Download more than 49 examples of thesis, proposal and project topics about molar teeth in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Dissertation for receiving a doctorate degree in dentistry Summary: Introduction and purpose: It is important to evaluate occlusion in the period of milk teeth in order to recognize and correct occlusal problems during the development of teeth and to have a normal occlusion in adulthood. Because in children, occlusion examination, especially in the area of ??milk molars, ...
Dissertation for receiving the degree of Doctor of Dentistry Abstract Introduction Considering the importance of milk teeth in creating an ideal occlusion, it is essential to preserve and maintain them due to caries. One of the methods of restoring milk teeth is the use of stainless steel veneers. Maintaining the health of the tissue that supports the teeth is one of the ...
Dissertation for obtaining a doctorate degree in dentistry. Introduction Removing large amounts of dental tissue weakens the restored tooth. The type of restoration and composite method can be one of the influencing factors on tooth fracture resistance under occlusal forces. The purpose of this study was to investigate the effect of using new low-shrinkage composites on the ...
Dissertation for general doctor degree in dentistry Abstract Introduction: One of the common problems after the surgery of the latent third molar tooth is the development of periodontal problems, which manifests itself in the form of a pocket in the distal second molar tooth, loss of connections and lack of adequate bone formation. To solve this problem, various methods such as ...
Dissertation for receiving the degree of Doctor of Dentistry, Dental Materials Research Center Abstract Objective: One of the objectives of this study was to investigate the fracture resistance of the teeth coated with various crown and root restorations. Materials and methods: 60 freshly extracted human premolar teeth were selected and randomly divided into five groups of ...
Dissertation for obtaining a professional doctorate degree in dentistry Abstract Introduction: One of the common causes of non-surgical root canal treatment failure is the inability to effectively treat all root canals due to the complex anatomy of the root canal system. Due to the fact that so far no comprehensive and extensive study has been conducted on the anatomy of the ...
Dissertation to receive the degree of Doctor of Dentistry Abstract Introduction: One of the best methods for reconstructing bone defects in the mouth and teeth of patients is the use of autogenous grafting, which is still considered as the gold standard for augmentation of bone deficient areas. There are numerous intraoral areas for the removal of this bone graft, the maxillary ...
Dissertation to receive a general doctorate, abstract, introduction and purpose, among the banding problems in orthodontics, is the creation of decalcified areas around the bands. On the other hand, during the treatment, the bands are prone to loosening and the cement used must have sufficient strength. Recently, new compounds containing amorphous calcium phosphate (ACP) have ...
Abstract: Introduction: One of the main goals of treating periodontal diseases is to preserve the alveolar bone in order to continue the survival of the tooth. There is a suspicion that if the activity of osteoblast cells is stimulated and the osteoclastic activity of bone cells is prevented during the treatment process, the bone structure can be rebuilt. The positive effect of ...
Dissertation for Doctorate Degree in Dentistry Abstract The purpose of this study was to compare the microleakage of adhesive total etch and self etch using three methods of Fluid filtration, dye penetration and dye extraction, as well as to determine the statistical relationship between these three methods. Materials and methods In this laboratory study, 72 extracted human ...
Dissertation for Master's Degree in Artificial Intelligence Abstract One of the most complex tasks in digital image processing is image segmentation. Due to increasing attention to this technique by researchers and turning it into a vital role, it is used in many practical fields such as medical applications. Today, in modern dentistry, techniques based on the use of computers, ...
Dissertation to receive a specialized doctorate degree in dentistry in the field of pediatrics Abstract History and Purpose Traumatic dental injuries are considered one of the most common events in childhood and adolescence. Among these injuries, ovalgen (falling out of the tooth from the socket) is considered a real emergency and requires quick and accurate treatment by a ...
The thesis of the Master's course (business orientation) has an abstract of management closely related to anthropology and human cognition, which is presented differently in the two schools of Islam and liberalism. The thinking of material anthropology in the school of liberalism has caused man today to face the expansion of the spirit of consumerism and the production of needs ...
Master's Thesis of Social Communication Sciences The abstract of the present research was compiled with the aim of representing foreign cultural values ??in the environmental advertisements of Tehran. In this research, we were looking for answers to these questions, whether the environmental advertising of Tehran presents and advertises foreign cultural values ??or not, and if ...
Master's thesis in the field of computer engineering (artificial intelligence) abstract of various image processing techniques are widely used in the field of dentistry. Among these applications, we can mention the identification based on dental images, the detection of dental caries, as well as the identification and examination of dental lesions, which mainly occur around the ...
Dissertation for Master's Degree in Computer Science Abstract Nowadays, in many fields, we need devices that can identify people's computers and recognize them based on their body characteristics. Face recognition system as a biometric system is basically a pattern recognition system that recognizes a person based on the vector of specific physiological characteristics or ...
Master's Thesis Abstract One of the issues that makes speech catchy and makes it solid and elegant is the proper use of rhetorical figures. A knowledgeable theologian, by mastering the prevailing environmental conditions and using different forms and diversity in speech, tries to express his words in a way that has the greatest effect on the audience. Among the issues that are ...
Dissertation for M.Sc degree, field: chemical engineering, orientation: biotechnology, research method: first, the surface of the gold electrode was coated with nickel and cobalt salt in suitable conditions, then the standard solution of atrazine poison was placed in contact with the modified electrode, and after optimizing a series of mechanical and chemical parameters, its ...
Master's Thesis in the field of Chemical Engineering Abstract Investigation of parameters affecting the production of alumina gel by sol-gel method Sol-gel method is one of the common methods that is widely used to produce different nanoparticles. In this method, a solution of initiators is mixed with water in the presence of a catalyst, and hydrolysis and polymerization ...
Master's thesis in the field of chemical nanoengineering Abstract The synthesis of silicon dioxide nanoparticles from silicon oil waste using the synthesis method of silicon dioxide nanoparticles [1] has many industrial applications. The industrial use of these particles in traditional fields as well as new fields is expanding, for which new applications are continuously found. ...
Dissertation of the Ph.D course in Chemical Engineering, Biotechnology, Abstract: Clostridium Langali is a highly anaerobic estogenic bacterium that can grow on synthesis gas components, i.e. CO and H2/CO2, and convert them into ethanol and acetate at ambient temperature and pressure. During this process, the bacterium shows a complex metabolic pathway that includes both ...
Dissertation for Master of Chemical Engineering Abstract: In this research, it is attempted to solve one of the major problems in the field of drug production, i.e. improving the solubility of drug particles in body fluids[1] by using the process of solvent/anti-solvent precipitation and nano-scale sediment production in a ?-shaped microchannel, the effect of surfactant ...
Dissertation to receive a master's degree in neonatal special care Abstract Title: Investigating the relationship between the knowledge and performance of nurses working in neonatal wards in the field of venipuncture in hospitals affiliated to Tabriz University of Medical Sciences in 2013 Introduction: Venipuncture is the most important therapeutic procedure among hospitalized ...
Abstract Introduction: One of the most common types of fractures in the jaw and face area is the fractures of the middle area of ??the face and cheekbones, in which the anterior wall of the sinus is involved in the majority of these fractures. Following the fracture of the front wall of the sinus, soft tissue prolapse, sinusitis, rhinitis, pain and tenderness can occur when ...
Dissertation to receive a specialized doctorate degree in the field of oral diseases Abstract: Mucositis or inflammation of the mucous membrane is one of the early side effects of radiation therapy, which can cause ulcers in the oral mucosa and sometimes the inability to eat despite common treatments. Therefore, the use of compounds with a pleasant and acceptable smell and ...
Thesis presented as part of the academic activities required to obtain a Ph.D degree in physical education and sports science, sports biomechanics. Abstract: The purpose of this study is to investigate and compare the electromyographic activity of selected shoulder girdle muscles and scapulohumeral rhythm of handball players, tennis players, swimmers and non-athletes during arm ...
Doctoral Dissertation in Chemical Engineering Abstract With the increase in population, the need for energy resources for mankind has also increased. Diesel, as an effective fuel, fulfills the need for transportation fuel in the world. Biodiesel, which is considered a renewable fuel and produces less harmful environmental effects, is produced from various sources, among which ...
Dissertation to receive a master's degree in the field of chemical engineering, thermokinetic orientation. Abstract With the increase in the use of fuel cells in the industry and as an on-site application, there is a need to develop production units on the site of hydrogen. In this research, a monolithic catalytic reformer in which autothermal reforming of methane takes place is ...
Dissertation for Master's degree (M.A) specialization: ""Insurance Management"" Abstract of the thesis (including summary, objectives, implementation methods and results obtained): Due to the very poor coverage of basic treatment in the dental insurance sector, such services are considered as luxury services for people and the health indicators of oral and dental health in Iran ...
Dissertation for receiving the degree of Doctor of Dentistry Abstract The long-term clinical success of implants is dependent on osseointegration and adhesion of soft tissues and epithelium to implant surfaces. Various indices including: plaque index, gingival index, bleeding during probing and bone resorption are used to evaluate the health of the soft tissues around the ...
Dissertation for M.A. degree. ""Trend of Biotechnology"" Abstract Today, due to the reduction of fossil fuel sources and the destructive effects of these types of fuels on the environment, researchers are thinking of replacing them. In recent years, biodiesel fuel is considered the most suitable alternative to diesel fuel due to its renewable nature and less pollution. The ...
Master's thesis in the field of chemical engineering without major. Abstract: Modeling, simulation and optimization of Jam Petrochemical Check Bed Reactor for hydrogenation of 1 and 3-butadiene. Therefore, a suitable kinetic model has been selected as a basic structure for modeling the reactor, and after that the presented model has been developed in order to match the molar ...
Dissertation for obtaining a master's degree M. Sc)) Department of Chemistry - Green Synthesis of Organic Chemistry 2-phenylimidazoles boiled using ionic liquid. Imidazoles are an important group of heterocyclic compounds that have various biological and medicinal activities such as anti-hypertensive, anti-cancer, anti-HIV, anti-bacterial and pain reliever. In this thesis, new ...
Doctoral thesis in the field of chemical engineering. Abstract The study of the effective parameters in the synthesis of silver nanoparticles by the inverse microemulsion method of metallic silver nanoparticles is of interest due to their use as catalysts, antimicrobial agents and biosensors. The practical use of silver nanoparticles is highly dependent on the size distribution ...
Master's Thesis of Chemical Engineering-Biotechnology Abstract Lipase is a carboxylic ester hydrolase enzyme that acts on triacylglycerol to release fatty acids, glycerides and glycerol. The discovery of the ability of lipase to catalyze the esterification reaction started a broad chapter in the field of this enzyme's functions. In this study, with the knowledge of the ability ...
Chemical Engineering Master's Thesis Abstract: In this research, a method for the synthesis of ZSM-5 nanozeolite was presented. Then this nanozeolite was modified with CTAB surfactant and its characteristics were investigated using XRD, FT-IR, and SEM methods. This nanozeolite was used to prepare a modified carbon paste electrode (SMNZ/CPE) to measure sulfate anion. Also, the ...
Dissertation for Master's Degree in Advanced Chemical Engineering Abstract A new method based on point cloud extraction to extract uranium from water samples and its measurement using alpha spectrometry based on liquid scintillation has been investigated. Uranium extraction from water samples in the presence of a number of available surfactants and chelating reagents has been ...
Dissertation for Master's Degree in Chemical Engineering Abstract According to reports, heterogeneous photocatalysts are suitable for photodegradation of polluting compounds. Many semiconducting metal oxides such as: TiO2, SnO2, ZnO2, etc. can be used as photocatalysts in water splitting reactions, synthesis of organic compounds and removal of wastewater pollution. synthesized ...
Dissertation to obtain a doctorate degree in general dentistry. Findings: The vertical changes of the soft tissue in all the measured points were lower in the test group compared to the control group, and this difference was not significant only in the midbuccal region, but it is significant in other places. The horizontal dimensional changes of the soft tissue were also less at ...
Master's thesis in the field of chemistry, mineral orientation Abstract: Synthesis and identification of the symmetric bis((E)-2-nitrophenylallylidene)-2 and 2-dimethyl-1,3-diamine propane ligands with the general formula MLX2, where M represents zinc (II), cadmium (II) and mercury (II) metals and X includes chloride, bromide, iodide, It is thiocyanate and azide, it was done. To ...
Master's Thesis of the Department of Medical Biotechnology Persian Summary Cancer has been made as the second cause of death after heart diseases, one of the most important oncogene proteins is TREKB, whose specific ligand is BDNF (Brain derived neutrophilic factor), and overexpression of this receptor has been observed in prostate, multiple myeloma, ovarian and thyroid cancers. ...
Dissertation for receiving a master's degree in the field of food science and engineering, specialization: food science and industry. Abstract Considering the various uses of vegetables in human nutrition, as well as their taste and usefulness in maintaining health and well-being, their importance is increasing day by day. Considering the short life after harvesting and ...
Dissertation for obtaining a doctorate degree in dentistry Abstract: Introduction and purpose: One of the most important occupational tensions that dentists may face in their profession is patient complaints. The purpose of this study is to present a picture of dental malpractices in Mashhad. Materials and methods: The file of complaints received by the Mashhad Medical System ...
Dissertation to receive a doctorate degree in general dentistry Abstract Background and purpose Salivary gland tumors have a relatively low prevalence and constitute about 3% to 10% of head and neck neoplasms. Considering the lack of epidemiological research about these tumors in Mashhad Dental School; The present study was conducted with the aim of determining the ...
) Master's Thesis in Microbiology Abstract: Considering the expansion of the use of leeches for therapeutic purposes and since the Food and Drug Administration approved that the use of leeches after surgery can lead to bacterial infection. FDA In this study, independent culture and dependent culture will be used to know the specific signs of gastrointestinal tract microbes in ...
Dissertation for Master's Degree in Animal and Poultry Nutrition Abstract This research was conducted in order to investigate the effect of different levels of savory essential oil, including levels (0 mg, 200 mg, 400 mg) and type of grain (maize and barley) on the process of rumen fermentation, animal performance and some blood parameters of goats native to West Azerbaijan. In ...
Master's thesis in the field of agricultural engineering - horticultural sciences, specialization: ornamental plants. Abstract In order to investigate the effect of sodium nitroprusside on the flowering life of rose, sunflower and lisianthus cut flowers, a study was conducted in the form of a factorial experiment based on a completely randomized design with two sodium ...
Dissertation for receiving a Master's degree (M.Sc) major: food chemistry Summary Persian Iran is the main habitat of walnuts. Iranian walnut is an economically important species and has a lot of nutritional value. In this research, random walnut samples were collected from 100 walnut trees in two areas of Baghstan located in Tehran province and Erengeh located in Alborz ...
To obtain a master's degree in mechanical engineering - manufacturing and production Abstract Fuel cells are electrochemical devices that are used to directly convert fuel into electrical energy. One of the most important types of fuel cells is the polymer fuel cell, which is widely used. In general, two types of optimization can be done in the polymer fuel cell: optimization in ...