Download more than 43 examples of thesis, proposal and project topics about reactor in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Master's thesis in the field of chemical engineering (simulation and process control) abstract design of the control system for the fluidized bed reactor for the production of linear light polyethylene of the LLDPE unit of Jam Petrochemical under the license of Basel and Spherilene technology with an annual production capacity of 300,000 tons of product is one of the largest ...
Master's thesis in the field of chemical engineering, abstract of simulation and optimization of biological reactor producing butanol, semi-continuous fermentation is an efficient and beneficial method to produce valuable metabolic products such as biofuels. Mathematical modeling of semi-continuous bioreactors is a very difficult and complex issue due to the transitory and ...
Dissertation for Master's Degree in Chemical Engineering, Biotechnology, Abstract: Microbial proteases are among the most important hydrolyzing enzymes, which account for 60% of the global market of industrial enzymes. In this research, synthesis of protease enzyme in solid state fermentation process using Bacillus bacteria. licheniformis was investigated. Various agricultural ...
Master's thesis in the field of chemical engineering without major. Abstract: Modeling, simulation and optimization of Jam Petrochemical Check Bed Reactor for hydrogenation of 1 and 3-butadiene. Therefore, a suitable kinetic model has been selected as a basic structure for modeling the reactor, and after that the presented model has been developed in order to match the molar ...
Master's thesis in the field of chemical-biotechnology engineering Abstract Protozoan protein refers to the protein obtained from the cultivation of bacteria, yeasts, filamentous fungi or algae, which can be used as human food or animal feed. In fact, protozoan protein is the dried cells of microorganisms that are obtained by their fermentation on different substrates. ...
Master's Thesis on Simulation and Process Design Abstract So far, many methods have been presented to remove phenol from wastewater, among them, the membrane bioreactor process has received attention in the last decade. The use of hollow fiber membrane contactor in this process is to avoid direct contact between two phases and increase the surface-to-volume ratio. In the current ...
Dissertation for M.Sc. Electrical Engineering - Control Abstract Considering the high consumption of petrochemical products in the world today and Iran's high potential for the development and supply of petrochemical feedstock, petrochemical complexes are of special importance. Therefore, one of the important reactions called acetylene hydrogenation has been investigated and ...
Dissertation for obtaining a master's degree in civil engineering, structural orientation, March 2013, abstract of the scope of using FRP materials for shear strengthening of reinforced concrete beams in
To receive a master's degree in textile technology engineering. Abstract In the previous research, multi-sized nano-roughness was developed using nanoparticles with different sizes and different surface charges along with silicone resin coating to produce multi-purpose textiles with stable properties. In this research, the idea of ??using laser irradiation and finishing textiles ...
Dissertation for Master's Degree in Civil Engineering Majoring in Environmental Engineering Abstract In this research, the effect of biological reactions on the removal of organic substances in wastewater during transfer from production sources to the treatment plant in conventional networks and new small diameter networks was investigated. For this purpose, a part of these ...
Master's thesis in the field of civil engineering (environmental engineering) is an abstract of the surface absorption method, one of the effective methods for removing metals, including nickel metal. In this research, modified rice paddy has been used as absorbent material. Since this adsorbent is a natural material with a high contact surface, in addition to its high ability ...
Dissertation for Master's Degree in Civil Engineering, Structures, Abstract: This thesis is the results of a numerical and parametric study on the effect of reinforcing reinforced concrete shear wall with FRP composite and applying the results of the finite element method. The finite element program is compared and calibrated against experimental data. Then, the numerical ...
Dissertation for receiving a Master's degree (M.Sc.) specialization: Environment Abstract Gaseous liquids obtained from the refining of sour gases are also sour and contain a large percentage of hydrogen sulfide and mercaptans. Therefore, after distilling and preparing the products, it needs refining processes to remove or reduce the amount of sulfur and mercaptans present. ...
Dissertation to receive the master's degree ""M.Sc. Orientation: ""Biochemical Engineering"" Abstract: The presence of sulfur compounds in gasoline creates a serious problem in air pollution, environment, corrosion of equipment and destruction of human health. The new environmental standards also impose strict limits on the amount of sulfur and aromatic compounds in gasoline. ...
M.Sc. Dissertation for Master Degree in Chemical Engineering - Process Engineering Abstract Mercaptans are removed from hydrocarbon streams by various methods. The use of caustic soda solution and mucoli sieve beds are among the most widely used methods. In the oil and gas industries of our country, washing with relatively dilute caustic solution is often used to remove light ...
Master's Thesis in Chemical Engineering, Thermodynamics and Kinetics Abstract: A major part of the final properties of the product in emulsion polymerization is determined by the particle size distribution. In this project, an accurate model based on population balance equations (zero-one model) which includes the phenomena of nucleation and particle growth has been chosen to ...
Dissertation of the Ph.D course in Chemical Engineering, Biotechnology, Abstract: Clostridium Langali is a highly anaerobic estogenic bacterium that can grow on synthesis gas components, i.e. CO and H2/CO2, and convert them into ethanol and acetate at ambient temperature and pressure. During this process, the bacterium shows a complex metabolic pathway that includes both ...
Doctoral Dissertation in Chemical Engineering-Biotechnology Abstract The purpose of this study was to produce polyhydroxyalkanoate biopolymer using glucose, fructose, molasses and whey carbon sources by microorganisms Azohydromonas lata DSMZ 1123, Azotobacterbeijerinckii DSMZ 1041, Cupriavidus necator DSMZ 545, Hydrogenophaga pseudoflava DSMZ 1034. In the first stage, to screen ...
Persian summary: Coumarin derivatives are of great interest due to their biological importance and medicinal activities. A number of coumarin derivatives, especially biscoumarins, are known to be anti-inflammatory due to their numerous and prominent features such as anti-blood clots. In this regard, one-pot synthesis of biscoumarin derivatives using aromatic aldehydes, ...
Dissertation for obtaining the master's degree ""M.Sc."" (Chemical Engineering - Thermodynamics and Kinetics) Abstract: Keywords: Computational fluid dynamics, bubble, continuity and failure, floating bed reactors, multiphase systems, vertical vertical flows, PBM, DQMOM, recently liquid gas floating bed reactors have received attention due to their wide application in chemical, ...
Dissertation to receive master's degree in organic chemistry Keywords: Farsi: Besparash, condensation, composite, nanocomposite, anchoring Nitrogen in bonding with metals can destroy them
Dissertation to receive a master's degree in the field of chemical engineering, thermokinetic orientation. Abstract With the increase in the use of fuel cells in the industry and as an on-site application, there is a need to develop production units on the site of hydrogen. In this research, a monolithic catalytic reformer in which autothermal reforming of methane takes place is ...
Master's Thesis in the field of Nano Chemical Engineering Abstract Removal of phenol from industrial effluents using nanotechnology In this research, the photocatalytic removal of phenol as a model of organic pollutant in a fluidized bed reactor under ultraviolet and visible radiations has been studied. The effects of important parameters such as pH, catalyst concentration, ...
Master's thesis in the field of chemical nanoengineering Abstract: Fabrication of ceramic nanofiltration membrane for chloride ion separation (case study: gas condensate) In this research, chloride ion separation using alumina-titania double layer nanofiltration membrane has been investigated. For this purpose, first, the alumina-titania double-layer membrane is made based on ...
Master's thesis in the field of chemical engineering. Abstract of the laboratory study of cadmium removal from drinking water. Today, the pollution of natural waters with heavy metals has caused concern in many countries of the world due to the destructive effects it has on living organisms. Cadmium enters drinking water through sewage and erosion of mineral rocks and effluents ...
Master's Thesis in Electrical Engineering, Power 1-1 Introduction Energy supply sources in the last few decades have been from fossil sources, which until recently have been obtained almost cheaply. Cheap energy sources caused that the optimal use of energy and energy recycling were practically not paid much attention. Due to the energy shortage crisis and the sense of danger ...
Dissertation for M.Sc. Degree: Food Industry Abstract: Pectinases are a group of hydrolytic enzymes that break down pectic substances. Exopolygalacturonase (exo-p) and endopolygalacturonase (endo-p) are two types of this group. In this study, two fungal species, namely Aspergillus niger and Vetrichodermarisi, which were able to produce pectinase, were isolated. The results of ...
Dissertation for M.Sc. Chemical Engineering-Environmental Engineering Abstract: Microbiological fuel cells (MFC) are considered as one of the important potentials in providing clean and renewable energy in the future. In addition to providing electrical energy, which is the most widely used and flexible among other types of energy, MFCs not only do not cause the slightest ...
Dissertation for Master's Degree (M.Sc) Direction: Applied Chemistry Persian Summary According to international standards, the sulfur in the fuels used in the transportation industry, as one of the most important polluting industries, should be reduced to about 10 ppmw, while many refineries in the world produce fuels with a sulfur content of more than 1000 ppmw. One of the new ...
Dissertation for receiving the master's degree ""M.Sc."" Electrical engineering field - control trend. Abstract: One of the effective methods that has attracted the attention of electricity authorities in recent decades is the use of existing lines to build new lines with higher voltage. It is natural that with the increase in voltage, the width of the boundary on both sides of ...
Master's Thesis in Polymerization Engineering Abstract In this research, the thermal and catalytic pyrolysis of four types of polymers such as heavy polyethylene and polypropylene and two styrene butadiene rubber and polybutadiene rubber in a semi-continuous stirred reactor under nitrogen gas and using HZSM-5, FCC and H-Mordenite catalysts has been investigated. In this study, ...
Dissertation for Master's Degree (M.Sc.) Orientation: Environment Abstract Based on the studies conducted, there are various processes for desulfurization of naphtha, which determine the method of desulfurization of naphtha, there are very determining parameters, and the type of sulfur compounds and operating temperature and pressure are one of the most important parameters that ...
In order to obtain a master's degree in the field of mechanical engineering, energy conversion, abstract: In this thesis, the mass and heat transfer by integral method in the flow of natural displacement of a fluid with a very low frontal near the wavy inclined wall and under the magnetic field has been investigated. The wall is permeable and as a result, the fluid can be sucked ...
Master's Thesis, Energy Conversion, Abstract: In this project, we will numerically investigate a stable gas flow in a microchannel with a rectangular cross-section. The flow with a certain temperature enters the channel with a constant temperature wall. Momentum and energy equations are discretized and solved numerically. Discretization has been done by FVM method and ...
Master's thesis in the field of mechanical engineering - energy conversion trend Abstract: In this research, the turbulent flow of a non-Newtonian nanofluid in a microchannel with a circular cross-section is simulated. First, the types of classification of microchannels, the methods of making microchannels, as well as the advantages and challenges of using microchannels are ...
Dissertation for M.Sc Mechanical Engineering - Energy Conversion Orientation Abstract: In this research, the turbulent flow of a non-Newtonian nanofluid in a microchannel with a circular cross-section is simulated. First, the types of classification of microchannels, the methods of making microchannels, as well as the advantages and challenges of using microchannels are stated. ...
Introduction Flexible Power Transmission Networks (FACTS[1]), is one of the aspects of the electronic revolution that is happening in all fields of electrical energy. The concept of FACTS was first proposed in 1988 by Hingorani. In addition to the advantages of fast and reliable switching, the range of semiconductor power devices provides opportunities to value electrical energy ...
Dissertation for M.Sc Master's degree, mechanical engineering-applied design Abstract With the emergence of composite materials, a huge progress was achieved in many engineering applications. Nevertheless, problems such as delamination, stress concentration, and discontinuous distribution of stress, the idea of ??creating a new type of composite materials in which properties ...
Abstract: Research in the field of heat transfer of suspensions with nanometer-sized solid particles in the base fluid has started in the last decade. Recent research in the field of nanofluids has shown that the addition of nanoparticles causes a significant increase in the heat transfer of the suspension. Another common way to improve the thermal performance of devices is to ...
Dissertation for Master's Degree in Mechanical Engineering (Energy Conversion) Abstract In this thesis, the mass and heat transfer of water-aluminum oxide nanofluid in a two-dimensional porous medium under a magnetic field and in the vicinity of a vertical wall has been investigated. The boundary wall can be permeable or impermeable. The concentration and temperature of the wall ...
Master's Thesis on Energy Conversion Abstract: Increasing heat transfer as well as increasing energy efficiency due to the limitation of natural resources and reducing costs has always been one of the most basic concerns of engineers and researchers. This is especially important in fluids due to the small thermal conductivity coefficient. One of the most important ways to ...
To obtain a master's degree in mechanical engineering - manufacturing and production. Abstract: The electric discharge machining process is one of the advanced machining processes, which is one of the important applications of this process. Despite the unique applications of this machining method, low chipping rate, high surface roughness, high tool wear rate and environmental ...
Master's Thesis in Mechanical Engineering (Energy Conversion) Abstract Numerical investigation of the effect of microstructures on heat transfer and fluid mixing in microchannels, the need for high heat transfer from electronic packages and optical systems, etc., has created a challenge in the field of thermal management. In this context, microchannel heat wells play a great ...