Download more than 100 examples of thesis, proposal and project topics about node modeling in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Thesis for obtaining a master's degree in the field: computer, software, abstract. In a sensor network, which is a pervasive distributed system, communication synchronization is one of the discussed cases. One of the main tasks of synchronizing processes is mutual exclusivity. The new algorithms provided are more fair compared to the old algorithms. In this thesis, we present a ...
Dissertation for M.Sc. Abstract A wireless sensor network is a network consisting of many small nodes. The node receives information about the environment through sensors. The energy consumption of the nodes is usually provided by batteries, which in most cases cannot be replaced. Therefore, the consumption power of nodes is an important issue in these networks. And it is very ...
Master's thesis in the field of road, building and environmental engineering - hydraulic structures Abstract In this research, nonlinear wave differential equations are solved by the local RBF-DQ numerical method. These differential equations are in the form of Laplace's equation (as a governing equation) and nonlinear boundary conditions on the free surface; The basis of the ...
Dissertation to receive a master's degree in the field of chemical engineering, thermokinetic orientation. Abstract With the increase in the use of fuel cells in the industry and as an on-site application, there is a need to develop production units on the site of hydrogen. In this research, a monolithic catalytic reformer in which autothermal reforming of methane takes place is ...
Dissertation for M.Sc. Chemical Engineering-Environmental Engineering Abstract: Microbiological fuel cells (MFC) are considered as one of the important potentials in providing clean and renewable energy in the future. In addition to providing electrical energy, which is the most widely used and flexible among other types of energy, MFCs not only do not cause the slightest ...
Master's Thesis of Chemical Engineering-Biotechnology Abstract The deteriorating energy sources of fossil fuels will make the developing human society suffer from fuel shortage in the not too distant future. As a result, the concerns of the continuous and increasing release of carbon dioxide into the atmosphere, as well as the extent of pollution caused by fossil fuels that have ...
Dissertation for M.S.c Master's Degree, Orientation: Systems Abstract: Vehicle sensor networks include mobile nodes that measure the physical and chemical parameters of the environment during movement. Sensor nodes usually have limited energy, and this lifetime limitation has caused many researches by researchers on wireless sensor networks, but the issue of lifetime in ...
Abstract A wireless sensor network is a network consisting of many small nodes. The node receives information about the environment through sensors. The energy consumption of the nodes is usually provided by batteries, which in most cases cannot be replaced. Therefore, the consumption power of nodes is an important issue in these networks. And it is very necessary to use ...
Dissertation for M.Sc. Degree: Power Electronics Abstract: Distribution networks have various loads that consume different amounts of reactive power. Considering the effect of the type of load on the location and size of capacitor banks in distribution systems, in this thesis, a novel method for modeling different network loads in order to improve the voltage profile and reduce ...
Thesis of master's degree in civil engineering, soil and foundation mechanics orientation, September 2019, abstract: analysis of dynamic interaction between soil and structure (due to the mutual effect of the structure and its retaining soil on each other), D
Master's thesis in telecommunications-systems, the abstract of the current research is about the issue of scalability in wireless sensor networks with imaging capability, which has analyzed, mathematically modeled and simulated the scalability by considering a relatively practical scenario of the sensor network, and based on the performance criteria of outage capacity and ...
Master's thesis in the field of computer engineering (software), the abstract of Turin computing networks (GRID) has provided a context that can be used from heterogeneous sources in Different geographic locations are used to solve complex scientific, engineering and business problems. Timing operation plays a key role in grid performance. In this thesis, using the advantages of ...
Master's Thesis in the field of Computer Engineering-Artificial Intelligence Abstract Inferring gene regulatory networks from Microarray time series data by dynamic Bayesian networks Genetic regulatory networks are a set of gene-gene relationships that create a cause and effect relationship in gene activities. Our knowledge about these networks plays a very effective role in ...
Dissertation for Master's Degree in Computer Engineering - Artificial Intelligence Abstract Considering the rapid growth of complexity and size of simulation systems, designing efficient structures for evaluation and validation is an important issue. Today, Petri net is used for validation and verification. Petri nets are used to model systems of discrete events that may occur ...
Master's Thesis (M.sc) Civil Engineering, Soil and Foundation Mechanics Abstract In this research, the stability of soil reinforced with geogrid located on an underground cavity was analyzed using plaxis software, and the effect of several factors such as the number of geogrid layers, the length of the geogrid layer, the stiffness of the geogrid layer, the optimal location of ...
Master's thesis in the field of civil engineering (environmental engineering) is an abstract of the surface absorption method, one of the effective methods for removing metals, including nickel metal. In this research, modified rice paddy has been used as absorbent material. Since this adsorbent is a natural material with a high contact surface, in addition to its high ability ...
Non-continuous master's degree in computer engineering Abstract Today, the popularity of social networking sites among people is undeniable, sites that provide users with many possibilities for communication between people. One of the basic problems in analyzing these types of networks is predicting new connections between people in the network. Fuzzy method, as one of the ...
Master's Dissertation of Discontinuous Structure Abstract: In recent years, the use of composite material in the construction and strengthening of structures has expanded greatly. The structure of this material is such that there is a possibility of crack formation between the layers. Due to the increase in load, these cracks grow and cause a sharp drop in the strength and ...
Dissertation for Master's Degree in Civil Engineering, Structures, Abstract: This thesis is the results of a numerical and parametric study on the effect of reinforcing reinforced concrete shear wall with FRP composite and applying the results of the finite element method. The finite element program is compared and calibrated against experimental data. Then, the numerical ...
In order to receive a master's degree in textile technology, it is essential to know the physical and mechanical properties of carpets to produce a quality product and maintain the proper appearance. In this research, an attempt has been made to provide a model to determine the relationship between the different parameters of these characteristics, therefore, to measure these ...
Dissertation of the master's degree in the field: civil engineering - structure, page 1-1-problem definition: In the science of structural engineering, there has always been an attempt to predict a set of events that will have a significant effect on the efficiency and endurance of the structure during its useful life. These factors should be considered by the design engineer ...
Doctoral Dissertation in the field of Civil Engineering - Water and Environment Abstract Network methods are among the most widely used groundwater modeling tools that have been widely spread and accepted in the last two decades. On the other hand, the advancement of computing power of computers and the ease of access to them have led to the rapid development of numerical ...
Master's degree thesis in the field of chemical engineering, thermokinetic and catalyst orientation. Abstract The purpose of this research is to estimate the electrical conductivity of natural waters based on modern mathematical methods. To achieve this, the waters of the Karaj and Jajrud rivers are considered as special cases. For this purpose, 20 sampling stations were ...
The abstract of the current research is about the issue of scalability in wireless sensor networks with imaging capability, which has analyzed, mathematically modeled and simulated the scalability by considering a relatively practical scenario of the sensor network, and based on the performance criteria of outage capacity and ergodic capacity of the network. Scalability is ...
Dissertation for Master's Degree (M.Sc.) Investigating the application of artificial neural network method in estimating the annual runoff of watersheds (Case study: Total Watershed, Fars Province) by: Jalal Zarei Abstract: The importance and place of water in human life, especially in the modern and overpopulated world, is not hidden from anyone, and industrial and urban life ...
Thesis for receiving a master's degree in the field of mechanics, energy conversion, abstract: free or natural convection heat transfer is one of the most useful phenomena in industry and in the environment around humanity. Due to its wide application, this phenomenon has attracted the attention of many researchers and has prompted researchers to follow the flow of free movement ...
Master's Thesis in Mechanical Engineering (Applied Design) Abstract of three-dimensional interlayer stress investigation in mechanical connections in layered composite materials The purpose of this thesis is to investigate three-dimensional interlayer stresses in mechanical connections in layered composite materials. For this purpose, finite element method and ABAQUS software ...
Thesis - Master's Degree in Geophysics - Winter Seismology 2012 Abstract In this research, the effect of a branch fault in a subduction zone on tsunami waves using numerical modeling of tsunami waves.
Master's Thesis in Family Counseling Abstract Introduction and Purpose: The aim of the present study was to investigate the effectiveness of Hastinger's cognitive therapy on reducing the symptoms of depression in patients with human immunodeficiency virus. Method: The study was a single-case study using a purpose-based sampling method. Three women infected with human ...
Dissertation for Master's Degree in Polymer Industry Engineering April 2013 Abstract Nowadays, the topic of energy and energy saving in all fields, even in homes, is one of the most important.
To receive a master's degree in polymer engineering - polymer industries, May 2013 abstract With the progress of various sciences and knowledge, the boundaries of knowledge have converged and in some fields we are witnessing
Master's thesis in information technology management, comprehensive quality trend, first chapter, introduction, the emergence of the global village, which has been in existence for several decades, has brought about tremendous changes in matters related to the management and organization of organizations, which unfortunately, not only did our country not contribute to its ...
Dissertation for Master's degree (M.Sc) Abstract: A sensor network consists of a large number of sensor nodes that are widely distributed in an environment and collect information from the environment. Since the nodes are powered by batteries, an important issue that is considered in sensor networks is the issue of energy consumption. One of the methods that are very common in ...
Master's Thesis in Electrical Engineering (Communication System) Abstract: Optimizing Node Placement in Different Environments for Broadband Sensor Networks Locator Systems are systems that can detect the location of an object in a space. Such systems usually detect the distance between two objects by using radio communication and determine the location of the object in the area ...
Master's Thesis of Faculty of Technology and Engineering, Computer Department Abstract: The issue of concurrency control in databases is a necessary and important issue. Asynchronous execution of transactions in a database management system may lead to inconsistencies. Inconsistency is caused by incorrect values ??for existing data, due to conflict and interference of ...
Dissertation for Master's degree (M.A.) field and direction: Business Management - International Business. Abstract of the current research is to model the international marketing strategies of high-tech products in companies active in the field of nanotechnology, and in this regard, to investigate the role of marketing trends and international marketing experiences on ...
Master's thesis in the field of civil engineering, structural orientation. Abstract In this study, the evaluation and comparison of nonlinear and numerical analysis of deep reinforced concrete beams with openings without reinforcement with deep concrete beams with openings reinforced with FRP sheets and deep reinforced concrete beams without openings by Abaqus finite element ...
Dissertation for Master's Degree in Mechatronics Engineering Persian Abstract The purpose of this project is to introduce a new approach for troubleshooting gas transmission pipelines using mechanical waves, which is much cheaper and easier than other methods. who are currently working. These lines are usually located in difficult environmental conditions and far away and in ...
Dissertation to receive a Master's Degree in Business Administration (M.A.) Orientation: Internal Abstract: The aim of the current research is to investigate the relationship between the components of information technology through transfer channels on the components of human resources management. To collect information in the field of research, library studies have been used to ...
An academic thesis for receiving a master's degree in chemical engineering, environmental orientation. Among the models that are able to make successful predictions for the performance of reverse osmosis membranes, that is, the amount of separation and flow flux in a wide range of physical conditions (membrane and solution) and laboratory conditions (pressure and concentration), ...
Master's Thesis in Chemical Engineering, Thermodynamics and Kinetics Abstract: A major part of the final properties of the product in emulsion polymerization is determined by the particle size distribution. In this project, an accurate model based on population balance equations (zero-one model) which includes the phenomena of nucleation and particle growth has been chosen to ...
Dissertation for Master's Degree (M.Sc.) Field: Gas Processing and Transmission Engineering Abstract: Today, one of the problems in gas transmission lines is the gas hydrate phenomenon, which is a combination of light gases such as methane, ethane or carbon dioxide with water molecules under certain temperature and pressure conditions to form an ice-like substance that contains ...
A master's thesis in the field of chemical engineering, abstract of the laboratory study and modeling of calcium carbonate production from calcium chloride solution by absorbing carbon dioxide from industrial exhaust gases, by the efforts of Amin Alamdari, the effect of carbon dioxide concentration on the precipitation of calcium carbonate species and the kinetics of calcium ...
Dissertation for obtaining the master's degree ""M.Sc."" (Chemical Engineering - Thermodynamics and Kinetics) Abstract: Keywords: Computational fluid dynamics, bubble, continuity and failure, floating bed reactors, multiphase systems, vertical vertical flows, PBM, DQMOM, recently liquid gas floating bed reactors have received attention due to their wide application in chemical, ...
Master's thesis in the field of instrumentation and automation engineering in the oil industry, abstract modeling and non-invasive control of implantable blood pumps in the body for heart failure patients. Left ventricular assist devices (LVAD) are mechanical pumps that are surgically placed in the body of patients who are in the dangerous and final stages of congestive heart ...
Dissertation for Master's Degree in Chemical Engineering Abstract Critical characteristics for materials such as critical temperature, critical volume and critical pressure are important characteristics for predicting many thermodynamic properties of different materials. Knowing the critical properties plays an essential role in all hydrocarbon production and process operations. ...
Master's Thesis in Chemical Engineering (Process Simulation and Control) Abstract Modeling and Simulation of the Electrostatic Desalination Process of Crude Oil by Elham Ariafard The aim of this research is to model the desalination process of crude oil based on the population balance method. For this purpose, the one- and two-stage electrostatic desalination process, which ...
Master's thesis in the field of chemical nanoengineering, abstract modeling of chloride ion removal from gas condensate using nanofiltration of chloride ion in gas condensate can cause severe corrosion of equipment and pipes. Therefore, it is necessary to remove it from the condensate flow. The aim of this work is the mathematical modeling of the nanofiltration process for the ...
Master's thesis in the field of chemical engineering without major. Abstract: Modeling, simulation and optimization of Jam Petrochemical Check Bed Reactor for hydrogenation of 1 and 3-butadiene. Therefore, a suitable kinetic model has been selected as a basic structure for modeling the reactor, and after that the presented model has been developed in order to match the molar ...
Master's Thesis on Simulation and Process Design Abstract So far, many methods have been presented to remove phenol from wastewater, among them, the membrane bioreactor process has received attention in the last decade. The use of hollow fiber membrane contactor in this process is to avoid direct contact between two phases and increase the surface-to-volume ratio. In the current ...
Master's Thesis in Chemical Engineering Abstract: The purpose of this thesis is mathematical modeling of rotary dryer for drying dicalcium phosphate. In this project, with different temperature conditions and different number of cycles of the dryer, the moisture level of the product exiting the dryer has been checked. As a result, 100 data have been obtained from the output of ...
Master's thesis in the field of electrical-power engineering Abstract: The ground system refers to a set of conductors with different structures that are placed in the ground to protect equipment, human safety against electrocution, prevent unwanted overvoltages and damage to HV equipment. The importance of earth resistance is because it plays an important role in protecting the ...
Dissertation to receive a master's degree ""M.Sc"" in the field of electrical engineering, power systems trend Abstract Today, significant advances in semiconductor technology and the emergence of high-power switches that have the ability to be turned off by a control signal on the one hand and the better efficiency of multi-level converters compared to two-level converters on ...
Dissertation for Master's degree (M.Sc) Major: Electronics Abstract: A sensor network consists of a large number of sensor nodes that are widely distributed in an environment and collect information from the environment. Since the nodes are powered by batteries, an important issue that is considered in sensor networks is energy consumption. One of the methods that are very ...
Master's Thesis in Electrical Engineering (Communication System) Abstract: Optimizing the placement of nodes in different environments for ultra-broadband sensor networks. Locator systems are systems that can detect the location of an object in a space. Such systems usually detect the distance between two objects by using radio communication and determine the location of the ...
A master's thesis in the field of mechanics, applied design, abstract. These two characteristics are caused by phase transformations under different thermodynamic loadings. Depending on these two mentioned features, memory alloys can be used as actuators in different forms. These structures can be used in different fields such as medicine, aerospace, knowledge
Dissertation for Master's Degree in Water Resources Engineering Abstract Nowadays, due to the issue of water crisis and the need for accurate planning, the use of statistical models and methods is increasing. The research conducted in this field has also shown the usefulness of using statistical methods. The use of different forecasting methods has many advantages, including ...
Doctoral Dissertation in Civil Engineering - Summer 2013 Earthquake Abstract One of the appropriate tools to know the condition of the network As one of the vital artery systems, water distribution is an indicator of reliability. one hand
Dissertation for receiving a master's degree in the field of structural oriented civil engineering, 2013, although the construction and design methods of structures have expanded over the years, but still the effect of earthquakes is one of the most important.
Dissertation for obtaining a master's degree in civil engineering, structural orientation, March 2013, abstract of the scope of using FRP materials for shear strengthening of reinforced concrete beams in
Department of Industrial Management Winter 2019 Abstract: The current research is about the mutual effect of supply chain management and customer relationship management in Esfrain Steel Company. In order to answer the research questions
Dissertation for the degree of ""M.A."" Field: Educational Management Abstract of the present research with the aim of knowing and analyzing Investigating the relationship between trust in management and job satisfaction of teachers in water schools
endname? Rasht Master's Degree: Civil Engineering (M.S.C.) Focus: Hydraulic Structures Academic Year 2011-2012 Summary of the Minab River, the most important river of Khan? The fresh water is in Hormozgan province. this river
Abstract The general purpose of the research is to analyze the content of social studies books for the fourth and fifth grades of elementary school based on metacognitive skills. Descriptive research method and basically a ""research"" Content analysis " is cup
Thesis of the master's degree in the educational field: MBA 2013 Farsi Abstract Many business managers consider marketing to mean sales or advertising, while the concept of market
Doctoral Dissertation on Earthquake Geophysics Science, September 2012 Abstract In this treatise, several combined simulation methods are used in order to produce artificial maps of the earth's powerful movement. Based on this, there are two methods
Dissertation of master's degree in structural engineering, February 2011 Abstract: In the optimal civil engineering structure construction for static loadings have been significantly developed. But, in
In order to receive a master's degree in civil-soil and soil engineering in March 2013, abstract, different methods are used to stabilize pits, among them nailing method and ink method.
Thesis for receiving a master's degree in the field of civil engineering with structural orientation in February. 2013 Abstract: In recent years, significant progress has been made in the field of improvement and resistance
Doctoral dissertation in civil engineering – Earthquake Engineering 2013 Abstract The inappropriate performance of columns in concrete buildings designed and built in the past years causes concern and attention to the amount of A
Dissertation for master's degree in civil-structural field winter 2012 Abstract In recent years, the number of buildings that have suffered damage due to the loss of their gravity-bearing members has increased. Therefore, it has become important to design structures so that they are resistant to progressive damage in addition to the effects of earthquakes. One of the factors ...
Dissertation of master's course in the field of educational sciences, history and philosophy of education, winter 93 Abstract: This research aims to analyze the content of moral concepts and themes in the Holy Quran and with the aim of
Dissertation for obtaining a master's degree (A..M) orientation: Human Resources Winter 2019 Abstract With the advancement of technology and the complexity of organizational activities, it can be boldly claimed that the working life of
Dissertation for receiving master's degree (M.A) in regional planning orientation, winter 2013 Abstract: Today, many researchers pay attention to the role of tourism in economic and social development
Master's Thesis in Civil Engineering - Structural Orientation, February 2013 Abstract: The performance of a building during an earthquake depends on many factors, as a result, predicting the seismic performance of structures should be considered either explicitly or implicitly as part of the design or evaluation. Predicting the seismic response of the structure is very ...
Master's Thesis Field: Executive Management Focus: Strategic Management Academic Year: 1389-1391 Abstract of Research Measuring market risk is a problem that has been on researchers' minds for a long time
Dissertation for Master's Degree in Public Management, Organizational Transformation Orientation Winter 1391 Abstract The current research aims to investigate the relationship between transformational leadership and Empowerment of psychology
The first chapter General 1 - 1 program introduction Economic planning requires knowledge of the general performance of the country's economy. But in most countries, some of the economic activities are exposed to politics
The thesis of the master's degree course in the field of economic sciences, February 2013, is an abstract of the prediction of effective tools and solutions for the purpose of planning and compiling financial methods. Prediction accuracy is important