Download more than 100 examples of thesis, proposal and project topics about metal oxide nanoparticles in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Master's thesis in the field of chemical nanoengineering Abstract The synthesis of silicon dioxide nanoparticles from silicon oil waste using the synthesis method of silicon dioxide nanoparticles [1] has many industrial applications. The industrial use of these particles in traditional fields as well as new fields is expanding, for which new applications are continuously found. ...
Dissertation for obtaining a master's degree in chemistry, fluoride has been known as a toxic ion for many years. The main source of fluoride in aqueous solutions is minerals containing fluoride and the industrial activities of factories. According to the report of the Environmental Protection Organization, the amount of fluoride more than 1 mg/liter causes various diseases. In ...
Doctoral thesis in the field of chemical engineering. Abstract The study of the effective parameters in the synthesis of silver nanoparticles by the inverse microemulsion method of metallic silver nanoparticles is of interest due to their use as catalysts, antimicrobial agents and biosensors. The practical use of silver nanoparticles is highly dependent on the size distribution ...
Master's Thesis of Polymer Industry Engineering Abstract With the progress of human civilization, technology development and the ever-increasing population, the world is currently facing a problem called pollution that threatens the lives of the inhabitants of the earth. Pollution caused by the accumulation of persistent toxic compounds in soil and water, such as chemicals, ...
Master's Thesis on Energy Conversion Abstract: Increasing heat transfer as well as increasing the efficiency of energy storage systems due to the limitation of natural resources and with the aim of reducing costs has always been one of the most basic concerns of engineers and researchers. This is especially important in fluids due to the small thermal conductivity coefficient. ...
Chapter 1 1-1-Introduction: Common fluids such as water, oils and ethylene glycol, which are usually used as heat transfer media, have a limited ability in terms of thermal properties, which is the first obstacle to compress and increase the efficiency of heat exchangers. One of the ways to improve heat transfer is to add particles to the fluid. This method is used for fluids ...
To receive a master's degree in textile technology engineering. Abstract In the previous research, multi-sized nano-roughness was developed using nanoparticles with different sizes and different surface charges along with silicone resin coating to produce multi-purpose textiles with stable properties. In this research, the idea of ??using laser irradiation and finishing textiles ...
Master's Thesis in the field of Chemical Engineering Abstract Investigation of parameters affecting the production of alumina gel by sol-gel method Sol-gel method is one of the common methods that is widely used to produce different nanoparticles. In this method, a solution of initiators is mixed with water in the presence of a catalyst, and hydrolysis and polymerization ...
Dissertation for M.S.c Master's Degree Orientation: Applied Abstract: In recent years, semi-conducting nanoparticles have attracted a lot of attention due to their electrical and mechanical properties, which result from limited quantum effects compared to their counterpart materials. Among semiconductor nanoparticles, ZnO nanoparticles have higher efficiency. To achieve higher ...
Master's Thesis, Department of Chemistry, Organic Chemistry, Abstract An effective method for the synthesis of pyrido[3,2-d]pyrimidine derivatives from the three-component condensation of 6-aminouracil, 6-amino2-thiouracil or 6-amino-1,3-dimethyluracil with aryl aldehydes and malononitrile, a class of pyrido[3,2-d]pyrimidine derivatives in the presence of high performance basic ...
Dissertation for receiving a master's degree in chemical engineering, advanced orientation. Abstract The limitation of heat transfer fluids in various industries due to their poor thermal conductivity has caused the improvement of the heat transfer of working fluids to be considered as a new method of advanced heat transfer. So that the idea of ??dispersing solid particles in ...
Dissertation for Master's Degree in Chemical Engineering Abstract According to reports, heterogeneous photocatalysts are suitable for photodegradation of polluting compounds. Many semiconducting metal oxides such as: TiO2, SnO2, ZnO2, etc. can be used as photocatalysts in water splitting reactions, synthesis of organic compounds and removal of wastewater pollution. synthesized ...
Dissertation for Master's Degree (M.Sc) Direction: Applied Chemistry Persian Summary According to international standards, the sulfur in the fuels used in the transportation industry, as one of the most important polluting industries, should be reduced to about 10 ppmw, while many refineries in the world produce fuels with a sulfur content of more than 1000 ppmw. One of the new ...
Abstract: Research in the field of heat transfer of suspensions with nanometer-sized solid particles in the base fluid has started in the last decade. Recent research in the field of nanofluids has shown that the addition of nanoparticles causes a significant increase in the heat transfer of the suspension. Another common way to improve the thermal performance of devices is to ...
Master's Thesis on Energy Conversion Abstract: Increasing heat transfer as well as increasing energy efficiency due to the limitation of natural resources and reducing costs has always been one of the most basic concerns of engineers and researchers. This is especially important in fluids due to the small thermal conductivity coefficient. One of the most important ways to ...
Master's thesis in the field of chemistry, analysis, abstract. In this research, the synthesis of polymer nanoparticles of ion template using sedimentation method and for the separation and preconcentration of nickel ions from aqueous samples is reported. Nickel template polymer nanoparticles by dissolving stoichiometric amount of nickel nitrate and ligand ...
Master's thesis in the field of chemical engineering, abstract of the laboratory study of iron oxide production on a microstructural scale using the precipitation method with supercritical anti-solvent by: One of the problems of cement used in oil wells, which are used to connect wall pipes and well walls, is that these cements do not have the desired resistance against high ...
Master's thesis in the field of mining chemistry Abstract: In this study, the effect of amide substitution on the surface of graphene oxide was studied. Two amines were chosen to change the contact surface and absorption rate. of a linear diamine such as ethylenediamine[1] and cyclic amine 6-aminouracil[2] with two different characteristics were evaluated. After the synthesis ...
Dissertation to receive master's degree in organic chemistry Keywords: Farsi: Besparash, condensation, composite, nanocomposite, anchoring Nitrogen in bonding with metals can destroy them
Petroleum Engineering Master's Thesis Abstract Phosphoric acid is the second most consumed mineral acid in the world and is used as a raw material in the production of detergents, food and pharmaceutical products. In this sense, the purification of phosphoric acid is one of the essential needs of consuming industries. 95% of acid consumed in industries that need pure phosphoric ...
Master's Thesis of Polymer Industrial Engineering Abstract Cross-linked polyethylene is one of the materials that is widely used in the field of insulation production in cables due to having suitable electrical properties and good electrical strength. Nowadays, one of the methods of optimizing the properties and changing the behavior of polymers is the use of filler particles ...
Dissertation for receiving a master's degree in applied chemistry, Persian abstract. In this research, graphite particles were converted to graphene oxide by Hammer's method. Graphene nanoparticles are one of the best and most effective absorbent materials that have been produced so far. Graphene is one of the successful allotropes of carbon in the field of drug absorption and ...
Dissertation for Master's Degree (M.Sc.) Field: Horticulture-Ornamental Plants Abstract To investigate the effect of gap and silver nanoparticles on the life of the flower and the hyphae characteristics of Alstroemeria hybrida cut flowers, a 2-factor factorial experiment based on a completely randomized design with two factors of stem end gap in 2 levels (5 cm gap and no gap) ...
Dissertation for Master's Degree in Agricultural Engineering - Food Science and Technology - Food Technology Abstract Vegetable oil is considered a strategic product in our country. The amount of import of this product in the country is important, and for this reason, the effort to produce crude oil extracted from oilseeds in the country, at the level of competition with its ...
Dissertation for Master's Degree in Mechanical Engineering (Energy Conversion) Abstract In this thesis, the mass and heat transfer of water-aluminum oxide nanofluid in a two-dimensional porous medium under a magnetic field and in the vicinity of a vertical wall has been investigated. The boundary wall can be permeable or impermeable. The concentration and temperature of the wall ...
Dissertation for Master's Degree in Agricultural Engineering (M.Sc) Major: Food Science and Industry Abstract Diazinon is an organophosphorus insecticide and is widely used by farmers. This poison can easily find its way into food and exert its toxic effects on humans. Diazinon poison, like other organophosphorus poisons, inhibits some enzymes, especially acetylcholinesterase. ...
Abstract In recent years, there have been vast advances in the field of image sensors and digital imaging systems, but still theoretical and practical limitations affect the resolution of images taken with these cameras. Super resolution techniques have been developed in recent years to overcome these limitations. These techniques create a higher resolution image by using one or ...
Master's thesis in the field of civil engineering (environmental engineering) is an abstract of the surface absorption method, one of the effective methods for removing metals, including nickel metal. In this research, modified rice paddy has been used as absorbent material. Since this adsorbent is a natural material with a high contact surface, in addition to its high ability ...
Master's Thesis in Civil-Soil Field Abstract Dense clay layers are used as one of the most common impermeable layers in most geotechnical structures such as earthen dams and municipal and radioactive waste disposal centers. Due to special geotechnical characteristics, these layers are damaged by cracking during their lifetime, these cracks increase the permeability of the layer ...
Dissertation for receiving a Master's degree (M.Sc.) specialization: Environment Abstract Gaseous liquids obtained from the refining of sour gases are also sour and contain a large percentage of hydrogen sulfide and mercaptans. Therefore, after distilling and preparing the products, it needs refining processes to remove or reduce the amount of sulfur and mercaptans present. ...
Dissertation for Master's Degree in Chemistry (Applied Chemistry - Polymer) Abstract: Ethylene polymerization was successfully performed in the presence of Phillips catalyst and in the slurry phase. In the continuation of the work, the effect of some effective parameters in polymerization, including the effect of trialkylaluminum, the effect of 1-hexane comonomer, the effect of ...
Dissertation for M.Sc degree, field: chemical engineering, orientation: biotechnology, research method: first, the surface of the gold electrode was coated with nickel and cobalt salt in suitable conditions, then the standard solution of atrazine poison was placed in contact with the modified electrode, and after optimizing a series of mechanical and chemical parameters, its ...
Master's thesis in the field of chemical engineering, abstract of the design of the Driso ring base and the use of hydrocarbon solvent in the dehumidification process in Farashband refinery, water vapor is one of the most important impurities in the flow of natural gas. Usually, the water vapor itself is not a problem, but instead the liquid or solid phase that forms when the ...
Thesis for obtaining a master's degree. Abstract: The increase in environmental concerns and the progress of green chemistry processes have necessitated the replacement of homogeneous catalysts with heterogeneous ones. In this research, activated carbon was used as a suitable substrate due to its special properties. The most important of these properties are resistance in acidic ...
Master's thesis in the field: Chemical Engineering Abstract In this research, a comprehensive two-dimensional model based on the Finite Element Method (FEM) is proposed for modeling gas-solvent membrane contactors to remove carbon dioxide[1] from synthesis gas. Aqueous solution of monoethanolamine has been used as absorbent solvent stream and CO2/N2 gas mixture as gas stream. ...
Master's degree thesis in the field: Chemical Engineering Abstract In this project, an attempt was made to take a small step towards the synthesis of silicoaluminophosphate molecular sieve in nano dimensions and its use in fuel cells with methanol fuel. Therefore, in this way, nano silicoaluminophosphate was produced under optimal hydrothermal conditions. Next, XRD, FT-IR, SEM ...
Dissertation for Master's degree (M.Sc) Major: Organic Chemistry Abstract Carbon-carbon bond formation is very important in organic chemistry. One of the reactions that lead to the formation of this bond is the Novnagel condensation reaction. The products of this reaction have wide applications, including in the pharmaceutical, paint, polymer and other industries. . . are In ...
Dissertation for Master's Degree in Food Safety and Health Abstract Introduction: In this research, according to the antimicrobial property and resistance of titanium dioxide-based silver nanoparticle packages to the penetration of gases, including oxygen, the effect of these packages on the fungal flora of consumer breads was compared with common polyethylene packages. This ...
The master's thesis of precision instruments and automation in the oil industry. The introduction of the entire research is one of the important scientific, technical and economic topics, the issue of corrosion of metals and the protection of metal facilities. Investigating the topic of corrosion is not so simple and with all the research done, its factors are still not known ...
Master's Thesis in the field of Nano Chemical Engineering Abstract Removal of phenol from industrial effluents using nanotechnology In this research, the photocatalytic removal of phenol as a model of organic pollutant in a fluidized bed reactor under ultraviolet and visible radiations has been studied. The effects of important parameters such as pH, catalyst concentration, ...
Master's thesis in the field of chemical nanoengineering Abstract: Fabrication of ceramic nanofiltration membrane for chloride ion separation (case study: gas condensate) In this research, chloride ion separation using alumina-titania double layer nanofiltration membrane has been investigated. For this purpose, first, the alumina-titania double-layer membrane is made based on ...
Thesis for master's degree in the field: chemical engineering Abstract Hard polyurethane[1] is always considered one of the most effective and practical polymers in various industries, especially the coating industry. Excellent adhesive property, curing ability at ambient temperature and corrosion resistance of this polymer are some of its remarkable features. This study was ...
Master's thesis in the field of chemical engineering. Abstract of the laboratory study of cadmium removal from drinking water. Today, the pollution of natural waters with heavy metals has caused concern in many countries of the world due to the destructive effects it has on living organisms. Cadmium enters drinking water through sewage and erosion of mineral rocks and effluents ...
Dissertation for receiving the degree of Doctor of Dentistry Abstract The long-term clinical success of implants is dependent on osseointegration and adhesion of soft tissues and epithelium to implant surfaces. Various indices including: plaque index, gingival index, bleeding during probing and bone resorption are used to evaluate the health of the soft tissues around the ...
Master's thesis in the field of chemical nanoengineering, abstract modeling of chloride ion removal from gas condensate using nanofiltration of chloride ion in gas condensate can cause severe corrosion of equipment and pipes. Therefore, it is necessary to remove it from the condensate flow. The aim of this work is the mathematical modeling of the nanofiltration process for the ...
Thesis for receiving a master's degree in the field of chemical engineering in the field of biotechnology. The abstract of this research was conducted in order to optimize the operational parameters for the use of bioleaching technology in the extraction of copper from the slag produced by the reflective smelting furnaces of Sarchesmeh copper complex. Wide applications of ...
Thesis for receiving a master's degree in the field of chemical engineering, environmental orientation. Abstract: Ethylenediaminetetraacetic acid, due to its ability to solubilize and deactivate metal ions by forming a complex in the aqueous environment, has many applications, especially as a chelating agent for iron fertilizer. The synthesis of this substance is done in ...
Chemical Engineering Master's Thesis Abstract: In this research, a method for the synthesis of ZSM-5 nanozeolite was presented. Then this nanozeolite was modified with CTAB surfactant and its characteristics were investigated using XRD, FT-IR, and SEM methods. This nanozeolite was used to prepare a modified carbon paste electrode (SMNZ/CPE) to measure sulfate anion. Also, the ...
Dissertation for Master's Degree in Advanced Chemical Engineering Abstract A new method based on point cloud extraction to extract uranium from water samples and its measurement using alpha spectrometry based on liquid scintillation has been investigated. Uranium extraction from water samples in the presence of a number of available surfactants and chelating reagents has been ...
Master's thesis in the field of mechanical engineering - energy conversion trend Abstract: In this research, the turbulent flow of a non-Newtonian nanofluid in a microchannel with a circular cross-section is simulated. First, the types of classification of microchannels, the methods of making microchannels, as well as the advantages and challenges of using microchannels are ...
Dissertation for receiving a master's degree in the field of preservation and modification. Abstract In this research, the effect of combined modification of colloidal silver-hot water on the heat transfer from the hot press plates to the heart of the beech (Fagus orientalis) chipboard cake, the physical and mechanical properties of the chipboard and the chemical changes of the ...
Dissertation for Master's Degree in Analytical Chemistry Abstract Nowadays, nanostructures have attracted the attention of many researchers due to their new features and applications in different fields and branches of science and technology. Meanwhile, nanocomposites, due to their unique physical and chemical properties, as well as potential applications in catalytic, ...
Master's Thesis in Agricultural Engineering, Food Industry, Abstract: The effect of the water extract of the monkey flower plant on the storage time and quality of frozen rainbow salmon. Recently, due to the avoidance of using chemical preservatives in the food industry, the attention of researchers has been drawn to the use of natural compounds in order to increase the shelf ...
Dissertation for M.Sc Mechanical Engineering - Energy Conversion Orientation Abstract: In this research, the turbulent flow of a non-Newtonian nanofluid in a microchannel with a circular cross-section is simulated. First, the types of classification of microchannels, the methods of making microchannels, as well as the advantages and challenges of using microchannels are stated. ...
Dissertation for receiving M.Sc degree in mechanical-structural engineering and the production of aluminide permeable coatings for the protection of gas turbines used in power plant, aviation, marine, oil and gas and petrochemical industries, which are mainly attacked by high temperature oxidation and hot corrosion phenomena. In this research, in order to use the effect of ...
Dissertation for Master's Degree in Food Science and Engineering, Food Microbiology, Abstract: Today, the increase in environmental pollution and the decrease in oil resources have led to the development and replacement of biodegradable packaging instead of packaging derived from petroleum resources. Also, in this regard, the use of antimicrobial compounds such as silver ...
Master's Thesis in Polymer Science and Technology Abstract: Today, cancer is one of the most important concerns of the medical world, for which no definitive cure has been found so far. Radiation therapy is one of the methods used to control and reduce the complications of cancer. Brachytherapy is one of these radiation therapy methods in which the radiation source is placed ...
Master's Thesis for Master's Degree Abstract In recent years, there have been vast advances in the field of image sensors and digital imaging systems, but still theoretical and practical limitations affect the resolution of images taken with these cameras. Super resolution techniques have been developed in recent years to overcome these limitations. These techniques create a ...
The thesis for obtaining a master's degree in the field of mechanics, investigating and analyzing the free and forced vibrations of a multi-walled carbon nanotube placed in an elastic medium in order to achieve a clear mathematical understanding of the behavior of different walls of the nanotube under the influence of van der Waals forces and the elastic medium is one of the ...
Dissertation for obtaining a doctorate degree in the field of mechanical engineering - manufacturing and production: the advantages of using semi-solid processes are reducing the amount of gas porosity and shrinkage and modifying the microstructure, which aims to improve the mechanical properties of the part. In this research, the cooling ramp method has been used to produce the ...
The thesis (or dissertation) for receiving a master's degree in the field of food industry, majoring in food chemistry. The abstract of this study is designed to compare the chemical composition and antioxidant effect of laboratory cinnamon essential oil [1] and two commercial essential oils [2]. In order to identify the chemical compounds of the essential oils, a mechanical ...
Dissertation for receiving a master's degree in the field: Food Science and Industry Abstract: In addition to changing the organoleptic characteristics of the food, the oxidation of oils reduces the nutritional value and shelf life of oils and has a negative effect on the health of consumers due to the production of undesirable compounds in the oil. There are many ways to ...
Dissertation for Master's Degree in Mechanical Engineering Field: Applied Design Abstract In this thesis, stability analysis of composite beam reinforced with carbon nanotubes on elastic support under axial force is investigated. The distribution of nanotubes is assumed to be uniform[1]. To determine the properties of materials reinforced with nanotubes, the results of molecular ...
Master's Thesis in Energy Systems Abstract Crude oil distillation unit is one of the most important and critical operational units of any refinery. This unit often requires revision in the design of the structure (Revamping) or making small changes in its existing condition without the need to reduce or increase the basic process devices (Retrofitting) in order to achieve higher ...
Dissertation for M.Sc degree, specialization: manufacturing and production, abstract in this thesis, how to improve the properties of plastics with the help of heat treatment. First, we will talk briefly about polymers, plastics and their sub-branches and heat treatment on them, and then we will discuss the effect of annealing heat treatment on heavy polyethylene sheets that are ...
Master's Thesis of Islamic Arts, metal specialization Abstract: Art suffered stagnation and decline in the early centuries of Islam's arrival in Iran due to the instability of the governments. However, the 3rd to 5th centuries of Hijri were a fruitful era in all cultural aspects including Islamic art. This part of history played a significant role in the formation, expansion and ...
Dissertation to receive a master's degree in the field of Analytical Chemistry, Abstract Biosynthesis of gold nanoparticles with small size and biological stability are very important and have various biomedical applications. In this work, an easy and simple method for the green synthesis of gold nanoparticles using willow tree bark extract is reported. The bark of the willow ...
Master's Thesis in Nano Chemical Engineering Abstract The aim of this study is to separate cationic polyacrylamide from the waste water of Prodeh Tabas coal washing plant using the polymer membrane filtration process. The primary membrane was prepared using polyacrylonitrile (PAN) by phase inversion process, and then they were prepared using hydrolysis as chemical modification ...
Master's Thesis in Chemical Engineering, Thermodynamics and Kinetics Abstract: A major part of the final properties of the product in emulsion polymerization is determined by the particle size distribution. In this project, an accurate model based on population balance equations (zero-one model) which includes the phenomena of nucleation and particle growth has been chosen to ...
Master's Thesis (M.Sc.) Direction: Process Design Abstract Currently, membranes have found a special place in different separation industries and have wide applications in different fields of separation, including liquid solutions and different gases. Membrane technology is one of the most widely used technologies in today's industry, whose field of application is wide ranging ...
A master's thesis in the field of chemical engineering, abstract of the laboratory study and modeling of calcium carbonate production from calcium chloride solution by absorbing carbon dioxide from industrial exhaust gases, by the efforts of Amin Alamdari, the effect of carbon dioxide concentration on the precipitation of calcium carbonate species and the kinetics of calcium ...
Dissertation for Master of Chemical Engineering Abstract: In this research, it is attempted to solve one of the major problems in the field of drug production, i.e. improving the solubility of drug particles in body fluids[1] by using the process of solvent/anti-solvent precipitation and nano-scale sediment production in a ?-shaped microchannel, the effect of surfactant ...
Dissertation for receiving the master's degree ""M.Sc."" Orientation: Biotechnology Abstract: Lipases are one of the most important enzymes in biological systems in various industries. The application of free lipase is not cost-effective in industries due to its shorter half-life. Enzyme immobilization on different bases increases stability, repeated use, ease of product ...
Dissertation for Master's Degree in Physical Education and Sports Sciences - Sports Physiology Abstract: Background and Objective: During metabolic changes during pregnancy, the mother's contact with heavy metals is considered very important for placental function and fetal health. But it has been assumed that endurance training by affecting the activity of metalloproteins such ...
Medical Biotechnology Master's Thesis Background Abstract: Fibroblast growth factors (FGF) and their receptors (FGFR) play an essential role in the cell. Dysregulation of FGF/FGFR signaling pathways is associated with many abnormalities and cancer development. From this group, type 2 fibroblast growth factor receptor plays an essential role in cell signaling and regulation of ...
A master's thesis in the field of chemical engineering, abstract of biodiesel production from microalgae by supercritical carbon dioxide extraction method. In this research, different stages of biodiesel production from Chlorella vulgaris microalgae, especially the stage of oil extraction from it, were experimentally studied. The method of microalgae cultivation was selected ...
Dissertation for receiving a general doctorate degree Abstract Introduction and purpose: Metallobetalactamases (MBL) are enzymes that are produced by non-fermenting Gram-negative bacilli such as Pseudomonas aeruginosa and make these strains resistant to carbapenems. As a result, Pseudomonas carrying metallobetalactamase genes are considered a serious clinical threat. Considering ...
Dissertation for Master's Degree in Organic Chemistry Abstract Today, lung cancer is considered one of the most common diseases worldwide and has the highest mortality rate among all types of cancer. Therefore, early diagnosis of this disease is of special importance. Considering that the common methods for detecting lung cancer are expensive and time-consuming, offering cheaper ...
Abstract: After wheat, rice is one of the most important grains consumed by the people of the world, which is widely present in people's diet. Half of the world's population depends on rice as a staple food. There are many items of rice in the world and now rice is one of the strategic products of the country. Contamination of rice with heavy metals may be a serious threat to ...