Download more than 100 examples of thesis, proposal and project topics about modulus of elasticity in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Civil Engineering Master's Thesis - Soil and Foundation Mechanics Abstract From the past until now, one of the most economical methods to improve the mechanical properties of clay soils has been stabilization by means of additives such as lime and cement in construction projects such as road construction and consolidation of building foundations. Also, with the passage of time ...
Dissertation for Master's Degree in Civil Engineering – Shahrivar Marine Structures, September 1992 Abstract: Pipe-in-pipe systems are widely used in transmission line applications.
Dissertation for Master's Degree in Civil Engineering - Structures Abstract: One of the important problems in seismic design and implementation of buildings is the significant dead weight used in it. Therefore, in the case of using lightweight concrete that has favorable mechanical properties, significant benefits can be obtained, including a reduction in dead load and ...
Dissertation for Master's Degree > Direction: Hydraulic Structures Abstract: One of the assumptions that is made to simplify the dynamic analysis of the existing weighted concrete dams is the uniformity of the foundation in terms of physical parameters such as modulus of elasticity and damping. This is despite the fact that, in practice, different geological conditions may ...
Master's Thesis (M.sc) Civil Engineering, Soil and Foundation Mechanics Abstract In this research, the stability of soil reinforced with geogrid located on an underground cavity was analyzed using plaxis software, and the effect of several factors such as the number of geogrid layers, the length of the geogrid layer, the stiffness of the geogrid layer, the optimal location of ...
Master's thesis in the field of civil engineering, structure orientation. Abstract: In this study, the effect of some effective parameters on the strength of polymer concrete based on epoxy resin, including hardener, filler, and solvent, has been investigated. Rice husk ash and broom stalk ash were used as fillers and acetone-toluene mixture with a ratio of 50-50% was used as a ...
Dissertation for master's degree in the field of civil engineering, road and transportation, the abstract of asphalt failures is one of the problems that are the concern of road and transportation engineers today, and every year huge costs are spent on the maintenance and repair of asphalt roads. Many efforts have been made to increase the strength and life of asphalt, among ...
Dissertation for Master's degree (M.S) Chapter 1 History of dynamic analysis of liquid storage tanks and regulatory orders in this regard Abstract The main goal of this research is to investigate the effect of the presence of seismic isolators on the dynamic performance of liquid storage tanks during an earthquake. In this regard, it is necessary to first know the dynamic ...
Dissertation for Master's Degree in Mechatronics Engineering Persian Abstract The purpose of this project is to introduce a new approach for troubleshooting gas transmission pipelines using mechanical waves, which is much cheaper and easier than other methods. who are currently working. These lines are usually located in difficult environmental conditions and far away and in ...
Dissertation for master's degree in civil engineering, structural orientation. Abstract Good bond strength between the old and new concrete surface is a key factor in the performance of concrete repairs. The purpose of this thesis is to investigate and evaluate the bond strength between the surface of the old concrete and the added concrete. In this thesis, a laboratory research ...
Master's Thesis in Civil Engineering (Soil and Foundation) Abstract Dense sand piles have been used since 1950 in Japan and then in other countries of the world as one of the most effective and economical methods in strengthening soil in order to prevent liquefaction, increase bearing capacity and improve soils with different grain sizes. The process of implementing dense sand ...
Master's Thesis in Mechanical Engineering - Applied Design Abstract In recent years, most of the researches have been focused on compressive and combined loading in order to investigate the buckling of nanotube structures, and for this purpose, the work done on tensile loading is very limited. Since the results of compressive and tensile loading in carbon nanotubes are ...
Thesis for the M.Sc degree in wood and paper industry engineering, Mehr 2013 Abstract: In this research, the physical and mechanical properties of nanocomposites obtained from cellulose nanofibers and poly polymers
March 2013 Field: Economics Orientation: Economic Sciences Abstract: In the highly competitive environment of the food industry, the preservation and development of the market is the result of the brand's performance. Therefore, identifying the effect of the brand on the sales performance of ingredients.
Dissertation for receiving a master's degree in chemical engineering, advanced orientation. Abstract The limitation of heat transfer fluids in various industries due to their poor thermal conductivity has caused the improvement of the heat transfer of working fluids to be considered as a new method of advanced heat transfer. So that the idea of ??dispersing solid particles in ...
Dissertation for Master's Degree in Chemistry, Chemistry, Abstract: Epoxy resins, which are thermosetting polymers, have properties such as high thermal stability, good adhesion, high chemical resistance, easy molding, and moisture resistance. These resins are used as adhesives, coatings, paints and polymer tools. The most common epoxy resin is prepared from the reaction of ...
Dissertation of master's degree in civil-structural engineering Abstract: Divergent bracing frames are considered earthquake-resistant systems for steel structures. These braces are from my difficulty
Dissertation of master's degree in structural engineering, February 2011 Abstract: In the optimal civil engineering structure construction for static loadings have been significantly developed. But, in
Master's Thesis of Ardakan Faculty of Art and Architecture, Carpet Department (Primary Materials and Dyeing) Mehr 2013 Abstract: During the period of its use, the hand-woven carpet may be affected by various factors and conditions
(Strength – Orientation) Economics-Economics, January 2013 Abstract The revenues from the sale of oil have a significant share in the government's income and the government's gross domestic product in Iran. On the one hand, due to the importance of the industrial sector
Master's thesis in economics abstract: One of the most important factors affecting the trade of every country and every economic sector, for what has been proposed in economic theories, is the exchange rate and the national income of countries.
Abstract Adopting a suitable currency regime and equilibrium exchange rate is one of the important and sometimes controversial issues. Some economists believe that the low nominal (or real) exchange rate causes export stagnation and reduced incentives for domestic production to replace imports. Others believe that the policy of devaluation of the national currency or high ...
Dissertation for the master's degree in the field of executive management, strategic orientation, abstract of the traditional approaches of urban management in Iran has created a confrontational atmosphere instead of an interactive atmosphere between citizens and municipalities, which good urban governance is one of the ways to deal with it. The purpose of this research is to ...
Dissertation for Master's degree (M.A) specialization: ""Insurance Management"" Introduction Life insurance is considered a financial tool. Life insurance is responsible for providing financial support and coverage to a family that has lost its breadwinner (insured) as a result of death. Today, life insurance is one of the most important fields of activity in the insurance ...
This study uses the Translog cost function to estimate the cost efficiency levels of private banks operating in Iran. Also, these productivity levels are analyzed under Kamels' indicators in order to provide a partial understanding of their financial situation to justify their current position. The results of the research findings of this study by applying it to the Translog ...
Thesis for obtaining a master's degree in the field: business management, specialization: insurance management. Abstract: One of the risks facing mankind is a disease that imposes a lot of medical expenses on patients. The risk of illness can be compensated through medical insurance. The purpose of the present study is to estimate the demand function of complementary health ...
Dissertation for Master's Degree in Executive Management Abstract: The purpose of this research was to determine the factors affecting housing prices in Bandar Abbas. The statistical community in this research includes all the experts of the housing foundation organization in Bandar Abbas city. Sampling was done by cluster method and among the experts in the subordinate offices ...
Dissertation for receiving a master's degree in the field of civil engineering with a focus on soil and foundation. Abstract: The compressibility behavior of soils has become an important concern in geotechnical engineering. As buildings, embankments and roads are implemented, significant settlements often occur. Since long-term settlements occur due to creep, therefore, the ...
Dissertation for the master's degree in the field of executive management, marketing orientation. The abstract of this research deals with ""investigating the impact of price flexibility on the buying behavior of online customers"". The present research is practical in terms of purpose and the research method is descriptive and survey type. It asks for people's views and ...
In order to receive a master's degree in textile technology, it is essential to know the physical and mechanical properties of carpets to produce a quality product and maintain the proper appearance. In this research, an attempt has been made to provide a model to determine the relationship between the different parameters of these characteristics, therefore, to measure these ...
Dissertation of Master's Degree in Civil Engineering - Structure Abstract In metal structures, one of the most important places of stress concentration is the joint. In form cutting, the shear force at the connection point is so high that a part of the beam or its reinforcement is broken and separated in pieces, and this is due to negligence in the design of the connection or ...
Civil Engineering Master's Thesis, Soil and Foundation Engineering Abstract In this thesis, in order to analyze the behavior of surface foundations based on reinforced soil, a simple physical method based on the resistance of materials called ""cone method"" is used, which is actually used as an alternative to the exact solution methods that are based on the three-dimensional ...
Introduction In today's era, the presence of waste materials resulting from various physical and chemical processes is one of the important problems of industrialized and developing countries. So that extensive research is being carried out for methods of recycling or disposing of them to minimize the damage to the environment. In this regard, construction researchers, like ...
Master's Thesis in the field of industrial management - production trend Abstract Among the topics that have long been faced by the decision makers and policy makers of the electricity industry in many countries of the world, the thinking of restructuring this industry is in accordance with the process of increasing efficiency and competition in other industries. Iran's ...
Dissertation for master's degree in electrical field, orientation: power. Abstract The concept of microgrid is a set of loads, sources of production and energy storage that act as a controllable load or generator and can provide power and heat for a local area. Management of production power in microgrid is one of the main current topics in the design and operation of microgrid. ...
Thesis for master's degree in the field: chemical engineering Abstract Hard polyurethane[1] is always considered one of the most effective and practical polymers in various industries, especially the coating industry. Excellent adhesive property, curing ability at ambient temperature and corrosion resistance of this polymer are some of its remarkable features. This study was ...
Master's thesis in the field of polymerization engineering, abstract was determined by using experimental design methods to determine the optimal feed recipe for the preparation of nitrile rubber. Initially, to determine the factors affecting the rate of polymerization, screening tests were designed according to the Plate-Boorman method, which examines a large number of factors ...
Mechanical Engineering Master's Thesis Proposed Design - Introduction The use of fibers in concrete started about 50 years ago and day by day their use in various fields has increased. Adding fibers to the mixing design improves the mechanical properties of concrete and the behavior of the structure after cracking. It also increases the softness and malleability of the section. ...
Dissertation for Master's Degree in Mechanical Engineering, Energy Conversion, Abstract Most of the time, initial information and boundary conditions are not precisely defined and cause errors in the output of the problem. These initial values ??can be obtained through experiments and statistical methods. It is often not possible to study individual members of the society due to ...
Dissertation for Master's Degree in Mechanical Engineering (Applied Design) Abstract In this research, the analysis of vibrations, buckling and wave propagation of wrapped nano beam under axial load on Pasternak substrate is discussed. First, the displacement and displacement field of the wrapped beam is obtained. Then, using the obtained displacement field, strain-displacement ...
Dissertation for receiving a master's degree in the field of preservation and modification. Abstract In this research, the effect of combined modification of colloidal silver-hot water on the heat transfer from the hot press plates to the heart of the beech (Fagus orientalis) chipboard cake, the physical and mechanical properties of the chipboard and the chemical changes of the ...
Master's Thesis of Polymer Industry Engineering Abstract Phenolic resins have excellent dimensional, thermal, chemical and corrosion resistance. Also, the fugitives produced during the thermal degradation of this resin have low toxicity and, in addition, they have high charring. Phenolic resins, due to having desirable properties, are used in many fields such as internal parts ...
Master's Thesis of Mechanical Engineering-Applied Design Abstract In many applications, graphene (monolayer or multilayer) is used in the polymer matrix as a composite. In this research, ideal graphene with a hexagonal bond shape between atoms, located in a polymer matrix, with different boundary conditions, including gripped and simple, under biaxial external compressive ...
The thesis for obtaining a master's degree in the field of mechanics, investigating and analyzing the free and forced vibrations of a multi-walled carbon nanotube placed in an elastic medium in order to achieve a clear mathematical understanding of the behavior of different walls of the nanotube under the influence of van der Waals forces and the elastic medium is one of the ...
Dissertation for M.Sc) in the field of mechanics in the field of construction and production. Abstract In the present research, the design and construction of the ECAR machine in order to investigate the effects of the process on carbon steel sheets was our goal. The desired research was carried out in the research workshop of Islamic Azad University, Jaseb branch. After the ...
A master's thesis in the field of mechanics, applied design, abstract. These two characteristics are caused by phase transformations under different thermodynamic loadings. Depending on these two mentioned features, memory alloys can be used as actuators in different forms. These structures can be used in different fields such as medicine, aerospace, knowledge
Dissertation to receive a specialized doctorate degree in dentistry in the field of pediatrics Abstract History and Purpose Traumatic dental injuries are considered one of the most common events in childhood and adolescence. Among these injuries, ovalgen (falling out of the tooth from the socket) is considered a real emergency and requires quick and accurate treatment by a ...
Master's Thesis of Food Science and Industry Abstract The purpose of this research was to evaluate the effect of adding capcarrageenan and sodium alginate on the quality characteristics of soy burger during storage time of 60 days at -20°C. For this purpose, cooking characteristics, sensory characteristics, pH, tissue profile analysis were investigated every 30 days. The ...
Master's Thesis in Mechanical Engineering-Applied Design Abstract In this thesis, classical sheet theories, first-order shear deformation theory and refined two-variable theory for the free vibration problem are investigated using standard finite element and hierarchical finite element methods. The refined two-variable theory is an equivalent single-layer theory, in which two ...
Master's Thesis in Food Science and Technology (M.Sc) Major: Food Engineering Abstract In this research, the effect of zadu and CHO gums at 5 levels of 0, 0.1, 0.2, 0.28 and 0.4 percent and gum arabic and xanthan gum at levels of 0, 0.5, 0.9, 1.4, 1.8 and 0.08, respectively. 0.1, 0.15 and 0.2% on the stability, rheological and sensory properties of buttermilk during 59 days of ...
Dissertation for Master's Degree in Rock Mechanics Abstract: Rock mass blasting ability is a very important feature in explosive designs in mines and construction activities, which is closely related to rock mass system, environmental conditions and blasting system. Among the factors affecting the explosiveness, there are controllable ones, and there are some that are ...
Dissertation for Master's Degree in Mining Engineering - Rock Mechanics Abstract Today, blasting operations in hard rock piles is an inevitable thing in many mining and construction projects, and in case of inaccuracy in its design, it can cause great loss of life and money to all construction or mining projects. When an explosion takes place in two different rock masses with ...
Dissertation for Master's Degree in Rock Mechanics Abstract The unexpected stress intensity factor of some engineering structures has caused a lot of financial and collateral damage. In investigating the causes of failure, researchers gradually found that the design of many of these structures was correct based on the theory of elasticity and resistance of materials, and the ...
Master's Thesis Applied Design Abstract In this thesis, in the field of vacuum technology, the importance, application and role of this technology in the industry and the advancement of scientific research, technical terms related to this technology, types of vacuum pumps, applications, advantages and disadvantages of each of the vacuum pumps, the importance of studying the ...
Master's Thesis in Mechanical Engineering (Applied Design) Abstract of three-dimensional interlayer stress investigation in mechanical connections in layered composite materials The purpose of this thesis is to investigate three-dimensional interlayer stresses in mechanical connections in layered composite materials. For this purpose, finite element method and ABAQUS software ...
Dissertation for M.Sc degree, specialization: manufacturing and production, abstract in this thesis, how to improve the properties of plastics with the help of heat treatment. First, we will talk briefly about polymers, plastics and their sub-branches and heat treatment on them, and then we will discuss the effect of annealing heat treatment on heavy polyethylene sheets that are ...
Abstract The main purpose of the research is to investigate the relationship between business strategy and profit quality in companies admitted to the Tehran Stock Exchange market. The statistical sample of the research includes 145 companies accepted in Bo
Abstract The main purpose of the research is to investigate the relationship between business strategy and profit quality in companies admitted to the Tehran Stock Exchange market. The statistical sample of the research includes 145 accepted companies
Dissertation for receiving the master's degree ""M.A."" Management Shahrivar 1390 Abstract The aim of the research is to investigate the effect of establishing the proposal system on the efficiency of Merck's professional response system
Dissertation for obtaining a master's degree (M.A) Business Management - Marketing Orientation Summer 2019 Abstract Considering the ever-increasing speed of changes and competition in the economic world, managers should have
Thesis for obtaining the master's degree (M.A.) (Trend: Human Resource Management Winter 1391 Abstract: Naza University
Master's Thesis in Accounting (M.A.) The disclosure of information is different in different companies. What is discussed in this research is profit prediction. Profit forecasting in Iran is done by managers. Considering the role that managers have in profit forecasting, in this research, the relationship between the manager's ability and the timing of the forecast disclosure, ...
Dissertation for receiving a master's degree, specialization: accounting, is an abstract of the present research and research work in order to determine the effective factors in the selection of accounting methods for the inventory of materials and goods and its effect on the quality of profitability of companies admitted to the stock exchange. This thesis prepares a framework ...
Dissertation for master's degree in accounting, accounting major. Abstract: The present research was conducted in order to provide evidence regarding the effect of ""privatization"" on the quality of profit of companies admitted to the Tehran Stock Exchange. The spatial domain of this research is Tehran Stock Exchange and its temporal domain is 1382 to 1392. In order to test the ...
Master's thesis in accounting, the present research was done to provide evidence to clarify the relationship between the quality of profit and the liquidity of stocks, as well as to evaluate the impact of the quality of profit on the liquidity of stocks. In this research, 96 companies admitted to the Tehran Stock Exchange in the 5-year period of 1387-1392 (with one year in ...
Chapter 1 1-1-Introduction: Common fluids such as water, oils and ethylene glycol, which are usually used as heat transfer media, have a limited ability in terms of thermal properties, which is the first obstacle to compress and increase the efficiency of heat exchangers. One of the ways to improve heat transfer is to add particles to the fluid. This method is used for fluids ...
Master's Thesis in Accounting (M.A) Abstract In this research, the relationship between the joint board of directors, discretionary disclosures and profit quality in 57 companies admitted to the Tehran Stock Exchange from the beginning of 2015 to the end of 2010 is examined. In this research, stock volatility, joint management board and independent director are considered as ...
Abstract: In this study, the relationship between ownership concentration, company performance and dividend policy in companies listed in the food and pharmaceutical industries of the Tehran Stock Exchange has been examined. The statistical sample of the research includes 44 companies during the period of 1380 to 1387. The chosen approach for hypothesis testing is the ...
Thesis for receiving a master's degree in the field of educational management in the field of educational sciences. Abstract: The problem of many companies and educational centers today is the problem of human resources and the lack of proper efficiency of these forces in organizations. This research has been prepared for all industries, companies, organizations and educational ...
Dissertation for receiving a master's degree in the field of industrial engineering, Shahrivar's industrial trend. 2013 Abstract: Many economists consider agriculture as the driving force of economic growth.
Dissertation for master's degree in accounting research abstract: The purpose of financial reporting is to provide appropriate information for decision making by the users of financial information. Financial reporting may take the form of financial statements or other information transfer tools. Much of the information provided by financial reporting is based on predictions ...
Dissertation for Master's degree (M.Sc) Major: Accounting Abstract The main purpose of this research is to examine the relationship between stock liquidity and real profit management of companies listed on the Tehran Stock Exchange. The statistical population of the present research is the companies admitted to the Tehran Stock Exchange during the years 1382 to 1391, and the ...
Dissertation for Master's Degree in Accounting Abstract The purpose of this research is to re-explain the relationship between dividends and re-presentation of financial statements as a measure of profit quality. Specifically, this research focuses on conditions that can classify management's motivation in using accruals into two fraudulent and non-fraudulent groups. In this ...
Dissertation to receive master's degree in accounting. Abstract In the conditions of the realism of the presented financial statements, the profit based on the accrual accounting system should be able to reflect valuable information about the current situation and future prospects of the company to the market. In this case, the profit may reflect the personal interests of the ...
Master's Thesis in Clinical Psychology (M.Sc) Abstract Reading is the most basic learning tool for students. Dyslexia accounts for the largest percentage of learning disabled students, which is defined by the lack of success in language skills such as reading, writing and spelling. Memory, especially active memory, is one of the important factors in learning that these students ...
Master's thesis in the field of philosophy of education Abstract Study of professional ethics from the point of view of secondary school counselors The purpose of this research is to investigate the study of professional ethics from the point of view of secondary school counselors. This research was conducted in a qualitative paradigm using the dominant-less dominant model. In ...
Master's Thesis in Clinical Psychology Abstract: Objective: Social anxiety is a very debilitating disorder that can disrupt many aspects of a person's life. In this research, the researcher seeks treatment using neurofeedback methods and the presence of mind as new treatments in the field of psychology. Method: The design of this research is quasi-experimental with pre-test and ...
Dissertation for receiving the master's degree ""M.A."" Accounting - Abstract accounting is a main factor of successful investment, management's ability to predict the efficiency of projects; Because forecasting plays a major role in investment evaluation methods. Therefore, corporate investment decisions require managers to predict expected cash flows from potential ...