Download more than 100 examples of thesis, proposal and project topics about plane strain in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Tendency of soil mechanics and foundations. Abstract: Investigating the behavior of soils due to different loadings is one of the most important issues in geotechnical engineering. The behavior of soils depends on several parameters such as grain size, grain type, loading method, stress history, etc. Non-alignment of main stress and main strain directions is a phenomenon that ...
Master's Thesis of Mechanical Engineering-Applied Design Abstract In many applications, graphene (monolayer or multilayer) is used in the polymer matrix as a composite. In this research, ideal graphene with a hexagonal bond shape between atoms, located in a polymer matrix, with different boundary conditions, including gripped and simple, under biaxial external compressive ...
The field of natural geography, climatology trend in environmental planning Abstract: Ardabil province in the northwest of the country with its long and elongated shape has faced climatic anomalies in recent years such as: increase in temperature especially in winter season, increase in the occurrence of hot winds, increase in evaporation and transpiration potential, decrease in ...
Dissertation for Master's degree (M.A.) specialization: translation, introduction to the communication and information society, the enchanting mirage of the last decades of the 20th century, has been done as a practice from now on. Timothy Leary predicted in his book titled Techniques of Chaos[1] that the 21st century will be dominated by a modern culture on a global scale in ...
Master's Thesis (M.sc) Civil Engineering, Soil and Foundation Mechanics Abstract In this research, the stability of soil reinforced with geogrid located on an underground cavity was analyzed using plaxis software, and the effect of several factors such as the number of geogrid layers, the length of the geogrid layer, the stiffness of the geogrid layer, the optimal location of ...
Dissertation to receive M.Sc degree in civil engineering, structural orientation. Abstract: One of the ways to strengthen the building against lateral loads is the use of a wind system (convergent or divergent). The increasing use of steel braces to deal with earthquake forces requires that the seismic performance of these types of systems be given more attention. The common ...
Dissertation for Master's Degree in Civil Engineering, Structures, Abstract: This thesis is the results of a numerical and parametric study on the effect of reinforcing reinforced concrete shear wall with FRP composite and applying the results of the finite element method. The finite element program is compared and calibrated against experimental data. Then, the numerical ...
Dissertation for receiving a master's degree (A.M) in the field of Persian language and literature Abstract: Moderation and moderation are considered one of the fundamental principles in Islamic thought and culture. In Quranic teachings, it is considered a desirable thing; And it has been reflected in the works of poets and writers. Saadi and Majd Khafi are among those who have ...
Introduction In today's era, the presence of waste materials resulting from various physical and chemical processes is one of the important problems of industrialized and developing countries. So that extensive research is being carried out for methods of recycling or disposing of them to minimize the damage to the environment. In this regard, construction researchers, like ...
Civil engineering, soil and foundation, abstract, considering that all engineering infrastructures and vital urban and non-urban places and arteries such as: foundations of buildings, bridges, silos, dams, retaining walls, marine structures, industrial facilities, etc. . . All spread on a platform called the earth. The importance of investigating the type of instability in ...
Master's Thesis in Mechanical Engineering (Applied Design) Introduction The question of the generating factor has always been raised as a dynamic question in all fields of science. Due to the complexity and unforeseen factors and the lack of all-round human mastery over physical issues, it has not been possible to identify the causative factor in many cases, therefore, due to ...
A master's thesis in the field of mechanics, applied design, abstract. These two characteristics are caused by phase transformations under different thermodynamic loadings. Depending on these two mentioned features, memory alloys can be used as actuators in different forms. These structures can be used in different fields such as medicine, aerospace, knowledge
Dissertation for M.Sc Master's degree, mechanical engineering-applied design Abstract With the emergence of composite materials, a huge progress was achieved in many engineering applications. Nevertheless, problems such as delamination, stress concentration, and discontinuous distribution of stress, the idea of ??creating a new type of composite materials in which properties ...
Master's Thesis in Mechanical Engineering-Applied Design Abstract In this thesis, classical sheet theories, first-order shear deformation theory and refined two-variable theory for the free vibration problem are investigated using standard finite element and hierarchical finite element methods. The refined two-variable theory is an equivalent single-layer theory, in which two ...
Dissertation for Master's Degree in Energy Conversion Mechanical Engineering Abstract: Fluid propulsion vector orientation has emerged as an important technology for high performance air vehicles. This technology can improve the maneuverability of the aircraft by changing the nozzle flow and its deviation from its axial direction. The purpose of this study is to investigate the ...
Master's thesis in the field of mechanical engineering - applied design approach. Abstract: Identifying the stiffness and damping coefficients of a beam support. By: Majid Abedi. Supports and connections play a fundamental and important role in engineering structures. It is necessary to identify different support parameters. Stiffness and damping parameters are the most ...
Dissertation for obtaining a master's degree in the field: horticulture, ornamental plants. Abstract This study was conducted in order to investigate the effect of nickel on the life after harvesting of gerbera flower in the form of a completely randomized design with three replications. Healthy gerbera flowers (Gerbera jamesonii cv. 'Intense') were purchased from a commercial ...
Dissertation for Master's Degree in Mechanical Engineering Field: Applied Design Abstract In this thesis, stability analysis of composite beam reinforced with carbon nanotubes on elastic support under axial force is investigated. The distribution of nanotubes is assumed to be uniform[1]. To determine the properties of materials reinforced with nanotubes, the results of molecular ...
Abstract Pareto optimal design of six-rod mechanism for the production of Morteza Ilanlo route. In this thesis, we present the dimensional optimal synthesis of six-rod mechanism with rotational constraints. The goal of synthesis is to produce a path that is as close as possible to the desired path. From the chains of six shafts, with seven rotational connections, known with one ...
Mechanical Engineering - Applied Design Orientation Abstract: Vibration is one of the important and basic concepts in engineering sciences. In simple words, any system that has mass and spring property has the ability to vibrate and can vibrate at a natural frequency. It can be said with certainty that 95% of vibrations in industries are harmful to systems. If the system is in ...
Master's thesis in the field of civil engineering, structural orientation Chapter 1: Introduction 1-1. General One of the most important natural events that have always transformed human life and sometimes destroyed human civilizations by destroying buildings is earthquake. Therefore, humans have always tried to identify and deal with the dangers caused by earthquakes and still ...
Master's Thesis in Mechanical Engineering (Applied Design): Abstract of the analysis of leading damage in pin connections of composite materials. The purpose of this research is to analyze the leading damage in pin connections of composite materials. To do this, finite element software ABAQUS and FORTRAN programming have been used. The contact between the composite plate with ...
Master's thesis in the field of mechanical engineering (applied design trend) Abstract of the study of the deterioration of non-isotropic TWB sheets under the hydroforming process. During the research, four different metals of aluminum alloys 6111-T4, 5083-H18, 5083-O and dual-phase steel DP590 and two spherical tensile tests and simple uniaxial tensile tests were used. Then we ...
Dissertation for receiving master's degree in mechanical engineering, the trend of manufacturing and production of complex industrial products from metal pipes with the aim of increasing the strength-to-weight ratio of structures and especially reducing the fuel consumption of vehicles has attracted the attention of industrialists in recent years. In this regard, one of the new ...
Master's Thesis in Mechanical Engineering (Applied Design) Abstract of three-dimensional interlayer stress investigation in mechanical connections in layered composite materials The purpose of this thesis is to investigate three-dimensional interlayer stresses in mechanical connections in layered composite materials. For this purpose, finite element method and ABAQUS software ...
Master's degree thesis Industrial Engineering - Social Economic Systems August 1391 Abstract of the project scheduling problem with limited resources is one of the most famous problems raised in research topics in general
Abstract: The aim of this research is to investigate the relationship between the sensitivity of asymmetric cash flow and cash retention in companies, with an emphasis on financial constraints. This research is a library and analytical-causal study and is based on panel data analysis. In this research, the financial information of 112 companies admitted to the Tehran Stock ...
Dissertation of master's degree in industrial engineering Winter 92 abstract Production planning is actually allocating and determining the order of priorities for doing things optimally.
Master's Thesis in Computer Engineering (Artificial Intelligence) Abstract Multi-agent systems are computing systems in which several agents interact and work together to achieve a specific goal. The reason for the emergence of such systems is the existence of situations in which a problem must be solved in a distributed fashion. For example, in situations where the use of a ...
Master's thesis in the field of civil engineering, soil and foundation, today, due to the progress of the tunneling industry, the need to analyze and design underground structures in rocky environments is felt more than in the past. Although there are many numerical and practical software available in this field, none of them are complete and perfect in all fields, and each of ...
Dissertation for receiving a general doctorate degree Abstract Introduction and purpose: Metallobetalactamases (MBL) are enzymes that are produced by non-fermenting Gram-negative bacilli such as Pseudomonas aeruginosa and make these strains resistant to carbapenems. As a result, Pseudomonas carrying metallobetalactamase genes are considered a serious clinical threat. Considering ...
Dissertation (or Thesis) to receive the master's degree ""M.SC"" in microbiology. Abstract: Abstract: E.coliO157H7 bacteria is one of the main causes of food poisoning and diseases such as diarrhea, hemorrhagic colitis, hemolytic uremic syndrome, thrombocytopenic purpura and even death in humans. The aim of this study is to evaluate pathogenic genes 1stx, 2stx, eaeA in urine ...
Master's Thesis in Mechanical Engineering, Applied Design, Abstract In this research, an analytical solution is presented to show the size dependence and the effect of temperature difference on nonlinear free vibrations and post-buckling behavior of microtubes containing current. Based on Euler-Bernoulli model, strain gradient theory, Couple's stress theory and von-Carman ...
Dissertation for Master's Degree in Mechanical Engineering (Applied Design) Abstract In this research, the analysis of vibrations, buckling and wave propagation of wrapped nano beam under axial load on Pasternak substrate is discussed. First, the displacement and displacement field of the wrapped beam is obtained. Then, using the obtained displacement field, strain-displacement ...
Dissertation for receiving a master's degree (M.Sc.) in the field of food science and engineering, majoring in food microbiology. Abstract One of the effective ways to improve the quality of bread and baked goods is to optimize the fermentation conditions of the product. In addition to increasing the nutritional value of bread, proper fermentation improves the rheological ...
Dissertation for master's degree in the Department of Plant Pathology Abstract One of the limiting factors of potato cultivation in Golestan province are plant diseases, the most important of which are viruses, and among them, PVY (Potato virus Y) is one of the most destructive. This virus infects many species of the Solanaceae family, plus more than 60 other plant species. The ...
Master's Thesis for Master's Degree in Electrical and Robotics Department of Electronics Abstract In this thesis, the problem of retrieving images of fighter planes from a database including 10 different models based on a query image [1] has been investigated. Airplanes of the same model as the query image are identified in the database and presented to the user. The main ...
Thesis Mechanics to get a Master's degree Abstract: First, the solution of Volterra-type anti-plate displacement in a rectangular plate with limited length and width and different boundary conditions is obtained by the method of separation of variables. Then, the distributed displacement technique is used to obtain the integral equations related to the rectangular plate weakened ...
Thesis - Master's Degree in Geophysics - Winter Seismology 2012 Abstract In this research, the effect of a branch fault in a subduction zone on tsunami waves using numerical modeling of tsunami waves.
Master's Thesis in Civil Engineering - Earthquake Engineering 1391 Abstract Structures with frames with coaxial braces are among earthquake resistant systems. These structures are widely
Thesis of master's degree in civil engineering, soil and foundation mechanics orientation, September 2019, abstract: analysis of dynamic interaction between soil and structure (due to the mutual effect of the structure and its retaining soil on each other), D
Dissertation for Master's Degree in Civil Engineering (M.Sc) Orientation: Structure Winter 2013 Abstract: Resilient construction of important government buildings, infrastructure facilities and vital arteries due to the increase
Thesis for obtaining a master's degree in the field of civil engineering, oriented towards soil and foundation mechanics, Shahrivar 2013 Abstract Dams are always considered as infrastructure structures
Dissertation of master's degree in structural engineering, February 2011 Abstract: In the optimal civil engineering structure construction for static loadings have been significantly developed. But, in
In order to receive a master's degree in civil-soil and soil engineering in March 2013, abstract, different methods are used to stabilize pits, among them nailing method and ink method.
Master's Thesis in Civil Engineering - Earthquake Engineering March 2012 Abstract Reinforced soil is a special material that is created from the combination of soil and reinforcing member. Arming components resistant to N
Thesis for receiving a master's degree in the field of civil engineering with structural orientation in February. 2013 Abstract: In recent years, significant progress has been made in the field of improvement and resistance
Dissertation of Master's Degree in Civil Engineering – Earthquake Engineering 2013 Abstract: Concrete beam and slab bridges with neoprene supports are among the most common highway bridges in the country.
Dissertation for master's degree in civil-structural field winter 2012 Abstract In recent years, the number of buildings that have suffered damage due to the loss of their gravity-bearing members has increased. Therefore, it has become important to design structures so that they are resistant to progressive damage in addition to the effects of earthquakes. One of the factors ...
Dissertation for Master's Degree, Field: Architecture, Orientation: Architectural Technology, Spring 2014 Abstract With the formation of cities and the development of cities and communities, the needs and demands of people in the city
Master's Thesis in Civil Engineering - Structural Orientation, February 2013 Abstract: The performance of a building during an earthquake depends on many factors, as a result, predicting the seismic performance of structures should be considered either explicitly or implicitly as part of the design or evaluation. Predicting the seismic response of the structure is very ...
Dissertation of master's degree in public administration for the academic year 2010-2013 abstract Considering today's competitive environment, the importance of quality improvement programs in order to achieve product quality
Dissertation of Master's Degree in Economic Sciences October 1392 abstract In economic literature, population, both in terms of level and size and in terms of its growth rate, is one of the most important variables.
Dissertation for Master's Degree in Geography and Urban Planning Abstract In this research, the changes in urban land use in Tabriz Region Three Municipality (comparison of new and old detailed plan) have been investigated. The statistical population consists of the municipality of Seh Kalanshahr region of Tabriz. This research is considered to be an applied type of research, ...
Master's Thesis in Accounting (MA) Abstract The purpose of this article is to investigate the relationship between investment sensitivity and cash flows with the level of capital expenditures. In this research, the financial information of 73 companies admitted to the Tehran Stock Exchange during the period from 1382 to 1391 has been examined (730 years - companies). 18SPSS ...
Abstract The aim of the present study was to investigate the effect of personality traits on suicide attempts. For this purpose, 54 people with a history of suicide attempts were randomly selected as a sample in the emergency room of hospitals in Bandar Abbas city. In addition, the same number of normal people (with no history of suicide) were selected by the researcher taking ...
Master's Thesis in Family Counseling Abstract Introduction and Purpose: The aim of the present study was to investigate the effectiveness of Hastinger's cognitive therapy on reducing the symptoms of depression in patients with human immunodeficiency virus. Method: The study was a single-case study using a purpose-based sampling method. Three women infected with human ...
Dissertation for Master's Degree in Counseling and Guidance (M.A) Abstract The purpose of this study was to investigate the effect of painting therapy on the mental health of male students of primary schools in Gachsaran city. The variables of the current research were mental health with dimensions (anxiety, hostility, physicalization, interpersonal sensitivity, obsession, ...
Thesis for Master's Degree in Family Counseling Abstract The main purpose of the present study is to examine the relationship between mothers' self-differentiation with parent-child conflict and the responsibility of female middle school students. The tools used in this research are 1- Self-Differentiation Questionnaire (DSI-R) of Yonesi. 2- Parent-Child Conflict Questionnaire ...
Academic thesis for obtaining a master's degree in architectural engineering in March 2012 1- The first chapter (research plan) stating the problem of the relationship between man and nature is an attractive and interesting topic in M
Dissertation for receiving a master's degree in architecture, architectural orientation, 2013 abstract, pristine natural environments or local protected areas are considered suitable for ecotourism, and the development of tourism in
Dissertation for the Master's degree ""M.A."" (Business Management - International Orientation) Abstract Electronic business is a phenomenon that requires comprehensive transformation in all aspects of business activities of companies to achieve business facilitation. This, in addition to micro-developments that happen at the company level, strongly requires changes in the ...
Executive Management Master's Thesis Abstract In today's marketing, the cost of losing a customer is equal to losing the benefits of the service that customer needs throughout his life. Insurance can be considered as one of the vital economic arteries of any country. The main goal of insurance marketing management is to attract new customers and retain previous customers and ...
Thesis for receiving a master's degree in the field of educational management in the field of educational sciences. Abstract: The problem of many companies and educational centers today is the problem of human resources and the lack of proper efficiency of these forces in organizations. This research has been prepared for all industries, companies, organizations and educational ...
Thesis for receiving the degree of M.Sc. Industrial Engineering-Industrial Engineering Summer 2013 Abstract: In today's age, are there fewer companies? It can be seen that it is exclusively related to the production of a product.
Dissertation for Master's Degree in Industrial Engineering, Industrial Orientation, Esfand 90, Abstract Today, due to the progress in technology, the globalization of markets, the diversity of customer demand, and the increase
Master's Thesis in Industrial Management - Operations Research. Abstract Many researches have been conducted in the field of urban transportation, each of them trying to improve these networks by specifying the type of vehicle and also a specific purpose. The current thesis also tries to provide a mathematical model to increase the income of Tehran subway. For this purpose, we ...
Abstract: The aim of this study is the way of spending free time of Shahrized teachers with emphasis on sports activities and its relationship with job burnout in academic year 92-93. This research is of a descriptive and expressive type, and the method of collecting data and information, documentary and library studies and field studies, as well as the data collection tool, a ...
Dissertation for obtaining a master's degree in the field of psychology for exceptional children. Abstract The field of independence is an important topic of study and research in the field of mental health and education in the world. Cognitive-behavioral play therapy methods are offered to deal with concerns such as anger, anxiety, perfectionism, aggression, separation, social ...
Master's Department of Handicrafts Thesis for receiving Master's degree Mehr 1392 Abstract By adapting itself to the natural environment, mankind was able to continue to survive and at the same time influence and control the force.
Master's thesis in the field of geography, urban planning, abstract Urban crises are an integral part of urban management, and this issue takes a much more complicated form in metropolitan cities, considering the large and growing population of Isfahan metropolis and its location in the Sanandaj-Sirjan zone, the occurrence of a large earthquake or other natural and human ...
Dissertation to receive a master's degree in the field of meteorology with an urban orientation. Abstract: The researches conducted in the world mainly indicate a gradual increase in the average temperature. Today, the trend of freezing temperatures is one of the most important climate parameters that are evaluated to prove climate change in a region. Analyzing the trend of the ...
Dissertation for Master's Degree in Clinical Psychology Abstract: Teenagers who are brought up with a correct parenting style have better lives and mental states. For this purpose, the current study was conducted with the aim of investigating the effect of family life education (F.L.E) on changing the parenting style of mothers with teenage sons who are studying in Shahid Dr. ...
Master's thesis in the field of economic sciences for the academic year 2013-1394 The first chapter Generalities of the research Introduction Today in many countries, especially in the developing countries, besides the economy
Dissertation for Master's Degree (M.A.) Major: Geography and Tourism Planning Abstract of the Dissertation (including summary, objectives, implementation methods and results obtained): This research has been carried out under the title of examining the capabilities of nature tourism in Swadkoh. The purpose of this research is to identify and introduce the capabilities and ...
Master's Thesis of Geography and Rural Planning Abstract In the past, tourism and tourism were special for nobles and elites and due to economic and technical bottlenecks and..... It did not play a significant role in the social, economic, and environmental aspects of human life. But in sync with the events and profound social and economic developments in the life of societies ...
Master's Thesis Field: Psychology (M.A) Orientation: Educational Abstract: The present study was conducted with the aim of investigating the relationship between students' resilience and their different personality traits and attachment styles. The statistical population of this descriptive study included all pre-university students of Beshagard city. The sample size was ...
Abstract The Persian Gulf is one of the strategic and vital points from the point of view of international politics. In addition to the importance of shipping, the discovery and extraction of huge oil and gas resources and the strong dependence of countries on these materials as vital materials for industry have increased the geopolitical importance of this region. In such a way ...
Dissertation for obtaining a master's degree in the field: application of climate in environmental planning. Abstract Since the beginning of history, drought has been a part of climate changes in our environment. The lack of water on one hand and the indiscriminate and wrong use of water resources on the other hand are a serious threat to the environment and water resources in a ...
Dissertation for receiving a master's degree in the field of: Geography and Urban Planning Abstract In this research, the changes in urban land use in Tabriz Region Three Municipality (comparison of new and old detailed plans) have been investigated. The statistical population consists of the municipality of Seh Kalanshahr region of Tabriz. This research is considered to be an ...