Download more than 96 examples of thesis, proposal and project topics about pipe troubleshooting in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Dissertation for Master's Degree in Mechatronics Engineering Persian Abstract The purpose of this project is to introduce a new approach for troubleshooting gas transmission pipelines using mechanical waves, which is much cheaper and easier than other methods. who are currently working. These lines are usually located in difficult environmental conditions and far away and in ...
Dissertation for Master's Degree in Civil Engineering – Shahrivar Marine Structures, September 1992 Abstract: Pipe-in-pipe systems are widely used in transmission line applications.
Dissertation for the Master's Degree (M.A.) Major: International Business Abstract of the Dissertation (Includes Summary, Objectives, Implementation Methods, and Results): Organizational awareness is how one can benefit from organizational knowledge to achieve goals, how one can use the acquired knowledge, prescribed practices, official channels of communication and ...
To receive a master's degree in civil engineering - water Abstract: Relaxation ponds should be designed in such a way that they can depreciate the potential energy stored in the reservoir water of dams and dams in such a way as to transfer it to the natural bed so as not to cause the loss of the bed and in critical conditions to destroy the pond and dam itself. In different ...
Dissertation for Master's Degree (M.Sc.) Field: Gas Processing and Transmission Engineering Abstract: Today, one of the problems in gas transmission lines is the gas hydrate phenomenon, which is a combination of light gases such as methane, ethane or carbon dioxide with water molecules under certain temperature and pressure conditions to form an ice-like substance that contains ...
Chemical engineering master's thesis without preface today simulation in processes can be an important tool to solve problems in different industries. A new idea that should be done in the real world by trial and error with a lot of costs and risks can be simulated in the environment of a strong software and the results can be used. Simulation can also be used to check and ...
A master's thesis in the field of chemical engineering. Abstract of the laboratory study of the wear phenomenon of gas containing sand and liquid droplets in pipelines. For this purpose, a pipeline test device including: vertical and horizontal pipelines and various connections has been made. The studied fluid consists of three phases: gas, liquid and solid. The gas phase is ...
The master's thesis of precision instruments and automation in the oil industry. The introduction of the entire research is one of the important scientific, technical and economic topics, the issue of corrosion of metals and the protection of metal facilities. Investigating the topic of corrosion is not so simple and with all the research done, its factors are still not known ...
Thesis for master's degree in the field: chemical engineering Abstract Hard polyurethane[1] is always considered one of the most effective and practical polymers in various industries, especially the coating industry. Excellent adhesive property, curing ability at ambient temperature and corrosion resistance of this polymer are some of its remarkable features. This study was ...
Dissertation of the doctoral course in the field of chemical engineering, biotechnology, abstract. Heavy oil transportation by pipeline is one of the most important and suitable methods of transportation, and the high viscosity of heavy oil compounds and their sedimentation in the transportation route is the most obvious problem of this type of transportation. Emulsifying heavy ...
Master's Thesis in the field of Chemical Engineering (no orientation) Abstract of the laboratory study of the wear phenomenon of liquid containing sand in pipelines. The studied fluid consists of two phases, liquid and solid. The liquid phase is water, and sand particles form the solid phase. In this research, the parameters affecting the wear rate, including: fluid speed, sand ...
Mechanical Engineering - Applied Design Orientation Abstract: Vibration is one of the important and basic concepts in engineering sciences. In simple words, any system that has mass and spring property has the ability to vibrate and can vibrate at a natural frequency. It can be said with certainty that 95% of vibrations in industries are harmful to systems. If the system is in ...
To get a master's degree in mechanical engineering Abstract: Today, the use of aluminum and magnesium alloys in the automotive and aerospace industries is increasing due to the high strength of these alloys and their light weight. Since the forming ability of these alloys is low at ambient temperature, forming these alloys at high temperatures improves their formability. ...
Dissertation for receiving master's degree in mechanical engineering, the trend of manufacturing and production of complex industrial products from metal pipes with the aim of increasing the strength-to-weight ratio of structures and especially reducing the fuel consumption of vehicles has attracted the attention of industrialists in recent years. In this regard, one of the new ...
Doctoral Dissertation in Civil Engineering - Summer 2013 Earthquake Abstract One of the appropriate tools to know the condition of the network As one of the vital artery systems, water distribution is an indicator of reliability. one hand
Summer 1390 Expertise Master of the field: Civil Engineering Orientation: Structure Abstract: In this thesis, the effect of nanosilica on the mechanical properties and durability of concrete containing polypropylene fibers
Dissertation of master's degree in civil engineering, structural orientation, October 1390, first chapter of generalities. 1-1 Introduction In recent years, there have been many advances in the field
Master's Thesis of Ardakan Faculty of Art and Architecture, Carpet Department (Primary Materials and Dyeing) Mehr 2013 Abstract: During the period of its use, the hand-woven carpet may be affected by various factors and conditions
Chapter 1 1-1-Introduction: Common fluids such as water, oils and ethylene glycol, which are usually used as heat transfer media, have a limited ability in terms of thermal properties, which is the first obstacle to compress and increase the efficiency of heat exchangers. One of the ways to improve heat transfer is to add particles to the fluid. This method is used for fluids ...
Thesis of master's degree in industrial engineering, focusing on system management and productivity, March 2013. Due to the extensive reorganization of business processes and structures, as well as the changing world
Thesis for obtaining a master's degree in the field of natural geography, geomorphology in environmental planning. Abstract: Studies on the effects of urban development on Zarjoub and Goharroud rivers in Rasht city have been carried out with the aim of improving the environmental quality of changing the conditions of the rivers from their pollution and flooding to favorable and ...
Dissertation for Master's Degree (M.Sc) Field: Natural Geography - Hydrology and Synoptic Meteorology Abstract Damages caused by critical cold temperatures are increasing, especially in natural ecosystems and densely populated urban areas. Central Iran is a dry land prone to cold weather, especially during winter, and lacks resources to moderate temperature tensions, such as ...
Dissertation for the Master's degree ""M.A"" Field: Geography and Urban Planning Abstract: Today, with the expansion of cities and the growth of urbanization, as well as the increase in problems and dilemmas caused by this process and the importance of finding integrated management and balanced, comprehensive and sustainable development of the city, the discussion of improving ...
Dissertation for Master's Degree in Political Geography Abstract: Iran's foreign policy in the last three centuries was based on the country's western borders, but in practice, this country has suffered significant injuries from its eastern borders, especially after the division of the subcontinent into three independent countries in 1947 and the occurrence of border disputes ...
Dissertation for Master's Degree (M.A.) Direction: Remote Sensing and Urban and Rural Geographical Information System Abstract: Subsidence phenomenon is one of the natural disasters that causes the reduction of underground resources such as underground water, oil, etc. One of the most important causes of land subsidence is the drop in static level and increase in effective ...
Master's Thesis in Electrical-Control Engineering Abstract In this article, diagnosis, reconstruction and fault prediction of nonlinear systems with uncertainty are investigated. The diagnostic criterion is the residual signal calculated from the difference between the system output and a sliding mode viewer. The idea of ??sliding mode is to compensate the effect of ...
Dissertation for Master's Degree (M.A.) Direction: ""International Marketing"" The abstract of the present research discusses the effects of globalization on the country's road construction machinery manufacturing industry. The hypotheses raised in this research were analyzed by PLS test. The results show that the membership of the World Trade Organization will have an effect on ...
Dissertation for Master's Degree (M.A) Field of Study: Public Management (Transformation Orientation) Abstract In the current research, the relationship between organizational learning and organizational entrepreneurship in Noordulule Safasaveh company has been investigated. In this regard, organizational learning based on Nifa's model and organizational entrepreneurship based ...
Dissertation for Master's Degree in Civil Engineering Majoring in Environmental Engineering Abstract In this research, the effect of biological reactions on the removal of organic substances in wastewater during transfer from production sources to the treatment plant in conventional networks and new small diameter networks was investigated. For this purpose, a part of these ...
Dissertation to receive a master's degree, specialization: civil engineering-water engineering Abstract: In this research, the effect of land slope, difference in height of pressure booster stations, height above sea level on the characteristics of the length of the water transmission systems in order to verify the feasibility and facilitate the prediction of its use and optimal ...
Master's Thesis of Information Technology Engineering Abstract In today's world, the Internet and its most important service, the Web, has caused many changes and transformations in human life. The Internet provides all the needs of people to communicate with each other, to obtain information in any field, play and entertainment, education and any field that comes to mind. The ...
Master's thesis in the field of civil engineering, structural orientation. Abstract In this study, the evaluation and comparison of nonlinear and numerical analysis of deep reinforced concrete beams with openings without reinforcement with deep concrete beams with openings reinforced with FRP sheets and deep reinforced concrete beams without openings by Abaqus finite element ...
Dissertation for Master's Degree in Civil Engineering, Marine Structures, Abstract: Tension-based platforms are among economic marine platforms for use in deep waters. The correct prediction of the platform's dynamic response to environmental loads is very important in its economic and safe design. In this research, the dynamic behavior of the tension base platform under the ...
Dissertation for receiving a master's degree in the field: Persian language and literature. Abstract: Music is a combination of sounds in a pleasant way. The history of Iranian music is tied to the emergence of the Aryan race, the pleasant and melodious words gradually took the form of poems and songs and led to the creation of songs and music. Music and literature as two ...
Dissertation for Master's degree (M.S) Chapter 1 History of dynamic analysis of liquid storage tanks and regulatory orders in this regard Abstract The main goal of this research is to investigate the effect of the presence of seismic isolators on the dynamic performance of liquid storage tanks during an earthquake. In this regard, it is necessary to first know the dynamic ...
Master's Thesis (Civil Engineering - Water and Wastewater Engineering) Abstract: In this study, ram impact pump modeling was done by the software that was prepared. This software finds the outputs of the HAMMER software as input and by obtaining other information (including the pumping height, etc.) it calculates the amount of pumped water every time the valve is suddenly turned ...
Thesis for obtaining a master's degree (M.A) (Field: Business Management, Major: Domestic Business) Abstract: In today's ultra-competitive world, the secret of survival and success of organizations is to understand the competitive structure of the market. Achieving this understanding requires management's knowledge and understanding of customer's opinions and demands, and ...
Dissertation for the Master's degree ""MA"" in Persian language and literature Abstract Culture and customs have always been with the people since long ago and have their roots in the history of the people of every country. Over time, social and psychological factors affect the way these customs are held. With a deep look at the past and the special culture and customs that the ...
Master's thesis in the field of civil engineering, soil and foundation, in this research, the bearing capacity of the conical pile group and the cylindrical pile group with the same volume are calculated and compared. Due to the lack of numerical studies and modeling by software for conical piles compared to laboratory tests in this field, in this research, the modeling of the ...
Education Level: Master's Degree, Field: Civil Engineering, Major: Structures Abstract: In this thesis, the effect of nanosilica on the mechanical properties and durability of concrete containing polypropylene fibers was investigated. Polypropylene fibers with a length of 18 mm and a ratio of length to diameter of 0.9 mµ were used. The effect of fibers and nanosilica in three ...
Master's thesis in the field of civil engineering, structure orientation Alkaline Aggregate Reaction [1] (AAR), is a chemical reaction that occurs in some concrete structures. (AAR) is a reaction between alkaline fluids in the pores and silica aggregates. Concrete failure, including expansion and cracking due to the alkaline reaction of aggregates, is of particular importance. ...
Master's thesis in the field of civil engineering, soil mechanics, and abstract excavation projects in urban areas are always at risk. Therefore, a suitable safety margin should be considered in the design of the guard structure. Traditional slope stability assessment methods, which are usually based on empirical judgments such as the concept of confidence factor and limit ...
Doctoral Dissertation in the field of Civil Engineering - Water and Environment Abstract Network methods are among the most widely used groundwater modeling tools that have been widely spread and accepted in the last two decades. On the other hand, the advancement of computing power of computers and the ease of access to them have led to the rapid development of numerical ...
Introduction In today's era, the presence of waste materials resulting from various physical and chemical processes is one of the important problems of industrialized and developing countries. So that extensive research is being carried out for methods of recycling or disposing of them to minimize the damage to the environment. In this regard, construction researchers, like ...
Dissertation for Master's Degree in Physical Education (M.A) majoring in Sports Management Abstract The aim of this research was to locate sports places in Talash city using AHP in GIS environment. The statistical sample of this research includes all the sports venues of Talash city, both public and private, including 40 sports venues. Descriptive data was collected using ...
Master's Thesis in Chemical Engineering (Gas Orientation) Abstract Laboratory Investigation of Gas Dehumidification Using Triethylene Glycol Solution in Hollow Fiber Membrane Contactors In this study, two hollow fiber membrane contactors with different types of Polyvinylidene Fluoride (PVDF) and Polypropylene (PP) fibers have been used for gas dehumidification by Triethylene ...
Master's thesis in the field of chemical engineering, abstract of the design of the Driso ring base and the use of hydrocarbon solvent in the dehumidification process in Farashband refinery, water vapor is one of the most important impurities in the flow of natural gas. Usually, the water vapor itself is not a problem, but instead the liquid or solid phase that forms when the ...
A master's thesis in the field of civil engineering - hydraulic structures Abstract Liquid storage air tanks are used not only to store water, but also to store chemicals and toxic substances in different forms. Considering the use of these structures in civil and urban development and industrial networks, their importance is determined before and after the earthquake. The ...
Master's Thesis in Civil Engineering (Soil and Foundation) Abstract Dense sand piles have been used since 1950 in Japan and then in other countries of the world as one of the most effective and economical methods in strengthening soil in order to prevent liquefaction, increase bearing capacity and improve soils with different grain sizes. The process of implementing dense sand ...
In order to obtain a master's degree in chemical engineering, abstract freezing of fans in operational units, including the hydrogen unit of Imam Khomeini Shazand Refinery in the cold seasons of the year is one of the important problems in this refinery. In order to provide a suitable solution to this problem, we must have a suitable estimate of the fan outlet temperature. The ...
Presented to graduate education management as part of the academic activities required to obtain a master's degree in the field of mechatronics. Abstract As you know, air conditioner is a high consumption device and has a Freon refrigeration cycle. What drew the companies to the production of inverters was to solve the shortcoming of air conditioners in high energy consumption. ...
Dissertation for Master's Degree in Power Electrical Engineering Abstract In this thesis, a hybrid power generation system using fuel cell/battery/supercapacitor to power a light electric vehicle with independent excitation electric motor drive system was studied and simulated. The electric vehicle system consists of a feed and control system, multiple sources, power control ...
Master's thesis in the field of chemical engineering, abstract of the laboratory study of iron oxide production on a microstructural scale using the precipitation method with supercritical anti-solvent by: One of the problems of cement used in oil wells, which are used to connect wall pipes and well walls, is that these cements do not have the desired resistance against high ...
Dissertation for Ph.D. Ph.D. Persian Summary Aripiprazole is an atypical antipsychotic drug that shows its therapeutic effect with a combination of antagonistic activity of 5-HT2A receptor and partial agonistic activity of 5-HT1A and D2 dopamine receptors. This drug is used in the treatment of schizophrenia, type I bipolar disorders and as an adjunctive treatment in major ...
A master's thesis in the field of chemical engineering, abstract of the laboratory study and modeling of calcium carbonate production from calcium chloride solution by absorbing carbon dioxide from industrial exhaust gases, by the efforts of Amin Alamdari, the effect of carbon dioxide concentration on the precipitation of calcium carbonate species and the kinetics of calcium ...
Dissertation to receive a general doctorate degree Abstract Introduction and purpose: Since 1980, new groups of antibiotics called oxyimmunocephalosporins, which were resistant to the hydrolytic activity of beta-lactamases, were used to treat gram-negative bacterial infections. In the early 1990s, extended-spectrum beta-lactamases (ESBLs) produced by gram-negative bacteria ...
Dissertation to receive master's degree in organic chemistry Keywords: Farsi: Besparash, condensation, composite, nanocomposite, anchoring Nitrogen in bonding with metals can destroy them
Master's Thesis in Chemical Engineering (Process Simulation and Control) Abstract Modeling and Simulation of the Electrostatic Desalination Process of Crude Oil by Elham Ariafard The aim of this research is to model the desalination process of crude oil based on the population balance method. For this purpose, the one- and two-stage electrostatic desalination process, which ...
Master's thesis in the field of chemical engineering. Abstract of the laboratory study of cadmium removal from drinking water. Today, the pollution of natural waters with heavy metals has caused concern in many countries of the world due to the destructive effects it has on living organisms. Cadmium enters drinking water through sewage and erosion of mineral rocks and effluents ...
Dissertation for receiving a general doctorate degree Abstract Introduction and purpose: Metallobetalactamases (MBL) are enzymes that are produced by non-fermenting Gram-negative bacilli such as Pseudomonas aeruginosa and make these strains resistant to carbapenems. As a result, Pseudomonas carrying metallobetalactamase genes are considered a serious clinical threat. Considering ...
Master's Thesis in Electrical Engineering, Power 1-1 Introduction Energy supply sources in the last few decades have been from fossil sources, which until recently have been obtained almost cheaply. Cheap energy sources caused that the optimal use of energy and energy recycling were practically not paid much attention. Due to the energy shortage crisis and the sense of danger ...
Master's thesis in the field of chemical nanoengineering, abstract modeling of chloride ion removal from gas condensate using nanofiltration of chloride ion in gas condensate can cause severe corrosion of equipment and pipes. Therefore, it is necessary to remove it from the condensate flow. The aim of this work is the mathematical modeling of the nanofiltration process for the ...
Master's thesis in the field of chemical engineering without major. Abstract: Modeling, simulation and optimization of Jam Petrochemical Check Bed Reactor for hydrogenation of 1 and 3-butadiene. Therefore, a suitable kinetic model has been selected as a basic structure for modeling the reactor, and after that the presented model has been developed in order to match the molar ...
Mechanical Engineering Master's Thesis Proposed Design - Introduction The use of fibers in concrete started about 50 years ago and day by day their use in various fields has increased. Adding fibers to the mixing design improves the mechanical properties of concrete and the behavior of the structure after cracking. It also increases the softness and malleability of the section. ...
Master's Thesis in Mechanical Engineering, Applied Design, Abstract In this research, an analytical solution is presented to show the size dependence and the effect of temperature difference on nonlinear free vibrations and post-buckling behavior of microtubes containing current. Based on Euler-Bernoulli model, strain gradient theory, Couple's stress theory and von-Carman ...
Master's Thesis Abstract In this project, the coat cracker unit of Abadan refinery has been simulated using Hysys refinery software. In simulating and receiving information, feed properties and solving mass and energy balance equations have been used. Simulation data and operational data of Abadan Cat Cracker unit have been compared. Also, by changing some important operational ...
Master's Thesis, Energy Conversion, Abstract: In this project, we will numerically investigate a stable gas flow in a microchannel with a rectangular cross-section. The flow with a certain temperature enters the channel with a constant temperature wall. Momentum and energy equations are discretized and solved numerically. Discretization has been done by FVM method and ...
Thesis for obtaining a master's degree in the field: Agricultural Engineering, specialization: Agriculture, abstract of underground drainage of paddy fields with the purpose of drying. The land is constructed at the time of harvest (increasing the tolerance of the soil), mid-season drainage and lowering the water table level after rice harvesting (for autumn and winter ...
An academic thesis for obtaining a master's degree in agriculture majoring in agriculture, investigating the effect of the amount of ripening and the number of harvests on the quantitative and qualitative yield of pvh19 tobacco production. Abstract In order to investigate the effect of the amount of ripening and the number of harvests on the quantitative and qualitative yield of ...
Field of study: Mechanics, orientation: energy conversion. The present research was conducted in order to investigate the movement of pig in pipelines. Due to the importance of pipelines in providing energy resources in the world, after installation and operation, the maintenance of these lines is of high importance, which has caused special attention to be paid to the design of ...
Abstract Background and Purpose: Emulsions are an important part of most food, pharmaceutical and cosmetic systems, which are very important in various industries due to their special rheological and physicochemical properties. But the main limitation of these systems is their thermodynamic instability, which causes phase separation over time. In this research, the effect of ...
Dissertation for Master's Degree in Electrical-Electronic Engineering (M.Sc) Abstract Sulfur recovery process by Klaus method is one of the most common methods of separating elemental sulfur from acid gas resulting from the sweetening process in gas and oil refineries. But due to the complexity of this process and the multivariable nature of the reaction furnace and the lack of ...
History of Aluminum Rolling Company 1- Introduction of Arak Aluminum Rolling Company in 1351, 2 km from Arak-Aqran road, on a land with an area of ??22 hectares, approximately 1.2 hectares of which is under the factory building and administrative role, and 2 hectares of which is green and open space, which is the development and expansion and renovation of Iran's industries. ...
Master's thesis in the field of mechanical engineering, energy conversion trend. Abstract: Considering that heat transfer is widely used in various fields of science, it is necessary to use wide recessed or raised surfaces due to physical and spatial limitations in electrical systems. The main purpose of using these surfaces is to increase heat transfer by increasing the ...
Dissertation for M.Sc Master's degree, mechanical engineering-applied design Abstract With the emergence of composite materials, a huge progress was achieved in many engineering applications. Nevertheless, problems such as delamination, stress concentration, and discontinuous distribution of stress, the idea of ??creating a new type of composite materials in which properties ...
Dissertation for M.Sc. Mechanical Engineering - Manufacturing and Production Trend Abstract The manufacture of square and rectangular pipes has received more attention due to their wide use in industries that require high pressure and temperature. There are different methods for making rectangular tubes, including extrusion, stretching and pressing. Another method that has been ...
Mechanical Engineering (Tendency to Energy Conversion) Abstract: Investigating the disadvantages of urban water supply networks (as an example of the Langrod water network) and optimizing and designing the optimal network for a specific region using the HBMO honey bee matching algorithm. Due to the global water crisis, today a special approach to the design and optimal use of ...
Dissertation for M.Sc., Energy Systems Engineering - One of the most important issues related to the environment in the oil, gas and petrochemical industries is the proper disposal of waste hydrocarbon gases in industrial units and complexes. One of the most common methods available for the safe disposal of these gases is burning them in flares and releasing them into the ...