Download the thesis about nitrate salts✅ Word Document

Download more than 58 examples of thesis, proposal and project topics about nitrate salts in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.

Number of pages: 64 Category: Food and Packaging Industries

Dissertation for M. Sc. Abstract Nitrates, nitrites and ascorbic acid are present in a wide range of foods. Vegetables are an important source of nitrate, nitrite and ascorbic acid absorption in the diet. The purpose of this research is to investigate the effect of freezing and cooking process on the amount of nitrate, nitrite and ascorbic acid of commonly consumed vegetables. ...

Number of pages: 63 Category: Food and Packaging Industries

Abstract In the present study, the effect of conditions (boiling) and storage time (9 days) on the content of ascorbic acid, nitrate and nitrite of 5 vegetable samples (broccoli, red cabbage, white cabbage, chives and mushrooms) were evaluated and the results were analyzed by spss 16.0 software. The results obtained from the statistical analysis showed that among the samples, ...

Number of pages: 72 Category: Food and Packaging Industries

Dissertation for M.Sc. Degree: Food Industry 1.1 Introduction Along with the increase in population, the demand for food has also increased and this has caused the excessive use of chemical and organic fertilizers to increase crop production (Ardkani et al., 2005). Vegetables are rich in vitamins, minerals and antioxidant compounds, whose anti-cancer properties have been proven ...

Number of pages: 71 Category: Food and Packaging Industries

Dissertation for M.Sc degree, major: food science and technology. Abstract To conduct this research, samples of spinach (Damghan), tomato (Dezful), lettuce (Varamin), celery (Tehran), zucchini (Gorgan), eggplant (Qasrshirin) were purchased from Damghan market in June 2013. Nitrate, nitrite and ascorbic acid concentrations were measured in the edible parts of each sample. The ...

Number of pages: 61 Category: Food and Packaging Industries

Food Science Engineering Thesis for receiving the master's degree ""M. Sc"" Abstract Nitrate, nitrite and ascorbic acid are present in a wide range of foods. Vegetables are an important source of nitrate, nitrite and ascorbic acid absorption in the diet. The purpose of this research is to investigate the effect of frying and boiling process on the amount of nitrate, nitrite and ...

Number of pages: 122 Category: Chemical - Petrochemical Engineering

Master's thesis in the field of chemical-biotechnology engineering Abstract Protozoan protein refers to the protein obtained from the cultivation of bacteria, yeasts, filamentous fungi or algae, which can be used as human food or animal feed. In fact, protozoan protein is the dried cells of microorganisms that are obtained by their fermentation on different substrates. ...

Number of pages: 118 Category: Chemical - Petrochemical Engineering

Doctoral thesis in the field of chemical engineering. Abstract The study of the effective parameters in the synthesis of silver nanoparticles by the inverse microemulsion method of metallic silver nanoparticles is of interest due to their use as catalysts, antimicrobial agents and biosensors. The practical use of silver nanoparticles is highly dependent on the size distribution ...

Number of pages: 89 Category: Food and Packaging Industries

Dissertation for receiving a master's degree in the field of agricultural engineering, science and food industry, food microbiology. Abstract The antimicrobial effect of elderberry kernel extract as a substitute for chemical preservatives in the market was investigated on the chemical, microbial and sensory characteristics of mayonnaise. The measurements showed that the ...

Number of pages: 102 Category: Chemical - Petrochemical Engineering

Master's Thesis of Polymer Industry Engineering Abstract With the progress of human civilization, technology development and the ever-increasing population, the world is currently facing a problem called pollution that threatens the lives of the inhabitants of the earth. Pollution caused by the accumulation of persistent toxic compounds in soil and water, such as chemicals, ...

Number of pages: 128 Category: Industrial Engineering

Master's Thesis in Polymer Science and Technology Abstract: Today, cancer is one of the most important concerns of the medical world, for which no definitive cure has been found so far. Radiation therapy is one of the methods used to control and reduce the complications of cancer. Brachytherapy is one of these radiation therapy methods in which the radiation source is placed ...

Number of pages: 70 Category: Agricultural Engineering

Department: Plant Products Master's Thesis in Plant Products-Horticulture Abstract Rose (Rosa hybrida) is considered one of the most popular flowers in the world and its cut flower branch is the most used among other flowers. Due to the physiological reasons of being a rose cut flower, during its shelf life, it is highly susceptible to withering and reducing its freshness and ...

Number of pages: 56 Category: Agricultural Engineering

Dissertation for obtaining a master's degree in the field: horticulture, ornamental plants. Abstract This study was conducted in order to investigate the effect of nickel on the life after harvesting of gerbera flower in the form of a completely randomized design with three replications. Healthy gerbera flowers (Gerbera jamesonii cv. 'Intense') were purchased from a commercial ...

Number of pages: 95 Category: Geography - Urban Planning

Dissertation for receiving a master's degree in the field of natural geography, climatology, first chapter, general research 1- 1- Introduction The tourism industry is one of the most important industries for economic growth in developed and developing countries (Font and Ahjem [1], 1999: 63). Currently, many countries receive their economic and social benefits from tourism and ...

Number of pages: 92 Category: Chemical - Petrochemical Engineering

Master's thesis in the field of chemical engineering Kidney stones are one of the most common diseases in the world, most of its crystals consist of calcium oxalate crystals. Therefore, it has been a long time that the investigation of effective substances in controlling this disease through the control of calcium oxalate crystals has been considered. The purpose of this ...

Number of pages: 122 Category: Geography - Urban Planning

Pasture and Watershed Department Thesis for Master's Degree in Desertification Abstract Menarid International Project is the first multi-land project that seeks to establish partnership and organizational cohesion at three levels of people, governmental organizations and non-governmental organizations for the purpose of sustainable land management with an emphasis on sustainable ...

Number of pages: 127 Category: Biology - Environment

Master's thesis in the field of civil engineering (environmental engineering) is an abstract of the surface absorption method, one of the effective methods for removing metals, including nickel metal. In this research, modified rice paddy has been used as absorbent material. Since this adsorbent is a natural material with a high contact surface, in addition to its high ability ...

Number of pages: 113 Category: Biology - Environment

Dissertation for receiving a Master's degree (M.Sc.) specialization: Environment Abstract Gaseous liquids obtained from the refining of sour gases are also sour and contain a large percentage of hydrogen sulfide and mercaptans. Therefore, after distilling and preparing the products, it needs refining processes to remove or reduce the amount of sulfur and mercaptans present. ...

Number of pages: 173 Category: Biology - Environment

Doctoral Dissertation in the field of Civil Engineering - Water and Environment Abstract Network methods are among the most widely used groundwater modeling tools that have been widely spread and accepted in the last two decades. On the other hand, the advancement of computing power of computers and the ease of access to them have led to the rapid development of numerical ...

Number of pages: 86 Category: Chemical - Petrochemical Engineering

Master's Thesis in the field of Chemical Engineering Abstract Investigation of parameters affecting the production of alumina gel by sol-gel method Sol-gel method is one of the common methods that is widely used to produce different nanoparticles. In this method, a solution of initiators is mixed with water in the presence of a catalyst, and hydrolysis and polymerization ...

Number of pages: 115 Category: Chemical - Petrochemical Engineering

Doctoral thesis in the field of chemical engineering abstract theoretical and experimental investigation of the continuous process of desalination of heavy crude oil using microwaves and ultrasonic waves Desalination of crude oil is the first step in oil refining, by which the undesirable compounds with the oil are separated before they reach the main unit. In order to reduce ...

Number of pages: 75 Category: Chemical - Petrochemical Engineering

Master's thesis in the field of chemistry, analysis, abstract. In this research, the synthesis of polymer nanoparticles of ion template using sedimentation method and for the separation and preconcentration of nickel ions from aqueous samples is reported. Nickel template polymer nanoparticles by dissolving stoichiometric amount of nickel nitrate and ligand ...

Number of pages: 75 Category: Chemical - Petrochemical Engineering

Master's thesis in the field of chemistry, analysis, abstract. In this research, the synthesis of polymer nanoparticles of ion template using sedimentation method and for the separation and preconcentration of nickel ions from aqueous samples is reported. Nickel template polymer nanoparticles by dissolving stoichiometric amount of nickel nitrate and ligand ...

Number of pages: 91 Category: Chemical - Petrochemical Engineering

Dissertation for Master's Degree in Organic Chemistry Abstract: The new works carried out in this thesis include the condensation reaction of arylglyoxals prepared during the oxidation of acetophenones related to selenium dioxide with 1,2-diaminobenzene, 2,3-diaminomalonitrile, 2,3-diaminopyridine and 4-nitro-1,2-diaminobenzene in order to prepare quinoxalines and the ...

Number of pages: 104 Category: Chemical - Petrochemical Engineering

Master's Thesis in Chemical Engineering (Process Simulation and Control) Abstract Modeling and Simulation of the Electrostatic Desalination Process of Crude Oil by Elham Ariafard The aim of this research is to model the desalination process of crude oil based on the population balance method. For this purpose, the one- and two-stage electrostatic desalination process, which ...

Number of pages: 90 Category: Chemical - Petrochemical Engineering

Master's degree thesis in the field of chemical engineering, thermokinetic and catalyst orientation. Abstract The purpose of this research is to estimate the electrical conductivity of natural waters based on modern mathematical methods. To achieve this, the waters of the Karaj and Jajrud rivers are considered as special cases. For this purpose, 20 sampling stations were ...

Number of pages: 102 Category: Chemical - Petrochemical Engineering

Master's degree thesis, field: Chemical Engineering Abstract: In this research, the absorption of methyl orange dye, which is one of the most widely used dyes in the textile industry, by polypyrrole adsorbent based on polyvinyl alcohol has been investigated. The tests were performed in a discontinuous system using a colored solution with a concentration of 40 ppm. After ...

Number of pages: 140 Category: Chemical - Petrochemical Engineering

Master's thesis in the field of chemical nanoengineering, abstract modeling of chloride ion removal from gas condensate using nanofiltration of chloride ion in gas condensate can cause severe corrosion of equipment and pipes. Therefore, it is necessary to remove it from the condensate flow. The aim of this work is the mathematical modeling of the nanofiltration process for the ...

Number of pages: 63 Category: Biology - Environment

Thesis for receiving a master's degree in the field of chemical engineering, environmental orientation. Abstract: Ethylenediaminetetraacetic acid, due to its ability to solubilize and deactivate metal ions by forming a complex in the aqueous environment, has many applications, especially as a chelating agent for iron fertilizer. The synthesis of this substance is done in ...

Number of pages: 87 Category: Medical Sciences

Dissertation for Doctorate Degree in Dentistry Abstract The purpose of this study was to compare the microleakage of adhesive total etch and self etch using three methods of Fluid filtration, dye penetration and dye extraction, as well as to determine the statistical relationship between these three methods. Materials and methods In this laboratory study, 72 extracted human ...

Number of pages: 129 Category: Chemical - Petrochemical Engineering

Petroleum Engineering Master's Thesis Abstract Phosphoric acid is the second most consumed mineral acid in the world and is used as a raw material in the production of detergents, food and pharmaceutical products. In this sense, the purification of phosphoric acid is one of the essential needs of consuming industries. 95% of acid consumed in industries that need pure phosphoric ...

Number of pages: 116 Category: Veterinary Medicine

Dissertation: To obtain the degree of professional doctor of veterinary medicine (D.V.M.) Farsi abstract title: Evaluation of the total dissolved solids (TDS) factor in the drinking water of poultry farms in Piranshahr city. Water is considered one of the most important chemical substances in terms of biology and exists in solid, liquid, and vapor forms in nature. Water is one ...

Number of pages: 167 Category: Biology - Environment

Dissertation for Master's Degree in Mechanical Engineering Abstract: Nowadays, due to the increase in population in big cities, building high-rise buildings and residential towers may seem inevitable. But in locating these types of buildings and placing them together, a series of environmental requirements must be observed. In this thesis, an attempt has been made to re-evaluate ...

Number of pages: 97 Category: Chemical - Petrochemical Engineering

Dissertation for Master's Degree in Analytical Chemistry Abstract Nowadays, nanostructures have attracted the attention of many researchers due to their new features and applications in different fields and branches of science and technology. Meanwhile, nanocomposites, due to their unique physical and chemical properties, as well as potential applications in catalytic, ...

Number of pages: 104 Category: Agricultural Engineering

Master's Thesis in Soil Science Abstract: Today, tracking in water and soil issues has found a much wider application compared to the past. Examining the hydraulic connection and hydrodynamic characteristics of underground water tables, evaluating the origin and spread of pollution are among the most important applications of this method. In our country, along with the ...

Number of pages: 183 Category: Food and Packaging Industries

Persian Abstract Effect of salinity stress on the growth characteristics of some selected almond genotypes (Prunus dulcis) grafted on GF677 base, the combination of rootstock and scion can affect the growth characteristics and nutrient concentration of almond leaves and roots under salt stress conditions. In order to evaluate the effect of salinity stress on morphological, ...

Number of pages: 89 Category: Fisheries

Master's Thesis on Aquatic Ecology, Fisheries Abstract Rivers, as one of the most important water resources, are very vulnerable to human activities. Creating reservoirs and dams is one of the oldest forms of human intervention in aquatic ecosystems. Despite the many benefits (hydroelectric energy production, flood control and water level regulation), dams also have the ...

Number of pages: 103 Category: Chemical - Petrochemical Engineering

The thesis for obtaining a master's degree in the field of organic chemistry, abstract protection and deprotection of functional groups is one of the inevitable steps in the synthesis of multi-functional compounds. Selective protection of carbonyl groups is very important in modern organic chemistry. 1-Diacetates are one of the basic protective groups of the carbonyl functional ...

Number of pages: 93 Category: Food and Packaging Industries

Dissertation for Master's Degree in Agricultural Engineering, Food Science and Technology, Food Technology, Abstract The purpose of this study was to investigate the antimicrobial effect of cactus seed extract as an alternative to chemical preservatives on the chemical, microbial and sensory characteristics of French salad dressing. The tested treatments are French sauce ...

Number of pages: 106 Category: Agricultural Engineering

Abstract: Salinity stress is one of the most important abiotic stresses in the world, and its negative effects on the growth of agricultural plants have led to an increase in research on salinity tolerance with the aim of improving plant tolerance. In addition to increasing growth, potash fertilizers help to improve product quality and increase plant resistance against adverse ...

Number of pages: 131 Category: Food and Packaging Industries

Thesis for receiving a master's degree in the field of agricultural engineering, food science and food industry, food technology, abstract. Halva in Iran, despite its high potential in diversity and creating added value, has not been industrially produced to date, and the purpose of this research is to investigate the formulation of wheat flour halva and its production and ...

Number of pages: 74 Category: Food and Packaging Industries

Dissertation for M.Sc. in Food Engineering, Agricultural Orientation Abstract The focus of recent research has been photochemical substances derived from plants, which are due to their positive effects on human health. During processing in factories, food can be enriched with active compounds such as phenolic compounds that have benefits and physiological properties such as ...

Number of pages: 57 Category: Agricultural Engineering

Dissertation for Master's Degree (M.Sc.) Field: Horticulture-Ornamental Plants Abstract To investigate the effect of gap and silver nanoparticles on the life of the flower and the hyphae characteristics of Alstroemeria hybrida cut flowers, a 2-factor factorial experiment based on a completely randomized design with two factors of stem end gap in 2 levels (5 cm gap and no gap) ...

Number of pages: 145 Category: Agricultural Engineering

Dissertation for Master's degree (M.Sc) major: Agriculture, investigating the effect of several types of pretreatment on Maritigal plant seeds (Silybum marianum) under several levels of salinity stress. Abstract: According to the available statistics at the global level, after China, India and Pakistan, Iran has the highest percentage of saline lands, so it is necessary to ...

Number of pages: 66 Category: Agricultural Engineering

Dissertation for Master's Degree in Agricultural Engineering (M.Sc) Abstract This experiment was carried out to investigate the effect of different treatments on the dormancy of wild oat seeds in the form of a completely randomized design (CRD) in two phases, laboratory and greenhouse, in 2011. The tested treatments included potassium nitrate with percentages of 0.6, 0.4, and ...

Number of pages: 50 Category: Food and Packaging Industries

Dissertation for Master's Degree in Food Science and Technology, Food Technology, Abstract: Today, the world is facing a tsunami of non-communicable diseases, among which cardiovascular diseases and cancer are the biggest killers of the century, and blood pressure is known as the leading cause of death for Iranians. Modifying the nutrition style is the key and the way to prevent ...

Number of pages: 106 Category: Agricultural Engineering

Dissertation for Master's Degree in Water Resources Engineering Abstract Nowadays, due to the issue of water crisis and the need for accurate planning, the use of statistical models and methods is increasing. The research conducted in this field has also shown the usefulness of using statistical methods. The use of different forecasting methods has many advantages, including ...

Number of pages: 56 Category: Food and Packaging Industries

Abstract This research was conducted in order to investigate the absorption characteristics of cobalt, cadmium and nickel metals using lemon peel. The effect of different parameters such as solution pH, amount of adsorbent, contact time and temperature on the absorption process was investigated and the optimal operating conditions for the absorption of each element on the ...

Number of pages: 78 Category: Animal Husbandry - Poultry Farming

Dissertation to receive a master's degree in agricultural engineering, food science and industry, orientation: food microbiology Abstract Cheese is one of the most nutritious and important milk products and the most important dairy product, which is the result of coagulation of cow, sheep, goat and ewe milk or a mixture of 2 or more types of them that is pasteurized by one of ...

Number of pages: 168 Category: Mining Engineering

Dissertation for Master's Degree in Rock Mechanics Introduction Excavations made in rocks have different dimensions according to their purpose and vary from small dimensions to dimensions comparable to huge concrete structures. Surface excavations can be used as a space for extracting mines, creating buildings, and supporting and overflowing dams, factories, power plants, as ...

Number of pages: 89 Category: Biology - Environment

Master's Thesis in Mechanical Engineering, Energy Conversion, Abstract Due to the lack of fresh water resources, it is of great importance to discover new ways of water production. One of the new methods of producing fresh water in low capacity is the use of air humidity, which is known as condensation water production system. In this method, the flow of hot and humid air is ...

Number of pages: 91 Category: Facilities - Mechanics

Mechanical Engineering, Manufacturing and Production Department, Master's Thesis, Introduction High-speed rolling bearings have many applications in rotating machines, whose task is to separate the rotating parts from the fixed parts of the machine. Accuracy is very important in machine tool applications and bearing corrosion resistance in chemical machines. In aerospace ...

Number of pages: 55 Category: Agricultural Engineering

Abstract This experiment was conducted in order to investigate the effect of different levels of nitrogen fertilizer (50, 100, 150 and 200 kg/ha) and foliar application of low consumption elements zinc, boron and the mutual effects of zinc and boron on the yield of sesame, a local cultivar of Peldasht, at Khoi Agricultural and Natural Resources Research Station in 2013 crop ...

Number of pages: 75 Category: Fisheries

Dissertation to receive a master's degree in natural resources engineering - reproduction and breeding of aquatic animals Abstract: The purpose of this study is to investigate the possibility and effects of replacing plant resources in the diet of rainbow trout. For this purpose, a combination of vegetable protein sources with the main source of wheat gluten along with corn ...

Number of pages: 51 Category: Fisheries

Abstract This study was conducted to determine the effect of different levels of vitamin E and C on growth indices and blood parameters in flowerhorn fish (Cichlosoma sp). 9 diets containing a combination of 0, 100 and 1000 mg/kg of food of vitamin E and 0, 100 and 1000 mg/kg of food of vitamin C were considered in three replicates for 8 weeks. The initial weight of the fry was ...

Number of pages: 61 Category: Agricultural Engineering

Thesis for obtaining a master's degree, field: agricultural engineering, major: agriculture, abstract: there are about 238 thousand hectares of rice fields in Gilan province. In order to maintain sustainable agriculture, increase production, create employment, increase the financial capacity of farmers, observe crop rotation and thus preserve the environment, planning and ...

Number of pages: 124 Category: Chemical - Petrochemical Engineering

Master's Thesis in Energy Systems Abstract Crude oil distillation unit is one of the most important and critical operational units of any refinery. This unit often requires revision in the design of the structure (Revamping) or making small changes in its existing condition without the need to reduce or increase the basic process devices (Retrofitting) in order to achieve higher ...

Number of pages: 104 Category: Agricultural Engineering

The thesis for receiving the master degree ""M.sc"" in the field of agricultural engineering, agriculture, abstract, with the aim of investigating the effect of organic matter on the growth and yield of potato cultivars, with the aim of producing a pure experimental product in a factorial format, in the form of a randomized complete block design with 3 replications, was carried ...

Number of pages: 81 Category: Agricultural Engineering

Dissertation for Master's Degree in Horticultural Engineering Abstract: Achieving sustainable agriculture along with increasing the yield of agricultural products and ensuring the health of society is one of the goals of researchers in the agricultural sector. In the last few decades, the use of chemical inputs in agricultural lands has caused many environmental problems, ...