Download more than 100 examples of thesis, proposal and project topics about super absorbent polymer in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Thesis for obtaining a master's degree in the field: agricultural engineering, horticultural sciences, specialization: physiology and breeding of fruit trees. Abstract: Drought stress is one of the most important factors limiting the growth of plants in arid and semi-arid regions of the world, such as Iran. The importance of using water resources and the occurrence of recent ...
Dissertation for receiving the master's degree ""M.Sc."" Orientation: Agriculture Abstract Effect of different levels of super absorbent (A-200) on the yield and yield components of wheat cultivar Shahriar at different levels of irrigation in two types of soil with different textures. This research was conducted in order to investigate the effect of the application of different ...
Dissertation for obtaining a master's degree in chemistry, fluoride has been known as a toxic ion for many years. The main source of fluoride in aqueous solutions is minerals containing fluoride and the industrial activities of factories. According to the report of the Environmental Protection Organization, the amount of fluoride more than 1 mg/liter causes various diseases. In ...
Dissertation for Master's Degree in Civil Engineering - Soil and Foundation Mechanics Abstract The purpose of this research is to improve the mechanical and geotechnical properties of windy sand soils. Because one of the major problems of windblown sand is its low resistance under natural and saturated moisture conditions, a laboratory study was conducted to investigate the ...
Master's thesis in the field of chemical engineering, abstract of the laboratory study of iron oxide production on a microstructural scale using the precipitation method with supercritical anti-solvent by: One of the problems of cement used in oil wells, which are used to connect wall pipes and well walls, is that these cements do not have the desired resistance against high ...
Dissertation for obtaining a master's degree in civil engineering, structural orientation, March 2013, abstract of the scope of using FRP materials for shear strengthening of reinforced concrete beams in
Thesis for the M.Sc degree in wood and paper industry engineering, Mehr 2013 Abstract: In this research, the physical and mechanical properties of nanocomposites obtained from cellulose nanofibers and poly polymers
Dissertation to receive the master's degree ""M.S.c"" specialization: Textile chemistry and fiber science Abstract: One of the important processes in the completion of textile goods is the underhand improvement in textiles. Finishing the softener provides a desirable softness to the fabric and improves its properties, and the main goals of the softener are to reduce static ...
To receive a master's degree in textile technology engineering. Abstract In the previous research, multi-sized nano-roughness was developed using nanoparticles with different sizes and different surface charges along with silicone resin coating to produce multi-purpose textiles with stable properties. In this research, the idea of ??using laser irradiation and finishing textiles ...
Master's Thesis (M.sc) Civil Engineering, Soil and Foundation Mechanics Abstract In this research, the stability of soil reinforced with geogrid located on an underground cavity was analyzed using plaxis software, and the effect of several factors such as the number of geogrid layers, the length of the geogrid layer, the stiffness of the geogrid layer, the optimal location of ...
Master's Thesis in the field of Chemical Engineering Abstract Investigation of parameters affecting the production of alumina gel by sol-gel method Sol-gel method is one of the common methods that is widely used to produce different nanoparticles. In this method, a solution of initiators is mixed with water in the presence of a catalyst, and hydrolysis and polymerization ...
Master's Thesis (M.Sc.) Direction: Process Design Abstract Currently, membranes have found a special place in different separation industries and have wide applications in different fields of separation, including liquid solutions and different gases. Membrane technology is one of the most widely used technologies in today's industry, whose field of application is wide ranging ...
Dissertation to receive the Ph.D. degree in Pharmacy. Persian summary. Quick-release oral tablets are solid pharmaceutical forms that have received special attention in the last three decades and are considered as an alternative to regular tablets and capsules. In contact with oral saliva, these tablets quickly disintegrate and turn into soluble fine granules in less than 1 ...
Master's thesis in the field: Chemical Engineering Abstract In this research, a comprehensive two-dimensional model based on the Finite Element Method (FEM) is proposed for modeling gas-solvent membrane contactors to remove carbon dioxide[1] from synthesis gas. Aqueous solution of monoethanolamine has been used as absorbent solvent stream and CO2/N2 gas mixture as gas stream. ...
Master's Thesis of Chemical Engineering Abstract In this research, the optimal absorption conditions for cationic dyes have been investigated and the removal of brilliant green dye [1] by the natural adsorbent of khakshir has been investigated. First, the effective conditions in the amount of brilliant green removal by the khakshir stem adsorbent were researched, then using the ...
Master's degree thesis in the field: Chemical Engineering Abstract In this project, an attempt was made to take a small step towards the synthesis of silicoaluminophosphate molecular sieve in nano dimensions and its use in fuel cells with methanol fuel. Therefore, in this way, nano silicoaluminophosphate was produced under optimal hydrothermal conditions. Next, XRD, FT-IR, SEM ...
Dissertation for M.S.c Master's Degree Orientation: Applied Abstract: In recent years, semi-conducting nanoparticles have attracted a lot of attention due to their electrical and mechanical properties, which result from limited quantum effects compared to their counterpart materials. Among semiconductor nanoparticles, ZnO nanoparticles have higher efficiency. To achieve higher ...
Dissertation for Master's degree (M.Sc) Major: Organic Chemistry Abstract Carbon-carbon bond formation is very important in organic chemistry. One of the reactions that lead to the formation of this bond is the Novnagel condensation reaction. The products of this reaction have wide applications, including in the pharmaceutical, paint, polymer and other industries. . . are In ...
Abstract Introduction: One of the most common types of fractures in the jaw and face area is the fractures of the middle area of ??the face and cheekbones, in which the anterior wall of the sinus is involved in the majority of these fractures. Following the fracture of the front wall of the sinus, soft tissue prolapse, sinusitis, rhinitis, pain and tenderness can occur when ...
Master's thesis in the field of mining chemistry Abstract: In this study, the effect of amide substitution on the surface of graphene oxide was studied. Two amines were chosen to change the contact surface and absorption rate. of a linear diamine such as ethylenediamine[1] and cyclic amine 6-aminouracil[2] with two different characteristics were evaluated. After the synthesis ...
Dissertation for receiving the degree of Doctor of Dentistry Abstract The long-term clinical success of implants is dependent on osseointegration and adhesion of soft tissues and epithelium to implant surfaces. Various indices including: plaque index, gingival index, bleeding during probing and bone resorption are used to evaluate the health of the soft tissues around the ...
Dissertation to receive a Ph.D. in Pharmacy Persian Summary Simvastatin with the brand name Zocor is a drug that is widely used in the treatment of hypercholesterolemia. Simvastatin has a poor solubility in water which reduces its therapeutic benefit, drug solubility behavior remains one of the challenging aspects in formulation development. Considering that many drugs have ...
Master's Thesis of Polymer Industry Engineering Abstract With the progress of human civilization, technology development and the ever-increasing population, the world is currently facing a problem called pollution that threatens the lives of the inhabitants of the earth. Pollution caused by the accumulation of persistent toxic compounds in soil and water, such as chemicals, ...
Abstract Background and Purpose: Emulsions are an important part of most food, pharmaceutical and cosmetic systems, which are very important in various industries due to their special rheological and physicochemical properties. But the main limitation of these systems is their thermodynamic instability, which causes phase separation over time. In this research, the effect of ...
Dissertation for Master's Degree in Mechanical Engineering Field: Applied Design Abstract In this thesis, stability analysis of composite beam reinforced with carbon nanotubes on elastic support under axial force is investigated. The distribution of nanotubes is assumed to be uniform[1]. To determine the properties of materials reinforced with nanotubes, the results of molecular ...
Master's Thesis on Car Structure and Body Abstract In recent years, many researchers have allocated their attention to a special category of materials, memory materials. The ability to absorb and control vibrations actively or passively, respectively, is affected by the features of shape memory and hysteresis energy loss caused by the pseudo-elastic characteristics of these ...
To receive a master's degree in polymer engineering - polymer industries, May 2013 abstract With the progress of various sciences and knowledge, the boundaries of knowledge have converged and in some fields we are witnessing
The thesis for receiving a master's degree in the field of educational psychology ""M.A"" Abstract of the present research was carried out with the aim of ""investigating the relationship between cognitive styles and self-regulated learning with superior hand in students"". The sample consisted of 90 students who were selected through random cluster sampling from the female ...
Master's thesis in the field of clinical psychology. Abstract of the comparison of coping skills, impulsivity and behavioral disorders in three groups of unsupervised, poorly supervised and normal adolescents. Unfortunately, today we witness that the number of unsupervised and poorly supervised children and adolescents is increasing every day. Many social variables are involved ...
Master's thesis in the field of civil engineering, structure orientation. Abstract: In this study, the effect of some effective parameters on the strength of polymer concrete based on epoxy resin, including hardener, filler, and solvent, has been investigated. Rice husk ash and broom stalk ash were used as fillers and acetone-toluene mixture with a ratio of 50-50% was used as a ...
Dissertation for Master's Degree in Chemistry (Applied Chemistry - Polymer) Abstract: Ethylene polymerization was successfully performed in the presence of Phillips catalyst and in the slurry phase. In the continuation of the work, the effect of some effective parameters in polymerization, including the effect of trialkylaluminum, the effect of 1-hexane comonomer, the effect of ...
Master's Thesis in Chemical Engineering, Thermodynamics and Kinetics Abstract: A major part of the final properties of the product in emulsion polymerization is determined by the particle size distribution. In this project, an accurate model based on population balance equations (zero-one model) which includes the phenomena of nucleation and particle growth has been chosen to ...
Dissertation for receiving the master's degree ""M.Sc"" orientation: abstract structure In today's reinforced concrete buildings, the use of interframe separators is very common. Intermediate frames with building materials are the main types of separators that are used in this type of buildings. In previous research, these interframe separators are usually considered as ...
Master's thesis in the field of chemistry, analysis, abstract. In this research, the synthesis of polymer nanoparticles of ion template using sedimentation method and for the separation and preconcentration of nickel ions from aqueous samples is reported. Nickel template polymer nanoparticles by dissolving stoichiometric amount of nickel nitrate and ligand ...
Dissertation for Master's Degree in Power Electrical Engineering Abstract In this thesis, a hybrid power generation system using fuel cell/battery/supercapacitor to power a light electric vehicle with independent excitation electric motor drive system was studied and simulated. The electric vehicle system consists of a feed and control system, multiple sources, power control ...
Doctoral Dissertation in Chemical Engineering-Biotechnology Abstract The purpose of this study was to produce polyhydroxyalkanoate biopolymer using glucose, fructose, molasses and whey carbon sources by microorganisms Azohydromonas lata DSMZ 1123, Azotobacterbeijerinckii DSMZ 1041, Cupriavidus necator DSMZ 545, Hydrogenophaga pseudoflava DSMZ 1034. In the first stage, to screen ...
Master's Thesis in Special Care Nursing Abstract: Introduction: Today, one of the most common invasive ways in medical care is the use of intravenous injections, and like any other method, it has many complications, the most common of which is phlebitis, and one of the treatment goals is to prevent it. Therefore, this study was conducted with the aim of determining the effect of ...
Master's thesis in the field of chemistry, Analytical Chemistry, Abstract In this project, a molecular template polymer was prepared for the selective extraction of phenylmercury chloride. To prepare this polymer, methacrylic acid (active monomer), ethylene glycol dimethacrylate (cross-linking agent), 2,2-azobisisobutyronitrile (initiator), phenylmercury chloride (target ...
A master's thesis in the field of chemical engineering, abstract of biodiesel production from microalgae by supercritical carbon dioxide extraction method. In this research, different stages of biodiesel production from Chlorella vulgaris microalgae, especially the stage of oil extraction from it, were experimentally studied. The method of microalgae cultivation was selected ...
Dissertation Chemistry for Master's Degree Abstract Acrylic-based pressure-sensitive adhesives are more expensive than rubber-based adhesives, but they have a longer life and resistance to high temperatures, chemicals, UV rays, solvents, light, softeners, and the environment. Modification of acrylic pressure-sensitive adhesives is useful for improving adhesion properties. In ...
Master's thesis in the field of chemistry, Analytical Chemistry, Abstract In this project, a molecular template polymer was prepared for the selective extraction of furan. To prepare this polymer, methacrylic acid (functional monomer), ethylene glycol dimethacrylate (cross-linking agent), 2,2-azobisisobutyronitrile (initiator), a mixture of pyrrole (furan substitute or target ...
Master's thesis in the field of polymerization engineering, abstract was determined by using experimental design methods to determine the optimal feed recipe for the preparation of nitrile rubber. Initially, to determine the factors affecting the rate of polymerization, screening tests were designed according to the Plate-Boorman method, which examines a large number of factors ...
Dissertation for obtaining a master's degree (M.Sc) in the field of organic chemistry. Dissertation abstract (including summary, objectives, implementation methods and results obtained): Investigating the effect of cationic polymer compounds in hair care products including shampoo and conditioner on the hair strand, especially its effect on the cuticle of the hair strand. The ...
To obtain a master's degree in mechanical engineering - manufacturing and production Abstract Fuel cells are electrochemical devices that are used to directly convert fuel into electrical energy. One of the most important types of fuel cells is the polymer fuel cell, which is widely used. In general, two types of optimization can be done in the polymer fuel cell: optimization in ...
Dissertation for Master's Degree (M.A.) Orientation: Educational Management Summer 2019 Abstract: The main purpose of this research is to evaluate the effectiveness of the special educational course while serving faculty speech writers.
Dissertation for Master's Degree (M.A) in Educational Management Spring 2014 Introduction The basis of power and vitality in today's world comes back to the level of having science and knowledge. Today, the majority of the directions of the world are towards the production and development of science and technology, and developed countries are transitioning from industrial ...
Chapter One Research Overview 1 Introduction All over the world, the banking industry is considered one of the most important pillars of the economy of any country, and due to the provision of various financial and credit services, it plays a decisive role in the development of
Dissertation for Master's Degree (M.A. Public Management, Financial Orientation, Winter 2019) Summary of the present research with the aim of ""investigating the significant difference in the country's budget stages before and after the establishment of
Dissertation for Master's Degree in Executive Management, Marketing and Export Orientation, December 2013 Abstract: Marketing and its effect on commercial performance, including important topics in market and customer management.
Thesis for receiving the degree of master's degree (M.A) Trend: Educational research in the fall of 2012, satellite abstract from the seventies to today in Iran, has continued to influence society and family.
Master's Thesis in Philosophy of Education and Training May 2014 Abstract: The purpose of this research is to investigate the importance and position of Challenging and neglected Spiritual education And then
Thesis of Master's Degree in Executive Management, Orientation: Strategy of the academic year 90-91 Abstract The issue of management skills is one of the issues that has been of interest since the beginning of management development until today
Master's Thesis in Educational Management (M.A.) Academic Year 2012-1393 Abstract The subject of the current research is to examine the relationship between the organizational excellence model (EFQM) and the performance of education
Thesis for obtaining a master's degree in the field of educational management in the summer of 2013 Abstract: The present study was conducted with the aim of investigating the relationship between the use of information technology and the satisfaction of students of the Faculty of Agriculture, Urmia University.
Dissertation for receiving the master's degree in management "M.A." Trend: financial winter 2013 Abstract The aim of the current research is to explain the relationship between leadership competencies
Field: Executive Management Fall 2019 Abstract: The purpose of this research is to investigate the relationship between organizational justice and job performance of employees of Ardabil gas company. Organizational justice, the role of fairness and especially the perception of fairness in the environment
Summer 1390 Expertise Master of the field: Civil Engineering Orientation: Structure Abstract: In this thesis, the effect of nanosilica on the mechanical properties and durability of concrete containing polypropylene fibers
Dissertation of master's degree in civil engineering, structural orientation, October 1390, first chapter of generalities. 1-1 Introduction In recent years, there have been many advances in the field
Dissertation for Master's Degree in Civil Engineering (M.Sc) Orientation: Structure Winter 2013 Abstract: Resilient construction of important government buildings, infrastructure facilities and vital arteries due to the increase
Master's Thesis in Budget and Financial Management, February 2019 Abstract In recent years, the country's banking system has become obsolete and overdue due to the significant growth in the rate of receivables
Dissertation for the Master's Degree (M.A) in Finance, Winter 2013 Abstract: In this research under the title « Investigation of human resource management on the financial performance of Melli Bank branches » that d
Master's Thesis in Financial Management and Budgeting, September 2019, abstract according to the duties of the legislator to implement financial supervision in order to properly implement the budget and comply all payments with laws and regulations.
Master's Thesis in Civil Engineering - Earthquake Engineering March 2012 Abstract Reinforced soil is a special material that is created from the combination of soil and reinforcing member. Arming components resistant to N
Thesis for receiving a master's degree in the field of civil engineering with structural orientation in February. 2013 Abstract: In recent years, significant progress has been made in the field of improvement and resistance
Dissertation of Master's Degree in Civil Engineering – Earthquake Engineering 2013 Abstract: Concrete beam and slab bridges with neoprene supports are among the most common highway bridges in the country.
Master's Thesis in History and Philosophy of Education (Trend of Islamic Education) June 2014 Abstract In today's society, discussions about religion and belief and non-belief in religion
Dissertation for M.A. Department of Public Management with Transformational Orientation Abstract The purpose of the current research is to investigate the relationship between organizational climate and job stress and creativity among the employees of Salam Insurance General Administration.
Thesis for receiving the degree of master's degree (M.A.) orientation: ""domestic trade"" winter 2011, the first chapter of the general research Introduction: the word risk in the word means risk and hazard, but in the definition
Dissertation for obtaining a master's degree (A..M) orientation: Human Resources Winter 2019 Abstract With the advancement of technology and the complexity of organizational activities, it can be boldly claimed that the working life of
Thesis for receiving the master's degree of Handicrafts Department, Mehr 2013 Abstract: A myth is the narrator of an event that humanity tries to fix alienation from the natural phenomena around it by clinging to it. A
The final research of the DBA strategic management course in Tir 1391 Abstract The purpose of this research is to determine the components of the development of the leather industry infrastructure and to develop a suitable model for the development of the leather industry infrastructure.
M.A. Thesis for obtaining a master's degree (Tension: Human Resource Management, Summer 2013) Abstract: This research is aimed at investigating the relationship between managers' awareness of management duties and decision making.
Master's Thesis Field: Executive Management Focus: Strategic Management Academic Year: 1389-1391 Abstract of Research Measuring market risk is a problem that has been on researchers' minds for a long time
Master's Thesis - Allameh Tabatabayi University Summer 2018 Abstract The purpose of this research is to evaluate the quality of services provided from the perspective of customers of 4 and 5 star hotels in Isfahan province. Based on the Seroqual model
Dissertation for Master's Degree in Public Management, Organizational Transformation Orientation Winter 1391 Abstract The current research aims to investigate the relationship between transformational leadership and Empowerment of psychology
Thesis of master's degree in tourism management, planning and development trend, spring 2013, abstract in today's world, program Strategic planning is considered as an important building block for development and is necessary
Thesis for obtaining a master's degree in the field: public management, winter 91 Abstract The main purpose of this research is to determine the relationship between the quality of working life (fair and adequate pay, safe and healthy work environment,
The first chapter General 1 - 1 program introduction Economic planning requires knowledge of the general performance of the country's economy. But in most countries, some of the economic activities are exposed to politics