Download more than 44 examples of thesis, proposal and project topics about polymerization kinetics in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Master's Thesis in Chemical Engineering, Thermodynamics and Kinetics Abstract: A major part of the final properties of the product in emulsion polymerization is determined by the particle size distribution. In this project, an accurate model based on population balance equations (zero-one model) which includes the phenomena of nucleation and particle growth has been chosen to ...
Master's thesis in the field of chemical engineering (simulation and process control) abstract design of the control system for the fluidized bed reactor for the production of linear light polyethylene of the LLDPE unit of Jam Petrochemical under the license of Basel and Spherilene technology with an annual production capacity of 300,000 tons of product is one of the largest ...
Dissertation for Master's Degree in Chemistry (Applied Chemistry - Polymer) Abstract: Ethylene polymerization was successfully performed in the presence of Phillips catalyst and in the slurry phase. In the continuation of the work, the effect of some effective parameters in polymerization, including the effect of trialkylaluminum, the effect of 1-hexane comonomer, the effect of ...
Dissertation Chemistry for Master's Degree Abstract Acrylic-based pressure-sensitive adhesives are more expensive than rubber-based adhesives, but they have a longer life and resistance to high temperatures, chemicals, UV rays, solvents, light, softeners, and the environment. Modification of acrylic pressure-sensitive adhesives is useful for improving adhesion properties. In ...
Master's thesis in the field of polymerization engineering, abstract was determined by using experimental design methods to determine the optimal feed recipe for the preparation of nitrile rubber. Initially, to determine the factors affecting the rate of polymerization, screening tests were designed according to the Plate-Boorman method, which examines a large number of factors ...
To receive a master's degree in polymer engineering - polymer industries, May 2013 abstract With the progress of various sciences and knowledge, the boundaries of knowledge have converged and in some fields we are witnessing
Master's Degree in Physical Education (Sports Physiology) Abstract Objective: The aim of the research was to determine the time-dependent effect of short-term intense interval training on the dynamics of oxygen absorption in girls. Methodology: For this purpose, 40 female students of Arak University with an average age of 25 ± 5 years, weight 54.30 ± 10.390 kg and height 162.5 ± ...
Master's thesis in the field of civil engineering, structure orientation. Abstract: In this study, the effect of some effective parameters on the strength of polymer concrete based on epoxy resin, including hardener, filler, and solvent, has been investigated. Rice husk ash and broom stalk ash were used as fillers and acetone-toluene mixture with a ratio of 50-50% was used as a ...
Master's thesis in the field of chemistry, chemical physics, abstract In this project, platinum/carbon nanocatalyst was first synthesized by chemical reduction of platinum salt with sodium borohydride chemical reducer. The structural and morphological characteristics of the synthesized nanocatalyst were investigated using energy dispersive spectroscopy and scanning electron ...
Thesis for Master's degree in the field: Chemical Engineering Abstract Today, tea is one of the most popular drinks among the people of the world, especially in Iran, that's why drying tea leaves is essential for long-term storage. In this research, both a tea leaf and a pile of it were examined and dried. Green tea leaves were dried in the temperature range of 35 to 55 degrees ...
Master's Thesis in Nano Chemical Engineering Abstract The aim of this study is to separate cationic polyacrylamide from the waste water of Prodeh Tabas coal washing plant using the polymer membrane filtration process. The primary membrane was prepared using polyacrylonitrile (PAN) by phase inversion process, and then they were prepared using hydrolysis as chemical modification ...
Master's Thesis in the field of Chemical Engineering Abstract Investigation of parameters affecting the production of alumina gel by sol-gel method Sol-gel method is one of the common methods that is widely used to produce different nanoparticles. In this method, a solution of initiators is mixed with water in the presence of a catalyst, and hydrolysis and polymerization ...
Master's Thesis (M.Sc.) Direction: Process Design Abstract Currently, membranes have found a special place in different separation industries and have wide applications in different fields of separation, including liquid solutions and different gases. Membrane technology is one of the most widely used technologies in today's industry, whose field of application is wide ranging ...
Dissertation for Master's Degree (M.Sc.) Field: Gas Processing and Transmission Engineering Abstract: Today, one of the problems in gas transmission lines is the gas hydrate phenomenon, which is a combination of light gases such as methane, ethane or carbon dioxide with water molecules under certain temperature and pressure conditions to form an ice-like substance that contains ...
Master's thesis in the field of chemistry, analysis, abstract. In this research, the synthesis of polymer nanoparticles of ion template using sedimentation method and for the separation and preconcentration of nickel ions from aqueous samples is reported. Nickel template polymer nanoparticles by dissolving stoichiometric amount of nickel nitrate and ligand ...
Master's Thesis of Chemical Engineering Abstract In this research, the optimal absorption conditions for cationic dyes have been investigated and the removal of brilliant green dye [1] by the natural adsorbent of khakshir has been investigated. First, the effective conditions in the amount of brilliant green removal by the khakshir stem adsorbent were researched, then using the ...
Dissertation of the Ph.D course in Chemical Engineering, Biotechnology, Abstract: Clostridium Langali is a highly anaerobic estogenic bacterium that can grow on synthesis gas components, i.e. CO and H2/CO2, and convert them into ethanol and acetate at ambient temperature and pressure. During this process, the bacterium shows a complex metabolic pathway that includes both ...
Master's thesis in the field of physical education and sports sciences, sports biomechanics, abstract: flat feet are among the most common abnormalities. Anatomical abnormalities can change the kinematic variables of the foot joints, which results in a different walking pattern. Identifying the quality and quantity of the variables affected by these anomalies is effective in the ...
A master's thesis in the field of chemical engineering, abstract of the laboratory study and modeling of calcium carbonate production from calcium chloride solution by absorbing carbon dioxide from industrial exhaust gases, by the efforts of Amin Alamdari, the effect of carbon dioxide concentration on the precipitation of calcium carbonate species and the kinetics of calcium ...
Doctoral Dissertation in Chemical Engineering-Biotechnology Abstract The purpose of this study was to produce polyhydroxyalkanoate biopolymer using glucose, fructose, molasses and whey carbon sources by microorganisms Azohydromonas lata DSMZ 1123, Azotobacterbeijerinckii DSMZ 1041, Cupriavidus necator DSMZ 545, Hydrogenophaga pseudoflava DSMZ 1034. In the first stage, to screen ...
Dissertation for receiving the master's degree ""M.Sc."" Orientation: Biotechnology Abstract: Lipases are one of the most important enzymes in biological systems in various industries. The application of free lipase is not cost-effective in industries due to its shorter half-life. Enzyme immobilization on different bases increases stability, repeated use, ease of product ...
Thesis for obtaining a master's degree in organic chemistry. Abstract: Title: Effective three-component synthesis of new 4-aryl-5-(tert-butylamino)-2-(1-methyl-1H-pyrrol-2-yl)furan-3-carbonitrile derivatives. In this research, a direct and efficient method for preparing new 4-aryl-5-aminofuran derivatives through a three-component one-pot reaction ...
Dissertation for M.S.c Master's Degree Orientation: Applied Abstract: In recent years, semi-conducting nanoparticles have attracted a lot of attention due to their electrical and mechanical properties, which result from limited quantum effects compared to their counterpart materials. Among semiconductor nanoparticles, ZnO nanoparticles have higher efficiency. To achieve higher ...
Dissertation for obtaining a doctorate degree in dentistry. Introduction Removing large amounts of dental tissue weakens the restored tooth. The type of restoration and composite method can be one of the influencing factors on tooth fracture resistance under occlusal forces. The purpose of this study was to investigate the effect of using new low-shrinkage composites on the ...
Dissertation for general doctor degree in dentistry Abstract Introduction: One of the common problems after the surgery of the latent third molar tooth is the development of periodontal problems, which manifests itself in the form of a pocket in the distal second molar tooth, loss of connections and lack of adequate bone formation. To solve this problem, various methods such as ...
Dissertation for receiving the degree of Doctor of Dentistry, Dental Materials Research Center Abstract Objective: One of the objectives of this study was to investigate the fracture resistance of the teeth coated with various crown and root restorations. Materials and methods: 60 freshly extracted human premolar teeth were selected and randomly divided into five groups of ...
Master's Thesis in Chemical Engineering Abstract of Electrochemical Analysis of Formaldehyde Formaldehyde is one of the organic chemicals that is widely used as a raw material in many industries. Industrial effluents that contain high concentrations of formaldehyde must be treated before entering the environment due to its possible carcinogenic and mutagenic risks. The purpose ...
Dissertation for obtaining the master's degree ""M.Sc."" (Chemical Engineering - Thermodynamics and Kinetics) Abstract: Keywords: Computational fluid dynamics, bubble, continuity and failure, floating bed reactors, multiphase systems, vertical vertical flows, PBM, DQMOM, recently liquid gas floating bed reactors have received attention due to their wide application in chemical, ...
Master's thesis in the field of chemistry, Analytical Chemistry, Abstract In this project, a molecular template polymer was prepared for the selective extraction of phenylmercury chloride. To prepare this polymer, methacrylic acid (active monomer), ethylene glycol dimethacrylate (cross-linking agent), 2,2-azobisisobutyronitrile (initiator), phenylmercury chloride (target ...
Dissertation to receive master's degree in organic chemistry Keywords: Farsi: Besparash, condensation, composite, nanocomposite, anchoring Nitrogen in bonding with metals can destroy them
Dissertation for Master's Degree in Organic Chemistry Abstract: The new works carried out in this thesis include the condensation reaction of arylglyoxals prepared during the oxidation of acetophenones related to selenium dioxide with 1,2-diaminobenzene, 2,3-diaminomalonitrile, 2,3-diaminopyridine and 4-nitro-1,2-diaminobenzene in order to prepare quinoxalines and the ...
Master's Thesis in the field of Nano Chemical Engineering Abstract Removal of phenol from industrial effluents using nanotechnology In this research, the photocatalytic removal of phenol as a model of organic pollutant in a fluidized bed reactor under ultraviolet and visible radiations has been studied. The effects of important parameters such as pH, catalyst concentration, ...
Master's degree thesis, field: Chemical Engineering Abstract: In this research, the absorption of methyl orange dye, which is one of the most widely used dyes in the textile industry, by polypyrrole adsorbent based on polyvinyl alcohol has been investigated. The tests were performed in a discontinuous system using a colored solution with a concentration of 40 ppm. After ...
Master's Thesis on Simulation and Process Design Abstract So far, many methods have been presented to remove phenol from wastewater, among them, the membrane bioreactor process has received attention in the last decade. The use of hollow fiber membrane contactor in this process is to avoid direct contact between two phases and increase the surface-to-volume ratio. In the current ...
Master's thesis in the field of chemistry, Analytical Chemistry, Abstract In this project, a molecular template polymer was prepared for the selective extraction of furan. To prepare this polymer, methacrylic acid (functional monomer), ethylene glycol dimethacrylate (cross-linking agent), 2,2-azobisisobutyronitrile (initiator), a mixture of pyrrole (furan substitute or target ...
Dissertation for Doctorate Degree in Dentistry Abstract The purpose of this study was to compare the microleakage of adhesive total etch and self etch using three methods of Fluid filtration, dye penetration and dye extraction, as well as to determine the statistical relationship between these three methods. Materials and methods In this laboratory study, 72 extracted human ...
Dissertation for Master's Degree (M.Sc) Direction: Applied Chemistry Persian Summary According to international standards, the sulfur in the fuels used in the transportation industry, as one of the most important polluting industries, should be reduced to about 10 ppmw, while many refineries in the world produce fuels with a sulfur content of more than 1000 ppmw. One of the new ...
Master's Thesis in Polymerization Engineering Abstract In this research, the thermal and catalytic pyrolysis of four types of polymers such as heavy polyethylene and polypropylene and two styrene butadiene rubber and polybutadiene rubber in a semi-continuous stirred reactor under nitrogen gas and using HZSM-5, FCC and H-Mordenite catalysts has been investigated. In this study, ...
Dissertation for receiving a master's degree in the field of preservation and modification. Abstract In this research, the effect of combined modification of colloidal silver-hot water on the heat transfer from the hot press plates to the heart of the beech (Fagus orientalis) chipboard cake, the physical and mechanical properties of the chipboard and the chemical changes of the ...
Dissertation for Master's Degree in Food Science and Engineering, Food Microbiology, Abstract: Today, the increase in environmental pollution and the decrease in oil resources have led to the development and replacement of biodegradable packaging instead of packaging derived from petroleum resources. Also, in this regard, the use of antimicrobial compounds such as silver ...
Abstract This research was conducted in order to investigate the absorption characteristics of cobalt, cadmium and nickel metals using lemon peel. The effect of different parameters such as solution pH, amount of adsorbent, contact time and temperature on the absorption process was investigated and the optimal operating conditions for the absorption of each element on the ...
To obtain a master's degree in mechanical engineering - manufacturing and production Abstract Fuel cells are electrochemical devices that are used to directly convert fuel into electrical energy. One of the most important types of fuel cells is the polymer fuel cell, which is widely used. In general, two types of optimization can be done in the polymer fuel cell: optimization in ...