Download more than 100 examples of thesis, proposal and project topics about steel building in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Dissertation to receive M.Sc degree in civil engineering, structural orientation. Abstract: One of the ways to strengthen the building against lateral loads is the use of a wind system (convergent or divergent). The increasing use of steel braces to deal with earthquake forces requires that the seismic performance of these types of systems be given more attention. The common ...
Dissertation for receiving a master's degree in the field of civil engineering in the field of earthquakes. Abstract: The introduction of damage generators is very close to the concept of inelastic behavior and, as a result, hysteresis energy. Therefore, it can be said that the hysteresis energy at these levels can be a significant criterion for the design or control of the ...
Master's Thesis in Civil Engineering - Earthquake Engineering 1391 Abstract Structures with frames with coaxial braces are among earthquake resistant systems. These structures are widely
Dissertation of master's degree in structural engineering, February 2011 Abstract: In the optimal civil engineering structure construction for static loadings have been significantly developed. But, in
Master's Thesis in Civil Engineering - Structural Orientation, February 2013 Abstract: The performance of a building during an earthquake depends on many factors, as a result, predicting the seismic performance of structures should be considered either explicitly or implicitly as part of the design or evaluation. Predicting the seismic response of the structure is very ...
Dissertation for Master's Degree Abstract: Dealing with external forces such as earthquakes is one of the most important missions of civil engineers. In order to achieve this goal, the light metal frame system, which has advantages such as the possibility of industrial production, prefabrication and lightness, can be considered as a suitable alternative to traditional systems. ...
Dissertation for Master's Degree in Civil-Structural Engineering Abstract In our country, most of the structures and maybe all the conventional buildings are analyzed and designed independently, which means that these structures are mainly analyzed and designed by conventional software and considering a rigid or articulated support, and then the forces obtained at the base of ...
Dissertation for Master's Degree in Civil Engineering with Earthquake Orientation Abstract: Semi-rigid joints [1] are joints whose hardness is between the two states of grip and joint and transmit a part of the anchor, in other words, its degree of rigidity is between 20% and 90%. In this thesis
To obtain a master's degree in the field of civil engineering - structural orientation. Abstract: The subject of this research is to investigate the level of performance and accuracy of methods based on non-linear static analysis and the need to retrofit steel buildings with a dual system of bending frame with cross brace and convergent 7-shaped brace designed with the 2800 Iran ...
Dissertation for master's degree in civil engineering, structural orientation. Abstract: Today, in earthquake-prone countries, it is recommended to use a variety of energy-depleting tools in order to dissipate the energy of earthquakes on the structure. One of these tools is rotational friction dampers. Because the current regulations do not provide a value for the coefficient ...
Dissertation for Master's Degree in Civil Engineering - Structural Orientation Abstract: The most basic goal in the seismic design of structures is to prevent the structure from collapsing during severe earthquakes, which is the basis of the governing theory of seismic behavior, the result of investigating the nonlinear behavior of the structure during an earthquake and the ...
Dissertation for master's degree in the field: civil engineering, structural orientation. Abstract One of the phenomena that can occur during the design, implementation and operation of buildings is the phenomenon of progressive rupture. This phenomenon is defined as the spread of failure in a structure from one element to another in such a way that it eventually leads to the ...
Dissertation of the master's degree in the field: civil engineering - structure, page 1-1-problem definition: In the science of structural engineering, there has always been an attempt to predict a set of events that will have a significant effect on the efficiency and endurance of the structure during its useful life. These factors should be considered by the design engineer ...
Dissertation for receiving the master's degree ""M.Sc"" orientation: abstract structure In today's reinforced concrete buildings, the use of interframe separators is very common. Intermediate frames with building materials are the main types of separators that are used in this type of buildings. In previous research, these interframe separators are usually considered as ...
Dissertation for receiving a master's degree in the field of structural oriented civil engineering, 2013, although the construction and design methods of structures have expanded over the years, but still the effect of earthquakes is one of the most important.
Dissertation for obtaining a master's degree in civil engineering, structural orientation, March 2013, abstract of the scope of using FRP materials for shear strengthening of reinforced concrete beams in
Summer 1390 Expertise Master of the field: Civil Engineering Orientation: Structure Abstract: In this thesis, the effect of nanosilica on the mechanical properties and durability of concrete containing polypropylene fibers
Dissertation for Master's Degree in Civil Engineering (M.Sc) Orientation: Structure Winter 2013 Abstract: Resilient construction of important government buildings, infrastructure facilities and vital arteries due to the increase
Dissertation for obtaining a master's degree in civil engineering – Spring 2014 structure trend, first chapter, general research 1-1- Introduction: Mostly structures for severe earthquakes and surface acceptance
Dissertation of master's degree in civil-structural engineering Abstract: Divergent bracing frames are considered earthquake-resistant systems for steel structures. These braces are from my difficulty
Master's Thesis in Civil Engineering - Earthquake Engineering March 2012 Abstract Reinforced soil is a special material that is created from the combination of soil and reinforcing member. Arming components resistant to N
Thesis for receiving the degree of M.Sc. Trend: soil and soil in February 2013 Abstract: Allowed load capacity or safe load capacity is a virtual pressure that is within the range of
Dissertation of Master's Degree in Civil Engineering – Earthquake Engineering 2013 Abstract: Concrete beam and slab bridges with neoprene supports are among the most common highway bridges in the country.
Dissertation for M.Sc degree in soil and soil mechanics engineering, summer 2013, first chapter, introduction of micro candles 1-1 Micro-candles in general in dealing with problematic soils
Dissertation of master's degree in structural engineering February 2019 Chapter 1: Introduction 1-1. General, one of the most important natural events that always affects the lives of human beings
Master's thesis in the field of automation engineering and precision instruments, abstract presenting a new method in information clustering using a combination of bat algorithm and Fuzzy c-means. The similarity between data within each cluster is maximum and the similarity between data within different clusters is minimum. Fuzzy c-means is also a fuzzy clustering technique that ...
In order to obtain a master's degree in the field of civil engineering - soil and foundation orientation, Abstract Nowadays, circular foundations are more or less used for structures, especially structures that have axial symmetry. In this research, a numerical study was conducted on bearing capacity and settlement of annular foundation. PLAXIS software was used for modeling. ...
Master's Thesis (M.sc) Civil Engineering, Soil and Foundation Mechanics Abstract In this research, the stability of soil reinforced with geogrid located on an underground cavity was analyzed using plaxis software, and the effect of several factors such as the number of geogrid layers, the length of the geogrid layer, the stiffness of the geogrid layer, the optimal location of ...
Dissertation for Master's Degree in Civil Engineering, Soil and Foundation Mechanics Abstract: Since many structures are built in dense urban areas, there is an increasing need to build buildings and geotechnical structures on soft clay soils. Clay soils usually show significant creep deformation. Although a lot of research has been done on the creep behavior of natural clay, ...
Master's thesis in the field of civil engineering, structure orientation. Abstract: In this study, the effect of some effective parameters on the strength of polymer concrete based on epoxy resin, including hardener, filler, and solvent, has been investigated. Rice husk ash and broom stalk ash were used as fillers and acetone-toluene mixture with a ratio of 50-50% was used as a ...
Master's thesis in the field of civil engineering, structural orientation. Abstract In this study, the evaluation and comparison of nonlinear and numerical analysis of deep reinforced concrete beams with openings without reinforcement with deep concrete beams with openings reinforced with FRP sheets and deep reinforced concrete beams without openings by Abaqus finite element ...
Dissertation for receiving a master's degree in the field of civil engineering with a focus on soil and foundation. Abstract: The compressibility behavior of soils has become an important concern in geotechnical engineering. As buildings, embankments and roads are implemented, significant settlements often occur. Since long-term settlements occur due to creep, therefore, the ...
Master's Thesis in Civil-Structural Engineering Today, domes and arches have found wide applications in architectural and industrial structures due to their suitable coverage of large openings. The use of today's technologies in styling and optimizing energy consumption in these types of structures is one of the important challenges facing engineers. Therefore, the need to ...
Master's Thesis in Civil Engineering-Earthquake Abstract Using braces as a lateral resistance system in steel structures is one of the most common methods to withstand the forces caused by earthquakes. One of the weak points of this system is the compression resistance of the bracing member and its buckling as a result of reducing the member's load. Today, this problem has been ...
Education Level: Master's Degree, Field: Civil Engineering, Major: Structures Abstract: In this thesis, the effect of nanosilica on the mechanical properties and durability of concrete containing polypropylene fibers was investigated. Polypropylene fibers with a length of 18 mm and a ratio of length to diameter of 0.9 mµ were used. The effect of fibers and nanosilica in three ...
Civil Engineering Master's Thesis - Soil and Foundation Mechanics Abstract From the past until now, one of the most economical methods to improve the mechanical properties of clay soils has been stabilization by means of additives such as lime and cement in construction projects such as road construction and consolidation of building foundations. Also, with the passage of time ...
Master's thesis in the field of civil engineering, structure, first chapter: introduction 1-1. General One of the most important natural events that has always changed people's lives and sometimes destroyed human civilizations by destroying buildings is earthquake. Therefore, humans have always tried to identify and deal with the dangers caused by earthquakes and still have not ...
Dissertation for receiving a master's degree (Sc..M) field: civil engineering, specialization: structure, abstract: In recent years, the subject of seismic isolation has been particularly focused on the seismic design of buildings. The main purpose of this work is to isolate the structure from the ground instead of using conventional retrofitting methods The equipment used in ...
Introduction In today's era, the presence of waste materials resulting from various physical and chemical processes is one of the important problems of industrialized and developing countries. So that extensive research is being carried out for methods of recycling or disposing of them to minimize the damage to the environment. In this regard, construction researchers, like ...
Dissertation for receiving a master's degree in the field of civil engineering, structure orientation. Abstract: Today, many reinforced concrete structures that are in operation are more than 75 years old and have been damaged due to natural disasters such as earthquakes and wind, or due to material fatigue or corrosive factors. Maintenance of structures is very important due to ...
Dissertation for receiving a master's degree in the field of Civil Engineering (M.Sc) Major: Structure Abstract: The retrofitting of important government buildings, infrastructure facilities and vital arteries due to the increase in terrorist attacks around the world and the possibility of bombings near buildings and urban places is one of the most important discussions in the ...
A master's thesis in the field of chemical engineering. Abstract of the laboratory study of the wear phenomenon of gas containing sand and liquid droplets in pipelines. For this purpose, a pipeline test device including: vertical and horizontal pipelines and various connections has been made. The studied fluid consists of three phases: gas, liquid and solid. The gas phase is ...
Dissertation for Master's Degree in Chemical Engineering Abstract: Microbial fuel cell biotechnology is a new science, in which microorganisms, as cheap catalysts, convert the chemical energy contained in organic and inorganic compounds into electrical energy. Optimizing parameters affecting battery performance is one of the first laboratory steps towards the development of this ...
Master's Thesis in Mechanical Engineering, Applied Design, Abstract In this research, an analytical solution is presented to show the size dependence and the effect of temperature difference on nonlinear free vibrations and post-buckling behavior of microtubes containing current. Based on Euler-Bernoulli model, strain gradient theory, Couple's stress theory and von-Carman ...
Dissertation for a master's degree in civil engineering, soil and foundation mechanics. Abstract: Since many structures are built in dense urban areas, there is an increasing need to build buildings and geotechnical structures on soft clay soils. Clay soils usually show significant creep deformation. Although a lot of research has been done on the creep behavior of natural clay, ...
Master's thesis in the field of automation engineering and instrumentation, abstract presenting a new method in information clustering using a combination of bat algorithm and Fuzzy c-means. The similarity between data within each cluster is maximum and the similarity between data within different clusters is minimum. Fuzzy c-means is also a fuzzy clustering technique that ...
Dissertation for M.Sc Master's degree, mechanical engineering-applied design Abstract With the emergence of composite materials, a huge progress was achieved in many engineering applications. Nevertheless, problems such as delamination, stress concentration, and discontinuous distribution of stress, the idea of ??creating a new type of composite materials in which properties ...
Master's thesis in the field of civil engineering, structural orientation Chapter 1: Introduction 1-1. General One of the most important natural events that have always transformed human life and sometimes destroyed human civilizations by destroying buildings is earthquake. Therefore, humans have always tried to identify and deal with the dangers caused by earthquakes and still ...
Expert thesis Master of Civil Engineering, Structural Orientation, September 2013 Abstract Today, with the progress of science in the construction industry, many methods have been presented to improve reinforced concrete structures
Dissertation for master's degree in the Department of Geography and Urban Planning Abstract One of the phenomena that today's cities, especially large cities, are facing is the phenomenon of high-rise construction. The rapid and uncontrolled growth of the population in cities and the consequent need for housing on a large scale, on the one hand, and preventing the horizontal ...
Master's thesis in the field of geography, urban planning, abstract Urban crises are an integral part of urban management, and this issue takes a much more complicated form in metropolitan cities, considering the large and growing population of Isfahan metropolis and its location in the Sanandaj-Sirjan zone, the occurrence of a large earthquake or other natural and human ...
Chapter 1 Introduction and Generalities 1-1 Introduction Since long ago, humans have been thinking about the effective and useful use of their abilities, facilities and resources, but in today's industrial world, this is more than ever.
Thesis for obtaining a master's degree in the field: business management, transformation orientation, background and purpose: employees are known as a potential source of resistance to change (Okumos and Hemmington, 1998), as the experiences of an organization change, its members have different interpretations and expectations for those changes. Cognitive understanding of the ...
Dissertation for Master's Degree in Industrial Management, Financial Orientation Introduction In today's industrial world, which is affected by tight industrial competition, the need to pay attention to the quality of the final product or service and its continuous improvement is of particular importance for the managers of any production or service organization. In other words, ...
Thesis for Master's Degree in Industrial Management Abstract Maintenance and repairs play an important role in maintaining reliability, availability, product quality, reducing risk, increasing efficiency and security of equipment. Manufacturing companies are always trying to reduce production costs. One of the basic costs of these enterprises is the cost of repairs, which mainly ...
Dissertation for obtaining a master's degree in electrical engineering, electronics, abstract, accurate measurement and control of temperature in industrial and research systems is of particular importance, and the correct operation of some industrial and laboratory tools is possible only in a certain location with a small number of channels (maximum 8 channels). Therefore, the ...
Dissertation for obtaining a master's degree in electrical engineering, electronics, abstract. The many advantages of on-site calibration compared to calibration in the calibration center have led to the formation of mobile calibration teams in all companies that work in the field of calibration. Therefore, in recent years, the design of standards and equipment suitable for ...
The academic thesis for obtaining a master's degree in the field of visual communication. Abstract Decorations in Iranian architecture have always been used as one of the methods of creating beauty by maintaining the unity of the whole in the same multiplicity of parts. Various types of decorations have been used in Iranian architecture. These decorations include various plant, ...
Dissertation for Master's Degree in Civil Engineering, Soil and Foundation Mechanics Abstract: Fine-grained clay soils have always caused problems in construction projects, one of the ways to improve the properties of problematic clay soils is to use lime to stabilize the soil. It swells. this
Dissertation of Master's Degree in Civil Engineering - Structure Abstract In metal structures, one of the most important places of stress concentration is the joint. In form cutting, the shear force at the connection point is so high that a part of the beam or its reinforcement is broken and separated in pieces, and this is due to negligence in the design of the connection or ...
Master's Thesis in Civil Engineering (M.Sc) Major: Project Management and Construction Abstract: Seismic improvement of educational buildings is one of the main priorities of the government after the Bam earthquake. This incident drew the attention of the statesmen to the fact that the improvement of educational buildings in Iran is a historical necessity, and if a proper ...
Dissertation for receiving the degree of Doctor of Dentistry Abstract Introduction Considering the importance of milk teeth in creating an ideal occlusion, it is essential to preserve and maintain them due to caries. One of the methods of restoring milk teeth is the use of stainless steel veneers. Maintaining the health of the tissue that supports the teeth is one of the ...
Dissertation for Master's Degree in Mechanical Engineering Abstract: Nowadays, due to the increase in population in big cities, building high-rise buildings and residential towers may seem inevitable. But in locating these types of buildings and placing them together, a series of environmental requirements must be observed. In this thesis, an attempt has been made to re-evaluate ...
Master's degree in electrical engineering, electronics, abstract, accurate measurement and control of temperature in industrial and research systems is of particular importance, and the correct operation of some industrial and laboratory tools is possible only in a specific location with a small number of channels (maximum 8 channels). Therefore, the decision was made to build a ...
Dissertation for M.Sc) in the field of mechanics in the field of construction and production. Abstract In the present research, the design and construction of the ECAR machine in order to investigate the effects of the process on carbon steel sheets was our goal. The desired research was carried out in the research workshop of Islamic Azad University, Jaseb branch. After the ...
Master's Degree Thesis Abstract With the advancement of technology, the need to use new materials is felt. New methods have been developed to make new materials. Among the new materials in progress, we can mention double-layer sheets. These materials have composite properties of composite materials. The purpose of this research is to produce a double-layer sheet of 304L ...
Executive Management Master's Thesis 1 Chapter 1 General Research 1-1 Introduction The necessity of globalization of companies and societies is an accepted and undeniable reality. In the current business environment, more than in any past period, the only thing that remains constant is the phenomenon of changes. The rapid and enormous changes of the last two decades in ...
Dissertation for Master's Degree (M.A) in Educational Management Spring 2014 Introduction The basis of power and vitality in today's world comes back to the level of having science and knowledge. Today, the majority of the directions of the world are towards the production and development of science and technology, and developed countries are transitioning from industrial ...
Dissertation for obtaining a master's degree in civil engineering. 2013 Winter Earthquake Abstract of earthquakes close to the fault due to having pulse type movement with a long period at the beginning of the record, including
Thesis - Master's Degree in Geophysics - Seismology 2012 Abstract Seismic hazard estimation to calculate a certain level of damage and vulnerability in the design of structures is one of the most important topics and principles of earthquake engineering, but
Department of Industrial Management Winter 2019 Abstract: The current research is about the mutual effect of supply chain management and customer relationship management in Esfrain Steel Company. In order to answer the research questions
Thesis of master's degree in business management, marketing orientation, summer 1991. Abstract: This research with the subject of "" Investigating the effect of social marketing factors on the value of the bank's brand name from the customers' point of view (Study
Dissertation for the degree of ""M.A."" Field: Educational Management Abstract of the present research with the aim of knowing and analyzing Investigating the relationship between trust in management and job satisfaction of teachers in water schools
Dissertation for Master's Degree in Civil Engineering/ Cold Water Engineering 1392 1-1- Introduction In this chapter, an overview of the concept of climate change and its causes and the effect of this phenomenon on natural resources and
Thesis for obtaining a master's degree in the field of civil engineering, oriented towards soil and foundation mechanics, Shahrivar 2013 Abstract Dams are always considered as infrastructure structures
Dissertation for the Master's Degree (M.A) in Finance, Winter 2013 Abstract: In this research under the title « Investigation of human resource management on the financial performance of Melli Bank branches » that d
Thesis for receiving the M.A. degree. State management summer 2013 abstract: Strategic thinking is important to see something that others don't see, to discover a hidden need
In order to receive a master's degree in civil-soil and soil engineering in March 2013, abstract, different methods are used to stabilize pits, among them nailing method and ink method.
Thesis for receiving a master's degree in the field of civil engineering with structural orientation in February. 2013 Abstract: In recent years, significant progress has been made in the field of improvement and resistance
Doctoral dissertation in civil engineering – Earthquake Engineering 2013 Abstract The inappropriate performance of columns in concrete buildings designed and built in the past years causes concern and attention to the amount of A