipe for the preparation of nitrile rubber. Initially, to determine the factors affecting the rate of polymerization, screening tests were designed according to the Plate-Boorman method, which examines a large number of factors ...
Master's Thesis of Polymer Science and Technology Engineering Abstract Urethane-acrylate resins are of interest due to their low viscosity and flame retardant properties and relatively easy curing. On the other hand, natural fibers with renewable resources, low price, low density and high special properties have a special ability to be used in composites. However, their ...
Master's Thesis of Polymer Industrial Engineering Abstract Cross-linked polyethylene is one of the materials that is widely used in the field of insulation production in cables due to having suitable electrical properties and good electrical strength. Nowadays, one of the methods of optimizing the properties and changing the behavior of polymers is the use of filler particles ...
Mechanical Engineering Master's Thesis - Applied Design Abstract Today, in various industries such as aerospace, atomic energy, chemical industries, refineries, petrochemical industries, etc., there is a need to use high-pressure mechanisms to enable the completion of relevant processes. The increase in pressure is done inside the cylindrical chambers and as a result, such an ...
Dissertation for Master's Degree in Food Science and Engineering. Abstract Every year, millions of tons of plastic waste, including bags, plastic envelopes, and packaging materials, enter the environment and cause problems to the environmental cycle due to their irreversibility, and as a result, the need for degradable plastics in nature is increasing day by day. Today, the ...
A master's thesis in the field of mechanics, applied design, abstract. These two characteristics are caused by phase transformations under different thermodynamic loadings. Depending on these two mentioned features, memory alloys can be used as actuators in different forms. These structures can be used in different fields such as medicine, aerospace, knowledge
Dissertation for Master's Degree in Rock Mechanics Abstract: Rock mass blasting ability is a very important feature in explosive designs in mines and construction activities, which is closely related to rock mass system, environmental conditions and blasting system. Among the factors affecting the explosiveness, there are controllable ones, and there are some that are ...
Dissertation for Master's Degree in Mining Engineering - Rock Mechanics Abstract Today, blasting operations in hard rock piles is an inevitable thing in many mining and construction projects, and in case of inaccuracy in its design, it can cause great loss of life and money to all construction or mining projects. When an explosion takes place in two different rock masses with ...
Master's Thesis in Mechanical Engineering (Applied Design): Abstract of the analysis of leading damage in pin connections of composite materials. The purpose of this research is to analyze the leading damage in pin connections of composite materials. To do this, finite element software ABAQUS and FORTRAN programming have been used. The contact between the composite plate with ...
Master's thesis in the field of mechanical engineering (applied design trend) Abstract of the study of the deterioration of non-isotropic TWB sheets under the hydroforming process. During the research, four different metals of aluminum alloys 6111-T4, 5083-H18, 5083-O and dual-phase steel DP590 and two spherical tensile tests and simple uniaxial tensile tests were used. Then we ...
Dissertation for receiving a master's degree in the field of entrepreneurship management, 91 Shahrivar Abstract: Researches show that in recent years, the trend towards entrepreneurship and related issues in the country
Abstract of the thesis for obtaining a master's degree in the field of executive management in May 2013, every year a huge amount of the country's national capital is consumed in the form of building construction projects and related industries, it is necessary
Academic Thesis for Master's Degree in Visual Communication Abstract: Today and in this competitive environment, branding for organizations has become a useful method and tool to communicate with customers. This means of communication has strategic advantages in creating continuity (continuous relationships), values ??and differentiation for the company in the long term. Visual ...
Abstract: The increasing growth of the tourism industry in the world and the huge income earned by the countries investing in this field, makes the policy makers of the countries that have potential in this field find this industry attractive and do their best to get a larger share of this growing market. Since Iran is among the top ten countries in the world in terms of tourism ...
Dissertation for Master's Degree Abstract: Dealing with external forces such as earthquakes is one of the most important missions of civil engineers. In order to achieve this goal, the light metal frame system, which has advantages such as the possibility of industrial production, prefabrication and lightness, can be considered as a suitable alternative to traditional systems. ...
Dissertation for Master's Degree in Civil Engineering, Marine Structures, Abstract: Tension-based platforms are among economic marine platforms for use in deep waters. The correct prediction of the platform's dynamic response to environmental loads is very important in its economic and safe design. In this research, the dynamic behavior of the tension base platform under the ...
. Introduction In all recorded historical texts, the ability to generate power has fascinated man. Although modern technology has reduced the need for maximal strength levels for normal daily activities, from a scientific and clinical point of view muscle strength is of particular importance for health [1], optimal sports performance [2] and increased quality of life [3]. The ...
Thesis for obtaining a master's degree in the field of: Physical Education and Sports Sciences, Sports Physiology. Abstract: Resistance training is a method for developing health, general fitness, and developing skeletal muscle strength. The purpose of this study was to investigate the effects of resistance training on body composition and maximum strength of upper body muscles ...
Dissertation (dissertation) to receive a degree... in the field of physical education and sports sciences, specialization in sports physiology. Therefore, the aim of this study was to investigate the effect of endurance, strength and parallel exercises on heart rate, systolic blood pressure, diastolic blood pressure, and PR interval in the workers of Pars Khodro Company. In ...
An academic thesis for receiving a master's degree in the field of physical education in the field of motor behavior, strengthening the factors of muscle function in the developed training stages and maintaining these abilities is considered one of the most important tasks of coaches and athletes when they are not training or are injured. With this aim, the present research ...
Dissertation for receiving a doctorate degree in the field of physical education, sports biomechanics, abstract: Osteoporosis is a skeletal disorder in which the mechanical strength of bones is reduced and leads to bone fractures, so it is important to pay attention to methods to maintain bone strength and prevent osteoporosis. The aim of this research was to determine the ...
Thesis for obtaining a master's degree in the field of: physical training, majoring in sports physiology. The abstract of this research is a semi-experimental research that was conducted with the aim of investigating and comparing the effect of plyometric and strength exercises with weights on the physical fitness factors of the Iranian men's national liver team. The subjects of ...
Dissertation for Master's Degree Abstract The general purpose of this research is to investigate the effect of low-intensity resistance training with restricted blood flow on the serum levels of growth hormone, cortisol, testosterone and IGF-1 in young men. 30 healthy young men with an age range of 19-24 years who volunteered to participate in the study were selected as a ...
Dissertation for receiving a master's degree, specialization: accounting, abstract: most people do not know properly about investment methods, they invest their financial resources and savings in different markets in order to get more profit and maximize their wealth. Some people are looking for less profit and without risk. For this reason, they invest the financial resources ...
Dissertation for M.Sc degree, specialization: manufacturing and production, abstract in this thesis, how to improve the properties of plastics with the help of heat treatment. First, we will talk briefly about polymers, plastics and their sub-branches and heat treatment on them, and then we will discuss the effect of annealing heat treatment on heavy polyethylene sheets that are ...
Thesis for receiving the master's degree “M. A.” Field of Educational Sciences Curriculum Planning Orientation Summer 2019 Abstract The general purpose of this research is to investigate the effect of family education classes on
Master's Thesis in the field of Educational Sciences, Educational Planning, 2013 Abstract The purpose of this research was to determine the feasibility of product-oriented skill training in the country, which seeks to answer three questions:
Dissertation for Master's Degree in Educational Psychology Spring 2019 Abstract Concept map is one of the teaching-learning strategies that can facilitate meaningful learning in students and relationships
Thesis of master's degree in seafaring, sea transport orientation (case study of Bandar Shahid Rajaei container terminal), February 2019, abstract in this research, the future scenarios of Bandar Shahid container traffic
Dissertation for Master's Degree (M.A. Public Management, Financial Orientation, Winter 2019) Summary of the present research with the aim of ""investigating the significant difference in the country's budget stages before and after the establishment of
Thesis for receiving the master's degree “M. A.” Field of Educational Sciences, Curriculum Planning, Year 1993, Effectiveness of Family Education on Maternal Educational Perspective
Doctoral Dissertation in Civil Engineering - Summer 2013 Earthquake Abstract One of the appropriate tools to know the condition of the network As one of the vital artery systems, water distribution is an indicator of reliability. one hand
Master's Thesis in Civil Engineering - Earthquake Engineering 1391 Abstract Structures with frames with coaxial braces are among earthquake resistant systems. These structures are widely
Master's Thesis in the field of Industrial Management - Production Management in Bahman 2013 Abstract Home business has received attention in recent years in our country. These businesses have advantages
Department of Industrial Management Winter 2019 Abstract: The current research is about the mutual effect of supply chain management and customer relationship management in Esfrain Steel Company. In order to answer the research questions
Thesis of master's degree in business management, marketing orientation, summer 1991. Abstract: This research with the subject of "" Investigating the effect of social marketing factors on the value of the bank's brand name from the customers' point of view (Study
Master's Thesis in Philosophy of Education and Training May 2014 Abstract: The purpose of this research is to investigate the importance and position of Challenging and neglected Spiritual education And then
Master's Thesis in Educational Management (M.A.) Academic Year 2012-1393 Abstract The subject of the current research is to examine the relationship between the organizational excellence model (EFQM) and the performance of education
Thesis for obtaining a master's degree in the field of educational management in the summer of 2013 Abstract: The present study was conducted with the aim of investigating the relationship between the use of information technology and the satisfaction of students of the Faculty of Agriculture, Urmia University.
Abstract: The purpose of this research was to compare metacognitive skills of male and female high school students in district 3 of Shiraz. The descriptive research method is a survey method. The statistical population of the study includes all
Dissertation for the degree of ""M.A."" Field: Educational Management Abstract of the present research with the aim of knowing and analyzing Investigating the relationship between trust in management and job satisfaction of teachers in water schools
Master's degree thesis of Master's degree: MBA Winter 90 Abstract: Agility means the ability of any organization to anticipate changes in the work environment. Such an organization with
Thesis of Master's Degree in Business Management for the year 2010-2011 The first chapter
endname? Rasht Master's Degree: Civil Engineering (M.S.C.) Focus: Hydraulic Structures Academic Year 2011-2012 Summary of the Minab River, the most important river of Khan? The fresh water is in Hormozgan province. this river
Dissertation of master's degree in civil engineering, structural orientation, October 1390, first chapter of generalities. 1-1 Introduction In recent years, there have been many advances in the field
Dissertation for obtaining a master's degree in civil engineering – Spring 2014 structure trend, first chapter, general research 1-1- Introduction: Mostly structures for severe earthquakes and surface acceptance