Download the thesis about numerical balance✅ Word Document

Civil engineering, soil and foundation, abstract, considering that all engineering infrastructures and vital urban and non-urban places and arteries such as: foundations of buildings, bridges, silos, dams, retaining walls, marine structures, industrial facilities, etc. . . All spread on a platform called the earth. The importance of investigating the type of instability in ...

Thesis for receiving a master's degree in mining engineering - mineral processing trend. The abstract of the Golghar Sirjan complex magnetite processing plant includes three circuits of dry crushing and classification, dry magnetic separation and crushing and more magnetic separation. The tonnage of the incoming feed to the factory is 450 tons per hour and the tonnage of the ...

Dissertation for Master's Degree in Energy Conversion Mechanical Engineering Abstract: Fluid propulsion vector orientation has emerged as an important technology for high performance air vehicles. This technology can improve the maneuverability of the aircraft by changing the nozzle flow and its deviation from its axial direction. The purpose of this study is to investigate the ...

Dissertation for M.Sc Mechanical Engineering - Energy Conversion Trend Abstract In the last century, with the increasing demand for energy and the reduction of fossil fuel resources, the role of renewable energy in the progress and development of countries is not hidden from anyone. In the meantime, wind energy has a special share and has the highest growth rate among other ...

Master's Thesis in Mechanical Engineering, Energy Conversion, Abstract: Thermal energy storage and phase change materials for use in heating and cooling systems of buildings has become an important issue in the last 20 years. When there is a mismatch between energy production and its consumption time, the issue of energy storage becomes important. In the present work, the fluid ...

Thesis of master's degree, field of industrial management, research trend in operations, Shahrivar 2019. Abstract How and what to choose has long been the subject of discussion among philosophers and scientists, therefore, obtaining satisfactory results requires

Master's Thesis of Economic Sciences, Economic Sciences Orientation, 2013 Abstract: Considering the importance of the issue of economic growth, investigating the effect of the openness of the economy on economic growth, b

Dissertation for Master's Degree in Geography and Urban Planning Abstract Social justice means respecting the rights of others and respecting public interests. In fact, social justice is the result of social evolution. The realization of social justice depends on the proper distribution of urban public uses and services. The purpose of this research is to investigate the ...

Doctoral Dissertation of Soil and Foundation Mechanics Abstract In this research, the discrete element method was used to analyze the wave propagation and investigate the factors affecting the wave speed in granular soils. The method of separate elements is important due to the possibility of preparing completely similar samples and checking the effect of changes of a certain ...

Master thesis M.Sc. Discipline: Civil Engineering, Orientation: Hydraulic Structures. Abstract River containment is generally done by dams and similar structures. The flow passing through these structures has a significant potential for erosion and scouring of susceptible beds. Relaxation ponds are designed and built mainly for the purpose of depleting flow energy and ...

Master's degree thesis in the field of electrical engineering, power orientation. Abstract Today, the discussion of system control and monitoring is one of the most important discussions in the power network, and we need to know the exact state of the power network in order to design control devices. By knowing the state of the network at any moment, you can be aware of changes ...

Dissertation to receive a master's degree in computer engineering majoring in artificial intelligence. Abstract Dynamic environments are environments that have the ability to change over time. These changes can happen in different ways, including changes in parameters, objective functions or constraints of the problem. In this regard, a wide field of different sciences such as ...

Master's thesis in the field of road, building and environmental engineering - hydraulic structures. In this research, the effect of geobags on the scour control of bridge piers has been studied using Computational Fluid Dynamics (CFD) method. Geobags are geotextile bags that are filled with materials such as sand, concrete or materials from river dredging. Due to the ...

Dissertation for the degree of Master of Civil Engineering ""M.Sc."" In this research, an attempt is made to conduct case studies in a number of villages in the cities of Noorabad and Rostam in Fars province to determine the amount and factors affecting the error of the subscribers' meters in the rural water sector under different conditions, and finally, based on that, a ...

Master's Thesis in Chemical Engineering, Thermodynamics and Kinetics Abstract: A major part of the final properties of the product in emulsion polymerization is determined by the particle size distribution. In this project, an accurate model based on population balance equations (zero-one model) which includes the phenomena of nucleation and particle growth has been chosen to ...

Master's Thesis in Civil Engineering (Soil and Foundation) Abstract Dense sand piles have been used since 1950 in Japan and then in other countries of the world as one of the most effective and economical methods in strengthening soil in order to prevent liquefaction, increase bearing capacity and improve soils with different grain sizes. The process of implementing dense sand ...

Dissertation for obtaining the master's degree ""M.Sc."" (Chemical Engineering - Thermodynamics and Kinetics) Abstract: Keywords: Computational fluid dynamics, bubble, continuity and failure, floating bed reactors, multiphase systems, vertical vertical flows, PBM, DQMOM, recently liquid gas floating bed reactors have received attention due to their wide application in chemical, ...

Dissertation for Master's Degree in Analytical Chemistry Abstract In this study, a new scinometric film method was used to measure dichromate ion in aqueous media using chromophore 1 and 5-diphenylcarbazide (DPC). 5-1-Diphenylcarbazide was used as a complexing agent for the measurement of dichromate ion. As a result of entering dichromate into the structure of the polymer film, ...

Dissertation for Master's Degree in Applied Design Mechanics Abstract: Composites have received a lot of attention in recent decades due to their high strength and low weight. Such materials can fail due to static, impact, dynamic loading, etc., and the various failures that occur can cause a severe drop in strength in the structure. Engineers always think of using different ...

The thesis for obtaining a master's degree in the field of mechanics, investigating and analyzing the free and forced vibrations of a multi-walled carbon nanotube placed in an elastic medium in order to achieve a clear mathematical understanding of the behavior of different walls of the nanotube under the influence of van der Waals forces and the elastic medium is one of the ...

Master's degree thesis report in the field of electrical engineering, power trend, abstract. Today, the discussion of system control and monitoring is one of the most important discussions in the power network, and we need to know the exact state of the power network in order to design control devices. By knowing the state of the network at any moment, you can be aware of ...

Dissertation for M.Sc Master's degree, mechanical engineering-applied design Abstract With the emergence of composite materials, a huge progress was achieved in many engineering applications. Nevertheless, problems such as delamination, stress concentration, and discontinuous distribution of stress, the idea of ??creating a new type of composite materials in which properties ...

Mechanical Engineering - Applied Design Orientation Abstract: Vibration is one of the important and basic concepts in engineering sciences. In simple words, any system that has mass and spring property has the ability to vibrate and can vibrate at a natural frequency. It can be said with certainty that 95% of vibrations in industries are harmful to systems. If the system is in ...

Thesis - Master's Degree in Geophysics - Winter Seismology 2012 Abstract In this research, the effect of a branch fault in a subduction zone on tsunami waves using numerical modeling of tsunami waves.

In order to receive a master's degree in civil-soil and soil engineering in March 2013, abstract, different methods are used to stabilize pits, among them nailing method and ink method.

Dissertation of Master's Degree in Industrial Engineering – Summer Industries 2013 Abstract A supply chain is a collection of suppliers, manufacturers, and distributors.

Sources a) Persian sources: 1- Abrishmi, Hamid; Mehrara, Mohsen (1383), Deviation of equilibrium real exchange rate and woodworking policies in Iran's economy. Business research paper. Quarterly No. 33. 2- Abrishmi, Hamid; Mehrara, Mohsen (1384), methods of regulating and balancing the foreign exchange market and encouraging the purchase of goods and services from within. ...

Dissertation for Master's Degree in Industrial Management (Financial Orientation) Abstract Today, the importance of performance measurement for organizations has been identified and it plays an important role in many organizations. In the information age, organizations need to measure all financial and non-financial aspects of their organization. One of the performance ...

Dissertation for receiving the master's degree ""M.A."" Orientation: urban planning Abstract One of the criteria of sustainable urban development is paying attention to the balanced distribution of the population and the amount and manner of distribution of urban services, which can play an effective role in the displacement of population space and demographic changes in urban ...

Dissertation for Master's Degree in Industrial Management (Financial Orientation) Abstract: Considering the necessity and importance of studying the efficiency of banks, in order to identify inefficient units and plan to improve the performance of banks, in the present study, the efficiency of 20 branches of Tejarat Bank branches in Tehran city and in the period of 2009 and 2010 ...

(Master's degree in physical education (pathology and corrective movements) The effect of yoga exercises and central stability on balance and posture abnormalities of women with multiple sclerosis Abstract Introduction: Multiple sclerosis is the most common progressive neurological disease in young adults. This disease causes the destruction of myelin in the nerved axons and ...

Dissertation for Master's degree M.se field of remote sensing and geographic information system - water and soil resources Abstract: The phenomenon of dam failure has a catastrophic potential. Therefore, it is important to estimate the hydraulic parameters of flood waves in order to predict risks and manage resources and facilities and save human lives. Therefore, the issue of ...

Business management, financial orientation, thesis for receiving the master's degree ""M.A"" Abstract: Considering the very high impact of the insurance industry on the economic growth and development of countries, performance evaluation in insurance companies is very important, and since insurance companies are very broad in terms of structure and type of activity, the need to ...

Dissertation for receiving a master's degree in the field: executive management, direction: strategic. Abstract: The purpose of this research is to investigate the possibility of using a balanced scorecard to implement its strategies in Saipa Automobile Company. Balanced scorecard is one of the performance evaluation techniques of organizations that evaluates the organization ...

Master's thesis in the field of civil engineering, structural orientation. Abstract In this study, the evaluation and comparison of nonlinear and numerical analysis of deep reinforced concrete beams with openings without reinforcement with deep concrete beams with openings reinforced with FRP sheets and deep reinforced concrete beams without openings by Abaqus finite element ...

Dissertation for Master's Degree in Civil Engineering - Abstract Hydraulic structures in high dams of spillways, as one of the dependent hydraulic structures, have the important role of discharging the incoming floods into the dam reservoir with sufficient safety in free flow or under pressure downstream. In tunnel overflows where the flow is at a high speed and often under ...

M.SC Master's Thesis in Civil Engineering, specialization: hydraulic structures. Abstract Due to its special geographical location, Bandar Lange has been operating as a cargo and passenger transit station since the distant past. During the past years, this activity has raised expectations from it, so that its development plan has been implemented. Foresight in the development of ...

Master's thesis in the field of civil engineering, soil and foundation, in this research, the bearing capacity of the conical pile group and the cylindrical pile group with the same volume are calculated and compared. Due to the lack of numerical studies and modeling by software for conical piles compared to laboratory tests in this field, in this research, the modeling of the ...

Electrical-Electronics Engineering Master's Thesis Abstract In this thesis, we have used graphene nano-ribbons as an active layer of a solar cell for the first time. To simulate this cell, the non-equilibrium Green's function method was used in the mode space, and the effect of electron-photon interactions was calculated by means of Born's self-consistent approximation. To ...

Dissertation for Master's Degree in Civil Engineering, Hydraulic Structures, Abstract: It is obvious that water resources are essential for the life of living organisms and especially for human life. Drainers are a set of structures that are used to transfer water from the dam lake to the discharge point downstream. Therefore, due to the importance of this part of the dam, the ...

An academic thesis for receiving a master's degree in chemical engineering, environmental orientation. Among the models that are able to make successful predictions for the performance of reverse osmosis membranes, that is, the amount of separation and flow flux in a wide range of physical conditions (membrane and solution) and laboratory conditions (pressure and concentration), ...

Doctoral Dissertation in the field of Civil Engineering - Water and Environment Abstract Network methods are among the most widely used groundwater modeling tools that have been widely spread and accepted in the last two decades. On the other hand, the advancement of computing power of computers and the ease of access to them have led to the rapid development of numerical ...

Master's thesis in the field of road, building and environmental engineering - hydraulic structures Abstract In this research, nonlinear wave differential equations are solved by the local RBF-DQ numerical method. These differential equations are in the form of Laplace's equation (as a governing equation) and nonlinear boundary conditions on the free surface; The basis of the ...

Dissertation for M.A. Master's Degree in Physical Education Major: Sports Physiology Abstract: The purpose of this research was to investigate the effects of a central body stability training program on posture control, dynamic and static balance of volleyball players. The statistical population of this research was volunteer male volleyball players aged 18 to 24 from Zanjan ...

An academic thesis for a master's degree in the field of physical education and sports science, majoring in sports pathology and corrective movements: The purpose of this research was the effect of 8 weeks of stabilizing exercises on balance, pain and neck position sense in girls with non-specific neck pain of Shahid Bahonar University, Kerman. In this study, 30 female students ...

Master of Physical Education (Pathology and Corrective Movements) Abstract Introduction: Multiple sclerosis is the most common progressive neurological disease in young adults. This disease destroys myelin in nerve axons and causes functional damage. One of the important areas involved in MS is the cerebellum. A problem in this structure causes a disturbance in balance, etc., ...

Dissertation for Master's degree (M.A) Major: Sports Biomechanics Dissertation Abstract (including summary, objectives, implementation methods and obtained results): Research context: Naturally, with age, balance and walking control decline and lose their efficiency. Therefore, it is necessary to identify and introduce appropriate, safe and low-cost intervention solutions to ...

Abstract The differential equations that appear in physical problems are often non-linear, and their exact solution is necessary to obtain the solution. Since most of the nonlinear differential equations do not have an analytical solution, the numerical solution methods of these equations seem useful for things like plasma physics. For this purpose, in this thesis, the numerical ...

Master's Thesis on Irrigation and Drainage Abstract In arid and semi-arid regions, wastewater treatment and its reuse is considered as an important factor in water resource planning. Some researchers believe that the use of treated wastewater in agriculture is a very suitable solution because the elements removed from the soil by the plants are returned to the soil and the risk ...

Master's Thesis for Master's Degree Abstract Carbon nanotube can be considered the most amazing nanostructured material discovered so far. Unique features such as high strength, light weight, and high energy absorption capability have made this material recently attracted the attention of scientists in making bulletproof vests. In this thesis, a structural model in the Abaqus ...

Electrical-Electronics Engineering Master's Thesis Abstract In this thesis, we have used graphene nano-ribbons as an active layer of a solar cell for the first time. To simulate this cell, the non-equilibrium Green's function method was used in the mode space, and the effect of electron-photon interactions was calculated by means of Born's self-consistent approximation. To ...

Master's thesis in the field of mechanical engineering - energy conversion trend. Abstract Numerical simulation of a flow measurement microsensor in a real human aorta model. Arterial diseases, especially arteriosclerosis and vasodilation, are among the most important causes of sudden death in the world. There are different methods for diagnosing these diseases, and in this ...

Dissertation for Master's Degree Abstract Achieving higher rates of heat transfer using different techniques that can result in saving a significant amount of energy and also lead to the production of more compact and cheaper devices with higher thermal efficiency has attracted the attention of researchers. Vortex generation is one of the best methods used to increase heat ...

Abstract: Research in the field of heat transfer of suspensions with nanometer-sized solid particles in the base fluid has started in the last decade. Recent research in the field of nanofluids has shown that the addition of nanoparticles causes a significant increase in the heat transfer of the suspension. Another common way to improve the thermal performance of devices is to ...

Master's Thesis Applied Design Abstract In this thesis, in the field of vacuum technology, the importance, application and role of this technology in the industry and the advancement of scientific research, technical terms related to this technology, types of vacuum pumps, applications, advantages and disadvantages of each of the vacuum pumps, the importance of studying the ...

1 Introduction Considering the acceleration of the process of science and technology in today's industrial world, every field of science is divided into more specialized trends. This division arises by itself and according to the need and necessity and the increasing complexities of the industry. The world of economics and the relationships between economic and financial ...

Dissertation in order to receive a Master's Degree in Rock Mechanics Abstract In open pit mining where many steps are created, it is necessary to conduct stability studies of the wall slope. By increasing the slope angle of the mine, the ratio of tailings removal is reduced, which will save the overall costs of the mine, but on the other hand, it will reduce the safety, in case ...

Dissertation for M.Sc. Mechanical engineering trend - applied design In this research, a wind turbine with a vertical axis of the Savonius model is modeled. The wind turbine has been modeled in the fluid control volume, which is the same as the wind tunnel in real conditions, and has been investigated under wind blowing with different speeds. Also, in terms of overlap ratio, it ...

Dissertation for the Master's degree ""M.Sc"" in Mechanical Engineering - Energy Conversion. Abstract In this thesis, experimental analysis along with numerical simulation has been carried out to investigate the performance of Savunius vertical axis wind turbine. In order to carry out the tests, the turbine was tested in the subsonic wind tunnel. In order to check the accuracy ...

Abstract Balanced Scorecard is four sticks to describe the activities of an organization from four different aspects, which is done through a number of indicators, the main purpose of this research is to investigate the status of indicators and aspects of Balanced Scorecard in Pasargad Oil Company, the present research consists of two questions. 1- What is the status of the ...

Master's Thesis on Energy Conversion Abstract: Increasing heat transfer as well as increasing energy efficiency due to the limitation of natural resources and reducing costs has always been one of the most basic concerns of engineers and researchers. This is especially important in fluids due to the small thermal conductivity coefficient. One of the most important ways to ...

Master's Thesis, Mechanical Engineering, Energy Conversion, Abstract In this thesis, using the CFD computational fluid dynamics technique, the effect of key parameters such as the effect of secondary inlet pressure on the ejector device, suction ratio, return currents caused by secondary inlet pressure and the effect of all these parameters on the hydrodynamic characteristics of ...

Master's Thesis, Energy Conversion Engineering, Abstract: In many processes in the industry, the combination of liquid droplets with gas flow will lead to problems such as corrosion of downstream equipment and loss of expensive liquids. To solve these problems, the phases are separated from each other with the help of a separator. Cyclone separators, as a type of high efficiency ...

Master's Thesis of Mechanics, Energy Conversion, Abstract In this study, by using the computational fluid dynamics technique, an attempt has been made to obtain the optimal dimensions for the injection nozzles of the vortex tube device. For this purpose, numerical simulation has been performed for different values ??of length, width, and height of injection nozzles, and other ...

Dissertation for M.Sc Master's Degree, Mechanical Engineering-Manufacturing and Production Abstract Nowadays, due to the need for parts with high strength and low weight, the method of manufacturing parts has become important. Hot gas forming [1] is a new process that, due to the elimination of side operations such as welding, the total weight of the parts is reduced, the ...

Master's Thesis in Mechanical Engineering (Energy Conversion) Abstract Numerical investigation of the effect of microstructures on heat transfer and fluid mixing in microchannels, the need for high heat transfer from electronic packages and optical systems, etc., has created a challenge in the field of thermal management. In this context, microchannel heat wells play a great ...

Dissertation for receiving master's degree in mechanical engineering, the trend of manufacturing and production of complex industrial products from metal pipes with the aim of increasing the strength-to-weight ratio of structures and especially reducing the fuel consumption of vehicles has attracted the attention of industrialists in recent years. In this regard, one of the new ...

Master's Thesis in Mechanical Engineering (Energy Conversion) Abstract Numerical investigation of three-dimensional heat transfer in traveling wave amplifier collector with input power of 900 and 3000 watts, traveling wave lamp[1] is one of the types of microwave amplifiers. This lamp consists of five main parts, which are electron gun, slow wave structure, wave input and output ...

Master's Thesis in Mechanical Engineering - Energy Conversion Abstract The vortex tube is a simple mechanical device that has no moving parts and is one of the equipment used in the refrigeration system, in which a high-pressure fluid enters the vortex tube through the inlet nozzles and splits into two streams with a lower and higher temperature than the inlet temperature, thus ...

Master's Thesis in the field of Mechanical Engineering - Energy Conversion Abstract Numerical investigation of fluid flow and heat transfer on mesh plates with cross holes under discontinuous suction Introduction 1-1- Fluid flow on mesh plates The urgent need of modern humans to use different fuels and the problem of environmental pollution caused by improper and indiscriminate ...

Dissertation for Obtaining an M.A. degree in the field of educational management in the academic year 1393-1394. Abstract: Recently, a new concept has been proposed in the theoretical foundations of management, which is called organizational maturity.

Chapter One Research Overview 1 Introduction All over the world, the banking industry is considered one of the most important pillars of the economy of any country, and due to the provision of various financial and credit services, it plays a decisive role in the development of

Field: executive management, abstract, introduction and purpose of research: Outsourcing means finding new service providers and new methods to provide materials, goods, components and services to them with confidence.

Thesis for receiving a master's degree in the field of civil engineering of hydraulic structures, October 2013 This study is to quantitatively evaluate the effects of watershed operations and with the aim of evaluating the efficiency of projects

Expert thesis‌ Master of Civil Engineering, Structural Orientation, September 2013 Abstract Today, with the progress of science in the construction industry, many methods have been presented to improve reinforced concrete structures

Dissertation for obtaining a master's degree in civil engineering, structural orientation, March 2013, abstract of the scope of using FRP materials for shear strengthening of reinforced concrete beams in

Thesis of master's degree in civil engineering, soil and foundation mechanics orientation, September 2019, abstract: analysis of dynamic interaction between soil and structure (due to the mutual effect of the structure and its retaining soil on each other), D

Master's degree thesis of Master's degree: MBA Winter 90 Abstract: Agility means the ability of any organization to anticipate changes in the work environment. Such an organization with

Dissertation for Master's Degree in Civil Engineering/ Cold Water Engineering 1392 1-1- Introduction In this chapter, an overview of the concept of climate change and its causes and the effect of this phenomenon on natural resources and

end‌name? Rasht Master's Degree: Civil Engineering (M.S.C.) Focus: Hydraulic Structures Academic Year 2011-2012 Summary of the Minab River, the most important river of Khan? The fresh water is in Hormozgan province. this river