Download more than 100 examples of thesis, proposal and project topics about physical properties in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Thesis for the M.Sc degree in wood and paper industry engineering, Mehr 2013 Abstract: In this research, the physical and mechanical properties of nanocomposites obtained from cellulose nanofibers and poly polymers
Introduction In today's era, the presence of waste materials resulting from various physical and chemical processes is one of the important problems of industrialized and developing countries. So that extensive research is being carried out for methods of recycling or disposing of them to minimize the damage to the environment. In this regard, construction researchers, like ...
Dissertation for Master's Degree in Food Science and Engineering, Food Microbiology, Abstract: Today, the increase in environmental pollution and the decrease in oil resources have led to the development and replacement of biodegradable packaging instead of packaging derived from petroleum resources. Also, in this regard, the use of antimicrobial compounds such as silver ...
Thesis for receiving a master's degree in the field of agricultural engineering, food science and food industry, food technology, abstract. Halva in Iran, despite its high potential in diversity and creating added value, has not been industrially produced to date, and the purpose of this research is to investigate the formulation of wheat flour halva and its production and ...
Dissertation for Master's Degree in Animal Science Abstract: In order to determine the chemical composition and physical properties of the second layer of alfalfa fodder in West Azarbaijan province, 72 samples were collected based on randomly classified sampling according to the amount of precipitation in 3 climates (treatments) including: 1) the northern basin of Urmia Lake ...
Dissertation to receive the master's degree ""M.S.c"" specialization: Textile chemistry and fiber science Abstract: One of the important processes in the completion of textile goods is the underhand improvement in textiles. Finishing the softener provides a desirable softness to the fabric and improves its properties, and the main goals of the softener are to reduce static ...
In order to receive a master's degree in textile technology, it is essential to know the physical and mechanical properties of carpets to produce a quality product and maintain the proper appearance. In this research, an attempt has been made to provide a model to determine the relationship between the different parameters of these characteristics, therefore, to measure these ...
Dissertation for Master's Degree (M.Sc) Major: Applied Chemistry Persian Summary The purpose of this research is to investigate common fatty acids in ostrich oil and determine the amount of retinol in snail secretion to make a cream with therapeutic properties. Since 3000 years ago, the healing properties of ostrich oil have been known to treat wounds, burns, joint pain and skin ...
Master's Thesis / Inorganic Chemistry Abstract Considering the application of nonlinear optical properties (NLO) in technologies such as lasers, remote communication, photovoltaic cells, information processing and holography and the mineral diversity of these materials, we started a research in this field and focused on borazine-containing dyes. Our main goal in this research is ...
Thesis for obtaining a master's degree. Abstract: The increase in environmental concerns and the progress of green chemistry processes have necessitated the replacement of homogeneous catalysts with heterogeneous ones. In this research, activated carbon was used as a suitable substrate due to its special properties. The most important of these properties are resistance in acidic ...
Dissertation for Master's Degree in Chemical Engineering Abstract Critical characteristics for materials such as critical temperature, critical volume and critical pressure are important characteristics for predicting many thermodynamic properties of different materials. Knowing the critical properties plays an essential role in all hydrocarbon production and process operations. ...
Dissertation Chemistry for Master's Degree Abstract Acrylic-based pressure-sensitive adhesives are more expensive than rubber-based adhesives, but they have a longer life and resistance to high temperatures, chemicals, UV rays, solvents, light, softeners, and the environment. Modification of acrylic pressure-sensitive adhesives is useful for improving adhesion properties. In ...
Master's thesis in the field of polymerization engineering, abstract was determined by using experimental design methods to determine the optimal feed recipe for the preparation of nitrile rubber. Initially, to determine the factors affecting the rate of polymerization, screening tests were designed according to the Plate-Boorman method, which examines a large number of factors ...
Master's Thesis of Polymer Science and Technology Engineering Abstract Urethane-acrylate resins are of interest due to their low viscosity and flame retardant properties and relatively easy curing. On the other hand, natural fibers with renewable resources, low price, low density and high special properties have a special ability to be used in composites. However, their ...
Master's Thesis of Polymer Industrial Engineering Abstract Cross-linked polyethylene is one of the materials that is widely used in the field of insulation production in cables due to having suitable electrical properties and good electrical strength. Nowadays, one of the methods of optimizing the properties and changing the behavior of polymers is the use of filler particles ...
Dissertation for receiving a master's degree in the field of preservation and modification. Abstract In this research, the effect of combined modification of colloidal silver-hot water on the heat transfer from the hot press plates to the heart of the beech (Fagus orientalis) chipboard cake, the physical and mechanical properties of the chipboard and the chemical changes of the ...
Master's Thesis of Polymer Industry Engineering Abstract Phenolic resins have excellent dimensional, thermal, chemical and corrosion resistance. Also, the fugitives produced during the thermal degradation of this resin have low toxicity and, in addition, they have high charring. Phenolic resins, due to having desirable properties, are used in many fields such as internal parts ...
Dissertation for Master's Degree in Agricultural Engineering, Horticultural Science-Fruiting tendency Abstract Grapes are non-dehiscent fruits with low physiological activity and are very sensitive to water loss and fungal contamination, especially gray mold, during the post-harvest period in the warehouse and during transportation as well as marketing. In the present study, the ...
Dissertation for obtaining a doctorate degree in the field of mechanical engineering - manufacturing and production: the advantages of using semi-solid processes are reducing the amount of gas porosity and shrinkage and modifying the microstructure, which aims to improve the mechanical properties of the part. In this research, the cooling ramp method has been used to produce the ...
Dissertation for Master's Degree in Food Science and Engineering. Abstract Every year, millions of tons of plastic waste, including bags, plastic envelopes, and packaging materials, enter the environment and cause problems to the environmental cycle due to their irreversibility, and as a result, the need for degradable plastics in nature is increasing day by day. Today, the ...
Dissertation for Master's Degree (M.Sc.) in Agricultural Engineering, Food Science and Industry, Yogurt is the most famous and widely consumed fermented milk product in the world. The most common defect in texture that leads to the non-acceptance of this product by the consumer is water loss. Today, in Iran, condensed yogurt is mostly produced in the reverse way, that is, by ...
Dissertation for obtaining a master's degree in civil engineering, structural orientation, March 2013, abstract of the scope of using FRP materials for shear strengthening of reinforced concrete beams in
Master's Thesis of Faculty of Art and Architecture, Department: Carpet (Painting), October 2013 Abstract: Today, in today's advanced and industrialized world, using new methods, it is trying to make Tul products
Dissertation for M.Sc degree in soil and soil mechanics engineering, summer 2013, first chapter, introduction of micro candles 1-1 Micro-candles in general in dealing with problematic soils
Dissertation for Master's Degree in Polymer Industry Engineering April 2013 Abstract Nowadays, the topic of energy and energy saving in all fields, even in homes, is one of the most important.
Chapter 1 1-1-Introduction: Common fluids such as water, oils and ethylene glycol, which are usually used as heat transfer media, have a limited ability in terms of thermal properties, which is the first obstacle to compress and increase the efficiency of heat exchangers. One of the ways to improve heat transfer is to add particles to the fluid. This method is used for fluids ...
Dissertation for Master's Degree in Geography and Rural Planning Abstract Rural spaces are part of human societies and sustainable and integrated national development is aimed at sustainable development at the regional, urban and rural levels. In this regard, the second, third, and fourth economic, social, and cultural development plans have made rural development one of its ...
Dissertation to receive a master's degree in educational technology (M.A) Abstract This research was conducted with the aim of investigating the effect of TEAL on learning and memorization of high school chemistry course. The research method was based on quasi-experimental nature with a pre-test-post-test design and a control group. The statistical population in this research is ...
Master's Thesis in Psychology - Assessment and Measurement Abstract The psychometric properties of Harry's stress questionnaire were examined after translation and validity of appearance and content were checked with factor analysis method. A sample of four hundred people from Tehran city were selected by simple random method and available sampling and completed the 66-question ...
Chapter 1: Overview of the research Foreword Today, cities are growing rapidly and have presented themselves as the first human settlement. This trend is related to the recent centuries, especially after the industrial revolution, which caused many problems in the physical and population growth of cities. In response to these problems, various plans were implemented, perhaps the ...
Dissertation for receiving the master's degree ""M.A."" Abstract In the last two decades, we have moved towards an economy where investment in human resources, information technology, research, development and advertising seems necessary in order to maintain competitive advantage and environmental guarantee of organizations. Therefore, it can be said that the source of creating ...
Computer Software Engineering Master's Thesis Abstract: Presenting a method for identity recognition based on the feature of the fractal dimension Introduction: There have been many techniques for identifying people since long ago. Meanwhile, biometric-based identity recognition systems are more accurate and reliable. These systems should be designed in such a way that they can ...
Dissertation for M.A. Orientation: Natural Geography (Geomorphology-Hydrology) Abstract The increasing population growth followed by the development of industrial activities on the one hand and non-compliance with environmental requirements on the other hand, has caused huge amounts of pollutants to enter the environment in the last few decades. Accumulation of some dangerous ...
Dissertation for M.Sc Master's Degree in Remote Sensing and Geographical Information System - Water and Soil Resources Abstract: Urban heat islands are areas of the earth's surface that have a higher temperature than neighboring areas. The spread of this phenomenon varies in space and time. The creation of thermal islands and its spatial and temporal changes are mostly ...
Dissertation for Master's Degree in Physical Education, Sports Physiology, Introduction Today, there is fierce competition between athletes in different countries to win championship titles in the Olympic, World and Continental Games, and the effort to improve the performance of athletes has made sports scientists to work more in this field and has increased research in sports ...
To receive a master's degree in textile technology engineering. Abstract In the previous research, multi-sized nano-roughness was developed using nanoparticles with different sizes and different surface charges along with silicone resin coating to produce multi-purpose textiles with stable properties. In this research, the idea of ??using laser irradiation and finishing textiles ...
Dissertation for Master's Degree in Computer Science (M.Sc) Software Orientation Abstract Smart phones and other mobile devices are becoming an ideal platform for continuous measurement of user activities by a large number of embedded sensors. In this way, energy consumption has become the most important challenge for mobile devices. Individual activity detection on smart phones ...
In order to obtain a master's degree in the field of civil engineering - soil and foundation orientation, Abstract Nowadays, circular foundations are more or less used for structures, especially structures that have axial symmetry. In this research, a numerical study was conducted on bearing capacity and settlement of annular foundation. PLAXIS software was used for modeling. ...
Doctoral Dissertation of Soil and Foundation Mechanics Abstract In this research, the discrete element method was used to analyze the wave propagation and investigate the factors affecting the wave speed in granular soils. The method of separate elements is important due to the possibility of preparing completely similar samples and checking the effect of changes of a certain ...
Dissertation for receiving the master's degree ""M. Sc."" Field: Agricultural Engineering Major: Water Structures Abstract The sediment transfer process is a completely complex, variable and non-linear phenomenon. So that the behavior of the river in the sediment transfer capacity for a certain discharge is different in different times. Therefore, due to the complexity of the ...
Dissertation for Master's Degree in Civil Engineering, Soil and Foundation Mechanics Abstract: Since many structures are built in dense urban areas, there is an increasing need to build buildings and geotechnical structures on soft clay soils. Clay soils usually show significant creep deformation. Although a lot of research has been done on the creep behavior of natural clay, ...
Dissertation for Master's Degree in Civil Engineering - Soil and Foundation Mechanics Abstract The purpose of this research is to improve the mechanical and geotechnical properties of windy sand soils. Because one of the major problems of windblown sand is its low resistance under natural and saturated moisture conditions, a laboratory study was conducted to investigate the ...
Dissertation for Master's Degree in Civil Engineering - Earthquake Engineering Abstract The city of Birjand, as the capital of South Khorasan province, is located in the structural zone of Sistan, which is particularly sensitive due to its proximity to seismic and fundamental faults (Neh Khawri and Westi faults in the south, Ardkol fault in the northeast, Nawaz fault in the ...
Dissertation for master's degree in the field of civil engineering, road and transportation, the abstract of asphalt failures is one of the problems that are the concern of road and transportation engineers today, and every year huge costs are spent on the maintenance and repair of asphalt roads. Many efforts have been made to increase the strength and life of asphalt, among ...
Master's Thesis in Civil-Soil Field Abstract Dense clay layers are used as one of the most common impermeable layers in most geotechnical structures such as earthen dams and municipal and radioactive waste disposal centers. Due to special geotechnical characteristics, these layers are damaged by cracking during their lifetime, these cracks increase the permeability of the layer ...
Dissertation for Master's Degree in Civil Engineering with Earthquake Orientation Abstract: Semi-rigid joints [1] are joints whose hardness is between the two states of grip and joint and transmit a part of the anchor, in other words, its degree of rigidity is between 20% and 90%. In this thesis
A master's thesis in the field of electrical engineering - field telecommunications, abstract, investigation and analysis of leaf reflective structures in the field of plasmonics for the application of passive components in the design of optical integrated circuits, limits the diffraction limit of the miniaturization of optical elements. Surface plasmon polaritons that propagate ...
Dissertation for Master's Degree in Mechatronics Abstract In this thesis, a phase-locked loop is designed based on micro-electromechanical systems. The loop system has a feedback phase lock that compares the input phase with the output phase. This comparison is done by a phase detector. Phase detector is a circuit whose average output voltage is linearly proportional to the ...
Civil Engineering Master's Thesis - Soil and Foundation Mechanics Abstract From the past until now, one of the most economical methods to improve the mechanical properties of clay soils has been stabilization by means of additives such as lime and cement in construction projects such as road construction and consolidation of building foundations. Also, with the passage of time ...
Civil Engineering Master's Thesis, Soil and Foundation Engineering Abstract In this thesis, in order to analyze the behavior of surface foundations based on reinforced soil, a simple physical method based on the resistance of materials called ""cone method"" is used, which is actually used as an alternative to the exact solution methods that are based on the three-dimensional ...
Dissertation to receive the master's degree ""M.Sc. Orientation: ""Biochemical Engineering"" Abstract: The presence of sulfur compounds in gasoline creates a serious problem in air pollution, environment, corrosion of equipment and destruction of human health. The new environmental standards also impose strict limits on the amount of sulfur and aromatic compounds in gasoline. ...
Dissertation for obtaining a master's degree in chemistry, fluoride has been known as a toxic ion for many years. The main source of fluoride in aqueous solutions is minerals containing fluoride and the industrial activities of factories. According to the report of the Environmental Protection Organization, the amount of fluoride more than 1 mg/liter causes various diseases. In ...
Dissertation for Master's Degree (M.A) Major: Sports Biomechanics Abstract Objective: In recent years, the use of permitted sports supplements has become one of the most important parts of an athlete's preparation to participate in the field of competition. Despite the many researches that have been conducted in the field of supplements, there is no general consensus on ...
Thesis for obtaining a master's degree in the field: Chemistry, with a focus on preface. Computational chemistry is a new approach to known and familiar physical and chemical phenomena that can lead to a better understanding of the world around us. Today, with the increasing progress of computers, we are able to study various phenomena in very complex matrices such as biological ...
Master's thesis in the field of inorganic chemistry Abstract In this thesis, we investigate the anticancer diamine ruthenium complexes by computational chemistry, which examines the following: energy analysis, which examines the absolute energy value, dipole moment, isotropic and anisotropic polarizability of the complex. 2- The analysis of the frontal orbitals, the energy of ...
Dissertation for receiving the master's degree ""MSc"" specialization: applied chemistry Farsi abstract of the thesis or dissertation (including: summary of objectives, implementation methods and results obtained in maximum 10 lines): The possibility of manipulating matter at the nano level was first proposed in written form by Richard Feynman. During his conference called ...
Dissertation for receiving a master's degree, specialization: food industry, abstract of osmotic dehydration, the process of removing water is based on the placement of food materials in a hypertonic solution. In this research, the combination of osmotic dehydration process for carrot pieces with a thickness of 0.5 cm at a temperature of 60 degrees Celsius and time intervals of ...
Master's thesis in the field of chemical engineering (gas engineering trend) in recent years, many horizontal wells have been drilled around the world. The main reason is the ability to increase the level of the tank in contact with the well, which increases the utilization of the well. Well testing is used to identify the models of hydrocarbon reservoirs and to identify their ...
Master's Thesis in Nano Chemical Engineering Abstract The aim of this study is to separate cationic polyacrylamide from the waste water of Prodeh Tabas coal washing plant using the polymer membrane filtration process. The primary membrane was prepared using polyacrylonitrile (PAN) by phase inversion process, and then they were prepared using hydrolysis as chemical modification ...
Dissertation for receiving a master's degree, specialization: food industry, abstract of osmotic dehydration, the process of removing water is based on the placement of food materials in a hypertonic solution. In this research, the combination of osmotic dehydration process for kiwi pieces with a thickness of 0.5 cm at a temperature of 60 degrees Celsius and time intervals of ...
Doctoral Dissertation in the field of Civil Engineering - Water and Environment Abstract Network methods are among the most widely used groundwater modeling tools that have been widely spread and accepted in the last two decades. On the other hand, the advancement of computing power of computers and the ease of access to them have led to the rapid development of numerical ...
M.Sc. Dissertation for Master Degree in Chemical Engineering - Process Engineering Abstract Mercaptans are removed from hydrocarbon streams by various methods. The use of caustic soda solution and mucoli sieve beds are among the most widely used methods. In the oil and gas industries of our country, washing with relatively dilute caustic solution is often used to remove light ...
Abstract Gas hydrates are a group of solid host compounds that play an important role in many processes such as gas storage, transfer and separation, heterogeneous catalysis and water purification. These crystals are formed at a temperature higher than the freezing point of water and high pressure. There are different methods to calculate the free energy difference: 1) ...
Dissertation for Master's Degree in Neonatal Special Care Nursing Field and Objective Iran is one of the regions with high prevalence of premature birth, and almost 10% of births are premature babies. In addition to the initial costs of hospitalization and care of these babies, other negative consequences await him after hospitalization in the neonatal intensive care unit. ...
Dissertation for receiving a master's degree in the field of physical education in the field of sports physiology. Abstract: Athletes have been continuously searching for solutions to improve their sports performance. One of the methods that can develop sports performance and prepare athletes physically and mentally for sports activities is the use of herbal supplements. The aim ...
Dissertation for Master's degree (M.A.) Major: Sports Physiology Abstract of the thesis (including summary, objectives, implementation methods and results obtained): The purpose of this research was to study the effect of the combination of resistance training and water thistle extract on liver enzymes in healthy male rats, and according to the objectives and nature of the ...
Dissertation for Ph.D. Persian Abstract Opioid system can interfere with various neurotransmitters such as dopaminergic, serotonergic, GABAergic, glutamatergic and noradrenergic system. It has been shown that opioids (such as morphine) cause an increase in the amount of dopamine in the mesolimbic system, and increasing the amount of dopamine in the nucleus accumbens plays a key ...
Master's thesis in the field of chemical nanoengineering Abstract The synthesis of silicon dioxide nanoparticles from silicon oil waste using the synthesis method of silicon dioxide nanoparticles [1] has many industrial applications. The industrial use of these particles in traditional fields as well as new fields is expanding, for which new applications are continuously found. ...
Master's thesis in the field of physical education and sports sciences, sports biomechanics, abstract: flat feet are among the most common abnormalities. Anatomical abnormalities can change the kinematic variables of the foot joints, which results in a different walking pattern. Identifying the quality and quantity of the variables affected by these anomalies is effective in the ...
Dissertation for receiving a doctorate degree in the field of physical education, sports biomechanics, abstract: Osteoporosis is a skeletal disorder in which the mechanical strength of bones is reduced and leads to bone fractures, so it is important to pay attention to methods to maintain bone strength and prevent osteoporosis. The aim of this research was to determine the ...
A master's thesis in the field of chemical engineering, abstract of the laboratory study and modeling of calcium carbonate production from calcium chloride solution by absorbing carbon dioxide from industrial exhaust gases, by the efforts of Amin Alamdari, the effect of carbon dioxide concentration on the precipitation of calcium carbonate species and the kinetics of calcium ...
Academic Dissertation for Master's Degree in: Organic Chemistry 1-1) Introduction Today, nanotechnology [1] is an attractive subject that has attracted the attention of scientists, industrialists and even ordinary people due to the special properties and practical potentials of these materials. Considering the wide applications of carbon nanotubes, the methods of mass production ...
Dissertation to receive a specialized doctorate degree in the field of oral diseases Abstract: Mucositis or inflammation of the mucous membrane is one of the early side effects of radiation therapy, which can cause ulcers in the oral mucosa and sometimes the inability to eat despite common treatments. Therefore, the use of compounds with a pleasant and acceptable smell and ...
Dissertation for Master's Degree in Physical Education and Sports Sciences - Sports Physiology Abstract: Background and Objective: During metabolic changes during pregnancy, the mother's contact with heavy metals is considered very important for placental function and fetal health. But it has been assumed that endurance training by affecting the activity of metalloproteins such ...
Dissertation for receiving the degree of Doctor of Dentistry, Dental Materials Research Center Abstract Objective: One of the objectives of this study was to investigate the fracture resistance of the teeth coated with various crown and root restorations. Materials and methods: 60 freshly extracted human premolar teeth were selected and randomly divided into five groups of ...
Dissertation to receive a general doctorate, abstract, introduction and purpose, among the banding problems in orthodontics, is the creation of decalcified areas around the bands. On the other hand, during the treatment, the bands are prone to loosening and the cement used must have sufficient strength. Recently, new compounds containing amorphous calcium phosphate (ACP) have ...
Master's thesis in the field of mining chemistry Abstract: In this study, the effect of amide substitution on the surface of graphene oxide was studied. Two amines were chosen to change the contact surface and absorption rate. of a linear diamine such as ethylenediamine[1] and cyclic amine 6-aminouracil[2] with two different characteristics were evaluated. After the synthesis ...
Master's thesis in the field of chemistry, Analytical Chemistry, Abstract In this project, a molecular template polymer was prepared for the selective extraction of phenylmercury chloride. To prepare this polymer, methacrylic acid (active monomer), ethylene glycol dimethacrylate (cross-linking agent), 2,2-azobisisobutyronitrile (initiator), phenylmercury chloride (target ...