Download more than 100 examples of thesis, proposal and project topics about tensile loading in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Master's Thesis in Mechanical Engineering - Applied Design Abstract In recent years, most of the researches have been focused on compressive and combined loading in order to investigate the buckling of nanotube structures, and for this purpose, the work done on tensile loading is very limited. Since the results of compressive and tensile loading in carbon nanotubes are ...
Dissertation for Master's Degree in Civil Engineering, Marine Structures, Abstract: Tension-based platforms are among economic marine platforms for use in deep waters. The correct prediction of the platform's dynamic response to environmental loads is very important in its economic and safe design. In this research, the dynamic behavior of the tension base platform under the ...
Civil Engineering Master's Thesis - Soil and Foundation Mechanics Abstract From the past until now, one of the most economical methods to improve the mechanical properties of clay soils has been stabilization by means of additives such as lime and cement in construction projects such as road construction and consolidation of building foundations. Also, with the passage of time ...
Master's Thesis in Mechanical Engineering - Applied Design Abstract of elastoplastic analysis of thick-walled tanks made of targeted materials with linear kinematic stiffness behavior under cyclic loading, stress analysis and deformation of spherical thick-walled tanks made of subject materials under internal pressure loading and temperature difference are discussed in this ...
Dissertation for receiving a master's degree in the field of structural oriented civil engineering, 2013, although the construction and design methods of structures have expanded over the years, but still the effect of earthquakes is one of the most important.
Dissertation for Master's Degree in Civil Engineering (M.Sc) Orientation: Structure Winter 2013 Abstract: Resilient construction of important government buildings, infrastructure facilities and vital arteries due to the increase
Master's Thesis in Civil Engineering - Earthquake Engineering March 2012 Abstract Reinforced soil is a special material that is created from the combination of soil and reinforcing member. Arming components resistant to N
Master's Thesis of Ardakan Faculty of Art and Architecture, Carpet Department (Primary Materials and Dyeing) Mehr 2013 Abstract: During the period of its use, the hand-woven carpet may be affected by various factors and conditions
Master's Thesis (M.sc) Civil Engineering, Soil and Foundation Mechanics Abstract In this research, the stability of soil reinforced with geogrid located on an underground cavity was analyzed using plaxis software, and the effect of several factors such as the number of geogrid layers, the length of the geogrid layer, the stiffness of the geogrid layer, the optimal location of ...
Master's Thesis in Civil Engineering - Roads and Transportation) Overview Pavements are usually affected by various factors that affect their life. Since a road passes through different areas where the subsoil, the type and volume of traffic and the climatic conditions of these areas are different from each other, therefore, various disadvantages and defects arise in different ...
The effect of fiber and pozzolanic materials on the mechanical properties of glass fiber reinforced concrete Master's Thesis of Civil-Structural Engineering Abstract The failure and destruction of concrete is highly dependent on the formation of cracks and microcracks. With increasing loading, microcracks are connected and form cracks. In order to solve this problem and also to ...
Master's Thesis of Structures Abstract In the welding process, after a stage of cooling of the body, due to the uneven distribution of temperature, stresses remain in it, which are called residual stresses. To obtain these stresses, the temperature history of the object during the welding process must be available. For this purpose, first a thermal analysis is done to obtain the ...
Dissertation for receiving a master's degree in the field of civil engineering with a focus on soil and foundation. Abstract: The compressibility behavior of soils has become an important concern in geotechnical engineering. As buildings, embankments and roads are implemented, significant settlements often occur. Since long-term settlements occur due to creep, therefore, the ...
Dissertation of Master's Degree in Civil Engineering - Structure Abstract In metal structures, one of the most important places of stress concentration is the joint. In form cutting, the shear force at the connection point is so high that a part of the beam or its reinforcement is broken and separated in pieces, and this is due to negligence in the design of the connection or ...
Dissertation for receiving M.SC Master's degree Major: Water Engineering Abstract: Dams are the largest man-made structures. Their design often stems from their unique nature and the consequence of failure, which is certainly greater than the collapse of other types of structures. The stability of dam body and foundation structures can be analyzed and checked in various ways. ...
Master's thesis in the field of civil engineering, structure orientation Alkaline Aggregate Reaction [1] (AAR), is a chemical reaction that occurs in some concrete structures. (AAR) is a reaction between alkaline fluids in the pores and silica aggregates. Concrete failure, including expansion and cracking due to the alkaline reaction of aggregates, is of particular importance. ...
Master's thesis in the field of structural civil engineering Abstract: Steel-reinforced concrete is a material that is widely used in civil engineering structures due to reasons such as suitable compressive strength, low cost of preparation and availability of raw materials. But reinforced concrete prepared from cement paste, ordinary aggregates, and steel rebars has weaknesses ...
Introduction In today's era, the presence of waste materials resulting from various physical and chemical processes is one of the important problems of industrialized and developing countries. So that extensive research is being carried out for methods of recycling or disposing of them to minimize the damage to the environment. In this regard, construction researchers, like ...
Dissertation for receiving a master's degree in the field of civil engineering, structure orientation. Abstract: Today, many reinforced concrete structures that are in operation are more than 75 years old and have been damaged due to natural disasters such as earthquakes and wind, or due to material fatigue or corrosive factors. Maintenance of structures is very important due to ...
Civil engineering, soil and foundation, abstract, considering that all engineering infrastructures and vital urban and non-urban places and arteries such as: foundations of buildings, bridges, silos, dams, retaining walls, marine structures, industrial facilities, etc. . . All spread on a platform called the earth. The importance of investigating the type of instability in ...
Dissertation for receiving the master's degree ""M.Sc"" orientation: abstract structure In today's reinforced concrete buildings, the use of interframe separators is very common. Intermediate frames with building materials are the main types of separators that are used in this type of buildings. In previous research, these interframe separators are usually considered as ...
Dissertation for receiving a master's degree in the field of Civil Engineering (M.Sc) Major: Structure Abstract: The retrofitting of important government buildings, infrastructure facilities and vital arteries due to the increase in terrorist attacks around the world and the possibility of bombings near buildings and urban places is one of the most important discussions in the ...
Biomechanics Master's Thesis Abstract Nowadays, open heart surgery has become a very common procedure all over the world. For more than half a century, steel wires were used to close the chest. Now the fixation methods have changed dramatically. By examining the common methods of closing the sternum and taking into account the important parameters in the design of these systems, ...
Mechanical Engineering Master's Thesis - Applied Design Abstract Today, in various industries such as aerospace, atomic energy, chemical industries, refineries, petrochemical industries, etc., there is a need to use high-pressure mechanisms to enable the completion of relevant processes. The increase in pressure is done inside the cylindrical chambers and as a result, such an ...
A master's thesis in the field of mechanics, applied design, abstract. These two characteristics are caused by phase transformations under different thermodynamic loadings. Depending on these two mentioned features, memory alloys can be used as actuators in different forms. These structures can be used in different fields such as medicine, aerospace, knowledge
Dissertation for Master's Degree in Rock Mechanics Abstract: Rock mass blasting ability is a very important feature in explosive designs in mines and construction activities, which is closely related to rock mass system, environmental conditions and blasting system. Among the factors affecting the explosiveness, there are controllable ones, and there are some that are ...
Master's thesis in the field of mechanical engineering (applied design trend) Abstract of the study of the deterioration of non-isotropic TWB sheets under the hydroforming process. During the research, four different metals of aluminum alloys 6111-T4, 5083-H18, 5083-O and dual-phase steel DP590 and two spherical tensile tests and simple uniaxial tensile tests were used. Then we ...
Dissertation for master's degree in mechanical engineering, construction and production trend. Abstract One of the important topics in the field of welding in engineering structures is the discussion of reducing residual stresses in welding lines and improving the quality of welding. Residual stresses reduce the load bearing limit, the life of welded joints and change the forms ...
Dissertation for receiving the degree of Doctor of Dentistry Abstract The long-term clinical success of implants is dependent on osseointegration and adhesion of soft tissues and epithelium to implant surfaces. Various indices including: plaque index, gingival index, bleeding during probing and bone resorption are used to evaluate the health of the soft tissues around the ...
Master's Thesis of Mechanical Engineering-Applied Design Abstract In many applications, graphene (monolayer or multilayer) is used in the polymer matrix as a composite. In this research, ideal graphene with a hexagonal bond shape between atoms, located in a polymer matrix, with different boundary conditions, including gripped and simple, under biaxial external compressive ...
A master's thesis in the field of electrical-power engineering. Time series load distribution. In this research, the application of time series models in the power system is discussed. Time series are used to model different power grid parameters and in various applications. These models are able to consider the time correlation of power grid variables. According to the modeling ...
Master's Thesis in Civil Engineering - Earthquake Engineering 1391 Abstract Structures with frames with coaxial braces are among earthquake resistant systems. These structures are widely
Dissertation for obtaining a master's degree in civil engineering, structural orientation, March 2013, abstract of the scope of using FRP materials for shear strengthening of reinforced concrete beams in
Thesis of master's degree in civil engineering, soil and foundation mechanics orientation, September 2019, abstract: analysis of dynamic interaction between soil and structure (due to the mutual effect of the structure and its retaining soil on each other), D
Summer 1390 Expertise Master of the field: Civil Engineering Orientation: Structure Abstract: In this thesis, the effect of nanosilica on the mechanical properties and durability of concrete containing polypropylene fibers
Dissertation of master's degree in civil engineering, structural orientation, October 1390, first chapter of generalities. 1-1 Introduction In recent years, there have been many advances in the field
Dissertation of master's degree in structural engineering, February 2011 Abstract: In the optimal civil engineering structure construction for static loadings have been significantly developed. But, in
Thesis for receiving the degree of M.Sc. Trend: soil and soil in February 2013 Abstract: Allowed load capacity or safe load capacity is a virtual pressure that is within the range of
Dissertation of Master's Degree in Civil Engineering – Earthquake Engineering 2013 Abstract: Concrete beam and slab bridges with neoprene supports are among the most common highway bridges in the country.
Doctoral dissertation in civil engineering – Earthquake Engineering 2013 Abstract The inappropriate performance of columns in concrete buildings designed and built in the past years causes concern and attention to the amount of A
Dissertation for master's degree in civil-structural field winter 2012 Abstract In recent years, the number of buildings that have suffered damage due to the loss of their gravity-bearing members has increased. Therefore, it has become important to design structures so that they are resistant to progressive damage in addition to the effects of earthquakes. One of the factors ...
Dissertation for M.Sc degree in soil and soil mechanics engineering, summer 2013, first chapter, introduction of micro candles 1-1 Micro-candles in general in dealing with problematic soils
Master's Thesis in Civil Engineering - Structural Orientation, February 2013 Abstract: The performance of a building during an earthquake depends on many factors, as a result, predicting the seismic performance of structures should be considered either explicitly or implicitly as part of the design or evaluation. Predicting the seismic response of the structure is very ...
Thesis for the M.Sc degree in wood and paper industry engineering, Mehr 2013 Abstract: In this research, the physical and mechanical properties of nanocomposites obtained from cellulose nanofibers and poly polymers
Dissertation for M.Sc. Natural Geography-Climate Chapter 1 General Research Introduction Tourism is one of the largest industries in the world, which has a fast growth. For many areas, tourism is the most important source of income, and for other areas, the economic return from tourism is very high (Masoompour, Khosh-Akhlaq). According to the forecast of the World Tourism ...
Master's Thesis in Social Communication Sciences Abstract In today's era, when information-based communication has penetrated geographical boundaries and has marked tremendous changes in the global arena, the media as a useful tool can help the people of the 21st century to achieve a desired, ideal and fruitful life by using the latest scientific achievements; In addition, if ...
In order to receive a master's degree in the field of cognitive psychology, the aim of this study was to study the arousal, pleasantness and dominance of the words used in the common titles of Persian language websites inside and outside the country and to determine its relationship with the arousal, pleasantness and dominance of the whole news headline and to evaluate domestic ...
Master's Thesis in Advertising and Cultural Communication Abstract The present research has studied the relationship between the use of social networks and the religious identity of users with the aim of knowing the relationship between the individual characteristics of users and political and social factors with their religious identity and in order to answer the basic question ...
Department of Geography, Political Geography Dissertation for Master's Degree (M.A.) Abstract Today, due to the change in the approach of countries from a military approach to an economic approach in global competitions to achieve political goals and gain power, expanding foreign trade, creating regional and extra-regional economic unions, and attracting more markets in the ...
Dissertation for Master's Degree in Psychology (M.A.) Clinical Orientation Abstract: Problem Statement: Identifying personality factors and drug addiction helps to diagnose and treat addiction as best as possible, and by providing counseling and psychological services on time, the addiction of susceptible people can be prevented to some extent. Therefore, the purpose of this ...
Dissertation to receive a master's degree (M.A) in natural geography, specialization: climatology in environmental planning, abstract: natural disasters have been the most important cause of human concern at all times. Landslides are one of the most important natural disasters that cause financial and human losses every year, which creates problems in the implementation of ...
Dissertation for obtaining a master's degree in electrical engineering, electronics, abstract, accurate measurement and control of temperature in industrial and research systems is of particular importance, and the correct operation of some industrial and laboratory tools is possible only in a certain location with a small number of channels (maximum 8 channels). Therefore, the ...
Dissertation for Master's Degree in Physical Education, Sports Physiology, Introduction Today, there is fierce competition between athletes in different countries to win championship titles in the Olympic, World and Continental Games, and the effort to improve the performance of athletes has made sports scientists to work more in this field and has increased research in sports ...
Dissertation for M.A. degree Abstract: In this article, the effective factors in empowering the employees of the General Directorate of Technical and Vocational Education of Tehran province have been examined. The main question of the research is whether the factors (feeling of meaning, feeling of being effective, feeling of choice, feeling of competence, feeling of trust) are ...
Dissertation to receive a master's degree > Dissertation: Fault tolerance software is one of the prominent and important features of today's information systems. Among the various methods of improving fault tolerance, the software method is more complicated than other methods. Here, considering that our target system is business intelligence systems, which play a significant ...
Dissertation for Master's Degree ""MSC"" Field: Computer, Orientation: Software Abstract One of the most important issues in the supply chain today, and extensive studies have been conducted in its field, is the routing of freight vehicles to deliver goods to applicants. To solve this problem, the objective function should be optimized in such a way that criteria such as the ...
Dissertation for Master's Degree in Civil Engineering - Structures Abstract: One of the important problems in seismic design and implementation of buildings is the significant dead weight used in it. Therefore, in the case of using lightweight concrete that has favorable mechanical properties, significant benefits can be obtained, including a reduction in dead load and ...
In order to obtain a master's degree in the field of civil engineering - soil and foundation orientation, Abstract Nowadays, circular foundations are more or less used for structures, especially structures that have axial symmetry. In this research, a numerical study was conducted on bearing capacity and settlement of annular foundation. PLAXIS software was used for modeling. ...
Master's Thesis in Civil-Structural Engineering Abstract In order to estimate the capacity of buildings, it will be much easier and less expensive to use static methods instead of incremental dynamic methods. Although the incremental dynamic method gives more accurate and closer answers to the real behavior of the structure, its high cost and time has increased the desire to use ...
Master's thesis in the field of civil engineering, structure orientation. Abstract: In this study, the effect of some effective parameters on the strength of polymer concrete based on epoxy resin, including hardener, filler, and solvent, has been investigated. Rice husk ash and broom stalk ash were used as fillers and acetone-toluene mixture with a ratio of 50-50% was used as a ...
Master's thesis in the field of civil engineering, structural orientation. Abstract: Investigating the effect of span length on bridge behavior under the simultaneous effect of horizontal and vertical components. Among all types of structures, bridges are one of the pillars of vital arteries that need to be used after an earthquake to provide access to hospitals, fire stations, ...
Master's thesis in the field of civil engineering, structural orientation. Abstract In this study, the evaluation and comparison of nonlinear and numerical analysis of deep reinforced concrete beams with openings without reinforcement with deep concrete beams with openings reinforced with FRP sheets and deep reinforced concrete beams without openings by Abaqus finite element ...
Dissertation for Master's Degree Abstract: Dealing with external forces such as earthquakes is one of the most important missions of civil engineers. In order to achieve this goal, the light metal frame system, which has advantages such as the possibility of industrial production, prefabrication and lightness, can be considered as a suitable alternative to traditional systems. ...
Dissertation for Master's Degree (M.A) Field: Industrial Management-Production Abstract In the current situation due to the increase in fuel prices, transportation fares increase, and then the prices of production and service products also increase, which causes inflation in the society, and transportation fares and inflation are dependent on fuel prices. In the current ...
Dissertation for master's degree in the field of civil engineering, road and transportation, the abstract of asphalt failures is one of the problems that are the concern of road and transportation engineers today, and every year huge costs are spent on the maintenance and repair of asphalt roads. Many efforts have been made to increase the strength and life of asphalt, among ...
Dissertation for Master's Degree in Civil-Structural Engineering Abstract In our country, most of the structures and maybe all the conventional buildings are analyzed and designed independently, which means that these structures are mainly analyzed and designed by conventional software and considering a rigid or articulated support, and then the forces obtained at the base of ...
Master's Thesis in Civil-Soil Field Abstract Dense clay layers are used as one of the most common impermeable layers in most geotechnical structures such as earthen dams and municipal and radioactive waste disposal centers. Due to special geotechnical characteristics, these layers are damaged by cracking during their lifetime, these cracks increase the permeability of the layer ...
Master's thesis (M.sc) Abstract: Nowadays, spam [1] is one of the main problems of search engines, because they make the quality of search results unfavorable. In recent years, there have been many advances in detecting fake pages, but new spamming techniques have also emerged in response. It is necessary to improve anti-spam techniques to overcome these attacks. A common ...
Master's thesis in the field of civil engineering, soil and foundation, today, due to the progress of the tunneling industry, the need to analyze and design underground structures in rocky environments is felt more than in the past. Although there are many numerical and practical software available in this field, none of them are complete and perfect in all fields, and each of ...
Dissertation for Master's Degree in Civil Engineering, Structures, Abstract: This thesis is the results of a numerical and parametric study on the effect of reinforcing reinforced concrete shear wall with FRP composite and applying the results of the finite element method. The finite element program is compared and calibrated against experimental data. Then, the numerical ...
Dissertation for Master's Degree in Civil Engineering with Earthquake Orientation Abstract: Semi-rigid joints [1] are joints whose hardness is between the two states of grip and joint and transmit a part of the anchor, in other words, its degree of rigidity is between 20% and 90%. In this thesis
Master's Thesis in Civil Engineering-Earthquake Abstract Using braces as a lateral resistance system in steel structures is one of the most common methods to withstand the forces caused by earthquakes. One of the weak points of this system is the compression resistance of the bracing member and its buckling as a result of reducing the member's load. Today, this problem has been ...
Dissertation for Master's degree (M.S) Chapter 1 History of dynamic analysis of liquid storage tanks and regulatory orders in this regard Abstract The main goal of this research is to investigate the effect of the presence of seismic isolators on the dynamic performance of liquid storage tanks during an earthquake. In this regard, it is necessary to first know the dynamic ...
Master's Thesis in Civil Engineering, Earthquake Orientation Abstract: Bridge structures are affected by various loads and are designed according to the level of risk that is considered for them. Explosive loading is one of the loads that threaten the health of bridges. It is necessary to evaluate the amount of damage and performance of bridges under the effect of this loading ...
Dissertation for receiving a master's degree in the field of: Power Electricity, the increase in the presence of non-linear power electronic loads in distribution networks, on the one hand, and the ongoing changes in distribution networks, such as the presence of scattered production sources and the possibility of forming power microgrids [1], have increased the need for new ...
Dissertation for master's degree in civil engineering, structural orientation. Abstract Good bond strength between the old and new concrete surface is a key factor in the performance of concrete repairs. The purpose of this thesis is to investigate and evaluate the bond strength between the surface of the old concrete and the added concrete. In this thesis, a laboratory research ...
M.SC Master's Thesis in Civil Engineering, specialization: hydraulic structures. Abstract Due to its special geographical location, Bandar Lange has been operating as a cargo and passenger transit station since the distant past. During the past years, this activity has raised expectations from it, so that its development plan has been implemented. Foresight in the development of ...
. Introduction In all recorded historical texts, the ability to generate power has fascinated man. Although modern technology has reduced the need for maximal strength levels for normal daily activities, from a scientific and clinical point of view muscle strength is of particular importance for health [1], optimal sports performance [2] and increased quality of life [3]. The ...
Master's thesis in the field of civil engineering, soil and foundation, in this research, the bearing capacity of the conical pile group and the cylindrical pile group with the same volume are calculated and compared. Due to the lack of numerical studies and modeling by software for conical piles compared to laboratory tests in this field, in this research, the modeling of the ...
Abstract Underground facilities are an integral part of modern society and are used for many applications, including subways and railway lines, highways, material storage and water and sewage transportation. is used Underground facilities built in areas affected by earthquake activity must withstand both earthquake and static loading. By reviewing the historical cases of ...