Download more than 100 examples of thesis, proposal and project topics about nanosilica particles in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Dissertation for Master's Degree in Civil Engineering - Structures Abstract: One of the important problems in seismic design and implementation of buildings is the significant dead weight used in it. Therefore, in the case of using lightweight concrete that has favorable mechanical properties, significant benefits can be obtained, including a reduction in dead load and ...
Education Level: Master's Degree, Field: Civil Engineering, Major: Structures Abstract: In this thesis, the effect of nanosilica on the mechanical properties and durability of concrete containing polypropylene fibers was investigated. Polypropylene fibers with a length of 18 mm and a ratio of length to diameter of 0.9 mµ were used. The effect of fibers and nanosilica in three ...
Summer 1390 Expertise Master of the field: Civil Engineering Orientation: Structure Abstract: In this thesis, the effect of nanosilica on the mechanical properties and durability of concrete containing polypropylene fibers
Dissertation for obtaining a master's degree in chemistry, fluoride has been known as a toxic ion for many years. The main source of fluoride in aqueous solutions is minerals containing fluoride and the industrial activities of factories. According to the report of the Environmental Protection Organization, the amount of fluoride more than 1 mg/liter causes various diseases. In ...
Dissertation to receive a master's degree in the field of Analytical Chemistry, Abstract Biosynthesis of gold nanoparticles with small size and biological stability are very important and have various biomedical applications. In this work, an easy and simple method for the green synthesis of gold nanoparticles using willow tree bark extract is reported. The bark of the willow ...
Master's Thesis in Nano Chemical Engineering Abstract The aim of this study is to separate cationic polyacrylamide from the waste water of Prodeh Tabas coal washing plant using the polymer membrane filtration process. The primary membrane was prepared using polyacrylonitrile (PAN) by phase inversion process, and then they were prepared using hydrolysis as chemical modification ...
Master's Thesis in Chemical Engineering, Thermodynamics and Kinetics Abstract: A major part of the final properties of the product in emulsion polymerization is determined by the particle size distribution. In this project, an accurate model based on population balance equations (zero-one model) which includes the phenomena of nucleation and particle growth has been chosen to ...
Master's Thesis (M.Sc.) Direction: Process Design Abstract Currently, membranes have found a special place in different separation industries and have wide applications in different fields of separation, including liquid solutions and different gases. Membrane technology is one of the most widely used technologies in today's industry, whose field of application is wide ranging ...
Master's thesis in the field of chemical nanoengineering Abstract The synthesis of silicon dioxide nanoparticles from silicon oil waste using the synthesis method of silicon dioxide nanoparticles [1] has many industrial applications. The industrial use of these particles in traditional fields as well as new fields is expanding, for which new applications are continuously found. ...
Dissertation for Master of Chemical Engineering Abstract: In this research, it is attempted to solve one of the major problems in the field of drug production, i.e. improving the solubility of drug particles in body fluids[1] by using the process of solvent/anti-solvent precipitation and nano-scale sediment production in a ?-shaped microchannel, the effect of surfactant ...
Dissertation for receiving the master's degree ""M.Sc."" Orientation: Biotechnology Abstract: Lipases are one of the most important enzymes in biological systems in various industries. The application of free lipase is not cost-effective in industries due to its shorter half-life. Enzyme immobilization on different bases increases stability, repeated use, ease of product ...
Doctoral thesis in the field of chemical engineering. Abstract The study of the effective parameters in the synthesis of silver nanoparticles by the inverse microemulsion method of metallic silver nanoparticles is of interest due to their use as catalysts, antimicrobial agents and biosensors. The practical use of silver nanoparticles is highly dependent on the size distribution ...
Master's Thesis of Polymer Industrial Engineering Abstract Cross-linked polyethylene is one of the materials that is widely used in the field of insulation production in cables due to having suitable electrical properties and good electrical strength. Nowadays, one of the methods of optimizing the properties and changing the behavior of polymers is the use of filler particles ...
Dissertation for Master's Degree (M.Sc.) Field: Horticulture-Ornamental Plants Abstract To investigate the effect of gap and silver nanoparticles on the life of the flower and the hyphae characteristics of Alstroemeria hybrida cut flowers, a 2-factor factorial experiment based on a completely randomized design with two factors of stem end gap in 2 levels (5 cm gap and no gap) ...
Dissertation for Master's Degree (M.Sc) Abstract Chrysanthemum (Chrysanthemum morifolum L.) is one of the most important cut flowers in the world, which today ranks second in the world after roses in terms of economy and cultivation. One of the important problems of this flower is vascular blockage and disruption of the water balance. For this purpose, a study based on a ...
Dissertation for Master's Degree in Agricultural Engineering (M.Sc) Major: Food Science and Industry Abstract Diazinon is an organophosphorus insecticide and is widely used by farmers. This poison can easily find its way into food and exert its toxic effects on humans. Diazinon poison, like other organophosphorus poisons, inhibits some enzymes, especially acetylcholinesterase. ...
Master's Thesis on Energy Conversion Abstract: Increasing heat transfer as well as increasing the efficiency of energy storage systems due to the limitation of natural resources and with the aim of reducing costs has always been one of the most basic concerns of engineers and researchers. This is especially important in fluids due to the small thermal conductivity coefficient. ...
Thesis for receiving a master's degree in the field of civil engineering of hydraulic structures, October 2013 This study is to quantitatively evaluate the effects of watershed operations and with the aim of evaluating the efficiency of projects
Master's Thesis of Faculty of Art and Architecture, Department: Carpet (Painting), October 2013 Abstract: Today, in today's advanced and industrialized world, using new methods, it is trying to make Tul products
Dissertation for Master's Degree in Polymer Industry Engineering April 2013 Abstract Nowadays, the topic of energy and energy saving in all fields, even in homes, is one of the most important.
Chapter 1 1-1-Introduction: Common fluids such as water, oils and ethylene glycol, which are usually used as heat transfer media, have a limited ability in terms of thermal properties, which is the first obstacle to compress and increase the efficiency of heat exchangers. One of the ways to improve heat transfer is to add particles to the fluid. This method is used for fluids ...
Dissertation for Master's Degree (M.A) in the field of Natural Geography, Climate Hazards Abstract Dust storms are destructive weather phenomena that cause irreparable damage to urban areas, fields, facilities, roads, etc. every year. This phenomenon is affected by special weather conditions, and if the mechanism of its development and expansion is known, it is possible to ...
Dissertation for obtaining a master's degree in the field: Natural Geography, specialization: Geomorphology in environmental planning. Abstract: Flood is one of the most destructive natural disasters, which is usually associated with a lot of human and financial losses. Floods every year in the corners of the country cause a lot of damage to economic resources. The occurrence of ...
Master's thesis in the field of natural geography, climatology and environmental planning, abstract human civilization is based on the stability of climatic conditions, therefore climate change can be considered a threat to human civilization. In recent years, climate scientists have tried to trace these changes for some climatic elements, the most important of which is ...
Dissertation to receive the master's degree ""M.S.c"" specialization: Textile chemistry and fiber science Abstract: One of the important processes in the completion of textile goods is the underhand improvement in textiles. Finishing the softener provides a desirable softness to the fabric and improves its properties, and the main goals of the softener are to reduce static ...
Chapter 1 1-1-Introduction Climate[1] is a complex system[2] that is changing mainly due to the increase of greenhouse gases. During the 20th century, especially in the last two decades, the climate of the earth lost its balance and showed a tendency to increase the temperature (Rahimiu et al., 2012). According to many experts, climate change is a natural phenomenon[3] that has ...
Dissertation for M.A. Orientation: Natural Geography (Geomorphology-Hydrology) Abstract The increasing population growth followed by the development of industrial activities on the one hand and non-compliance with environmental requirements on the other hand, has caused huge amounts of pollutants to enter the environment in the last few decades. Accumulation of some dangerous ...
Dissertation to receive a master's degree (M.A) in natural geography, specialization: climatology in environmental planning, abstract: natural disasters have been the most important cause of human concern at all times. Landslides are one of the most important natural disasters that cause financial and human losses every year, which creates problems in the implementation of ...
Master's thesis in the field of chemical engineering Kidney stones are one of the most common diseases in the world, most of its crystals consist of calcium oxalate crystals. Therefore, it has been a long time that the investigation of effective substances in controlling this disease through the control of calcium oxalate crystals has been considered. The purpose of this ...
To receive a master's degree in textile technology engineering. Abstract In the previous research, multi-sized nano-roughness was developed using nanoparticles with different sizes and different surface charges along with silicone resin coating to produce multi-purpose textiles with stable properties. In this research, the idea of ??using laser irradiation and finishing textiles ...
Master's Thesis in Mechatronic Engineering Introduction Recent developments in flexible manufacturing and information technology have made it possible for production systems to provide a wider range of products or services at a lower cost. In addition, the increase in competition at the global level has led to the confrontation of industries with the approach of increasing ...
Master's thesis in the field of power electronics, power electronics, Abstract: The use of pulsed power sources in various plasma processes is increasing due to the relationship established between them. According to the research done in this case, the design of pulsed power sources with the aim of reducing losses and increasing efficiency can have important effects on plasma ...
Dissertation for master's degree in electricity, power orientation Abstract: The production of electrical energy for power systems with the aim of minimizing the total cost of production for active units in the power network is one of the most important topics for today's modern systems. In other words, the purpose of economic load distribution is optimal and appropriate ...
Dissertation for Master's Degree in Civil Engineering Majoring in Environmental Engineering Abstract In this research, the effect of biological reactions on the removal of organic substances in wastewater during transfer from production sources to the treatment plant in conventional networks and new small diameter networks was investigated. For this purpose, a part of these ...
Doctoral Dissertation of Soil and Foundation Mechanics Abstract In this research, the discrete element method was used to analyze the wave propagation and investigate the factors affecting the wave speed in granular soils. The method of separate elements is important due to the possibility of preparing completely similar samples and checking the effect of changes of a certain ...
Dissertation for receiving the master's degree ""M. Sc."" Field: Agricultural Engineering Major: Water Structures Abstract The sediment transfer process is a completely complex, variable and non-linear phenomenon. So that the behavior of the river in the sediment transfer capacity for a certain discharge is different in different times. Therefore, due to the complexity of the ...
To receive a master's degree in civil engineering - water Abstract: Relaxation ponds should be designed in such a way that they can depreciate the potential energy stored in the reservoir water of dams and dams in such a way as to transfer it to the natural bed so as not to cause the loss of the bed and in critical conditions to destroy the pond and dam itself. In different ...
Master's thesis in the field of civil engineering (environmental engineering) is an abstract of the surface absorption method, one of the effective methods for removing metals, including nickel metal. In this research, modified rice paddy has been used as absorbent material. Since this adsorbent is a natural material with a high contact surface, in addition to its high ability ...
The effect of fiber and pozzolanic materials on the mechanical properties of glass fiber reinforced concrete Master's Thesis of Civil-Structural Engineering Abstract The failure and destruction of concrete is highly dependent on the formation of cracks and microcracks. With increasing loading, microcracks are connected and form cracks. In order to solve this problem and also to ...
Dissertation for Master's Degree in Civil Engineering - Soil and Foundation Mechanics Abstract The purpose of this research is to improve the mechanical and geotechnical properties of windy sand soils. Because one of the major problems of windblown sand is its low resistance under natural and saturated moisture conditions, a laboratory study was conducted to investigate the ...
Dissertation for Master's Degree in Civil Engineering - Earthquake Engineering Abstract The city of Birjand, as the capital of South Khorasan province, is located in the structural zone of Sistan, which is particularly sensitive due to its proximity to seismic and fundamental faults (Neh Khawri and Westi faults in the south, Ardkol fault in the northeast, Nawaz fault in the ...
Dissertation for receiving a master's degree in the field of civil engineering with a focus on soil and foundation. Abstract: The compressibility behavior of soils has become an important concern in geotechnical engineering. As buildings, embankments and roads are implemented, significant settlements often occur. Since long-term settlements occur due to creep, therefore, the ...
Dissertation for M.A. degree Abstract of this research, knowing the conditions governing the Fahlian River, determines the Manning roughness coefficient in the studied area using various experimental and semi-experimental methods and tables for use in designs. And it presents the best and most reliable method of determining the roughness coefficient using field studies and ...
Master's thesis in the field of civil engineering (hydraulic structures) abstract of sediment transfer and sedimentation, the consequences such as the creation of sediment islands in the river path and as a result the reduction of flood flow transfer capacity, corrosion of river structures and It includes other problems. Also, suspended sediments affect the quality of water for ...
Master's Thesis in Civil-Soil Field Abstract Dense clay layers are used as one of the most common impermeable layers in most geotechnical structures such as earthen dams and municipal and radioactive waste disposal centers. Due to special geotechnical characteristics, these layers are damaged by cracking during their lifetime, these cracks increase the permeability of the layer ...
Dissertation for Master's Degree in Civil Engineering, Marine Structures, Abstract: Tension-based platforms are among economic marine platforms for use in deep waters. The correct prediction of the platform's dynamic response to environmental loads is very important in its economic and safe design. In this research, the dynamic behavior of the tension base platform under the ...
Master's Thesis on Hydraulic Structures Abstract: Washing water around the existing structures in the flow path is one of the important issues that should be considered in the design of such structures. For this purpose, the investigation of this phenomenon around the circular bases in the condition of clear water was carried out in laboratory physical modeling. For this ...
Master's thesis in the field of electrical engineering (field) Abstract Analysis, simulation and construction of optimized microstrip antenna or metamaterial roll and use of particle aggregation optimization (PSO) algorithm Microstrip antennas are widely used due to their unique features such as reasonable manufacturing cost and low weight, especially in wireless systems. One of ...
A master's thesis in the field of electrical engineering - field telecommunications, abstract, investigation and analysis of leaf reflective structures in the field of plasmonics for the application of passive components in the design of optical integrated circuits, limits the diffraction limit of the miniaturization of optical elements. Surface plasmon polaritons that propagate ...
Dissertation for Master's degree (M.Sc) Major: Painting Chapter 1: Overview of the design Introduction The exact speed of light is 299792458 meters per second. He directs the matter from the heavens to the earth, and then ascends to Him on a day that is as much as a thousand years from what you do (Surah Sajdah, verse 5) ""God governs the affairs of the earth from space and ...
Master thesis M.Sc. Discipline: Civil Engineering, Orientation: Hydraulic Structures. Abstract River containment is generally done by dams and similar structures. The flow passing through these structures has a significant potential for erosion and scouring of susceptible beds. Relaxation ponds are designed and built mainly for the purpose of depleting flow energy and ...
Master's Thesis of Persian Language and Literature Abstract: Literary genres always have the capacity to change, combine and find new genres. One of these types is ""memory-story"". Memoir writing has been noticed and investigated in recent studies of narratology, which is the result of the new approach of man to himself and his place in the system of existence. Memories are ...
Master's thesis abstract shows the necessity of having a healthy environment and raising the health level of the society, the need to have proper planning to reduce the sources of air pollutants production and predicting these pollutants to prevent its harmful effects is inevitable. Prediction of pollutants can be useful in air pollution management and control. In this research, ...
Master's Thesis of Civil-Environmental Engineering Abstract Garbage is one of the environmental pollutants that cause many problems such as the spread of pollution in water, air and soil and transmission to humans and animals directly or indirectly. Today, with the ever-increasing expansion of urban and industrial societies, we are witnessing the widening of the amount of these ...
Dissertation of the master's course in electrical field (M. Sc) orientation: power Abstract: In this thesis, electrical and mechanical defects in electric machines are examined and the factors that cause them and the methods of fixing these defects are stated. After that, with the help of the winding function method of the simulation machine and the intended error, i.e. the ...
Master's thesis in the field of road, building and environmental engineering - hydraulic structures. In this research, the effect of geobags on the scour control of bridge piers has been studied using Computational Fluid Dynamics (CFD) method. Geobags are geotextile bags that are filled with materials such as sand, concrete or materials from river dredging. Due to the ...
Field of study: Electricity, specialization: Telecommunication. Dissertation Abstract In this thesis, the problems of multi-objective and multi-sensor tracking are investigated using the rule of random particle collection. The regression probability density hypothesis (PHD) is implemented dynamically. This dynamic mode is performed by combining the transfer bias value with the ...
Tendency of soil mechanics and foundations. Abstract: Investigating the behavior of soils due to different loadings is one of the most important issues in geotechnical engineering. The behavior of soils depends on several parameters such as grain size, grain type, loading method, stress history, etc. Non-alignment of main stress and main strain directions is a phenomenon that ...
Dissertation for receiving the master's degree ""MSc"" specialization: applied chemistry Farsi abstract of the thesis or dissertation (including: summary of objectives, implementation methods and results obtained in maximum 10 lines): The possibility of manipulating matter at the nano level was first proposed in written form by Richard Feynman. During his conference called ...
Dissertation for M.Sc degree, field: chemical engineering, orientation: biotechnology, research method: first, the surface of the gold electrode was coated with nickel and cobalt salt in suitable conditions, then the standard solution of atrazine poison was placed in contact with the modified electrode, and after optimizing a series of mechanical and chemical parameters, its ...
Dissertation for M.Sc. Master's degree Abstract: Nanostructures introduced with the pioneering of fullerene and carbon nanotubes have opened new horizons in various fields of science and technology, the most important of which is the use of nanostructures in biological sciences. Silicon carbide nanostructures are considered heteroatom nanostructures that have some ionic ...
Master's Thesis in the field of Chemical Engineering Abstract Investigation of parameters affecting the production of alumina gel by sol-gel method Sol-gel method is one of the common methods that is widely used to produce different nanoparticles. In this method, a solution of initiators is mixed with water in the presence of a catalyst, and hydrolysis and polymerization ...
Master's thesis in the field of chemical engineering, abstract of the design of the Driso ring base and the use of hydrocarbon solvent in the dehumidification process in Farashband refinery, water vapor is one of the most important impurities in the flow of natural gas. Usually, the water vapor itself is not a problem, but instead the liquid or solid phase that forms when the ...
Master's Thesis in Civil Engineering (Soil and Foundation) Abstract Dense sand piles have been used since 1950 in Japan and then in other countries of the world as one of the most effective and economical methods in strengthening soil in order to prevent liquefaction, increase bearing capacity and improve soils with different grain sizes. The process of implementing dense sand ...
Dissertation for Master's Degree (M.Sc.) Field: Gas Processing and Transmission Engineering Abstract: Today, one of the problems in gas transmission lines is the gas hydrate phenomenon, which is a combination of light gases such as methane, ethane or carbon dioxide with water molecules under certain temperature and pressure conditions to form an ice-like substance that contains ...
Master's thesis in the field of chemistry, analysis, abstract. In this research, the synthesis of polymer nanoparticles of ion template using sedimentation method and for the separation and preconcentration of nickel ions from aqueous samples is reported. Nickel template polymer nanoparticles by dissolving stoichiometric amount of nickel nitrate and ligand ...
Thesis for obtaining a master's degree. Abstract: The increase in environmental concerns and the progress of green chemistry processes have necessitated the replacement of homogeneous catalysts with heterogeneous ones. In this research, activated carbon was used as a suitable substrate due to its special properties. The most important of these properties are resistance in acidic ...
Dissertation for Master's Degree in Power Electrical Engineering Abstract In this thesis, a hybrid power generation system using fuel cell/battery/supercapacitor to power a light electric vehicle with independent excitation electric motor drive system was studied and simulated. The electric vehicle system consists of a feed and control system, multiple sources, power control ...
Dissertation to receive the degree of Doctor of Dentistry Abstract Introduction: One of the best methods for reconstructing bone defects in the mouth and teeth of patients is the use of autogenous grafting, which is still considered as the gold standard for augmentation of bone deficient areas. There are numerous intraoral areas for the removal of this bone graft, the maxillary ...
Master's thesis in the field: Chemical Engineering Abstract In this research, a comprehensive two-dimensional model based on the Finite Element Method (FEM) is proposed for modeling gas-solvent membrane contactors to remove carbon dioxide[1] from synthesis gas. Aqueous solution of monoethanolamine has been used as absorbent solvent stream and CO2/N2 gas mixture as gas stream. ...
Master's Thesis of Chemical Engineering Abstract In this research, the optimal absorption conditions for cationic dyes have been investigated and the removal of brilliant green dye [1] by the natural adsorbent of khakshir has been investigated. First, the effective conditions in the amount of brilliant green removal by the khakshir stem adsorbent were researched, then using the ...
Master's thesis in the field of chemical engineering, abstract of the laboratory study of iron oxide production on a microstructural scale using the precipitation method with supercritical anti-solvent by: One of the problems of cement used in oil wells, which are used to connect wall pipes and well walls, is that these cements do not have the desired resistance against high ...
A master's thesis in the field of chemical engineering, abstract of the laboratory study and modeling of calcium carbonate production from calcium chloride solution by absorbing carbon dioxide from industrial exhaust gases, by the efforts of Amin Alamdari, the effect of carbon dioxide concentration on the precipitation of calcium carbonate species and the kinetics of calcium ...
Master's degree thesis in the field: Chemical Engineering Abstract In this project, an attempt was made to take a small step towards the synthesis of silicoaluminophosphate molecular sieve in nano dimensions and its use in fuel cells with methanol fuel. Therefore, in this way, nano silicoaluminophosphate was produced under optimal hydrothermal conditions. Next, XRD, FT-IR, SEM ...
A master's thesis in the field of chemical engineering. Abstract of the laboratory study of the wear phenomenon of gas containing sand and liquid droplets in pipelines. For this purpose, a pipeline test device including: vertical and horizontal pipelines and various connections has been made. The studied fluid consists of three phases: gas, liquid and solid. The gas phase is ...
Doctoral Dissertation in Chemical Engineering-Biotechnology Abstract The purpose of this study was to produce polyhydroxyalkanoate biopolymer using glucose, fructose, molasses and whey carbon sources by microorganisms Azohydromonas lata DSMZ 1123, Azotobacterbeijerinckii DSMZ 1041, Cupriavidus necator DSMZ 545, Hydrogenophaga pseudoflava DSMZ 1034. In the first stage, to screen ...
Master's Thesis of Chemical Engineering Abstract In the last few decades, due to the growth of the population as well as the improvement of living standards, the consumption of fibers and the production of textile waste materials have increased greatly. Burial and burning are one of the main ways of managing textile waste materials, which have destructive environmental effects. ...
Academic Dissertation for Master's Degree in: Organic Chemistry 1-1) Introduction Today, nanotechnology [1] is an attractive subject that has attracted the attention of scientists, industrialists and even ordinary people due to the special properties and practical potentials of these materials. Considering the wide applications of carbon nanotubes, the methods of mass production ...