Download more than 39 examples of thesis, proposal and project topics about multilevel converters in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Dissertation of the master's degree in the field: Electrical Engineering - Power trend. Abstract Today, despite the wide use of sensitive loads such as power electronics, computers and non-linear loads in distribution networks, the issue of power quality has received more attention. Most of these loads are sensitive to voltage changes, such as undervoltage and overvoltage, and ...
Dissertation to receive a master's degree ""M.Sc"" in the field of electrical engineering, power, high voltage, abstract. Inverters can produce single-phase and three-phase ac voltages from a constant or variable dc voltage. There are various methods to control the output voltage of the inverter, which is introduced in this thesis from an inverter system with solar panel input. ...
Abstract Common-mode voltages and currents are generated due to the creation of parasitic capacitance between solar cells and their frame, which is usually grounded. These capacities are usually modeled as capacitors between the negative terminal of the solar cell and ground. In solar cells that are connected to the grid through a transformer, the electrical insulation of the ...
Master's Thesis in Electrical Engineering - Power Abstract Nowadays, pulse width modulation techniques are widely used to control the output voltage and current of AC/DC converters. Among these methods, space vector modulation (SVM) has received a lot of attention due to its simplicity and favorable properties in controlling three-phase inverters digitally. The limitation of ...
Dissertation for Master's degree (M.Sc) in the field of electrical-power engineering. Abstract In this thesis, the design of a resistant controller in power electronic circuit breakers and its comparison with linear control methods have been examined. The main goal of research and development in this field is always to find the most suitable control method in order to implement ...
Master's Thesis Farsi Abstract: Today, with the expansion of DC consumers and non-linear loads connected to the network, the design and construction of power factor correction circuits using electronic power converters has gained special importance. With the advancement of technology, integrated circuits have come to help in this field. Due to the complexity and non-linear ...
Dissertation for M.Sc. Abstract In this thesis, we have presented a new method in network processing with Ant algorithm. The model we used in the network space is a continuous two-way auction. Due to their simplicity and dynamics, these models are used in many algorithms used to control resources and schedule tasks. Many of these models have weaknesses in their response time ...
Dissertation for Master's Degree in Electrical Engineering, Power Systems, Abstract: During the last two decades, the electricity industry has undergone fundamental changes in the way it is produced, transmitted and distributed, which is referred to as restructuring. With the restructuring in the electricity industry, reactive power has been introduced as one of the most ...
Dissertation to receive a master's degree in electrical engineering, power trend. Abstract: Flexible power transmission systems, which are known as FACTS[1] compensators, are modern tools that have been used in power systems to strengthen the controllability and develop the transmission capacity of power networks based on power electronic converters during the last decade. In ...
Dissertation for master's degree in electrical engineering, power orientation Abstract: The use of renewable energy to produce electrical energy has increased increasingly with the expansion of the use of flexible alternating current transmission systems (FACTS), to compensate for the quality of power and voltage, the range of use of these energies has increased.
Master's Thesis in Chemical Engineering, Process Design, Abstract: In this thesis, a method for thermodynamic analysis and evaluation of energy consumption of distillation tower by using side cooling is introduced. The research done in the past was aimed at the distribution of the heat diagram and checking the possibility of adding or extracting heat from all the different parts ...
In order to obtain a master's degree in chemical engineering, abstract freezing of fans in operational units, including the hydrogen unit of Imam Khomeini Shazand Refinery in the cold seasons of the year is one of the important problems in this refinery. In order to provide a suitable solution to this problem, we must have a suitable estimate of the fan outlet temperature. The ...
Dissertation for M.Sc)) Electrical Orientation - Power Abstract Common-mode voltages and currents are generated due to parasitic capacitance between solar cells and their frame, which is usually grounded. These capacities are usually modeled as capacitors between the negative terminal of the solar cell and ground. In solar cells that are connected to the grid through a ...
Master's Thesis in Chemical Engineering Abstract of Electrochemical Analysis of Formaldehyde Formaldehyde is one of the organic chemicals that is widely used as a raw material in many industries. Industrial effluents that contain high concentrations of formaldehyde must be treated before entering the environment due to its possible carcinogenic and mutagenic risks. The purpose ...
Master's thesis in the field of electrical engineering (power trend) Abstract of the investigation of transient electromagnetic states in wind turbines with the increasing development of wind turbines, increasing its efficiency has become more critical. One of the factors for measuring wind turbine efficiency is its performance in transient state problems. The phenomena that ...
Master's Thesis, Electrical Engineering, Power, Abstract: The sliding mode control method is one of the most important non-linear control methods, whose distinctive characteristics are insensitivity to parameter changes, complete rejection of disturbance, and dealing with uncertainty. This controller first brings the system from the initial state using the law of reaching the ...
Master's Thesis in Electrical Engineering, Power 1-1 Introduction Energy supply sources in the last few decades have been from fossil sources, which until recently have been obtained almost cheaply. Cheap energy sources caused that the optimal use of energy and energy recycling were practically not paid much attention. Due to the energy shortage crisis and the sense of danger ...
Master's Thesis in the field of Electrical Engineering-Communication System, abstract of the investigation of the methods of removing interference signals in the surveillance channel in passive radars based on DVB-T signal. In this thesis, the performance of adaptive methods in weakening the interference signals including the direct path signal and clutter and the degree of ...
Thesis of the master's degree in the field: chemical engineering, abstract. In designing the network of heat exchangers, the designer usually considers high operational flexibility in the presented plan. However, some of the changes that occur in the operating conditions of the process after the design, determine the need to modify the existing network. The purpose of the ...
Dissertation to receive a master's degree ""M.Sc"" in the field of electrical engineering, power systems trend Abstract Today, significant advances in semiconductor technology and the emergence of high-power switches that have the ability to be turned off by a control signal on the one hand and the better efficiency of multi-level converters compared to two-level converters on ...
Dissertation for Master's Degree (M.Sc.) Orientation: Environment Abstract Based on the studies conducted, there are various processes for desulfurization of naphtha, which determine the method of desulfurization of naphtha, there are very determining parameters, and the type of sulfur compounds and operating temperature and pressure are one of the most important parameters that ...
Dissertation for Master's Degree Abstract Today, preventing losses caused by blackouts and undistributed energy is very important. Therefore, one of the most important issues in the operation of the distribution network is the renewal of the load, which has a great impact on the constant service to the subscribers. When a part of the network is cut off due to an error or ...
Abstract Photovoltaic or PV for short is one of the types of electricity generation systems from solar energy. In this method, by using solar cells, direct production of electricity from sunlight becomes possible. Solar cells are semi-conductors that are made of silicon, the second most abundant element in the earth's crust. When sunlight shines on a photovoltaic cell, a ...
Dissertation to receive a master's degree in electrical engineering, power orientation. Abstract: Flexible power transmission systems, which are known as FACTS[1] compensating devices, are modern tools that have been used in power systems to strengthen the controllability and develop the transmission capacity of power networks based on power electronic converters during the last ...
Dissertation for master's degree in electricity, power orientation Abstract: In the past, the structure of energy production and consumption systems, such as electricity and natural gas, were independent of each other. But due to the ever-increasing growth of energy consumption and the development of control systems and the need for coordination between energy production and ...
Thesis for master's degree in the field of electrical engineering (power) Farsi abstract: Today, with the expansion of DC consumers and non-linear loads connected to the network, the design and construction of power factor correction circuits using electronic power converters has gained special importance. With the advancement of technology, integrated circuits have come to help ...
Dissertation for receiving a master's degree in the field of electricity - the tendency of electric machines. Abstract In this thesis, the behavior of the wind power plant is investigated using the detailed model of induction generator with two-way feeding. Electronic converters of the power plant and its control systems and the behavior of the power plant include electrical and ...
Introduction Flexible Power Transmission Networks (FACTS[1]), is one of the aspects of the electronic revolution that is happening in all fields of electrical energy. The concept of FACTS was first proposed in 1988 by Hingorani. In addition to the advantages of fast and reliable switching, the range of semiconductor power devices provides opportunities to value electrical energy ...
Dissertation for receiving a master's degree in the field of electrical power, power systems trend. Abstract: Reactive power compensation has always been one of the important research topics in most universities and research centers. Meanwhile, the new generation of compensators (FACTS) has been the focus of the power industry and research centers in order to control reactive ...
Dissertation for the M.Sc. In the field of electrical engineering, power electronics, abstract: The material that is analyzed in this thesis in order to simulate and implement the buck converter nonlinear controller is presented in four chapters. In general, the buck converter and the relationships governing it and the studies conducted on the buck converter and a control method ...
Dissertation for receiving the master's degree ""M.Sc."" Trend: The power of the series active filter is designed for harmonic separation and load voltage regulation in non-linear loads of single-phase and three-phase harmonic voltage source type. A new method for extracting harmonics of load voltage is proposed under the name of absolute value method, which is applied to the ...
Master's thesis in the field of electrical power Abstract: Pulsed power is the accumulation of energy after a relatively long period of time and the release of energy very quickly. This process is to increase the instantaneous power of the system. The characteristic of this pulse includes the voltage level and rise time based on the load requirements. Improvement of efficiency ...
Master's Degree Thesis Abstract With the advancement of technology, the need to use new materials is felt. New methods have been developed to make new materials. Among the new materials in progress, we can mention double-layer sheets. These materials have composite properties of composite materials. The purpose of this research is to produce a double-layer sheet of 304L ...
Master's Thesis in Mechanical Engineering (Energy Conversion) Abstract Numerical investigation of the effect of microstructures on heat transfer and fluid mixing in microchannels, the need for high heat transfer from electronic packages and optical systems, etc., has created a challenge in the field of thermal management. In this context, microchannel heat wells play a great ...
Dissertation for receiving the master's degree ""M.Sc"" in the field of power electrical engineering Abstract Inverters can produce single-phase and three-phase ac voltages from a constant or variable dc voltage. There are various methods to control the output voltage of the inverter, which is introduced in this thesis from an inverter system with solar panel input. In this ...