Download more than 100 examples of thesis, proposal and project topics about polymer fibers in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Summer 1390 Expertise Master of the field: Civil Engineering Orientation: Structure Abstract: In this thesis, the effect of nanosilica on the mechanical properties and durability of concrete containing polypropylene fibers
Master's thesis in the field of civil engineering, structure orientation. Abstract: In this study, the effect of some effective parameters on the strength of polymer concrete based on epoxy resin, including hardener, filler, and solvent, has been investigated. Rice husk ash and broom stalk ash were used as fillers and acetone-toluene mixture with a ratio of 50-50% was used as a ...
Dissertation for Master's Degree in Civil Engineering - Soil and Foundation Mechanics Abstract The purpose of this research is to improve the mechanical and geotechnical properties of windy sand soils. Because one of the major problems of windblown sand is its low resistance under natural and saturated moisture conditions, a laboratory study was conducted to investigate the ...
Dissertation for receiving a master's degree in the field of civil engineering with a focus on soil and foundation. Abstract: The compressibility behavior of soils has become an important concern in geotechnical engineering. As buildings, embankments and roads are implemented, significant settlements often occur. Since long-term settlements occur due to creep, therefore, the ...
Education Level: Master's Degree, Field: Civil Engineering, Major: Structures Abstract: In this thesis, the effect of nanosilica on the mechanical properties and durability of concrete containing polypropylene fibers was investigated. Polypropylene fibers with a length of 18 mm and a ratio of length to diameter of 0.9 mµ were used. The effect of fibers and nanosilica in three ...
Master's Thesis of Polymer Science and Technology Engineering Abstract Urethane-acrylate resins are of interest due to their low viscosity and flame retardant properties and relatively easy curing. On the other hand, natural fibers with renewable resources, low price, low density and high special properties have a special ability to be used in composites. However, their ...
Master's Thesis of Polymer Industry Engineering Abstract Phenolic resins have excellent dimensional, thermal, chemical and corrosion resistance. Also, the fugitives produced during the thermal degradation of this resin have low toxicity and, in addition, they have high charring. Phenolic resins, due to having desirable properties, are used in many fields such as internal parts ...
Master's Thesis on Car Structure and Body Abstract In recent years, many researchers have allocated their attention to a special category of materials, memory materials. The ability to absorb and control vibrations actively or passively, respectively, is affected by the features of shape memory and hysteresis energy loss caused by the pseudo-elastic characteristics of these ...
Dissertation for obtaining a master's degree in civil engineering, structural orientation, March 2013, abstract of the scope of using FRP materials for shear strengthening of reinforced concrete beams in
Dissertation of master's degree in civil engineering, structural orientation, October 1390, first chapter of generalities. 1-1 Introduction In recent years, there have been many advances in the field
Dissertation for Master's Degree in Civil Engineering (M.Sc) Orientation: Structure Winter 2013 Abstract: Resilient construction of important government buildings, infrastructure facilities and vital arteries due to the increase
Dissertation for Master's Degree in Polymer Industry Engineering April 2013 Abstract Nowadays, the topic of energy and energy saving in all fields, even in homes, is one of the most important.
Thesis for the M.Sc degree in wood and paper industry engineering, Mehr 2013 Abstract: In this research, the physical and mechanical properties of nanocomposites obtained from cellulose nanofibers and poly polymers
Dissertation to receive the master's degree ""M.S.c"" specialization: Textile chemistry and fiber science Abstract: One of the important processes in the completion of textile goods is the underhand improvement in textiles. Finishing the softener provides a desirable softness to the fabric and improves its properties, and the main goals of the softener are to reduce static ...
To receive a master's degree in textile technology engineering. Abstract In the previous research, multi-sized nano-roughness was developed using nanoparticles with different sizes and different surface charges along with silicone resin coating to produce multi-purpose textiles with stable properties. In this research, the idea of ??using laser irradiation and finishing textiles ...
Master's thesis in the field of civil engineering, structural orientation. Abstract In this study, the evaluation and comparison of nonlinear and numerical analysis of deep reinforced concrete beams with openings without reinforcement with deep concrete beams with openings reinforced with FRP sheets and deep reinforced concrete beams without openings by Abaqus finite element ...
Dissertation for master's degree in the field of civil engineering, road and transportation, the abstract of asphalt failures is one of the problems that are the concern of road and transportation engineers today, and every year huge costs are spent on the maintenance and repair of asphalt roads. Many efforts have been made to increase the strength and life of asphalt, among ...
In order to receive a master's degree in textile technology, it is essential to know the physical and mechanical properties of carpets to produce a quality product and maintain the proper appearance. In this research, an attempt has been made to provide a model to determine the relationship between the different parameters of these characteristics, therefore, to measure these ...
Master's thesis in the field of civil engineering, structure orientation Alkaline Aggregate Reaction [1] (AAR), is a chemical reaction that occurs in some concrete structures. (AAR) is a reaction between alkaline fluids in the pores and silica aggregates. Concrete failure, including expansion and cracking due to the alkaline reaction of aggregates, is of particular importance. ...
Master's thesis in the field of structural civil engineering Abstract: Steel-reinforced concrete is a material that is widely used in civil engineering structures due to reasons such as suitable compressive strength, low cost of preparation and availability of raw materials. But reinforced concrete prepared from cement paste, ordinary aggregates, and steel rebars has weaknesses ...
Master's thesis in the field of chemical engineering (simulation and process control) abstract design of the control system for the fluidized bed reactor for the production of linear light polyethylene of the LLDPE unit of Jam Petrochemical under the license of Basel and Spherilene technology with an annual production capacity of 300,000 tons of product is one of the largest ...
Dissertation for receiving a master's degree in the field of civil engineering, structure orientation. Abstract: Today, many reinforced concrete structures that are in operation are more than 75 years old and have been damaged due to natural disasters such as earthquakes and wind, or due to material fatigue or corrosive factors. Maintenance of structures is very important due to ...
Dissertation for receiving a master's degree in the field of Civil Engineering (M.Sc) Major: Structure Abstract: The retrofitting of important government buildings, infrastructure facilities and vital arteries due to the increase in terrorist attacks around the world and the possibility of bombings near buildings and urban places is one of the most important discussions in the ...
Dissertation to receive master's degree in organic chemistry Keywords: Farsi: Besparash, condensation, composite, nanocomposite, anchoring Nitrogen in bonding with metals can destroy them
Dissertation for receiving the degree of Doctor of Dentistry Abstract The long-term clinical success of implants is dependent on osseointegration and adhesion of soft tissues and epithelium to implant surfaces. Various indices including: plaque index, gingival index, bleeding during probing and bone resorption are used to evaluate the health of the soft tissues around the ...
Master's thesis in the field of chemical nanoengineering, abstract modeling of chloride ion removal from gas condensate using nanofiltration of chloride ion in gas condensate can cause severe corrosion of equipment and pipes. Therefore, it is necessary to remove it from the condensate flow. The aim of this work is the mathematical modeling of the nanofiltration process for the ...
Dissertation for Master's Degree (M.Sc) Direction: Applied Chemistry Persian Summary According to international standards, the sulfur in the fuels used in the transportation industry, as one of the most important polluting industries, should be reduced to about 10 ppmw, while many refineries in the world produce fuels with a sulfur content of more than 1000 ppmw. One of the new ...
Introduction Engineers are always looking for better quality. In mathematics and computer science, it is the process of choosing or finding the best member in the sets of available options. Every process has the potential to be optimized and complex problems can be modeled as optimization problems in the fields of engineering, economic and business sciences. The goal of modeling ...
Dissertation for Master's Degree in Mechanical Engineering Field: Applied Design Abstract In this thesis, stability analysis of composite beam reinforced with carbon nanotubes on elastic support under axial force is investigated. The distribution of nanotubes is assumed to be uniform[1]. To determine the properties of materials reinforced with nanotubes, the results of molecular ...
Dissertation for M.Sc degree, specialization: manufacturing and production, abstract in this thesis, how to improve the properties of plastics with the help of heat treatment. First, we will talk briefly about polymers, plastics and their sub-branches and heat treatment on them, and then we will discuss the effect of annealing heat treatment on heavy polyethylene sheets that are ...
To receive a master's degree in polymer engineering - polymer industries, May 2013 abstract With the progress of various sciences and knowledge, the boundaries of knowledge have converged and in some fields we are witnessing
The effect of fiber and pozzolanic materials on the mechanical properties of glass fiber reinforced concrete Master's Thesis of Civil-Structural Engineering Abstract The failure and destruction of concrete is highly dependent on the formation of cracks and microcracks. With increasing loading, microcracks are connected and form cracks. In order to solve this problem and also to ...
Dissertation for Master's Degree in Chemistry (Applied Chemistry - Polymer) Abstract: Ethylene polymerization was successfully performed in the presence of Phillips catalyst and in the slurry phase. In the continuation of the work, the effect of some effective parameters in polymerization, including the effect of trialkylaluminum, the effect of 1-hexane comonomer, the effect of ...
Master's Thesis in Chemical Engineering, Thermodynamics and Kinetics Abstract: A major part of the final properties of the product in emulsion polymerization is determined by the particle size distribution. In this project, an accurate model based on population balance equations (zero-one model) which includes the phenomena of nucleation and particle growth has been chosen to ...
Dissertation for receiving the master's degree ""M.Sc"" orientation: abstract structure In today's reinforced concrete buildings, the use of interframe separators is very common. Intermediate frames with building materials are the main types of separators that are used in this type of buildings. In previous research, these interframe separators are usually considered as ...
Master's thesis in the field of chemistry, analysis, abstract. In this research, the synthesis of polymer nanoparticles of ion template using sedimentation method and for the separation and preconcentration of nickel ions from aqueous samples is reported. Nickel template polymer nanoparticles by dissolving stoichiometric amount of nickel nitrate and ligand ...
Doctoral Dissertation in Chemical Engineering-Biotechnology Abstract The purpose of this study was to produce polyhydroxyalkanoate biopolymer using glucose, fructose, molasses and whey carbon sources by microorganisms Azohydromonas lata DSMZ 1123, Azotobacterbeijerinckii DSMZ 1041, Cupriavidus necator DSMZ 545, Hydrogenophaga pseudoflava DSMZ 1034. In the first stage, to screen ...
Master's thesis in the field of chemistry, Analytical Chemistry, Abstract In this project, a molecular template polymer was prepared for the selective extraction of phenylmercury chloride. To prepare this polymer, methacrylic acid (active monomer), ethylene glycol dimethacrylate (cross-linking agent), 2,2-azobisisobutyronitrile (initiator), phenylmercury chloride (target ...
Dissertation Chemistry for Master's Degree Abstract Acrylic-based pressure-sensitive adhesives are more expensive than rubber-based adhesives, but they have a longer life and resistance to high temperatures, chemicals, UV rays, solvents, light, softeners, and the environment. Modification of acrylic pressure-sensitive adhesives is useful for improving adhesion properties. In ...
Master's thesis in the field of chemistry, Analytical Chemistry, Abstract In this project, a molecular template polymer was prepared for the selective extraction of furan. To prepare this polymer, methacrylic acid (functional monomer), ethylene glycol dimethacrylate (cross-linking agent), 2,2-azobisisobutyronitrile (initiator), a mixture of pyrrole (furan substitute or target ...
Master's thesis in the field of polymerization engineering, abstract was determined by using experimental design methods to determine the optimal feed recipe for the preparation of nitrile rubber. Initially, to determine the factors affecting the rate of polymerization, screening tests were designed according to the Plate-Boorman method, which examines a large number of factors ...
Mechanical Engineering Master's Thesis Proposed Design - Introduction The use of fibers in concrete started about 50 years ago and day by day their use in various fields has increased. Adding fibers to the mixing design improves the mechanical properties of concrete and the behavior of the structure after cracking. It also increases the softness and malleability of the section. ...
Dissertation for obtaining a master's degree (M.Sc) in the field of organic chemistry. Dissertation abstract (including summary, objectives, implementation methods and results obtained): Investigating the effect of cationic polymer compounds in hair care products including shampoo and conditioner on the hair strand, especially its effect on the cuticle of the hair strand. The ...
To obtain a master's degree in mechanical engineering - manufacturing and production Abstract Fuel cells are electrochemical devices that are used to directly convert fuel into electrical energy. One of the most important types of fuel cells is the polymer fuel cell, which is widely used. In general, two types of optimization can be done in the polymer fuel cell: optimization in ...
Master's Thesis in Civil Engineering - Earthquake Engineering March 2012 Abstract Reinforced soil is a special material that is created from the combination of soil and reinforcing member. Arming components resistant to N
Thesis for receiving a master's degree in the field of civil engineering with structural orientation in February. 2013 Abstract: In recent years, significant progress has been made in the field of improvement and resistance
Master's Thesis of Faculty of Art and Architecture, Department: Carpet (Painting), October 2013 Abstract: Today, in today's advanced and industrialized world, using new methods, it is trying to make Tul products
Master's Thesis of Ardakan Faculty of Art and Architecture, Carpet Department (Primary Materials and Dyeing) Mehr 2013 Abstract: During the period of its use, the hand-woven carpet may be affected by various factors and conditions
Chapter 1 1-1-Introduction: Common fluids such as water, oils and ethylene glycol, which are usually used as heat transfer media, have a limited ability in terms of thermal properties, which is the first obstacle to compress and increase the efficiency of heat exchangers. One of the ways to improve heat transfer is to add particles to the fluid. This method is used for fluids ...
Dissertation for master's degree in natural geography majoring in climatology in environmental planning Abstract One of the diseases of this century that unfortunately young people especially girls and young women are suffering from is the disease (MS), the cause of which is still unknown according to the expert doctors of the world and unfortunately they state various theories ...
Master's Thesis in Handicrafts Research in Handicrafts Abstract: Fiber art is the evolved face of modern tapestry in the world, over the centuries, Iranian artists along with artists from other countries have added to the glory and splendor of the textiles produced in the world, but now they have become importers and consumers of that art-craft, and in the wide range of its ...
Abstract The main task of the synchronous generator excitation system is to provide the necessary voltage for the generator excitation winding. The excitation voltage is a dc voltage and it is used to create a flux in the excitation winding of the generator and consequently to produce a magnetic field to produce electrical energy by a synchronous generator. In the provided ...
(Master's degree in physical education (pathology and corrective movements) The effect of yoga exercises and central stability on balance and posture abnormalities of women with multiple sclerosis Abstract Introduction: Multiple sclerosis is the most common progressive neurological disease in young adults. This disease causes the destruction of myelin in the nerved axons and ...
Master's Thesis (M.sc) Civil Engineering, Soil and Foundation Mechanics Abstract In this research, the stability of soil reinforced with geogrid located on an underground cavity was analyzed using plaxis software, and the effect of several factors such as the number of geogrid layers, the length of the geogrid layer, the stiffness of the geogrid layer, the optimal location of ...
Master's Thesis in Civil Engineering - Roads and Transportation) Overview Pavements are usually affected by various factors that affect their life. Since a road passes through different areas where the subsoil, the type and volume of traffic and the climatic conditions of these areas are different from each other, therefore, various disadvantages and defects arise in different ...
Dissertation for Master's Degree in Civil Engineering, Structures, Abstract: This thesis is the results of a numerical and parametric study on the effect of reinforcing reinforced concrete shear wall with FRP composite and applying the results of the finite element method. The finite element program is compared and calibrated against experimental data. Then, the numerical ...
A master's thesis in the field of electrical engineering - field telecommunications, abstract, investigation and analysis of leaf reflective structures in the field of plasmonics for the application of passive components in the design of optical integrated circuits, limits the diffraction limit of the miniaturization of optical elements. Surface plasmon polaritons that propagate ...
Dissertation for Master's Degree in Mechatronics Engineering Persian Abstract The purpose of this project is to introduce a new approach for troubleshooting gas transmission pipelines using mechanical waves, which is much cheaper and easier than other methods. who are currently working. These lines are usually located in difficult environmental conditions and far away and in ...
Dissertation for master's degree in civil engineering, structural orientation. Abstract Good bond strength between the old and new concrete surface is a key factor in the performance of concrete repairs. The purpose of this thesis is to investigate and evaluate the bond strength between the surface of the old concrete and the added concrete. In this thesis, a laboratory research ...
Civil Engineering Master's Thesis - Soil and Foundation Mechanics Abstract From the past until now, one of the most economical methods to improve the mechanical properties of clay soils has been stabilization by means of additives such as lime and cement in construction projects such as road construction and consolidation of building foundations. Also, with the passage of time ...
Dissertation for obtaining a master's degree in chemistry, fluoride has been known as a toxic ion for many years. The main source of fluoride in aqueous solutions is minerals containing fluoride and the industrial activities of factories. According to the report of the Environmental Protection Organization, the amount of fluoride more than 1 mg/liter causes various diseases. In ...
Dissertation for Master's Degree in Physical Education and Sports Science Abstract The purpose of this research was the effect of a plyometric circuit training course on the physical fitness factors of wrestling students in district 11 of Tehran. For this purpose, 30 wrestling students of district 11 of Tehran city in the academic year of 1992-1993 were purposefully selected and ...
Master's Thesis in Nano Chemical Engineering Abstract The aim of this study is to separate cationic polyacrylamide from the waste water of Prodeh Tabas coal washing plant using the polymer membrane filtration process. The primary membrane was prepared using polyacrylonitrile (PAN) by phase inversion process, and then they were prepared using hydrolysis as chemical modification ...
Abstract: In electromyography studies, it is generally accepted to normalize the signals so that they can be compared and interpreted. But due to the lack of a standard method for normalization, there are many differences in the normalization method. These differences are related to the reference signal measurement method. The purpose of this study is to compare the reliability ...
Master's Thesis in the field of Chemical Engineering Abstract Investigation of parameters affecting the production of alumina gel by sol-gel method Sol-gel method is one of the common methods that is widely used to produce different nanoparticles. In this method, a solution of initiators is mixed with water in the presence of a catalyst, and hydrolysis and polymerization ...
Master's Thesis in Chemical Engineering (Gas Orientation) Abstract Laboratory Investigation of Gas Dehumidification Using Triethylene Glycol Solution in Hollow Fiber Membrane Contactors In this study, two hollow fiber membrane contactors with different types of Polyvinylidene Fluoride (PVDF) and Polypropylene (PP) fibers have been used for gas dehumidification by Triethylene ...
Dissertation (dissertation) to receive a degree... in the field of physical education and sports sciences, specialization in sports physiology. Therefore, the aim of this study was to investigate the effect of endurance, strength and parallel exercises on heart rate, systolic blood pressure, diastolic blood pressure, and PR interval in the workers of Pars Khodro Company. In ...
An academic thesis for receiving a master's degree in the field of physical education in the field of motor behavior, strengthening the factors of muscle function in the developed training stages and maintaining these abilities is considered one of the most important tasks of coaches and athletes when they are not training or are injured. With this aim, the present research ...
Master's Thesis (M.Sc.) Direction: Process Design Abstract Currently, membranes have found a special place in different separation industries and have wide applications in different fields of separation, including liquid solutions and different gases. Membrane technology is one of the most widely used technologies in today's industry, whose field of application is wide ranging ...
Thesis for obtaining a master's degree. Abstract: The increase in environmental concerns and the progress of green chemistry processes have necessitated the replacement of homogeneous catalysts with heterogeneous ones. In this research, activated carbon was used as a suitable substrate due to its special properties. The most important of these properties are resistance in acidic ...
Dissertation to receive the Ph.D. degree in Pharmacy. Persian summary. Quick-release oral tablets are solid pharmaceutical forms that have received special attention in the last three decades and are considered as an alternative to regular tablets and capsules. In contact with oral saliva, these tablets quickly disintegrate and turn into soluble fine granules in less than 1 ...
Master's thesis in the field: Chemical Engineering Abstract In this research, a comprehensive two-dimensional model based on the Finite Element Method (FEM) is proposed for modeling gas-solvent membrane contactors to remove carbon dioxide[1] from synthesis gas. Aqueous solution of monoethanolamine has been used as absorbent solvent stream and CO2/N2 gas mixture as gas stream. ...
Master's thesis in the field of chemical engineering, abstract of the laboratory study of iron oxide production on a microstructural scale using the precipitation method with supercritical anti-solvent by: One of the problems of cement used in oil wells, which are used to connect wall pipes and well walls, is that these cements do not have the desired resistance against high ...
Master's thesis in the field of chemical nanoengineering Abstract The synthesis of silicon dioxide nanoparticles from silicon oil waste using the synthesis method of silicon dioxide nanoparticles [1] has many industrial applications. The industrial use of these particles in traditional fields as well as new fields is expanding, for which new applications are continuously found. ...
Dissertation for Ph.D. Ph.D. Persian Summary Aripiprazole is an atypical antipsychotic drug that shows its therapeutic effect with a combination of antagonistic activity of 5-HT2A receptor and partial agonistic activity of 5-HT1A and D2 dopamine receptors. This drug is used in the treatment of schizophrenia, type I bipolar disorders and as an adjunctive treatment in major ...
Dissertation for receiving a master's degree, specialization: microbiology. Abstract Staphylococcus aureus is considered as the third most important cause of food-borne diseases. Milk is the primary source of Staphylococcus aureus and milk products are a known source of staphylococcal poisoning. This study was conducted to determine the prevalence of Staphylococcus aureus in ...
Master's Thesis of Chemical Engineering Abstract In the last few decades, due to the growth of the population as well as the improvement of living standards, the consumption of fibers and the production of textile waste materials have increased greatly. Burial and burning are one of the main ways of managing textile waste materials, which have destructive environmental effects. ...
Dissertation for receiving the master's degree ""M.Sc."" Orientation: Biotechnology Abstract: Lipases are one of the most important enzymes in biological systems in various industries. The application of free lipase is not cost-effective in industries due to its shorter half-life. Enzyme immobilization on different bases increases stability, repeated use, ease of product ...
Master of Physical Education (Pathology and Corrective Movements) Abstract Introduction: Multiple sclerosis is the most common progressive neurological disease in young adults. This disease destroys myelin in nerve axons and causes functional damage. One of the important areas involved in MS is the cerebellum. A problem in this structure causes a disturbance in balance, etc., ...