Download more than 100 examples of thesis, proposal and project topics about numerical modeling in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Thesis - Master's Degree in Geophysics - Winter Seismology 2012 Abstract In this research, the effect of a branch fault in a subduction zone on tsunami waves using numerical modeling of tsunami waves.
Master's thesis in the field of civil engineering, structural orientation. Abstract In this study, the evaluation and comparison of nonlinear and numerical analysis of deep reinforced concrete beams with openings without reinforcement with deep concrete beams with openings reinforced with FRP sheets and deep reinforced concrete beams without openings by Abaqus finite element ...
An academic thesis for receiving a master's degree in chemical engineering, environmental orientation. Among the models that are able to make successful predictions for the performance of reverse osmosis membranes, that is, the amount of separation and flow flux in a wide range of physical conditions (membrane and solution) and laboratory conditions (pressure and concentration), ...
Master's thesis in the field of road, building and environmental engineering - hydraulic structures Abstract In this research, nonlinear wave differential equations are solved by the local RBF-DQ numerical method. These differential equations are in the form of Laplace's equation (as a governing equation) and nonlinear boundary conditions on the free surface; The basis of the ...
In order to receive a master's degree in civil-soil and soil engineering in March 2013, abstract, different methods are used to stabilize pits, among them nailing method and ink method.
Dissertation for Master's Degree in Polymer Industry Engineering April 2013 Abstract Nowadays, the topic of energy and energy saving in all fields, even in homes, is one of the most important.
To receive a master's degree in polymer engineering - polymer industries, May 2013 abstract With the progress of various sciences and knowledge, the boundaries of knowledge have converged and in some fields we are witnessing
Dissertation for Master's degree M.se field of remote sensing and geographic information system - water and soil resources Abstract: The phenomenon of dam failure has a catastrophic potential. Therefore, it is important to estimate the hydraulic parameters of flood waves in order to predict risks and manage resources and facilities and save human lives. Therefore, the issue of ...
Dissertation for Master's Degree in Civil Engineering - Abstract Hydraulic structures in high dams of spillways, as one of the dependent hydraulic structures, have the important role of discharging the incoming floods into the dam reservoir with sufficient safety in free flow or under pressure downstream. In tunnel overflows where the flow is at a high speed and often under ...
M.SC Master's Thesis in Civil Engineering, specialization: hydraulic structures. Abstract Due to its special geographical location, Bandar Lange has been operating as a cargo and passenger transit station since the distant past. During the past years, this activity has raised expectations from it, so that its development plan has been implemented. Foresight in the development of ...
Master's thesis in the field of civil engineering, soil and foundation, in this research, the bearing capacity of the conical pile group and the cylindrical pile group with the same volume are calculated and compared. Due to the lack of numerical studies and modeling by software for conical piles compared to laboratory tests in this field, in this research, the modeling of the ...
Doctoral Dissertation in the field of Civil Engineering - Water and Environment Abstract Network methods are among the most widely used groundwater modeling tools that have been widely spread and accepted in the last two decades. On the other hand, the advancement of computing power of computers and the ease of access to them have led to the rapid development of numerical ...
Civil engineering, soil and foundation, abstract, considering that all engineering infrastructures and vital urban and non-urban places and arteries such as: foundations of buildings, bridges, silos, dams, retaining walls, marine structures, industrial facilities, etc. . . All spread on a platform called the earth. The importance of investigating the type of instability in ...
Master's Thesis in Chemical Engineering, Thermodynamics and Kinetics Abstract: A major part of the final properties of the product in emulsion polymerization is determined by the particle size distribution. In this project, an accurate model based on population balance equations (zero-one model) which includes the phenomena of nucleation and particle growth has been chosen to ...
Dissertation for obtaining the master's degree ""M.Sc."" (Chemical Engineering - Thermodynamics and Kinetics) Abstract: Keywords: Computational fluid dynamics, bubble, continuity and failure, floating bed reactors, multiphase systems, vertical vertical flows, PBM, DQMOM, recently liquid gas floating bed reactors have received attention due to their wide application in chemical, ...
Dissertation to receive a master's degree in the field of chemical engineering, thermokinetic orientation. Abstract With the increase in the use of fuel cells in the industry and as an on-site application, there is a need to develop production units on the site of hydrogen. In this research, a monolithic catalytic reformer in which autothermal reforming of methane takes place is ...
Master's thesis in the field of electrical-power engineering Abstract: The ground system refers to a set of conductors with different structures that are placed in the ground to protect equipment, human safety against electrocution, prevent unwanted overvoltages and damage to HV equipment. The importance of earth resistance is because it plays an important role in protecting the ...
Master's Thesis for Master's Degree Abstract Carbon nanotube can be considered the most amazing nanostructured material discovered so far. Unique features such as high strength, light weight, and high energy absorption capability have made this material recently attracted the attention of scientists in making bulletproof vests. In this thesis, a structural model in the Abaqus ...
Dissertation in order to receive a Master's Degree in Rock Mechanics Abstract In open pit mining where many steps are created, it is necessary to conduct stability studies of the wall slope. By increasing the slope angle of the mine, the ratio of tailings removal is reduced, which will save the overall costs of the mine, but on the other hand, it will reduce the safety, in case ...
Dissertation for M.Sc. Mechanical engineering trend - applied design In this research, a wind turbine with a vertical axis of the Savonius model is modeled. The wind turbine has been modeled in the fluid control volume, which is the same as the wind tunnel in real conditions, and has been investigated under wind blowing with different speeds. Also, in terms of overlap ratio, it ...
Dissertation for obtaining a master's degree in civil engineering, structural orientation, March 2013, abstract of the scope of using FRP materials for shear strengthening of reinforced concrete beams in
Thesis of master's degree in civil engineering, soil and foundation mechanics orientation, September 2019, abstract: analysis of dynamic interaction between soil and structure (due to the mutual effect of the structure and its retaining soil on each other), D
endname? Rasht Master's Degree: Civil Engineering (M.S.C.) Focus: Hydraulic Structures Academic Year 2011-2012 Summary of the Minab River, the most important river of Khan? The fresh water is in Hormozgan province. this river
Doctoral Dissertation on Earthquake Geophysics Science, September 2012 Abstract In this treatise, several combined simulation methods are used in order to produce artificial maps of the earth's powerful movement. Based on this, there are two methods
In order to obtain a master's degree in the field of civil engineering - soil and foundation orientation, Abstract Nowadays, circular foundations are more or less used for structures, especially structures that have axial symmetry. In this research, a numerical study was conducted on bearing capacity and settlement of annular foundation. PLAXIS software was used for modeling. ...
Master's Thesis (M.sc) Civil Engineering, Soil and Foundation Mechanics Abstract In this research, the stability of soil reinforced with geogrid located on an underground cavity was analyzed using plaxis software, and the effect of several factors such as the number of geogrid layers, the length of the geogrid layer, the stiffness of the geogrid layer, the optimal location of ...
Doctoral Dissertation of Soil and Foundation Mechanics Abstract In this research, the discrete element method was used to analyze the wave propagation and investigate the factors affecting the wave speed in granular soils. The method of separate elements is important due to the possibility of preparing completely similar samples and checking the effect of changes of a certain ...
To receive a master's degree in civil engineering - water Abstract: Relaxation ponds should be designed in such a way that they can depreciate the potential energy stored in the reservoir water of dams and dams in such a way as to transfer it to the natural bed so as not to cause the loss of the bed and in critical conditions to destroy the pond and dam itself. In different ...
Dissertation for receiving a master's degree in civil engineering, soil mechanics, and the abstract of the contents, one of the most important and at the same time the most difficult topics in soil mechanics is the problem of the stability of gables. Analyzing the stability of soil slopes in order to determine the most probable rupture process or in other words to find the ...
Master's Dissertation of Discontinuous Structure Abstract: In recent years, the use of composite material in the construction and strengthening of structures has expanded greatly. The structure of this material is such that there is a possibility of crack formation between the layers. Due to the increase in load, these cracks grow and cause a sharp drop in the strength and ...
Master's Thesis Department: Civil Engineering (MSC) Specialization: Hydraulic Structures Abstract Minab River is the most important freshwater river in Hormozgan Province. This river is the drainage of the surface waters of the Minab catchment area, and two bridges have been built on it, the first one is the connecting road to Minab city and the second one is 1500 meters after ...
Master's thesis in the field of civil engineering, soil and foundation, today, due to the progress of the tunneling industry, the need to analyze and design underground structures in rocky environments is felt more than in the past. Although there are many numerical and practical software available in this field, none of them are complete and perfect in all fields, and each of ...
Dissertation for Master's Degree in Civil Engineering, Structures, Abstract: This thesis is the results of a numerical and parametric study on the effect of reinforcing reinforced concrete shear wall with FRP composite and applying the results of the finite element method. The finite element program is compared and calibrated against experimental data. Then, the numerical ...
Dissertation for master's degree in civil engineering, structural orientation. Abstract: Today, in earthquake-prone countries, it is recommended to use a variety of energy-depleting tools in order to dissipate the energy of earthquakes on the structure. One of these tools is rotational friction dampers. Because the current regulations do not provide a value for the coefficient ...
Dissertation of Master's Degree in Civil Engineering - Structure Abstract In metal structures, one of the most important places of stress concentration is the joint. In form cutting, the shear force at the connection point is so high that a part of the beam or its reinforcement is broken and separated in pieces, and this is due to negligence in the design of the connection or ...
Master's Thesis in Civil Engineering, Earthquake Orientation Abstract: Bridge structures are affected by various loads and are designed according to the level of risk that is considered for them. Explosive loading is one of the loads that threaten the health of bridges. It is necessary to evaluate the amount of damage and performance of bridges under the effect of this loading ...
Abstract Underground facilities are an integral part of modern society and are used for many applications, including subways and railway lines, highways, material storage and water and sewage transportation. is used Underground facilities built in areas affected by earthquake activity must withstand both earthquake and static loading. By reviewing the historical cases of ...
Dissertation for receiving M.SC Master's degree Major: Water Engineering Abstract: Dams are the largest man-made structures. Their design often stems from their unique nature and the consequence of failure, which is certainly greater than the collapse of other types of structures. The stability of dam body and foundation structures can be analyzed and checked in various ways. ...
Civil Engineering Master's Thesis, Soil and Foundation Engineering Abstract In this thesis, in order to analyze the behavior of surface foundations based on reinforced soil, a simple physical method based on the resistance of materials called ""cone method"" is used, which is actually used as an alternative to the exact solution methods that are based on the three-dimensional ...
Master's thesis in the field of road, building and environmental engineering - hydraulic structures. In this research, the effect of geobags on the scour control of bridge piers has been studied using Computational Fluid Dynamics (CFD) method. Geobags are geotextile bags that are filled with materials such as sand, concrete or materials from river dredging. Due to the ...
Master's thesis in the field of electrical engineering - power abstract of the possible analysis of dynamic stability of microgrids, considering wind turbines, in recent years, the high penetration of renewable energy sources, especially wind energy, in power networks has created new problems. One of the most important issues is the uncertainty in the power produced by wind ...
Master's thesis in the field of civil engineering - hydraulic structures Abstract: Rivers are one of the most important and common sources of drinking, agricultural and industrial water supply. These resources have many qualitative fluctuations due to passing through different platforms and direct connection with the surrounding environment. Therefore, predicting the quality of ...
Master's Thesis in Civil Engineering (Soil and Foundation) Abstract Dense sand piles have been used since 1950 in Japan and then in other countries of the world as one of the most effective and economical methods in strengthening soil in order to prevent liquefaction, increase bearing capacity and improve soils with different grain sizes. The process of implementing dense sand ...
Master's Thesis in Electrical Engineering, Power Orientation Abstract In this thesis, while investigating the phenomenon of saturation in protective CTs, the problems related to the detection of this phenomenon and the compensation of CT secondary current have been discussed, and in order to solve the problems raised, methods have been introduced and the results have been ...
Dissertation for receiving a master's degree in electrical engineering, electronics orientation. Chaos theory was founded at the end of the 20th century by Lorentz. Chaos science investigates non-linear systems and their behavior in different conditions. Since the systems around us are mostly non-linear, by creating feedback in them, they may show chaotic behavior, so chaos ...
Master's Thesis, Energy Conversion, Abstract: In this project, we will numerically investigate a stable gas flow in a microchannel with a rectangular cross-section. The flow with a certain temperature enters the channel with a constant temperature wall. Momentum and energy equations are discretized and solved numerically. Discretization has been done by FVM method and ...
Dissertation for master's degree in electricity, power orientation Abstract: In the past, the structure of energy production and consumption systems, such as electricity and natural gas, were independent of each other. But due to the ever-increasing growth of energy consumption and the development of control systems and the need for coordination between energy production and ...
Master's degree in electrical engineering, control orientation, electrical engineering, control orientation, abstract. Today, chemistry and oil and gas extraction and refining is one of the most important economic and productive support points of countries. One of the most common processes in refineries is the separation of chemicals. This is done using separator towers. The ...
The thesis for obtaining a master's degree in the field of mechanics, investigating and analyzing the free and forced vibrations of a multi-walled carbon nanotube placed in an elastic medium in order to achieve a clear mathematical understanding of the behavior of different walls of the nanotube under the influence of van der Waals forces and the elastic medium is one of the ...
A master's thesis in the field of electrical-power engineering. Time series load distribution. In this research, the application of time series models in the power system is discussed. Time series are used to model different power grid parameters and in various applications. These models are able to consider the time correlation of power grid variables. According to the modeling ...
Master's Thesis in Electrical Engineering ""M.SC."" Direction: Abstract The power of using electric vehicles such as hybrid electric vehicles in the transportation industry is increasing day by day. The battery of these cars can be charged through a home power socket or through public parking lots. Additional load caused by car battery charging can cause harmful consequences on ...
Master's Thesis of Precision Instrumentation and Automation in the Oil Industry. Abstract: Corrosion rate prediction and wear rate constant in gas brain tube using neural network is a phenomenon that is very complex due to the influence of various factors and cannot be modeled easily. In order to predict and model corrosion, attention is paid to its physical, chemical and ...
Master's Thesis in Electrical Engineering, Power Orientation Abstract In this thesis, while investigating the phenomenon of saturation in protection CTs, the problems related to the detection of this phenomenon and the compensation of CT secondary current have been discussed, and in order to solve the problems raised, methods have been introduced and the results have been ...
Master's thesis in the field of mechanical engineering - applied design approach. Abstract: Identifying the stiffness and damping coefficients of a beam support. By: Majid Abedi. Supports and connections play a fundamental and important role in engineering structures. It is necessary to identify different support parameters. Stiffness and damping parameters are the most ...
Master's Thesis in Mechanical Engineering, Energy Conversion, Abstract Due to the lack of fresh water resources, it is of great importance to discover new ways of water production. One of the new methods of producing fresh water in low capacity is the use of air humidity, which is known as condensation water production system. In this method, the flow of hot and humid air is ...
Doctoral Dissertation on Energy Conversion Abstract One of the most important issues in internal combustion engines is heat transfer in them; Because almost a third of the energy produced inside the combustion chamber is removed through engine cooling. The heat transfer of internal combustion engines is important from various aspects, including the protection of materials used ...
Master's thesis in the field of mechanics, specialization: mechanical engineering - energy conversion. Abstract: One of the most important components of fluid transmission systems are control valves, which can be seen in different routes of oil and gas transmission pipelines, etc. In control valves, the most important issue is the property of the flow in order to achieve the ...
Mechanical Engineering - Applied Design Orientation Abstract: Vibration is one of the important and basic concepts in engineering sciences. In simple words, any system that has mass and spring property has the ability to vibrate and can vibrate at a natural frequency. It can be said with certainty that 95% of vibrations in industries are harmful to systems. If the system is in ...
Thesis for receiving a master's degree in the field of mechanics, energy conversion, abstract: free or natural convection heat transfer is one of the most useful phenomena in industry and in the environment around humanity. Due to its wide application, this phenomenon has attracted the attention of many researchers and has prompted researchers to follow the flow of free movement ...
Presented to obtain a master's degree in the field of mechanical engineering-applied design orientation. Abstract In this research, we investigated the free vibration of a cracked beam and found its natural frequencies. In the first part, by using the open crack model, by modeling the cracked part as a beam-shaped element and satisfying the boundary conditions, we obtained the ...
Master's Thesis on Energy Conversion Abstract: Increasing heat transfer as well as increasing the efficiency of energy storage systems due to the limitation of natural resources and with the aim of reducing costs has always been one of the most basic concerns of engineers and researchers. This is especially important in fluids due to the small thermal conductivity coefficient. ...
Master's Thesis in Mechanical Engineering (Applied Design) Abstract of three-dimensional interlayer stress investigation in mechanical connections in layered composite materials The purpose of this thesis is to investigate three-dimensional interlayer stresses in mechanical connections in layered composite materials. For this purpose, finite element method and ABAQUS software ...
Master's thesis in information technology management, comprehensive quality trend, first chapter, introduction, the emergence of the global village, which has been in existence for several decades, has brought about tremendous changes in matters related to the management and organization of organizations, which unfortunately, not only did our country not contribute to its ...
Thesis for obtaining a master's degree in the field: computer, software, abstract. In a sensor network, which is a pervasive distributed system, communication synchronization is one of the discussed cases. One of the main tasks of synchronizing processes is mutual exclusivity. The new algorithms provided are more fair compared to the old algorithms. In this thesis, we present a ...
Master's Thesis of Faculty of Technology and Engineering, Computer Department Abstract: The issue of concurrency control in databases is a necessary and important issue. Asynchronous execution of transactions in a database management system may lead to inconsistencies. Inconsistency is caused by incorrect values ??for existing data, due to conflict and interference of ...
Dissertation for Master's degree (M.A.) field and direction: Business Management - International Business. Abstract of the current research is to model the international marketing strategies of high-tech products in companies active in the field of nanotechnology, and in this regard, to investigate the role of marketing trends and international marketing experiences on ...
Dissertation for Master's Degree in Mechatronics Engineering Persian Abstract The purpose of this project is to introduce a new approach for troubleshooting gas transmission pipelines using mechanical waves, which is much cheaper and easier than other methods. who are currently working. These lines are usually located in difficult environmental conditions and far away and in ...
Dissertation to receive a Master's Degree in Business Administration (M.A.) Orientation: Internal Abstract: The aim of the current research is to investigate the relationship between the components of information technology through transfer channels on the components of human resources management. To collect information in the field of research, library studies have been used to ...
Electrical-Electronics Engineering Master's Thesis Abstract In this thesis, we have used graphene nano-ribbons as an active layer of a solar cell for the first time. To simulate this cell, the non-equilibrium Green's function method was used in the mode space, and the effect of electron-photon interactions was calculated by means of Born's self-consistent approximation. To ...
Dissertation for Master's Degree in Civil Engineering, Hydraulic Structures, Abstract: It is obvious that water resources are essential for the life of living organisms and especially for human life. Drainers are a set of structures that are used to transfer water from the dam lake to the discharge point downstream. Therefore, due to the importance of this part of the dam, the ...
Dissertation for Master's Degree (M.Sc.) Field: Gas Processing and Transmission Engineering Abstract: Today, one of the problems in gas transmission lines is the gas hydrate phenomenon, which is a combination of light gases such as methane, ethane or carbon dioxide with water molecules under certain temperature and pressure conditions to form an ice-like substance that contains ...
A master's thesis in the field of chemical engineering, abstract of the laboratory study and modeling of calcium carbonate production from calcium chloride solution by absorbing carbon dioxide from industrial exhaust gases, by the efforts of Amin Alamdari, the effect of carbon dioxide concentration on the precipitation of calcium carbonate species and the kinetics of calcium ...
Master's thesis in the field of instrumentation and automation engineering in the oil industry, abstract modeling and non-invasive control of implantable blood pumps in the body for heart failure patients. Left ventricular assist devices (LVAD) are mechanical pumps that are surgically placed in the body of patients who are in the dangerous and final stages of congestive heart ...
Dissertation for Master's Degree in Chemical Engineering Abstract Critical characteristics for materials such as critical temperature, critical volume and critical pressure are important characteristics for predicting many thermodynamic properties of different materials. Knowing the critical properties plays an essential role in all hydrocarbon production and process operations. ...
Master's Thesis in Chemical Engineering (Process Simulation and Control) Abstract Modeling and Simulation of the Electrostatic Desalination Process of Crude Oil by Elham Ariafard The aim of this research is to model the desalination process of crude oil based on the population balance method. For this purpose, the one- and two-stage electrostatic desalination process, which ...
Master's thesis in the field of chemical nanoengineering, abstract modeling of chloride ion removal from gas condensate using nanofiltration of chloride ion in gas condensate can cause severe corrosion of equipment and pipes. Therefore, it is necessary to remove it from the condensate flow. The aim of this work is the mathematical modeling of the nanofiltration process for the ...
Master's thesis in the field of chemical engineering without major. Abstract: Modeling, simulation and optimization of Jam Petrochemical Check Bed Reactor for hydrogenation of 1 and 3-butadiene. Therefore, a suitable kinetic model has been selected as a basic structure for modeling the reactor, and after that the presented model has been developed in order to match the molar ...
Master's Thesis on Simulation and Process Design Abstract So far, many methods have been presented to remove phenol from wastewater, among them, the membrane bioreactor process has received attention in the last decade. The use of hollow fiber membrane contactor in this process is to avoid direct contact between two phases and increase the surface-to-volume ratio. In the current ...