Download more than 43 examples of thesis, proposal and project topics about nickel nitrate in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Dissertation for obtaining a master's degree in the field: horticulture, ornamental plants. Abstract This study was conducted in order to investigate the effect of nickel on the life after harvesting of gerbera flower in the form of a completely randomized design with three replications. Healthy gerbera flowers (Gerbera jamesonii cv. 'Intense') were purchased from a commercial ...
Master's thesis in the field of chemistry, analysis, abstract. In this research, the synthesis of polymer nanoparticles of ion template using sedimentation method and for the separation and preconcentration of nickel ions from aqueous samples is reported. Nickel template polymer nanoparticles by dissolving stoichiometric amount of nickel nitrate and ligand ...
Master's thesis in the field of civil engineering (environmental engineering) is an abstract of the surface absorption method, one of the effective methods for removing metals, including nickel metal. In this research, modified rice paddy has been used as absorbent material. Since this adsorbent is a natural material with a high contact surface, in addition to its high ability ...
Dissertation for M. Sc. Abstract Nitrates, nitrites and ascorbic acid are present in a wide range of foods. Vegetables are an important source of nitrate, nitrite and ascorbic acid absorption in the diet. The purpose of this research is to investigate the effect of freezing and cooking process on the amount of nitrate, nitrite and ascorbic acid of commonly consumed vegetables. ...
Food Science Engineering Thesis for receiving the master's degree ""M. Sc"" Abstract Nitrate, nitrite and ascorbic acid are present in a wide range of foods. Vegetables are an important source of nitrate, nitrite and ascorbic acid absorption in the diet. The purpose of this research is to investigate the effect of frying and boiling process on the amount of nitrate, nitrite and ...
Abstract In the present study, the effect of conditions (boiling) and storage time (9 days) on the content of ascorbic acid, nitrate and nitrite of 5 vegetable samples (broccoli, red cabbage, white cabbage, chives and mushrooms) were evaluated and the results were analyzed by spss 16.0 software. The results obtained from the statistical analysis showed that among the samples, ...
Department: Plant Products Master's Thesis in Plant Products-Horticulture Abstract Rose (Rosa hybrida) is considered one of the most popular flowers in the world and its cut flower branch is the most used among other flowers. Due to the physiological reasons of being a rose cut flower, during its shelf life, it is highly susceptible to withering and reducing its freshness and ...
Abstract This research was conducted in order to investigate the absorption characteristics of cobalt, cadmium and nickel metals using lemon peel. The effect of different parameters such as solution pH, amount of adsorbent, contact time and temperature on the absorption process was investigated and the optimal operating conditions for the absorption of each element on the ...
Dissertation for M.Sc. Degree: Food Industry 1.1 Introduction Along with the increase in population, the demand for food has also increased and this has caused the excessive use of chemical and organic fertilizers to increase crop production (Ardkani et al., 2005). Vegetables are rich in vitamins, minerals and antioxidant compounds, whose anti-cancer properties have been proven ...
Dissertation for M.Sc degree, major: food science and technology. Abstract To conduct this research, samples of spinach (Damghan), tomato (Dezful), lettuce (Varamin), celery (Tehran), zucchini (Gorgan), eggplant (Qasrshirin) were purchased from Damghan market in June 2013. Nitrate, nitrite and ascorbic acid concentrations were measured in the edible parts of each sample. The ...
Dissertation for Master's Degree in Clinical Psychology ((M.A)) Abstract: The present study was conducted with the aim of comparing identity styles and coping styles and behavioral activation/inhibition systems in addicts and normal people. The method used was causal-comparative and the research tool included Berzonsky's Identity Styles Questionnaire, Andler Parker's Coping ...
Pasture and Watershed Department Thesis for Master's Degree in Desertification Abstract Menarid International Project is the first multi-land project that seeks to establish partnership and organizational cohesion at three levels of people, governmental organizations and non-governmental organizations for the purpose of sustainable land management with an emphasis on sustainable ...
Dissertation for receiving a Master's degree (M.Sc.) specialization: Environment Abstract Gaseous liquids obtained from the refining of sour gases are also sour and contain a large percentage of hydrogen sulfide and mercaptans. Therefore, after distilling and preparing the products, it needs refining processes to remove or reduce the amount of sulfur and mercaptans present. ...
Dissertation for M.Sc degree, field: chemical engineering, orientation: biotechnology, research method: first, the surface of the gold electrode was coated with nickel and cobalt salt in suitable conditions, then the standard solution of atrazine poison was placed in contact with the modified electrode, and after optimizing a series of mechanical and chemical parameters, its ...
Doctoral Dissertation in the field of Civil Engineering - Water and Environment Abstract Network methods are among the most widely used groundwater modeling tools that have been widely spread and accepted in the last two decades. On the other hand, the advancement of computing power of computers and the ease of access to them have led to the rapid development of numerical ...
Master's degree thesis in the field: Chemical Engineering Abstract In this project, an attempt was made to take a small step towards the synthesis of silicoaluminophosphate molecular sieve in nano dimensions and its use in fuel cells with methanol fuel. Therefore, in this way, nano silicoaluminophosphate was produced under optimal hydrothermal conditions. Next, XRD, FT-IR, SEM ...
Dissertation for Master's Degree in Physical Education and Sports Sciences - Sports Physiology Abstract: Background and Objective: During metabolic changes during pregnancy, the mother's contact with heavy metals is considered very important for placental function and fetal health. But it has been assumed that endurance training by affecting the activity of metalloproteins such ...
Medical Biotechnology Master's Thesis Background Abstract: Fibroblast growth factors (FGF) and their receptors (FGFR) play an essential role in the cell. Dysregulation of FGF/FGFR signaling pathways is associated with many abnormalities and cancer development. From this group, type 2 fibroblast growth factor receptor plays an essential role in cell signaling and regulation of ...
Dissertation for Master's Degree in Organic Chemistry Abstract: The new works carried out in this thesis include the condensation reaction of arylglyoxals prepared during the oxidation of acetophenones related to selenium dioxide with 1,2-diaminobenzene, 2,3-diaminomalonitrile, 2,3-diaminopyridine and 4-nitro-1,2-diaminobenzene in order to prepare quinoxalines and the ...
Dissertation to receive a master's degree in the field of chemical engineering, thermokinetic orientation. Abstract With the increase in the use of fuel cells in the industry and as an on-site application, there is a need to develop production units on the site of hydrogen. In this research, a monolithic catalytic reformer in which autothermal reforming of methane takes place is ...
In order to receive a general doctorate in the field of dentistry Abstract Introduction: This study was conducted in order to investigate the effects of cedar honey in the treatment of atrophic lichen planus and oral erosion. Materials and methods: The current research is a clinical trial study that continued from September 2018 to September 2019. 30 patients (2 men and 28 ...
Master's Thesis in Chemical Engineering (Process Simulation and Control) Abstract Modeling and Simulation of the Electrostatic Desalination Process of Crude Oil by Elham Ariafard The aim of this research is to model the desalination process of crude oil based on the population balance method. For this purpose, the one- and two-stage electrostatic desalination process, which ...
Dissertation for receiving the degree of Doctor of Dentistry Abstract The long-term clinical success of implants is dependent on osseointegration and adhesion of soft tissues and epithelium to implant surfaces. Various indices including: plaque index, gingival index, bleeding during probing and bone resorption are used to evaluate the health of the soft tissues around the ...
Master's thesis in the field of chemical-biotechnology engineering Abstract Protozoan protein refers to the protein obtained from the cultivation of bacteria, yeasts, filamentous fungi or algae, which can be used as human food or animal feed. In fact, protozoan protein is the dried cells of microorganisms that are obtained by their fermentation on different substrates. ...
Doctoral thesis in the field of chemical engineering. Abstract The study of the effective parameters in the synthesis of silver nanoparticles by the inverse microemulsion method of metallic silver nanoparticles is of interest due to their use as catalysts, antimicrobial agents and biosensors. The practical use of silver nanoparticles is highly dependent on the size distribution ...
Dissertation for Doctorate Degree in Dentistry Abstract The purpose of this study was to compare the microleakage of adhesive total etch and self etch using three methods of Fluid filtration, dye penetration and dye extraction, as well as to determine the statistical relationship between these three methods. Materials and methods In this laboratory study, 72 extracted human ...
Dissertation for Master's Degree in Organic Chemistry Abstract Today, lung cancer is considered one of the most common diseases worldwide and has the highest mortality rate among all types of cancer. Therefore, early diagnosis of this disease is of special importance. Considering that the common methods for detecting lung cancer are expensive and time-consuming, offering cheaper ...
Dissertation for Master's Degree (M.Sc) Direction: Applied Chemistry Persian Summary According to international standards, the sulfur in the fuels used in the transportation industry, as one of the most important polluting industries, should be reduced to about 10 ppmw, while many refineries in the world produce fuels with a sulfur content of more than 1000 ppmw. One of the new ...
Dissertation for receiving a master's degree in the field of agricultural engineering, science and food industry, food microbiology. Abstract The antimicrobial effect of elderberry kernel extract as a substitute for chemical preservatives in the market was investigated on the chemical, microbial and sensory characteristics of mayonnaise. The measurements showed that the ...
Master's Thesis of Polymer Industry Engineering Abstract With the progress of human civilization, technology development and the ever-increasing population, the world is currently facing a problem called pollution that threatens the lives of the inhabitants of the earth. Pollution caused by the accumulation of persistent toxic compounds in soil and water, such as chemicals, ...
Dissertation for Master's Degree in Analytical Chemistry Abstract Nowadays, nanostructures have attracted the attention of many researchers due to their new features and applications in different fields and branches of science and technology. Meanwhile, nanocomposites, due to their unique physical and chemical properties, as well as potential applications in catalytic, ...
Dissertation for receiving M.Sc degree in mechanical-structural engineering and the production of aluminide permeable coatings for the protection of gas turbines used in power plant, aviation, marine, oil and gas and petrochemical industries, which are mainly attacked by high temperature oxidation and hot corrosion phenomena. In this research, in order to use the effect of ...
Abstract: After wheat, rice is one of the most important grains consumed by the people of the world, which is widely present in people's diet. Half of the world's population depends on rice as a staple food. There are many items of rice in the world and now rice is one of the strategic products of the country. Contamination of rice with heavy metals may be a serious threat to ...
Master's Thesis on Aquatic Ecology, Fisheries Abstract Rivers, as one of the most important water resources, are very vulnerable to human activities. Creating reservoirs and dams is one of the oldest forms of human intervention in aquatic ecosystems. Despite the many benefits (hydroelectric energy production, flood control and water level regulation), dams also have the ...
Master's Thesis in Polymer Science and Technology Abstract: Today, cancer is one of the most important concerns of the medical world, for which no definitive cure has been found so far. Radiation therapy is one of the methods used to control and reduce the complications of cancer. Brachytherapy is one of these radiation therapy methods in which the radiation source is placed ...
Dissertation for Master's Degree (M.Sc.) Field: Horticulture-Ornamental Plants Abstract To investigate the effect of gap and silver nanoparticles on the life of the flower and the hyphae characteristics of Alstroemeria hybrida cut flowers, a 2-factor factorial experiment based on a completely randomized design with two factors of stem end gap in 2 levels (5 cm gap and no gap) ...
Dissertation for Master's Degree in Agricultural Engineering (M.Sc) Abstract This experiment was carried out to investigate the effect of different treatments on the dormancy of wild oat seeds in the form of a completely randomized design (CRD) in two phases, laboratory and greenhouse, in 2011. The tested treatments included potassium nitrate with percentages of 0.6, 0.4, and ...
Dissertation for M.Sc Master's degree, mechanical engineering-applied design Abstract With the emergence of composite materials, a huge progress was achieved in many engineering applications. Nevertheless, problems such as delamination, stress concentration, and discontinuous distribution of stress, the idea of ??creating a new type of composite materials in which properties ...
Mechanical Engineering, Manufacturing and Production Department, Master's Thesis, Introduction High-speed rolling bearings have many applications in rotating machines, whose task is to separate the rotating parts from the fixed parts of the machine. Accuracy is very important in machine tool applications and bearing corrosion resistance in chemical machines. In aerospace ...
Abstract This experiment was conducted in order to investigate the effect of different levels of nitrogen fertilizer (50, 100, 150 and 200 kg/ha) and foliar application of low consumption elements zinc, boron and the mutual effects of zinc and boron on the yield of sesame, a local cultivar of Peldasht, at Khoi Agricultural and Natural Resources Research Station in 2013 crop ...
Abstract This study was conducted to determine the effect of different levels of vitamin E and C on growth indices and blood parameters in flowerhorn fish (Cichlosoma sp). 9 diets containing a combination of 0, 100 and 1000 mg/kg of food of vitamin E and 0, 100 and 1000 mg/kg of food of vitamin C were considered in three replicates for 8 weeks. The initial weight of the fry was ...
The thesis for receiving the master degree ""M.sc"" in the field of agricultural engineering, agriculture, abstract, with the aim of investigating the effect of organic matter on the growth and yield of potato cultivars, with the aim of producing a pure experimental product in a factorial format, in the form of a randomized complete block design with 3 replications, was carried ...