Download more than 100 examples of thesis, proposal and project topics about temperature separation in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Master's thesis in the field of chemical nanoengineering Abstract: Fabrication of ceramic nanofiltration membrane for chloride ion separation (case study: gas condensate) In this research, chloride ion separation using alumina-titania double layer nanofiltration membrane has been investigated. For this purpose, first, the alumina-titania double-layer membrane is made based on ...
Dissertation for Master's degree (M.Sc) orientation: energy conversion. Abstract In this research, a study on irreversible absorption refrigeration systems based on internal and external irreversibility is presented with regard to the limited thermal capacities of external tanks. To optimize the system, three scenarios were defined, in which objective functions such as ...
Academic thesis for obtaining a master's degree in the field: Natural Geography, specialization: Geomorphology in environmental planning. Abstract: Basically, the settlement and creation of an area depends on environmental conditions and geographical location more than anything, because natural complications and phenomena have a decisive effect on location, dispersion, influence ...
Master's thesis in the field of chemical engineering Kidney stones are one of the most common diseases in the world, most of its crystals consist of calcium oxalate crystals. Therefore, it has been a long time that the investigation of effective substances in controlling this disease through the control of calcium oxalate crystals has been considered. The purpose of this ...
Abstract The main task of the synchronous generator excitation system is to provide the necessary voltage for the generator excitation winding. The excitation voltage is a dc voltage and it is used to create a flux in the excitation winding of the generator and consequently to produce a magnetic field to produce electrical energy by a synchronous generator. In the provided ...
Dissertation for receiving a Master's degree (M.Sc.) specialization: Environment Abstract Gaseous liquids obtained from the refining of sour gases are also sour and contain a large percentage of hydrogen sulfide and mercaptans. Therefore, after distilling and preparing the products, it needs refining processes to remove or reduce the amount of sulfur and mercaptans present. ...
Dissertation for obtaining a master's degree in chemistry, fluoride has been known as a toxic ion for many years. The main source of fluoride in aqueous solutions is minerals containing fluoride and the industrial activities of factories. According to the report of the Environmental Protection Organization, the amount of fluoride more than 1 mg/liter causes various diseases. In ...
Master's Thesis in Chemical Engineering, Process Design, Abstract: In this thesis, a method for thermodynamic analysis and evaluation of energy consumption of distillation tower by using side cooling is introduced. The research done in the past was aimed at the distribution of the heat diagram and checking the possibility of adding or extracting heat from all the different parts ...
Master's Thesis in Nano Chemical Engineering Abstract The aim of this study is to separate cationic polyacrylamide from the waste water of Prodeh Tabas coal washing plant using the polymer membrane filtration process. The primary membrane was prepared using polyacrylonitrile (PAN) by phase inversion process, and then they were prepared using hydrolysis as chemical modification ...
M.Sc. Dissertation for Master Degree in Chemical Engineering - Process Engineering Abstract Mercaptans are removed from hydrocarbon streams by various methods. The use of caustic soda solution and mucoli sieve beds are among the most widely used methods. In the oil and gas industries of our country, washing with relatively dilute caustic solution is often used to remove light ...
Abstract Gas hydrates are a group of solid host compounds that play an important role in many processes such as gas storage, transfer and separation, heterogeneous catalysis and water purification. These crystals are formed at a temperature higher than the freezing point of water and high pressure. There are different methods to calculate the free energy difference: 1) ...
Doctoral thesis in the field of chemical engineering abstract theoretical and experimental investigation of the continuous process of desalination of heavy crude oil using microwaves and ultrasonic waves Desalination of crude oil is the first step in oil refining, by which the undesirable compounds with the oil are separated before they reach the main unit. In order to reduce ...
Master's Thesis in Chemical Engineering (Gas Orientation) Abstract Laboratory Investigation of Gas Dehumidification Using Triethylene Glycol Solution in Hollow Fiber Membrane Contactors In this study, two hollow fiber membrane contactors with different types of Polyvinylidene Fluoride (PVDF) and Polypropylene (PP) fibers have been used for gas dehumidification by Triethylene ...
Master's thesis in the field of chemical engineering, abstract of the design of the Driso ring base and the use of hydrocarbon solvent in the dehumidification process in Farashband refinery, water vapor is one of the most important impurities in the flow of natural gas. Usually, the water vapor itself is not a problem, but instead the liquid or solid phase that forms when the ...
Master's Thesis (M.Sc.) Direction: Process Design Abstract Currently, membranes have found a special place in different separation industries and have wide applications in different fields of separation, including liquid solutions and different gases. Membrane technology is one of the most widely used technologies in today's industry, whose field of application is wide ranging ...
Master's thesis in the field: Chemical Engineering Abstract In this research, a comprehensive two-dimensional model based on the Finite Element Method (FEM) is proposed for modeling gas-solvent membrane contactors to remove carbon dioxide[1] from synthesis gas. Aqueous solution of monoethanolamine has been used as absorbent solvent stream and CO2/N2 gas mixture as gas stream. ...
Dissertation for Ph.D. Ph.D. Persian Summary Aripiprazole is an atypical antipsychotic drug that shows its therapeutic effect with a combination of antagonistic activity of 5-HT2A receptor and partial agonistic activity of 5-HT1A and D2 dopamine receptors. This drug is used in the treatment of schizophrenia, type I bipolar disorders and as an adjunctive treatment in major ...
A master's thesis in the field of chemical engineering, abstract of the laboratory study and modeling of calcium carbonate production from calcium chloride solution by absorbing carbon dioxide from industrial exhaust gases, by the efforts of Amin Alamdari, the effect of carbon dioxide concentration on the precipitation of calcium carbonate species and the kinetics of calcium ...
Dissertation for M.S.c Master's Degree Orientation: Applied Abstract: In recent years, semi-conducting nanoparticles have attracted a lot of attention due to their electrical and mechanical properties, which result from limited quantum effects compared to their counterpart materials. Among semiconductor nanoparticles, ZnO nanoparticles have higher efficiency. To achieve higher ...
Master's Thesis in Chemical Engineering Abstract of Electrochemical Analysis of Formaldehyde Formaldehyde is one of the organic chemicals that is widely used as a raw material in many industries. Industrial effluents that contain high concentrations of formaldehyde must be treated before entering the environment due to its possible carcinogenic and mutagenic risks. The purpose ...
Master's thesis in the field of chemistry, Analytical Chemistry, Abstract In this project, a molecular template polymer was prepared for the selective extraction of phenylmercury chloride. To prepare this polymer, methacrylic acid (active monomer), ethylene glycol dimethacrylate (cross-linking agent), 2,2-azobisisobutyronitrile (initiator), phenylmercury chloride (target ...
Dissertation for Master's Degree in Organic Chemistry. Summary of the research done in this thesis consists of two parts, the first part is the synthesis of the precursor of 4,5-dihydropyrrolo[1,2,3-hi]indole-1,2-dione (compound 1) and one-pot, three-component synthesis of new derivatives of spiro terecates in water-green solvent and in the presence of HMTA catalyst. The second ...
Dissertation for obtaining a master's degree in the field of chemical nanoengineering Abstract In the uranium enrichment unit by centrifuge, UF6 gas after passing through the centrifuge and performing the enrichment process, enters the cold trap and is solidified and collected at a low temperature. One of the absorbents used to absorb uranium hexafluoride is sodium fluoride. The ...
Master's Thesis in Chemical Engineering (Process Simulation and Control) Abstract Modeling and Simulation of the Electrostatic Desalination Process of Crude Oil by Elham Ariafard The aim of this research is to model the desalination process of crude oil based on the population balance method. For this purpose, the one- and two-stage electrostatic desalination process, which ...
Master's thesis in the field of chemical nanoengineering, abstract modeling of chloride ion removal from gas condensate using nanofiltration of chloride ion in gas condensate can cause severe corrosion of equipment and pipes. Therefore, it is necessary to remove it from the condensate flow. The aim of this work is the mathematical modeling of the nanofiltration process for the ...
Master's thesis in the field of chemical engineering without major. Abstract: Modeling, simulation and optimization of Jam Petrochemical Check Bed Reactor for hydrogenation of 1 and 3-butadiene. Therefore, a suitable kinetic model has been selected as a basic structure for modeling the reactor, and after that the presented model has been developed in order to match the molar ...
Master's Thesis on Simulation and Process Design Abstract So far, many methods have been presented to remove phenol from wastewater, among them, the membrane bioreactor process has received attention in the last decade. The use of hollow fiber membrane contactor in this process is to avoid direct contact between two phases and increase the surface-to-volume ratio. In the current ...
Master's thesis in the field of chemistry, Analytical Chemistry, Abstract In this project, a molecular template polymer was prepared for the selective extraction of furan. To prepare this polymer, methacrylic acid (functional monomer), ethylene glycol dimethacrylate (cross-linking agent), 2,2-azobisisobutyronitrile (initiator), a mixture of pyrrole (furan substitute or target ...
Master's Thesis of Chemical Engineering-Biotechnology Abstract Lipase is a carboxylic ester hydrolase enzyme that acts on triacylglycerol to release fatty acids, glycerides and glycerol. The discovery of the ability of lipase to catalyze the esterification reaction started a broad chapter in the field of this enzyme's functions. In this study, with the knowledge of the ability ...
Master's thesis in the field of chemical engineering, abstract of the effect of additives on crystal morphology in the crystallization process of calcium oxalate. Kidney stones are one of the most common diseases in the world, and most of its crystals are composed of calcium oxalate crystals. Therefore, it has been a long time that the investigation of effective substances in ...
Dissertation for Master's Degree in Advanced Chemical Engineering Abstract A new method based on point cloud extraction to extract uranium from water samples and its measurement using alpha spectrometry based on liquid scintillation has been investigated. Uranium extraction from water samples in the presence of a number of available surfactants and chelating reagents has been ...
Petroleum Engineering Master's Thesis Abstract Phosphoric acid is the second most consumed mineral acid in the world and is used as a raw material in the production of detergents, food and pharmaceutical products. In this sense, the purification of phosphoric acid is one of the essential needs of consuming industries. 95% of acid consumed in industries that need pure phosphoric ...
Master's Thesis, Energy Conversion, Abstract: In this project, we will numerically investigate a stable gas flow in a microchannel with a rectangular cross-section. The flow with a certain temperature enters the channel with a constant temperature wall. Momentum and energy equations are discretized and solved numerically. Discretization has been done by FVM method and ...
Master's Thesis of Polymer Industry Engineering Abstract Phenolic resins have excellent dimensional, thermal, chemical and corrosion resistance. Also, the fugitives produced during the thermal degradation of this resin have low toxicity and, in addition, they have high charring. Phenolic resins, due to having desirable properties, are used in many fields such as internal parts ...
The thesis of the Master's course in manufacturing and production, the abstract of this research, with an emphasis on the Traceable Resource Unit (TRU), information management and information exchange technology from livestock farming to the consumer's table, examines the concept of electronic traceability of food throughout the supply chain. To fulfill this responsibility, UML ...
Master's degree in electrical engineering, control orientation, electrical engineering, control orientation, abstract. Today, chemistry and oil and gas extraction and refining is one of the most important economic and productive support points of countries. One of the most common processes in refineries is the separation of chemicals. This is done using separator towers. The ...
Dissertation for M.Sc. in Food Engineering, Agricultural Orientation Abstract The focus of recent research has been photochemical substances derived from plants, which are due to their positive effects on human health. During processing in factories, food can be enriched with active compounds such as phenolic compounds that have benefits and physiological properties such as ...
Dissertation for Master's Degree Abstract Achieving higher rates of heat transfer using different techniques that can result in saving a significant amount of energy and also lead to the production of more compact and cheaper devices with higher thermal efficiency has attracted the attention of researchers. Vortex generation is one of the best methods used to increase heat ...
Effects of hormones and explants on calligenesis, regeneration and cell suspension culture in fennel (Foeniuculum vulgare) Introduction: Fennel (Foeniuculum vulgare) is a herbaceous, stable, aromatic plant from the family of Chetrian, which is used for food and medicine in different regions of Iran. Considering the importance of the compounds of this plant in the pharmaceutical ...
Dissertation for Master's Degree (M.Sc.) Investigating the application of artificial neural network method in estimating the annual runoff of watersheds (Case study: Total Watershed, Fars Province) by: Jalal Zarei Abstract: The importance and place of water in human life, especially in the modern and overpopulated world, is not hidden from anyone, and industrial and urban life ...
Master's Thesis in Mechanical Engineering - Applied Design Abstract of elastoplastic analysis of thick-walled tanks made of targeted materials with linear kinematic stiffness behavior under cyclic loading, stress analysis and deformation of spherical thick-walled tanks made of subject materials under internal pressure loading and temperature difference are discussed in this ...
Master's thesis in the field of mechanics, specialization: mechanical engineering - energy conversion. Abstract: One of the most important components of fluid transmission systems are control valves, which can be seen in different routes of oil and gas transmission pipelines, etc. In control valves, the most important issue is the property of the flow in order to achieve the ...
Master's Thesis in Energy Systems Abstract Crude oil distillation unit is one of the most important and critical operational units of any refinery. This unit often requires revision in the design of the structure (Revamping) or making small changes in its existing condition without the need to reduce or increase the basic process devices (Retrofitting) in order to achieve higher ...
Dissertation for M.Sc degree, major: food microbiology, abstract Sterilized milk products that are prepared by the Faradam method, especially Faradam milk and cream, have opened their place in the diet of Iranian people in recent years. By adding healthy ingredients to products such as breakfast cream, the nutritional value of these products can be improved. In this research, ...
Master's Thesis, Energy Conversion Engineering, Abstract: In many processes in the industry, the combination of liquid droplets with gas flow will lead to problems such as corrosion of downstream equipment and loss of expensive liquids. To solve these problems, the phases are separated from each other with the help of a separator. Cyclone separators, as a type of high efficiency ...
Master's Thesis of Mechanics, Energy Conversion, Abstract In this study, by using the computational fluid dynamics technique, an attempt has been made to obtain the optimal dimensions for the injection nozzles of the vortex tube device. For this purpose, numerical simulation has been performed for different values ??of length, width, and height of injection nozzles, and other ...
Master's Thesis in Mechanical Engineering (Energy Conversion) Abstract Numerical investigation of the effect of microstructures on heat transfer and fluid mixing in microchannels, the need for high heat transfer from electronic packages and optical systems, etc., has created a challenge in the field of thermal management. In this context, microchannel heat wells play a great ...
Master's Thesis in Mechanical Engineering (Applied Design) Abstract of three-dimensional interlayer stress investigation in mechanical connections in layered composite materials The purpose of this thesis is to investigate three-dimensional interlayer stresses in mechanical connections in layered composite materials. For this purpose, finite element method and ABAQUS software ...
Master's Thesis in Mechanical Engineering - Energy Conversion Abstract The vortex tube is a simple mechanical device that has no moving parts and is one of the equipment used in the refrigeration system, in which a high-pressure fluid enters the vortex tube through the inlet nozzles and splits into two streams with a lower and higher temperature than the inlet temperature, thus ...
Dissertation for Master's Degree (M.Sc.) in Agricultural Engineering, Food Science and Industry, Yogurt is the most famous and widely consumed fermented milk product in the world. The most common defect in texture that leads to the non-acceptance of this product by the consumer is water loss. Today, in Iran, condensed yogurt is mostly produced in the reverse way, that is, by ...
Abstract Today, rice is the main food of more than half of the world's population and rice is cultivated in five continents and more than forty countries. Rice is one of the main meals of the people of Iran, until 1340, Iran exported more or less rice annually, and since then, as a result of the improvement of the economic situation of the people and the rapid increase of the ...
Thesis for obtaining a master's degree in the field: Geography, specialization: Climatology in environmental planning. Abstract Different climatic parameters such as temperature, humidity and rainfall in a place are factors that influence the climate of that region and knowing them determines the climate of that region. Climate change is one of the most important climate issues ...
Dissertation for M.Sc. Natural Geography-Climate Chapter 1 General Research Introduction Tourism is one of the largest industries in the world, which has a fast growth. For many areas, tourism is the most important source of income, and for other areas, the economic return from tourism is very high (Masoompour, Khosh-Akhlaq). According to the forecast of the World Tourism ...
Dissertation to receive a master's degree in the field of meteorology with an urban orientation. Abstract: The researches conducted in the world mainly indicate a gradual increase in the average temperature. Today, the trend of freezing temperatures is one of the most important climate parameters that are evaluated to prove climate change in a region. Analyzing the trend of the ...
Master's thesis in the field of natural geography, climatology and environmental planning, abstract human civilization is based on the stability of climatic conditions, therefore climate change can be considered a threat to human civilization. In recent years, climate scientists have tried to trace these changes for some climatic elements, the most important of which is ...
Dissertation for Master's Degree (M.Sc) Field: Natural Geography - Hydrology and Synoptic Meteorology Abstract Damages caused by critical cold temperatures are increasing, especially in natural ecosystems and densely populated urban areas. Central Iran is a dry land prone to cold weather, especially during winter, and lacks resources to moderate temperature tensions, such as ...
Dissertation for obtaining a master's degree in electrical engineering, electronics, abstract, accurate measurement and control of temperature in industrial and research systems is of particular importance, and the correct operation of some industrial and laboratory tools is possible only in a certain location with a small number of channels (maximum 8 channels). Therefore, the ...
Master's thesis in medical engineering, bioelectrical trend, abstract of the separation of prosthesis projections and tissue implants in sinogram images of spiral CT scan using active contour methods for metal implants such as prostheses and tooth filling materials during the reconstruction of CT images with different methods, creates an artifact that appears as light and dark ...
Master's thesis in the field of chemistry, analysis, abstract. In this research, the synthesis of polymer nanoparticles of ion template using sedimentation method and for the separation and preconcentration of nickel ions from aqueous samples is reported. Nickel template polymer nanoparticles by dissolving stoichiometric amount of nickel nitrate and ligand ...
Master's Thesis of Medical Engineering, Bioelectrical Orientation Abstract: Separation of prosthesis projections and tissue implants in spiral CT scan sinogram images using active contour methods of metal implants such as prostheses and tooth filling materials during the reconstruction of CT images with different methods creates an artifact that appears as light and dark radial ...
Dissertation for receiving M.Sc degree in mechanical-structural engineering and the production of aluminide permeable coatings for the protection of gas turbines used in power plant, aviation, marine, oil and gas and petrochemical industries, which are mainly attacked by high temperature oxidation and hot corrosion phenomena. In this research, in order to use the effect of ...
Master's degree in electrical engineering, electronics, abstract, accurate measurement and control of temperature in industrial and research systems is of particular importance, and the correct operation of some industrial and laboratory tools is possible only in a specific location with a small number of channels (maximum 8 channels). Therefore, the decision was made to build a ...
Dissertation for Master's Degree in Plant Production Engineering - Horticultural Science Orientation Abstract This research has been done for the first time in the world to show the effects of low temperatures and its duration on the germination percentage and the amount of seed vigor. To perform this test, pollen grains of 3 early flowering, medium flowering and late flowering ...
Master's thesis in the field of mechanical engineering, energy conversion trend. Abstract: Considering that heat transfer is widely used in various fields of science, it is necessary to use wide recessed or raised surfaces due to physical and spatial limitations in electrical systems. The main purpose of using these surfaces is to increase heat transfer by increasing the ...
Thesis for receiving a master's degree in the field of civil engineering of hydraulic structures, October 2013 This study is to quantitatively evaluate the effects of watershed operations and with the aim of evaluating the efficiency of projects
Thesis for obtaining a master's degree in the field of educational management in the summer of 2013 Abstract: The present study was conducted with the aim of investigating the relationship between the use of information technology and the satisfaction of students of the Faculty of Agriculture, Urmia University.
Dissertation for Master's Degree in Civil Engineering/ Cold Water Engineering 1392 1-1- Introduction In this chapter, an overview of the concept of climate change and its causes and the effect of this phenomenon on natural resources and
Dissertation of master's degree in civil engineering, structural orientation, October 1390, first chapter of generalities. 1-1 Introduction In recent years, there have been many advances in the field
Dissertation of Master's Degree in Civil Engineering – Earthquake Engineering 2013 Abstract: Concrete beam and slab bridges with neoprene supports are among the most common highway bridges in the country.
Dissertation for receiving Master's Degree (M.A.) Field: Industrial Management (Production Orientation) Summer 1990 Abstract With the current progress of industries, the return and reuse of used products is one of the activities of May.
Master's Thesis of Information Technology Management (M.Sc) academic year 1389-1390 Abstract In order to study and predict the distribution pattern of economically important benthic fish, catch data of 10 species
Thesis of Master's Degree in Business Management (Financial Management) October 2013 Chapter 1 General Research 1-1) Introduction Income tax expense is one of the most important expenses of companies.
Master's Thesis of Faculty of Art and Architecture, Department: Carpet (Painting), October 2013 Abstract: Today, in today's advanced and industrialized world, using new methods, it is trying to make Tul products
Master's Thesis of Ardakan Faculty of Art and Architecture, Carpet Department (Primary Materials and Dyeing) Mehr 2013 Abstract: During the period of its use, the hand-woven carpet may be affected by various factors and conditions
Dissertation to receive the master's degree of industry group. Desti Bahman 92 Introduction Traditional architecture has been influenced by culture and climate for a long time and this is while in different regions of Iran the climate
Abstract Considering the sensitivity of the geographical location and the potentials in the Azad Qeshm Special Zone and the idea of ??improving the level of social interactions with other regions of the country and attracting domestic and foreign investors and improving the economic relations of the organization
Master's thesis of Ardakan Shahrivar Faculty of Art and Architecture 2013 During the Safavid era, Shah Ismail declared the Shia religion as the official religion of the Safavid dynasty. Continuity and long life of this dynasty and strength
Thesis for receiving a master's degree in the field of architecture 06/93 abstract Today, as a result of the application of massification and downsizing policy in large urban societies, traditional housing has lost its meaning and concept