Download the thesis about produced water with oil✅ Word Document

Download more than 100 examples of thesis, proposal and project topics about produced water with oil in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.

Number of pages: 140 Category: Biology - Environment

Dissertation for Master's Degree ""M.Sc"" Chemical Engineering - Environmental Abstract Water produced with oil, which contains a mixture of organic and inorganic compounds, is considered as the biggest waste in upstream oil industries. With the increase in extraction from oil and gas reservoirs, the volume of this water is increasing day by day, and its inappropriate discharge ...

Number of pages: 98 Category: Geography - Urban Planning

Dissertation for Master's degree M.se field of remote sensing and geographic information system - water and soil resources Abstract: The phenomenon of dam failure has a catastrophic potential. Therefore, it is important to estimate the hydraulic parameters of flood waves in order to predict risks and manage resources and facilities and save human lives. Therefore, the issue of ...

Number of pages: 121 Category: Chemical - Petrochemical Engineering

Dissertation of the doctoral course in the field of chemical engineering, biotechnology, abstract. Heavy oil transportation by pipeline is one of the most important and suitable methods of transportation, and the high viscosity of heavy oil compounds and their sedimentation in the transportation route is the most obvious problem of this type of transportation. Emulsifying heavy ...

Number of pages: 107 Category: Biology - Environment

Dissertation for M.Sc. Chemical Engineering-Environmental Engineering Abstract: Microbiological fuel cells (MFC) are considered as one of the important potentials in providing clean and renewable energy in the future. In addition to providing electrical energy, which is the most widely used and flexible among other types of energy, MFCs not only do not cause the slightest ...

Number of pages: 44 Category: Agricultural Engineering

Dissertation for Master's Degree (M.Sc) Abstract Chrysanthemum (Chrysanthemum morifolum L.) is one of the most important cut flowers in the world, which today ranks second in the world after roses in terms of economy and cultivation. One of the important problems of this flower is vascular blockage and disruption of the water balance. For this purpose, a study based on a ...

Number of pages: 55 Category: Food and Packaging Industries

The thesis (or dissertation) for receiving a master's degree in the field of food industry, majoring in food chemistry. The abstract of this study is designed to compare the chemical composition and antioxidant effect of laboratory cinnamon essential oil [1] and two commercial essential oils [2]. In order to identify the chemical compounds of the essential oils, a mechanical ...

Number of pages: 0 Category: Facilities - Mechanics

Master's Thesis of Energy Conversion Mechanical Engineering Abstract In recent years, due to the importance of finding energy, global warming and environmental pollution and its production sources, and the growing need of various industries for various forms of energy, as well as the large volume of its consumers around the world, the need to provide models to optimize energy ...

Number of pages: 136 Category: Agricultural Engineering

Dissertation for Master's Degree in Ecological Agricultural Engineering Abstract In order to investigate the effect of waterlogging period and different amounts of phosphorus and potassium on nitrogen biofixation in the vegetative stage (V4) of Soybean cultivar Dipiax (Ketol), a pot experiment was conducted in 2012 at Gorgan University of Agricultural Sciences and Natural ...

Number of pages: 89 Category: Biology - Environment

Master's Thesis in Mechanical Engineering, Energy Conversion, Abstract Due to the lack of fresh water resources, it is of great importance to discover new ways of water production. One of the new methods of producing fresh water in low capacity is the use of air humidity, which is known as condensation water production system. In this method, the flow of hot and humid air is ...

Number of pages: 80 Category: Agricultural Engineering

Dissertation for Master's Degree (M.S) Field: Agriculture Major: Horticulture Abstract Sterilzia regina ornamental plant is a permanent and valuable plant. It is very important to pay attention to the substrate and its cultivation environment. Among the most important factors that should be considered in the cultivation of plants, especially permanent plants, is nutrition and ...

Number of pages: 97 Category: Agricultural Engineering

Abstract: Drought stress is one of the most important factors limiting the growth of agricultural plants, which adversely affects crop yield. One of the methods that have been used in recent years to deal with dehydration and drought stress in many plants is the use of useful microorganisms such as mycorrhizal fungi. Mycorrhizal fungi with extensive hyphal network and increased ...

Number of pages: 105 Category: Management

Master's Thesis in Public Administration - Financial Management, Abstract: In the past years, the trend of electric energy consumption has been increasing due to national growth and development, until the amount of fossil fuels consumed, natural gas and petroleum products, was equal to 385.5 barrels of crude oil in 2013. Of this amount, 306.1 barrels of crude oil have been ...

Number of pages: 145 Category: Textile Industries

In order to receive a master's degree in textile technology, it is essential to know the physical and mechanical properties of carpets to produce a quality product and maintain the proper appearance. In this research, an attempt has been made to provide a model to determine the relationship between the different parameters of these characteristics, therefore, to measure these ...

Number of pages: 131 Category: Civil Engineering

Dissertation for master's degree in civil engineering, structural orientation. Abstract Good bond strength between the old and new concrete surface is a key factor in the performance of concrete repairs. The purpose of this thesis is to investigate and evaluate the bond strength between the surface of the old concrete and the added concrete. In this thesis, a laboratory research ...

Number of pages: 65 Category: Biology - Environment

Master's Thesis of Civil-Environmental Engineering Abstract Garbage is one of the environmental pollutants that cause many problems such as the spread of pollution in water, air and soil and transmission to humans and animals directly or indirectly. Today, with the ever-increasing expansion of urban and industrial societies, we are witnessing the widening of the amount of these ...

Number of pages: 78 Category: Physical Education - Sports

Dissertation for Master's Degree Field of Study: Physical Education and Sports Science Major: Sports Management Abstract: One of the strategies that has been recently noticed in most countries of the world is the management and planning for the development of tourism in areas that have the necessary potential to expand this industry. Sports tourism is a branch of tourism that is ...

Number of pages: 79 Category: Food and Packaging Industries

Dissertation for receiving a master's degree, specialization: food industry, abstract of osmotic dehydration, the process of removing water is based on the placement of food materials in a hypertonic solution. In this research, the combination of osmotic dehydration process for carrot pieces with a thickness of 0.5 cm at a temperature of 60 degrees Celsius and time intervals of ...

Number of pages: 96 Category: Chemical - Petrochemical Engineering

Thesis for Master's degree in the field: Chemical Engineering Abstract Today, tea is one of the most popular drinks among the people of the world, especially in Iran, that's why drying tea leaves is essential for long-term storage. In this research, both a tea leaf and a pile of it were examined and dried. Green tea leaves were dried in the temperature range of 35 to 55 degrees ...

Number of pages: 81 Category: Food and Packaging Industries

Dissertation for receiving a master's degree, specialization: food industry, abstract of osmotic dehydration, the process of removing water is based on the placement of food materials in a hypertonic solution. In this research, the combination of osmotic dehydration process for kiwi pieces with a thickness of 0.5 cm at a temperature of 60 degrees Celsius and time intervals of ...

Number of pages: 117 Category: Electronic Engineering

Presented to graduate education management as part of the academic activities required to obtain a master's degree in the field of mechatronics. Abstract As you know, air conditioner is a high consumption device and has a Freon refrigeration cycle. What drew the companies to the production of inverters was to solve the shortcoming of air conditioners in high energy consumption. ...

Number of pages: 147 Category: Chemical - Petrochemical Engineering

A master's thesis in the field of chemical engineering, abstract of the laboratory study and modeling of calcium carbonate production from calcium chloride solution by absorbing carbon dioxide from industrial exhaust gases, by the efforts of Amin Alamdari, the effect of carbon dioxide concentration on the precipitation of calcium carbonate species and the kinetics of calcium ...

Number of pages: 79 Category: Biology - Environment

Master's Thesis in Chemical Engineering Abstract of Electrochemical Analysis of Formaldehyde Formaldehyde is one of the organic chemicals that is widely used as a raw material in many industries. Industrial effluents that contain high concentrations of formaldehyde must be treated before entering the environment due to its possible carcinogenic and mutagenic risks. The purpose ...

Number of pages: 132 Category: Chemical - Petrochemical Engineering

Master's thesis in the field of chemical nanoengineering Abstract: Fabrication of ceramic nanofiltration membrane for chloride ion separation (case study: gas condensate) In this research, chloride ion separation using alumina-titania double layer nanofiltration membrane has been investigated. For this purpose, first, the alumina-titania double-layer membrane is made based on ...

Number of pages: 109 Category: Chemical - Petrochemical Engineering

Master's Thesis, Department of Chemistry, Organic Chemistry, Abstract An effective method for the synthesis of pyrido[3,2-d]pyrimidine derivatives from the three-component condensation of 6-aminouracil, 6-amino2-thiouracil or 6-amino-1,3-dimethyluracil with aryl aldehydes and malononitrile, a class of pyrido[3,2-d]pyrimidine derivatives in the presence of high performance basic ...

Number of pages: 99 Category: Chemical - Petrochemical Engineering

Master's thesis in the field of chemistry, Analytical Chemistry, Abstract In this project, a molecular template polymer was prepared for the selective extraction of furan. To prepare this polymer, methacrylic acid (functional monomer), ethylene glycol dimethacrylate (cross-linking agent), 2,2-azobisisobutyronitrile (initiator), a mixture of pyrrole (furan substitute or target ...

Number of pages: 121 Category: Electronic Engineering

Master of Mechatronics Abstract As you know, the air conditioner is a high consumption device and has a Freon refrigeration cycle. What drew the companies to the production of inverters was to solve the shortcoming of air conditioners in high energy consumption. To improve energy consumption in every part of the industry, one should pay attention to several parameters, it is ...

Number of pages: 126 Category: Biology - Environment

Dissertation for Master's Degree in Chemical Engineering Abstract: Microbial fuel cell biotechnology is a new science, in which microorganisms, as cheap catalysts, convert the chemical energy contained in organic and inorganic compounds into electrical energy. Optimizing parameters affecting battery performance is one of the first laboratory steps towards the development of this ...

Number of pages: 88 Category: Chemical - Petrochemical Engineering

Dissertation for receiving the master's degree ""M.Sc."" Chemical engineering trend, thermodynamic and synthetic engineering Abstract In this study, the modeling of dilute acid hydrolysis of walnut green skin as a sample of lignocellulosic material to produce fermentable sugar in the bioethanol process has been studied. The four parameters of temperature, time, acid ...

Number of pages: 78 Category: Agricultural Engineering

Dissertation for obtaining a master's degree in the field of: Agricultural Engineering, Agricultural Management. Abstract: Rice is one of the major crops of Gilan province and plays an important role in the income of rural households. The amount of rice yield is threatened every year by various factors such as pests, diseases and weeds. Blast disease is one of the most damaging ...

Number of pages: 91 Category: Food and Packaging Industries

Dissertation for receiving a master's degree in the field of agricultural engineering, food science and food industry, food technology. Abstract In this research work, the effect of saponin of Chubak plant on the stability and increase of foam in beer has been done. As we know, the root of Chubak plant is a rich source of saponin compounds, which are the most important and ...

Number of pages: 70 Category: Food and Packaging Industries

Master's Thesis of Food Science and Industry Abstract The purpose of this research was to evaluate the effect of adding capcarrageenan and sodium alginate on the quality characteristics of soy burger during storage time of 60 days at -20°C. For this purpose, cooking characteristics, sensory characteristics, pH, tissue profile analysis were investigated every 30 days. The ...

Number of pages: 200 Category: Biology - Environment

Dissertation for M.Sc., Energy Systems Engineering - One of the most important issues related to the environment in the oil, gas and petrochemical industries is the proper disposal of waste hydrocarbon gases in industrial units and complexes. One of the most common methods available for the safe disposal of these gases is burning them in flares and releasing them into the ...

Number of pages: 56 Category: Agricultural Engineering

Dissertation for obtaining a master's degree in the field: horticulture, ornamental plants. Abstract This study was conducted in order to investigate the effect of nickel on the life after harvesting of gerbera flower in the form of a completely randomized design with three replications. Healthy gerbera flowers (Gerbera jamesonii cv. 'Intense') were purchased from a commercial ...

Number of pages: 154 Category: Biology - Environment

Doctoral Dissertation on Energy Conversion Abstract One of the most important issues in internal combustion engines is heat transfer in them; Because almost a third of the energy produced inside the combustion chamber is removed through engine cooling. The heat transfer of internal combustion engines is important from various aspects, including the protection of materials used ...

Number of pages: 153 Category: Biology - Environment

Master's Thesis in Energy Systems Abstract In recent years, the possibility of using solar energy for cooling and dehumidification has occupied the human mind. Solar absorption cooling systems (Solar Absorption Cycles) have advantages such as not being environmentally dangerous and low energy consumption, especially during electrical peak hours. In addition, since the cost of ...

Number of pages: 49 Category: Food and Packaging Industries

Dissertation for M.Sc degree, major: food microbiology, abstract Sterilized milk products that are prepared by the Faradam method, especially Faradam milk and cream, have opened their place in the diet of Iranian people in recent years. By adding healthy ingredients to products such as breakfast cream, the nutritional value of these products can be improved. In this research, ...

Number of pages: 125 Category: Facilities - Mechanics

To obtain a master's degree in mechanical engineering - manufacturing and production. Abstract: The electric discharge machining process is one of the advanced machining processes, which is one of the important applications of this process. Despite the unique applications of this machining method, low chipping rate, high surface roughness, high tool wear rate and environmental ...

Number of pages: 152 Category: Facilities - Mechanics

Master's Thesis on Energy Conversion Abstract: Increasing heat transfer as well as increasing the efficiency of energy storage systems due to the limitation of natural resources and with the aim of reducing costs has always been one of the most basic concerns of engineers and researchers. This is especially important in fluids due to the small thermal conductivity coefficient. ...

Number of pages: 85 Category: Agricultural Engineering

Dissertation for Master's Degree (M.Sc.) Major: Rangeland Determining the most suitable method of measuring the production of bush plants in the rangelands of Shiraz city (case study: Chashme Anjir rangeland) Abstract From the distant past, humans turned to natural resources to save themselves from the challenge of lack of food against population growth and to seek solutions, ...

Number of pages: 54 Category: Food and Packaging Industries

Dissertation for Master's Degree (M.Sc.) in Agricultural Engineering, Food Science and Industry, Yogurt is the most famous and widely consumed fermented milk product in the world. The most common defect in texture that leads to the non-acceptance of this product by the consumer is water loss. Today, in Iran, condensed yogurt is mostly produced in the reverse way, that is, by ...

Number of pages: 104 Category: Agricultural Engineering

The thesis for receiving the master degree ""M.sc"" in the field of agricultural engineering, agriculture, abstract, with the aim of investigating the effect of organic matter on the growth and yield of potato cultivars, with the aim of producing a pure experimental product in a factorial format, in the form of a randomized complete block design with 3 replications, was carried ...

Number of pages: 52 Category: Agricultural Engineering

Dissertation for Master's Degree (M.Sc) Horticultural Sciences, Flower and Ornamental Plants Abstract In order to investigate the possibility of replacing peat moss with new and inexpensive substrates, a research was conducted using parsley in the form of a completely randomized factorial experiment with 10 treatments and 3 replications. Planting substrates were peat moss, ...

Number of pages: 140 Category: Civil Engineering

Master's thesis in the field of road, building and environmental engineering - hydraulic structures Abstract In this research, nonlinear wave differential equations are solved by the local RBF-DQ numerical method. These differential equations are in the form of Laplace's equation (as a governing equation) and nonlinear boundary conditions on the free surface; The basis of the ...

Number of pages: 84 Category: Agricultural Engineering

Thesis for obtaining a master's degree in the field: agricultural engineering, horticultural sciences, specialization: physiology and breeding of fruit trees. Abstract: Drought stress is one of the most important factors limiting the growth of plants in arid and semi-arid regions of the world, such as Iran. The importance of using water resources and the occurrence of recent ...

Number of pages: 128 Category: Facilities - Mechanics

Abstract: Considering the reduction of underground water resources and fossil fuels in today's world and also in Iran, prevention of energy waste and introduction of new methods in the preparation of potable fresh water from sea water will have a special place in the future world. Using methods such as evaporation-distillation methods can be one of these methods. Due to the high ...

Number of pages: 141 Category: Agricultural Engineering

Dissertation for Master's Degree (M.Sc.) Direction: Watershed Management Abstract Investing in water and soil protection measures requires detailed investigation and design based on recorded experiences and evaluation of the effects and benefits of the measures. To compare water and soil protection measures in different places, it is necessary to have a standard method approved ...

Number of pages: 129 Category: Civil Engineering

Thesis for receiving a master's degree in the field of civil engineering of hydraulic structures, October 2013 This study is to quantitatively evaluate the effects of watershed operations and with the aim of evaluating the efficiency of projects

Number of pages: 100 Category: Civil Engineering

Dissertation for Master's Degree in Civil Engineering – Shahrivar Marine Structures, September 1992 Abstract: Pipe-in-pipe systems are widely used in transmission line applications.

Number of pages: 100 Category: Civil Engineering

Thesis for receiving the degree of M.Sc. Trend: soil and soil in February 2013 Abstract: Allowed load capacity or safe load capacity is a virtual pressure that is within the range of

Number of pages: 184 Category: Geography - Urban Planning

Dissertation for receiving a master's degree in the field: Political Geography (M.A) Abstract: The science of political geography is one of the broad topics of science and is created from a politically organized unit in a specific geographical territory that includes the government's rule and a specific space. These organized units can include the primary political core, limited ...

Number of pages: 58 Category: Geography - Urban Planning

Dissertation for M.A. Orientation: Natural Geography (Geomorphology-Hydrology) Abstract The increasing population growth followed by the development of industrial activities on the one hand and non-compliance with environmental requirements on the other hand, has caused huge amounts of pollutants to enter the environment in the last few decades. Accumulation of some dangerous ...

Number of pages: 58 Category: Geography - Urban Planning

Dissertation for M.A. Orientation: Natural Geography (Geomorphology-Hydrology) Abstract The increasing population growth followed by the development of industrial activities on the one hand and non-compliance with environmental requirements on the other hand, has caused huge amounts of pollutants to enter the environment in the last few decades. Accumulation of some dangerous ...

Number of pages: 226 Category: Art - Graphics

Dissertation for Master's degree (M.A) Chapter 1 Abstract: This research, with the primary purpose of using light and water elements in the design of urban elements, has investigated these elements in the historical period of Iran, and also the design of furniture and urban elements has been examined from the perspective of identity and culture, and an attempt has been made to ...

Number of pages: 273 Category: Management

Dissertation for Master's Degree (M.A.) Major: ""Production and Operations Management"" Thesis abstract (including summary, objectives, implementation methods and results): With the increase in competition in the global trade arena, the way to supply and select suppliers of machinery and spare parts in the supply chain is considered an important challenge for most organizations. ...

Number of pages: 166 Category: Management

Master of Business Administration Abstract The future of the world in the 21st century is full of competition, the development of emerging markets, uncertain environmental factors, the spread of superior technologies and the expansion of business. The condition for success in this field is to take advantage of the strengths and opportunities and face the weaknesses and ...

Number of pages: 106 Category: Civil Engineering

In order to obtain a master's degree in the field of civil engineering - soil and foundation orientation, Abstract Nowadays, circular foundations are more or less used for structures, especially structures that have axial symmetry. In this research, a numerical study was conducted on bearing capacity and settlement of annular foundation. PLAXIS software was used for modeling. ...

Number of pages: 83 Category: Civil Engineering

Master's Thesis (M.sc) Civil Engineering, Soil and Foundation Mechanics Abstract In this research, the stability of soil reinforced with geogrid located on an underground cavity was analyzed using plaxis software, and the effect of several factors such as the number of geogrid layers, the length of the geogrid layer, the stiffness of the geogrid layer, the optimal location of ...

Number of pages: 127 Category: Biology - Environment

Master's thesis in the field of civil engineering (environmental engineering) is an abstract of the surface absorption method, one of the effective methods for removing metals, including nickel metal. In this research, modified rice paddy has been used as absorbent material. Since this adsorbent is a natural material with a high contact surface, in addition to its high ability ...

Number of pages: 96 Category: Civil Engineering

Dissertation to receive a master's degree, specialization: civil engineering-water engineering Abstract: In this research, the effect of land slope, difference in height of pressure booster stations, height above sea level on the characteristics of the length of the water transmission systems in order to verify the feasibility and facilitate the prediction of its use and optimal ...

Number of pages: 187 Category: Civil Engineering

Dissertation for Master's Degree in Civil Engineering, Soil and Foundation Mechanics Abstract: Fine-grained clay soils have always caused problems in construction projects, one of the ways to improve the properties of problematic clay soils is to use lime to stabilize the soil. It swells. this

Number of pages: 109 Category: Civil Engineering

Dissertation for receiving a master's degree in the field of civil engineering with a focus on soil and foundation. Abstract: The compressibility behavior of soils has become an important concern in geotechnical engineering. As buildings, embankments and roads are implemented, significant settlements often occur. Since long-term settlements occur due to creep, therefore, the ...

Number of pages: 115 Category: Civil Engineering

Master's thesis in the field of civil engineering (hydraulic structures) abstract of sediment transfer and sedimentation, the consequences such as the creation of sediment islands in the river path and as a result the reduction of flood flow transfer capacity, corrosion of river structures and It includes other problems. Also, suspended sediments affect the quality of water for ...

Number of pages: 94 Category: Civil Engineering

Master's Thesis in Civil-Soil Field Abstract Dense clay layers are used as one of the most common impermeable layers in most geotechnical structures such as earthen dams and municipal and radioactive waste disposal centers. Due to special geotechnical characteristics, these layers are damaged by cracking during their lifetime, these cracks increase the permeability of the layer ...

Number of pages: 222 Category: Civil Engineering

Master's Thesis on Hydraulic Structures Abstract: Washing water around the existing structures in the flow path is one of the important issues that should be considered in the design of such structures. For this purpose, the investigation of this phenomenon around the circular bases in the condition of clear water was carried out in laboratory physical modeling. For this ...

Number of pages: 102 Category: Civil Engineering

Master's Thesis (Civil Engineering - Water and Wastewater Engineering) Abstract: In this study, ram impact pump modeling was done by the software that was prepared. This software finds the outputs of the HAMMER software as input and by obtaining other information (including the pumping height, etc.) it calculates the amount of pumped water every time the valve is suddenly turned ...

Number of pages: 130 Category: Management

Master's thesis in the field of public administration, human resources orientation. Management is the most important factor in the life, growth and development or death of organizations, and it is undoubtedly the duty of managers to guide the process of moving from the current situation to the desired situation according to the organizational goals. In management, it is ...

Number of pages: 119 Category: Chemical - Petrochemical Engineering

Dissertation for Master's Degree (M.Sc) Major: Applied Chemistry Persian Summary The purpose of this research is to investigate common fatty acids in ostrich oil and determine the amount of retinol in snail secretion to make a cream with therapeutic properties. Since 3000 years ago, the healing properties of ostrich oil have been known to treat wounds, burns, joint pain and skin ...

Number of pages: 140 Category: Civil Engineering

Master's Thesis in Civil Engineering (Soil and Foundation) Abstract Dense sand piles have been used since 1950 in Japan and then in other countries of the world as one of the most effective and economical methods in strengthening soil in order to prevent liquefaction, increase bearing capacity and improve soils with different grain sizes. The process of implementing dense sand ...

Number of pages: 121 Category: Chemical - Petrochemical Engineering

Master's thesis in the field of chemical nanoengineering Abstract The synthesis of silicon dioxide nanoparticles from silicon oil waste using the synthesis method of silicon dioxide nanoparticles [1] has many industrial applications. The industrial use of these particles in traditional fields as well as new fields is expanding, for which new applications are continuously found. ...

Number of pages: 104 Category: Chemical - Petrochemical Engineering

Master's Thesis in Chemical Engineering (Process Simulation and Control) Abstract Modeling and Simulation of the Electrostatic Desalination Process of Crude Oil by Elham Ariafard The aim of this research is to model the desalination process of crude oil based on the population balance method. For this purpose, the one- and two-stage electrostatic desalination process, which ...

Number of pages: 150 Category: Chemical - Petrochemical Engineering

Master's thesis in the field of chemical engineering. Abstract of the laboratory study of cadmium removal from drinking water. Today, the pollution of natural waters with heavy metals has caused concern in many countries of the world due to the destructive effects it has on living organisms. Cadmium enters drinking water through sewage and erosion of mineral rocks and effluents ...

Number of pages: 76 Category: Chemical - Petrochemical Engineering

Dissertation for M.A. degree. ""Trend of Biotechnology"" Abstract Today, due to the reduction of fossil fuel sources and the destructive effects of these types of fuels on the environment, researchers are thinking of replacing them. In recent years, biodiesel fuel is considered the most suitable alternative to diesel fuel due to its renewable nature and less pollution. The ...

Number of pages: 70 Category: Chemical - Petrochemical Engineering

Master's Thesis on Simulation and Process Design Abstract So far, many methods have been presented to remove phenol from wastewater, among them, the membrane bioreactor process has received attention in the last decade. The use of hollow fiber membrane contactor in this process is to avoid direct contact between two phases and increase the surface-to-volume ratio. In the current ...

Number of pages: 63 Category: Biology - Environment

Thesis for receiving a master's degree in the field of chemical engineering, environmental orientation. Abstract: Ethylenediaminetetraacetic acid, due to its ability to solubilize and deactivate metal ions by forming a complex in the aqueous environment, has many applications, especially as a chelating agent for iron fertilizer. The synthesis of this substance is done in ...

Number of pages: 69 Category: Biology - Environment

Dissertation for Master's Degree in Advanced Chemical Engineering Abstract A new method based on point cloud extraction to extract uranium from water samples and its measurement using alpha spectrometry based on liquid scintillation has been investigated. Uranium extraction from water samples in the presence of a number of available surfactants and chelating reagents has been ...

Number of pages: 71 Category: Chemical - Petrochemical Engineering

Dissertation for Master's Degree in Analytical Chemistry Abstract In this study, a new scinometric film method was used to measure dichromate ion in aqueous media using chromophore 1 and 5-diphenylcarbazide (DPC). 5-1-Diphenylcarbazide was used as a complexing agent for the measurement of dichromate ion. As a result of entering dichromate into the structure of the polymer film, ...

Number of pages: 116 Category: Veterinary Medicine

Dissertation: To obtain the degree of professional doctor of veterinary medicine (D.V.M.) Farsi abstract title: Evaluation of the total dissolved solids (TDS) factor in the drinking water of poultry farms in Piranshahr city. Water is considered one of the most important chemical substances in terms of biology and exists in solid, liquid, and vapor forms in nature. Water is one ...

Number of pages: 70 Category: Agricultural Engineering

Thesis for obtaining a master's degree in the field: management, specialization: agriculture. Abstract This research was conducted in order to determine and identify the economic and social effects of watershed management operations in Lesbo area in Rodsar city, as well as to examine the views and opinions of villagers regarding the effectiveness of watershed management ...

Number of pages: 75 Category: Food and Packaging Industries

Dissertation for M.Sc degree in food science and industry Abstract Oils and fats are oxidized during storage at high temperatures and their nutritional quality decreases. The process of oxidation of oils and fats and the formation of free radicals causes the development and development of cancer. These damages can be prevented by consuming antioxidant compounds found in fruits ...

Number of pages: 104 Category: Agricultural Engineering

Master's Thesis in Soil Science Abstract: Today, tracking in water and soil issues has found a much wider application compared to the past. Examining the hydraulic connection and hydrodynamic characteristics of underground water tables, evaluating the origin and spread of pollution are among the most important applications of this method. In our country, along with the ...