Download more than 100 examples of thesis, proposal and project topics about reinforcement of reinforced concrete structures in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Dissertation for obtaining a master's degree in civil engineering, structural orientation, March 2013, abstract of the scope of using FRP materials for shear strengthening of reinforced concrete beams in
Master's thesis in the field of civil engineering, structural orientation. Abstract In this study, the evaluation and comparison of nonlinear and numerical analysis of deep reinforced concrete beams with openings without reinforcement with deep concrete beams with openings reinforced with FRP sheets and deep reinforced concrete beams without openings by Abaqus finite element ...
Dissertation for Master's Degree in Civil Engineering (M.Sc) Orientation: Structure Winter 2013 Abstract: Resilient construction of important government buildings, infrastructure facilities and vital arteries due to the increase
Dissertation for Master's Degree in Civil Engineering, Structures, Abstract: This thesis is the results of a numerical and parametric study on the effect of reinforcing reinforced concrete shear wall with FRP composite and applying the results of the finite element method. The finite element program is compared and calibrated against experimental data. Then, the numerical ...
Master's thesis in the field of civil engineering, structure orientation Alkaline Aggregate Reaction [1] (AAR), is a chemical reaction that occurs in some concrete structures. (AAR) is a reaction between alkaline fluids in the pores and silica aggregates. Concrete failure, including expansion and cracking due to the alkaline reaction of aggregates, is of particular importance. ...
Dissertation for receiving a master's degree in the field of civil engineering, structure orientation. Abstract: Today, many reinforced concrete structures that are in operation are more than 75 years old and have been damaged due to natural disasters such as earthquakes and wind, or due to material fatigue or corrosive factors. Maintenance of structures is very important due to ...
Dissertation for receiving the master's degree ""M.Sc"" orientation: abstract structure In today's reinforced concrete buildings, the use of interframe separators is very common. Intermediate frames with building materials are the main types of separators that are used in this type of buildings. In previous research, these interframe separators are usually considered as ...
Dissertation for receiving a master's degree in the field of Civil Engineering (M.Sc) Major: Structure Abstract: The retrofitting of important government buildings, infrastructure facilities and vital arteries due to the increase in terrorist attacks around the world and the possibility of bombings near buildings and urban places is one of the most important discussions in the ...
Summer 1390 Expertise Master of the field: Civil Engineering Orientation: Structure Abstract: In this thesis, the effect of nanosilica on the mechanical properties and durability of concrete containing polypropylene fibers
Master's Thesis in Civil Engineering - Earthquake Engineering March 2012 Abstract Reinforced soil is a special material that is created from the combination of soil and reinforcing member. Arming components resistant to N
Dissertation for receiving a master's degree in the field of civil engineering with a focus on soil and foundation. Abstract: The compressibility behavior of soils has become an important concern in geotechnical engineering. As buildings, embankments and roads are implemented, significant settlements often occur. Since long-term settlements occur due to creep, therefore, the ...
Dissertation for Master's Degree in Civil Engineering with Earthquake Orientation Abstract: Semi-rigid joints [1] are joints whose hardness is between the two states of grip and joint and transmit a part of the anchor, in other words, its degree of rigidity is between 20% and 90%. In this thesis
Education Level: Master's Degree, Field: Civil Engineering, Major: Structures Abstract: In this thesis, the effect of nanosilica on the mechanical properties and durability of concrete containing polypropylene fibers was investigated. Polypropylene fibers with a length of 18 mm and a ratio of length to diameter of 0.9 mµ were used. The effect of fibers and nanosilica in three ...
Mechanical Engineering Master's Thesis Proposed Design - Introduction The use of fibers in concrete started about 50 years ago and day by day their use in various fields has increased. Adding fibers to the mixing design improves the mechanical properties of concrete and the behavior of the structure after cracking. It also increases the softness and malleability of the section. ...
Thesis for receiving a master's degree in the field of civil engineering with structural orientation in February. 2013 Abstract: In recent years, significant progress has been made in the field of improvement and resistance
Master's thesis in the field of civil engineering, structural orientation. Abstract: Investigating the effect of span length on bridge behavior under the simultaneous effect of horizontal and vertical components. Among all types of structures, bridges are one of the pillars of vital arteries that need to be used after an earthquake to provide access to hospitals, fire stations, ...
Master's Thesis in Civil Engineering-Earthquake Abstract Using braces as a lateral resistance system in steel structures is one of the most common methods to withstand the forces caused by earthquakes. One of the weak points of this system is the compression resistance of the bracing member and its buckling as a result of reducing the member's load. Today, this problem has been ...
Expert thesis Master of Civil Engineering, Structural Orientation, September 2013 Abstract Today, with the progress of science in the construction industry, many methods have been presented to improve reinforced concrete structures
Dissertation of master's degree in civil engineering, structural orientation, October 1390, first chapter of generalities. 1-1 Introduction In recent years, there have been many advances in the field
The effect of fiber and pozzolanic materials on the mechanical properties of glass fiber reinforced concrete Master's Thesis of Civil-Structural Engineering Abstract The failure and destruction of concrete is highly dependent on the formation of cracks and microcracks. With increasing loading, microcracks are connected and form cracks. In order to solve this problem and also to ...
Dissertation for Master's Degree Abstract: Dealing with external forces such as earthquakes is one of the most important missions of civil engineers. In order to achieve this goal, the light metal frame system, which has advantages such as the possibility of industrial production, prefabrication and lightness, can be considered as a suitable alternative to traditional systems. ...
Master's Thesis in Civil-Structural Engineering Today, domes and arches have found wide applications in architectural and industrial structures due to their suitable coverage of large openings. The use of today's technologies in styling and optimizing energy consumption in these types of structures is one of the important challenges facing engineers. Therefore, the need to ...
Master's thesis in the field of structural civil engineering Abstract: Steel-reinforced concrete is a material that is widely used in civil engineering structures due to reasons such as suitable compressive strength, low cost of preparation and availability of raw materials. But reinforced concrete prepared from cement paste, ordinary aggregates, and steel rebars has weaknesses ...
Doctoral dissertation in civil engineering – Earthquake Engineering 2013 Abstract The inappropriate performance of columns in concrete buildings designed and built in the past years causes concern and attention to the amount of A
Master's Thesis in Civil-Structural Engineering Abstract In order to estimate the capacity of buildings, it will be much easier and less expensive to use static methods instead of incremental dynamic methods. Although the incremental dynamic method gives more accurate and closer answers to the real behavior of the structure, its high cost and time has increased the desire to use ...
Dissertation of Master's Degree in Civil Engineering - Structure Abstract In metal structures, one of the most important places of stress concentration is the joint. In form cutting, the shear force at the connection point is so high that a part of the beam or its reinforcement is broken and separated in pieces, and this is due to negligence in the design of the connection or ...
Master's Thesis in Civil Engineering, Earthquake Orientation Abstract: Bridge structures are affected by various loads and are designed according to the level of risk that is considered for them. Explosive loading is one of the loads that threaten the health of bridges. It is necessary to evaluate the amount of damage and performance of bridges under the effect of this loading ...
Dissertation for receiving a master's degree in the field of structural oriented civil engineering, 2013, although the construction and design methods of structures have expanded over the years, but still the effect of earthquakes is one of the most important.
Dissertation for master's degree in civil-structural field winter 2012 Abstract In recent years, the number of buildings that have suffered damage due to the loss of their gravity-bearing members has increased. Therefore, it has become important to design structures so that they are resistant to progressive damage in addition to the effects of earthquakes. One of the factors ...
Dissertation for M.Sc degree in soil and soil mechanics engineering, summer 2013, first chapter, introduction of micro candles 1-1 Micro-candles in general in dealing with problematic soils
Master's Thesis (M.sc) Civil Engineering, Soil and Foundation Mechanics Abstract In this research, the stability of soil reinforced with geogrid located on an underground cavity was analyzed using plaxis software, and the effect of several factors such as the number of geogrid layers, the length of the geogrid layer, the stiffness of the geogrid layer, the optimal location of ...
Dissertation for Master's Degree in Civil Engineering, Structural Orientation Abstract: Today, due to the increasing space limitations and economic savings, it is inevitable to use diagonal bridges to avoid lengthening the route and increase road safety. The diagonal issue of the bridge will cause a different and sometimes complex behavior in the bridge under the effect of the ...
Civil Engineering Master's Thesis - Soil and Foundation Mechanics Abstract From the past until now, one of the most economical methods to improve the mechanical properties of clay soils has been stabilization by means of additives such as lime and cement in construction projects such as road construction and consolidation of building foundations. Also, with the passage of time ...
Dissertation for receiving a master's degree (Sc..M) field: civil engineering, specialization: structure, abstract: In recent years, the subject of seismic isolation has been particularly focused on the seismic design of buildings. The main purpose of this work is to isolate the structure from the ground instead of using conventional retrofitting methods The equipment used in ...
Civil engineering, soil and foundation, abstract, considering that all engineering infrastructures and vital urban and non-urban places and arteries such as: foundations of buildings, bridges, silos, dams, retaining walls, marine structures, industrial facilities, etc. . . All spread on a platform called the earth. The importance of investigating the type of instability in ...
Master's Thesis of Polymer Industry Engineering Abstract Phenolic resins have excellent dimensional, thermal, chemical and corrosion resistance. Also, the fugitives produced during the thermal degradation of this resin have low toxicity and, in addition, they have high charring. Phenolic resins, due to having desirable properties, are used in many fields such as internal parts ...
Dissertation for Master's Degree > Direction: Hydraulic Structures Abstract: One of the assumptions that is made to simplify the dynamic analysis of the existing weighted concrete dams is the uniformity of the foundation in terms of physical parameters such as modulus of elasticity and damping. This is despite the fact that, in practice, different geological conditions may ...
Master's thesis in the field of civil engineering, structure orientation. Abstract: In this study, the effect of some effective parameters on the strength of polymer concrete based on epoxy resin, including hardener, filler, and solvent, has been investigated. Rice husk ash and broom stalk ash were used as fillers and acetone-toluene mixture with a ratio of 50-50% was used as a ...
Dissertation for Master's Degree in Information Technology Management, Information Systems, Abstract The Imam Khomeini (RA) Relief Committee, as one of the popular institutions, in drawing its basic policies, emphasizes support, cooperation and popular participation, and on this basis, it considers the attraction of popular aid as a mechanism for guiding popular participation ...
Dissertation for master's degree in civil engineering, structural orientation. Abstract Good bond strength between the old and new concrete surface is a key factor in the performance of concrete repairs. The purpose of this thesis is to investigate and evaluate the bond strength between the surface of the old concrete and the added concrete. In this thesis, a laboratory research ...
A master's thesis in the field of civil engineering - hydraulic structures Abstract Liquid storage air tanks are used not only to store water, but also to store chemicals and toxic substances in different forms. Considering the use of these structures in civil and urban development and industrial networks, their importance is determined before and after the earthquake. The ...
Master's thesis in the field of mechanical engineering (applied design trend) Abstract of the study of the deterioration of non-isotropic TWB sheets under the hydroforming process. During the research, four different metals of aluminum alloys 6111-T4, 5083-H18, 5083-O and dual-phase steel DP590 and two spherical tensile tests and simple uniaxial tensile tests were used. Then we ...
Master's Thesis in Civil Engineering - Earthquake Engineering 1391 Abstract Structures with frames with coaxial braces are among earthquake resistant systems. These structures are widely
Dissertation of master's degree in civil-structural engineering Abstract: Divergent bracing frames are considered earthquake-resistant systems for steel structures. These braces are from my difficulty
Thesis for receiving the degree of M.Sc. Trend: soil and soil in February 2013 Abstract: Allowed load capacity or safe load capacity is a virtual pressure that is within the range of
1.Introduction Life skills and problem solving are a set of abilities that provide the basis for the adaptation of positive and useful behavior. This ability enables a person to accept his personal and social responsibilities, without harming himself and others, and can effectively face the demands, expectations and problems of daily interpersonal relationships and in this way ...
Dissertation for the Master's degree ""M.A"" Major: Educational Psychology Farsi Abstract The purpose of this study was to determine the relationship between parenting methods and personality traits with resilience in adolescence. The statistical population of the research was female secondary school students of one Khorramabad district in the academic year of 1392-1393. The ...
Master's thesis (educational psychology major) The effect of teacher's feedback (written and verbal) in formative evaluations on self-efficacy and the level of use of self-regulation learning strategies of male and female third year middle school students Abstract: The purpose of this research is to investigate the effect of teacher feedback (written and verbal) in formative ...
Dissertation for Master's Degree in Remote Sensing and Geographical Information System Abstract Large and active faults located in the east of Minab city are considered to be one of the most important tectonic factors in the region, which have caused numerous and severe earthquakes in the past years, and their activity may cause heavy damages in the future. Therefore, the city ...
Dissertation for Master's degree (M.A) Major: Painting Abstract: As the urban space becomes more compact and tangible, disorder and lack of visual identity occur more, and the adverse consequences of the urban patient's face, lack of ease in sending and receiving visual messages from the environment, subsequent stimulation and mental exhaustion and deprivation of peace, lack of ...
Master's Thesis in Media Management Abstract Knowledge creation or knowledge management consists of a range of strategies and implementation patterns that are used in an organization to identify, create, present, differentiate and enable acceptance of insights and experiences. Such insights and experiences form knowledge that can be found in individuals or in organizations as ...
In order to obtain a master's degree in the field of civil engineering - soil and foundation orientation, Abstract Nowadays, circular foundations are more or less used for structures, especially structures that have axial symmetry. In this research, a numerical study was conducted on bearing capacity and settlement of annular foundation. PLAXIS software was used for modeling. ...
Dissertation for Master's degree (MA) Persian Abstract: Modern business requires appropriate tools and infrastructures to expand economic processes. When we talk about the link between information and communication technology and various affairs, the link between information and communication technology and banking is one of the most tangible and obvious points that comes to ...
Dissertation for Master's Degree in Civil Engineering, Soil and Foundation Mechanics Abstract: Since many structures are built in dense urban areas, there is an increasing need to build buildings and geotechnical structures on soft clay soils. Clay soils usually show significant creep deformation. Although a lot of research has been done on the creep behavior of natural clay, ...
Master's Thesis in Civil-Soil Field Abstract Dense clay layers are used as one of the most common impermeable layers in most geotechnical structures such as earthen dams and municipal and radioactive waste disposal centers. Due to special geotechnical characteristics, these layers are damaged by cracking during their lifetime, these cracks increase the permeability of the layer ...
Master's thesis in the field of civil engineering, soil and foundation, today, due to the progress of the tunneling industry, the need to analyze and design underground structures in rocky environments is felt more than in the past. Although there are many numerical and practical software available in this field, none of them are complete and perfect in all fields, and each of ...
Dissertation for Master's Degree in Civil Engineering - Abstract Hydraulic structures in high dams of spillways, as one of the dependent hydraulic structures, have the important role of discharging the incoming floods into the dam reservoir with sufficient safety in free flow or under pressure downstream. In tunnel overflows where the flow is at a high speed and often under ...
Dissertation to receive M.Sc degree in civil engineering, structural orientation. Abstract: One of the ways to strengthen the building against lateral loads is the use of a wind system (convergent or divergent). The increasing use of steel braces to deal with earthquake forces requires that the seismic performance of these types of systems be given more attention. The common ...
Abstract: Hydraulic jump is one of the amazing hydraulic phenomena that consumes the kinetic energy of water. Hydraulic structures such as relaxation ponds mainly use this important property of hydraulic jump to consume energy downstream of overflows, rapids and valves. The dimensions of these structures are directly dependent on the characteristics of hydraulic jump, therefore, ...
Master thesis M.Sc. Discipline: Civil Engineering, Orientation: Hydraulic Structures. Abstract River containment is generally done by dams and similar structures. The flow passing through these structures has a significant potential for erosion and scouring of susceptible beds. Relaxation ponds are designed and built mainly for the purpose of depleting flow energy and ...
Master's thesis in the field of civil engineering, soil and foundation, in this research, the bearing capacity of the conical pile group and the cylindrical pile group with the same volume are calculated and compared. Due to the lack of numerical studies and modeling by software for conical piles compared to laboratory tests in this field, in this research, the modeling of the ...
Dissertation for receiving M.SC Master's degree Major: Water Engineering Abstract: Dams are the largest man-made structures. Their design often stems from their unique nature and the consequence of failure, which is certainly greater than the collapse of other types of structures. The stability of dam body and foundation structures can be analyzed and checked in various ways. ...
Master's thesis in the field of road, building and environmental engineering - hydraulic structures. In this research, the effect of geobags on the scour control of bridge piers has been studied using Computational Fluid Dynamics (CFD) method. Geobags are geotextile bags that are filled with materials such as sand, concrete or materials from river dredging. Due to the ...
Chemical Engineering Master's Thesis Abstract: In this research, a method for the synthesis of ZSM-5 nanozeolite was presented. Then this nanozeolite was modified with CTAB surfactant and its characteristics were investigated using XRD, FT-IR, and SEM methods. This nanozeolite was used to prepare a modified carbon paste electrode (SMNZ/CPE) to measure sulfate anion. Also, the ...
Master's Thesis of Polymer Science and Technology Engineering Abstract Urethane-acrylate resins are of interest due to their low viscosity and flame retardant properties and relatively easy curing. On the other hand, natural fibers with renewable resources, low price, low density and high special properties have a special ability to be used in composites. However, their ...
Dissertation for a master's degree in civil engineering, soil and foundation mechanics. Abstract: Since many structures are built in dense urban areas, there is an increasing need to build buildings and geotechnical structures on soft clay soils. Clay soils usually show significant creep deformation. Although a lot of research has been done on the creep behavior of natural clay, ...
Dissertation to receive a master's degree in mechanical engineering in the field of construction and production. Abstract: The growth and expansion of cities and the development of urban life require up-to-date and expandable infrastructure. Transportation systems are among the basic infrastructures in cities, among which the creation and development of subway networks is of ...
Dissertation for Master's Degree in Rock Mechanics Introduction Excavations made in rocks have different dimensions according to their purpose and vary from small dimensions to dimensions comparable to huge concrete structures. Surface excavations can be used as a space for extracting mines, creating buildings, and supporting and overflowing dams, factories, power plants, as ...
Dissertation for Master's Degree in Mechanical Engineering Field: Applied Design Abstract In this thesis, stability analysis of composite beam reinforced with carbon nanotubes on elastic support under axial force is investigated. The distribution of nanotubes is assumed to be uniform[1]. To determine the properties of materials reinforced with nanotubes, the results of molecular ...
Dissertation for obtaining a master's degree in civil engineering. 2013 Winter Earthquake Abstract of earthquakes close to the fault due to having pulse type movement with a long period at the beginning of the record, including
endname? Rasht Master's Degree: Civil Engineering (M.S.C.) Focus: Hydraulic Structures Academic Year 2011-2012 Summary of the Minab River, the most important river of Khan? The fresh water is in Hormozgan province. this river
Dissertation for obtaining a master's degree in civil engineering – Spring 2014 structure trend, first chapter, general research 1-1- Introduction: Mostly structures for severe earthquakes and surface acceptance
Thesis for the M.Sc degree in wood and paper industry engineering, Mehr 2013 Abstract: In this research, the physical and mechanical properties of nanocomposites obtained from cellulose nanofibers and poly polymers
Abstract: In this study, the relationship between ownership concentration, company performance and dividend policy in companies listed in the food and pharmaceutical industries of the Tehran Stock Exchange has been examined. The statistical sample of the research includes 44 companies during the period of 1380 to 1387. The chosen approach for hypothesis testing is the ...
Dissertation for receiving a master's degree, specialization: accounting, abstract: the theory of capital structure presents two competing models for the financing decisions of joint-stock companies. The parallel model and the preference model. In the parallel model, companies identify the optimal leverage by establishing a balance between the benefits and the costs of debt. For ...
Dissertation for receiving a master's degree, orientation: accounting. Abstract In this research, we have examined the relationship between dividend policy and productivity. The intended research is an applied research. In terms of the type of research design, it is retrospective in order to rely on historical information, and its inference method is inductive and correlational. ...
Dissertation for Master's Degree (M.A.) Direction: Accounting Abstract Competition in the product market has a significant impact on the investment of companies and operational decisions and theoretically indicates the upper and lower limit of investment in an economic enterprise. This will result in adverse consequences such as decreasing market efficiency, increasing ...
The thesis for receiving a master's degree (M.A) in the field of accounting, the abstract quality of profit from various aspects including (having predictive value, feedback value, neutrality, timeliness and honest expression) has been evaluated and considered by researchers. The purpose of this research is to examine the relationship between some corporate governance mechanisms ...
Dissertation for Master's Degree (M.A.) in Information Systems Management Abstract: The purpose of this research is to investigate the effect of using e-government on improving accountability in the government offices of Malekan city. For this purpose, a main hypothesis and five sub-hypotheses were designed. The statistical population of this research is all the referents of the ...
Obtaining a master's degree in the field of electrical engineering, electronics, abstract, mechanization of tools is one of the most important and extensive fields used in production processes. Due to the complexity and uncertainty of machining processes, recently soft computing techniques [1] based on physical models have been preferred to predict the performance of machining ...