Download more than 100 examples of thesis, proposal and project topics about mechanical properties of soil in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Master's Thesis in Civil Engineering - Earthquake Engineering March 2012 Abstract Reinforced soil is a special material that is created from the combination of soil and reinforcing member. Arming components resistant to N
Dissertation for M.Sc degree in soil and soil mechanics engineering, summer 2013, first chapter, introduction of micro candles 1-1 Micro-candles in general in dealing with problematic soils
Doctoral Dissertation of Soil and Foundation Mechanics Abstract In this research, the discrete element method was used to analyze the wave propagation and investigate the factors affecting the wave speed in granular soils. The method of separate elements is important due to the possibility of preparing completely similar samples and checking the effect of changes of a certain ...
Dissertation for Master's Degree in Civil Engineering, Soil and Foundation Mechanics Abstract: Since many structures are built in dense urban areas, there is an increasing need to build buildings and geotechnical structures on soft clay soils. Clay soils usually show significant creep deformation. Although a lot of research has been done on the creep behavior of natural clay, ...
Dissertation for Master's Degree in Civil-Structural Engineering Abstract In our country, most of the structures and maybe all the conventional buildings are analyzed and designed independently, which means that these structures are mainly analyzed and designed by conventional software and considering a rigid or articulated support, and then the forces obtained at the base of ...
Master's Thesis in Civil-Soil Field Abstract Dense clay layers are used as one of the most common impermeable layers in most geotechnical structures such as earthen dams and municipal and radioactive waste disposal centers. Due to special geotechnical characteristics, these layers are damaged by cracking during their lifetime, these cracks increase the permeability of the layer ...
Civil Engineering Master's Thesis - Soil and Foundation Mechanics Abstract From the past until now, one of the most economical methods to improve the mechanical properties of clay soils has been stabilization by means of additives such as lime and cement in construction projects such as road construction and consolidation of building foundations. Also, with the passage of time ...
Tendency of soil mechanics and foundations. Abstract: Investigating the behavior of soils due to different loadings is one of the most important issues in geotechnical engineering. The behavior of soils depends on several parameters such as grain size, grain type, loading method, stress history, etc. Non-alignment of main stress and main strain directions is a phenomenon that ...
(M.SC) Dissertation to receive a master's degree, specialization: organic, abstract of the thesis (including summary, objectives, implementation methods and obtained results): Computational chemistry using computer software is a powerful tool in the design of molecules with special properties. Computational chemistry is a general and general term that includes a wide range of ...
Dissertation for a master's degree in civil engineering, soil and foundation mechanics. Abstract: Since many structures are built in dense urban areas, there is an increasing need to build buildings and geotechnical structures on soft clay soils. Clay soils usually show significant creep deformation. Although a lot of research has been done on the creep behavior of natural clay, ...
Dissertation for M.Sc degree, specialization: manufacturing and production, abstract in this thesis, how to improve the properties of plastics with the help of heat treatment. First, we will talk briefly about polymers, plastics and their sub-branches and heat treatment on them, and then we will discuss the effect of annealing heat treatment on heavy polyethylene sheets that are ...
Thesis for the M.Sc degree in wood and paper industry engineering, Mehr 2013 Abstract: In this research, the physical and mechanical properties of nanocomposites obtained from cellulose nanofibers and poly polymers
Dissertation for Master's Degree in Civil Engineering - Soil and Foundation Mechanics Abstract The purpose of this research is to improve the mechanical and geotechnical properties of windy sand soils. Because one of the major problems of windblown sand is its low resistance under natural and saturated moisture conditions, a laboratory study was conducted to investigate the ...
Dissertation for Master's Degree in Mechatronics Engineering Persian Abstract The purpose of this project is to introduce a new approach for troubleshooting gas transmission pipelines using mechanical waves, which is much cheaper and easier than other methods. who are currently working. These lines are usually located in difficult environmental conditions and far away and in ...
Master's thesis in the field of chemical engineering. Abstract of the laboratory study of cadmium removal from drinking water. Today, the pollution of natural waters with heavy metals has caused concern in many countries of the world due to the destructive effects it has on living organisms. Cadmium enters drinking water through sewage and erosion of mineral rocks and effluents ...
Dissertation for Master's Degree in Rock Mechanics Introduction Excavations made in rocks have different dimensions according to their purpose and vary from small dimensions to dimensions comparable to huge concrete structures. Surface excavations can be used as a space for extracting mines, creating buildings, and supporting and overflowing dams, factories, power plants, as ...
Summer 1390 Expertise Master of the field: Civil Engineering Orientation: Structure Abstract: In this thesis, the effect of nanosilica on the mechanical properties and durability of concrete containing polypropylene fibers
Dissertation for Master's Degree in Civil Engineering - Structures Abstract: One of the important problems in seismic design and implementation of buildings is the significant dead weight used in it. Therefore, in the case of using lightweight concrete that has favorable mechanical properties, significant benefits can be obtained, including a reduction in dead load and ...
In order to receive a master's degree in textile technology, it is essential to know the physical and mechanical properties of carpets to produce a quality product and maintain the proper appearance. In this research, an attempt has been made to provide a model to determine the relationship between the different parameters of these characteristics, therefore, to measure these ...
Education Level: Master's Degree, Field: Civil Engineering, Major: Structures Abstract: In this thesis, the effect of nanosilica on the mechanical properties and durability of concrete containing polypropylene fibers was investigated. Polypropylene fibers with a length of 18 mm and a ratio of length to diameter of 0.9 mµ were used. The effect of fibers and nanosilica in three ...
Mechanical Engineering Master's Thesis Proposed Design - Introduction The use of fibers in concrete started about 50 years ago and day by day their use in various fields has increased. Adding fibers to the mixing design improves the mechanical properties of concrete and the behavior of the structure after cracking. It also increases the softness and malleability of the section. ...
Master's Thesis of Polymer Industry Engineering Abstract Phenolic resins have excellent dimensional, thermal, chemical and corrosion resistance. Also, the fugitives produced during the thermal degradation of this resin have low toxicity and, in addition, they have high charring. Phenolic resins, due to having desirable properties, are used in many fields such as internal parts ...
Dissertation for obtaining a doctorate degree in the field of mechanical engineering - manufacturing and production: the advantages of using semi-solid processes are reducing the amount of gas porosity and shrinkage and modifying the microstructure, which aims to improve the mechanical properties of the part. In this research, the cooling ramp method has been used to produce the ...
Thesis for receiving the degree of M.Sc. Trend: soil and soil in February 2013 Abstract: Allowed load capacity or safe load capacity is a virtual pressure that is within the range of
Master's Thesis of Ardakan Faculty of Art and Architecture, Carpet Department (Primary Materials and Dyeing) Mehr 2013 Abstract: During the period of its use, the hand-woven carpet may be affected by various factors and conditions
Dissertation for M.A. Orientation: Natural Geography (Geomorphology-Hydrology) Abstract The increasing population growth followed by the development of industrial activities on the one hand and non-compliance with environmental requirements on the other hand, has caused huge amounts of pollutants to enter the environment in the last few decades. Accumulation of some dangerous ...
In order to obtain a master's degree in the field of civil engineering - soil and foundation orientation, Abstract Nowadays, circular foundations are more or less used for structures, especially structures that have axial symmetry. In this research, a numerical study was conducted on bearing capacity and settlement of annular foundation. PLAXIS software was used for modeling. ...
Master's thesis in the field of civil engineering, structure orientation. Abstract: In this study, the effect of some effective parameters on the strength of polymer concrete based on epoxy resin, including hardener, filler, and solvent, has been investigated. Rice husk ash and broom stalk ash were used as fillers and acetone-toluene mixture with a ratio of 50-50% was used as a ...
Dissertation for Master's Degree in Civil Engineering, Soil and Foundation Mechanics Abstract: Fine-grained clay soils have always caused problems in construction projects, one of the ways to improve the properties of problematic clay soils is to use lime to stabilize the soil. It swells. this
Master's thesis in the field of civil engineering, structural orientation. Abstract In this study, the evaluation and comparison of nonlinear and numerical analysis of deep reinforced concrete beams with openings without reinforcement with deep concrete beams with openings reinforced with FRP sheets and deep reinforced concrete beams without openings by Abaqus finite element ...
Dissertation for receiving a master's degree in the field of civil engineering with a focus on soil and foundation. Abstract: The compressibility behavior of soils has become an important concern in geotechnical engineering. As buildings, embankments and roads are implemented, significant settlements often occur. Since long-term settlements occur due to creep, therefore, the ...
Dissertation for M.A. public administration, human resources orientation. Job burnout is a psychological syndrome consisting of emotional exhaustion, depersonalization (negative reaction and lack of feelings towards the client) and reduced sense of sufficiency, which creates a negative attitude towards oneself, job and others and endangers the general health of the individual. ...
Dissertation for Master's Degree (M.A) Major: Sports Biomechanics Abstract Objective: In recent years, the use of permitted sports supplements has become one of the most important parts of an athlete's preparation to participate in the field of competition. Despite the many researches that have been conducted in the field of supplements, there is no general consensus on ...
Master's Thesis in Civil Engineering (Soil and Foundation) Abstract Dense sand piles have been used since 1950 in Japan and then in other countries of the world as one of the most effective and economical methods in strengthening soil in order to prevent liquefaction, increase bearing capacity and improve soils with different grain sizes. The process of implementing dense sand ...
Dissertation Chemistry for Master's Degree Abstract Acrylic-based pressure-sensitive adhesives are more expensive than rubber-based adhesives, but they have a longer life and resistance to high temperatures, chemicals, UV rays, solvents, light, softeners, and the environment. Modification of acrylic pressure-sensitive adhesives is useful for improving adhesion properties. In ...
Master's thesis in the field of polymerization engineering, abstract was determined by using experimental design methods to determine the optimal feed recipe for the preparation of nitrile rubber. Initially, to determine the factors affecting the rate of polymerization, screening tests were designed according to the Plate-Boorman method, which examines a large number of factors ...
Dissertation for receiving a master's degree in chemical engineering, advanced orientation. Abstract The limitation of heat transfer fluids in various industries due to their poor thermal conductivity has caused the improvement of the heat transfer of working fluids to be considered as a new method of advanced heat transfer. So that the idea of ??dispersing solid particles in ...
Master's Thesis of Polymer Science and Technology Engineering Abstract Urethane-acrylate resins are of interest due to their low viscosity and flame retardant properties and relatively easy curing. On the other hand, natural fibers with renewable resources, low price, low density and high special properties have a special ability to be used in composites. However, their ...
Master's Thesis of Polymer Industrial Engineering Abstract Cross-linked polyethylene is one of the materials that is widely used in the field of insulation production in cables due to having suitable electrical properties and good electrical strength. Nowadays, one of the methods of optimizing the properties and changing the behavior of polymers is the use of filler particles ...
Thesis for obtaining a master's degree in the field: management, specialization: agriculture. Abstract This research was conducted in order to determine and identify the economic and social effects of watershed management operations in Lesbo area in Rodsar city, as well as to examine the views and opinions of villagers regarding the effectiveness of watershed management ...
Master's Thesis in Mechanical Engineering - Applied Design Abstract In recent years, most of the researches have been focused on compressive and combined loading in order to investigate the buckling of nanotube structures, and for this purpose, the work done on tensile loading is very limited. Since the results of compressive and tensile loading in carbon nanotubes are ...
Master's thesis in the field of mechanical engineering - energy conversion trend Abstract: In this research, the turbulent flow of a non-Newtonian nanofluid in a microchannel with a circular cross-section is simulated. First, the types of classification of microchannels, the methods of making microchannels, as well as the advantages and challenges of using microchannels are ...
Dissertation for M.Sc Mechanical Engineering - Energy Conversion Orientation Abstract: In this research, the turbulent flow of a non-Newtonian nanofluid in a microchannel with a circular cross-section is simulated. First, the types of classification of microchannels, the methods of making microchannels, as well as the advantages and challenges of using microchannels are stated. ...
Dissertation for Master's Degree in Food Science and Engineering. Abstract Every year, millions of tons of plastic waste, including bags, plastic envelopes, and packaging materials, enter the environment and cause problems to the environmental cycle due to their irreversibility, and as a result, the need for degradable plastics in nature is increasing day by day. Today, the ...
Dissertation for Master's Degree in Horticulture-Fruit Science Abstract After being separated from the mother plant, the fruit is alive and breathes and undergoes significant changes after harvesting. The storage period of fruits can be increased by optimizing environmental conditions, minimizing mechanical damage and using beneficial compounds such as gibberellins and ...
Thesis for obtaining a master's degree in the field: agricultural engineering, horticultural sciences, specialization: physiology and breeding of fruit trees. Abstract: Drought stress is one of the most important factors limiting the growth of plants in arid and semi-arid regions of the world, such as Iran. The importance of using water resources and the occurrence of recent ...
Dissertation for M.Sc Master's Degree, Mechanical Engineering - Applied Design Abstract Modern wind turbines today tend to vibrate a lot due to their elastic, long and narrow structure. Therefore, all components of wind turbines should be subjected to vibration and modal analysis in the design stages, and their natural frequencies should be reviewed with turbine excitation ...
Abstract: Research in the field of heat transfer of suspensions with nanometer-sized solid particles in the base fluid has started in the last decade. Recent research in the field of nanofluids has shown that the addition of nanoparticles causes a significant increase in the heat transfer of the suspension. Another common way to improve the thermal performance of devices is to ...
Master's thesis in the field of mechanics, specialization: mechanical engineering - energy conversion. Abstract: One of the most important components of fluid transmission systems are control valves, which can be seen in different routes of oil and gas transmission pipelines, etc. In control valves, the most important issue is the property of the flow in order to achieve the ...
Dissertation for Master's Degree in Mechanical Engineering (Energy Conversion) Abstract In this thesis, the mass and heat transfer of water-aluminum oxide nanofluid in a two-dimensional porous medium under a magnetic field and in the vicinity of a vertical wall has been investigated. The boundary wall can be permeable or impermeable. The concentration and temperature of the wall ...
Master's thesis in the field of mechanical engineering (applied design trend) Abstract of the study of the deterioration of non-isotropic TWB sheets under the hydroforming process. During the research, four different metals of aluminum alloys 6111-T4, 5083-H18, 5083-O and dual-phase steel DP590 and two spherical tensile tests and simple uniaxial tensile tests were used. Then we ...
Dissertation for receiving master's degree in mechanical engineering, the trend of manufacturing and production of complex industrial products from metal pipes with the aim of increasing the strength-to-weight ratio of structures and especially reducing the fuel consumption of vehicles has attracted the attention of industrialists in recent years. In this regard, one of the new ...
Master's Thesis in Mechanical Engineering (Applied Design) Abstract of three-dimensional interlayer stress investigation in mechanical connections in layered composite materials The purpose of this thesis is to investigate three-dimensional interlayer stresses in mechanical connections in layered composite materials. For this purpose, finite element method and ABAQUS software ...
Dissertation for obtaining a master's degree in civil engineering, structural orientation, March 2013, abstract of the scope of using FRP materials for shear strengthening of reinforced concrete beams in
Dissertation of master's degree in civil-structural engineering Abstract: Divergent bracing frames are considered earthquake-resistant systems for steel structures. These braces are from my difficulty
Dissertation for Master's Degree in Polymer Industry Engineering April 2013 Abstract Nowadays, the topic of energy and energy saving in all fields, even in homes, is one of the most important.
Master's thesis in the field of chemical engineering Kidney stones are one of the most common diseases in the world, most of its crystals consist of calcium oxalate crystals. Therefore, it has been a long time that the investigation of effective substances in controlling this disease through the control of calcium oxalate crystals has been considered. The purpose of this ...
To receive a master's degree in textile technology engineering. Abstract In the previous research, multi-sized nano-roughness was developed using nanoparticles with different sizes and different surface charges along with silicone resin coating to produce multi-purpose textiles with stable properties. In this research, the idea of ??using laser irradiation and finishing textiles ...
Master's Thesis in Civil Engineering - Roads and Transportation) Overview Pavements are usually affected by various factors that affect their life. Since a road passes through different areas where the subsoil, the type and volume of traffic and the climatic conditions of these areas are different from each other, therefore, various disadvantages and defects arise in different ...
Dissertation for receiving the master's degree ""M. Sc."" Field: Agricultural Engineering Major: Water Structures Abstract The sediment transfer process is a completely complex, variable and non-linear phenomenon. So that the behavior of the river in the sediment transfer capacity for a certain discharge is different in different times. Therefore, due to the complexity of the ...
Dissertation for master's degree in the field of civil engineering, road and transportation, the abstract of asphalt failures is one of the problems that are the concern of road and transportation engineers today, and every year huge costs are spent on the maintenance and repair of asphalt roads. Many efforts have been made to increase the strength and life of asphalt, among ...
Master's thesis in the field of civil engineering, soil and foundation, today, due to the progress of the tunneling industry, the need to analyze and design underground structures in rocky environments is felt more than in the past. Although there are many numerical and practical software available in this field, none of them are complete and perfect in all fields, and each of ...
Dissertation for Master's Degree in Mechatronics Abstract In this thesis, a phase-locked loop is designed based on micro-electromechanical systems. The loop system has a feedback phase lock that compares the input phase with the output phase. This comparison is done by a phase detector. Phase detector is a circuit whose average output voltage is linearly proportional to the ...
Dissertation for master's degree in electrical engineering, power trend. Abstract Overvoltages are one of the most important factors that destroy and threaten the insulation of power network equipment and often cause interruptions in service and reduce the quality of power and reliability of the system. In addition, transient overvoltages caused by lightning are more common and ...
Master's thesis in the field of civil engineering, soil and foundation, in this research, the bearing capacity of the conical pile group and the cylindrical pile group with the same volume are calculated and compared. Due to the lack of numerical studies and modeling by software for conical piles compared to laboratory tests in this field, in this research, the modeling of the ...
Abstract Underground facilities are an integral part of modern society and are used for many applications, including subways and railway lines, highways, material storage and water and sewage transportation. is used Underground facilities built in areas affected by earthquake activity must withstand both earthquake and static loading. By reviewing the historical cases of ...
Master's Thesis of Civil-Environmental Engineering Abstract Garbage is one of the environmental pollutants that cause many problems such as the spread of pollution in water, air and soil and transmission to humans and animals directly or indirectly. Today, with the ever-increasing expansion of urban and industrial societies, we are witnessing the widening of the amount of these ...
Dissertation for Master's Degree in Civil Engineering, Hydraulic Structures, Abstract: It is obvious that water resources are essential for the life of living organisms and especially for human life. Drainers are a set of structures that are used to transfer water from the dam lake to the discharge point downstream. Therefore, due to the importance of this part of the dam, the ...
Dissertation for receiving a Master's degree (M.Sc.) specialization: Environment Abstract Gaseous liquids obtained from the refining of sour gases are also sour and contain a large percentage of hydrogen sulfide and mercaptans. Therefore, after distilling and preparing the products, it needs refining processes to remove or reduce the amount of sulfur and mercaptans present. ...
Master's thesis in the field of civil engineering, soil mechanics, and abstract excavation projects in urban areas are always at risk. Therefore, a suitable safety margin should be considered in the design of the guard structure. Traditional slope stability assessment methods, which are usually based on empirical judgments such as the concept of confidence factor and limit ...
Dissertation for receiving the master's degree ""MSc"" specialization: applied chemistry Farsi abstract of the thesis or dissertation (including: summary of objectives, implementation methods and results obtained in maximum 10 lines): The possibility of manipulating matter at the nano level was first proposed in written form by Richard Feynman. During his conference called ...
Dissertation for M.Sc degree, field: chemical engineering, orientation: biotechnology, research method: first, the surface of the gold electrode was coated with nickel and cobalt salt in suitable conditions, then the standard solution of atrazine poison was placed in contact with the modified electrode, and after optimizing a series of mechanical and chemical parameters, its ...
Civil engineering, soil and foundation, abstract, considering that all engineering infrastructures and vital urban and non-urban places and arteries such as: foundations of buildings, bridges, silos, dams, retaining walls, marine structures, industrial facilities, etc. . . All spread on a platform called the earth. The importance of investigating the type of instability in ...
Dissertation for M.Sc. Master's degree Abstract: Nanostructures introduced with the pioneering of fullerene and carbon nanotubes have opened new horizons in various fields of science and technology, the most important of which is the use of nanostructures in biological sciences. Silicon carbide nanostructures are considered heteroatom nanostructures that have some ionic ...
Master's Thesis (M.Sc.) Direction: Process Design Abstract Currently, membranes have found a special place in different separation industries and have wide applications in different fields of separation, including liquid solutions and different gases. Membrane technology is one of the most widely used technologies in today's industry, whose field of application is wide ranging ...
Master's thesis in the field of chemical nanoengineering Abstract The synthesis of silicon dioxide nanoparticles from silicon oil waste using the synthesis method of silicon dioxide nanoparticles [1] has many industrial applications. The industrial use of these particles in traditional fields as well as new fields is expanding, for which new applications are continuously found. ...
Master's thesis in the field of physical education and sports sciences, sports biomechanics, abstract: flat feet are among the most common abnormalities. Anatomical abnormalities can change the kinematic variables of the foot joints, which results in a different walking pattern. Identifying the quality and quantity of the variables affected by these anomalies is effective in the ...