Download more than 100 examples of thesis, proposal and project topics about mechanical properties of lightweight concrete in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Dissertation for Master's Degree in Civil Engineering - Structures Abstract: One of the important problems in seismic design and implementation of buildings is the significant dead weight used in it. Therefore, in the case of using lightweight concrete that has favorable mechanical properties, significant benefits can be obtained, including a reduction in dead load and ...
Summer 1390 Expertise Master of the field: Civil Engineering Orientation: Structure Abstract: In this thesis, the effect of nanosilica on the mechanical properties and durability of concrete containing polypropylene fibers
Dissertation for Master's Degree Abstract: Dealing with external forces such as earthquakes is one of the most important missions of civil engineers. In order to achieve this goal, the light metal frame system, which has advantages such as the possibility of industrial production, prefabrication and lightness, can be considered as a suitable alternative to traditional systems. ...
Education Level: Master's Degree, Field: Civil Engineering, Major: Structures Abstract: In this thesis, the effect of nanosilica on the mechanical properties and durability of concrete containing polypropylene fibers was investigated. Polypropylene fibers with a length of 18 mm and a ratio of length to diameter of 0.9 mµ were used. The effect of fibers and nanosilica in three ...
Master's thesis in the field of civil engineering, structure orientation. Abstract: In this study, the effect of some effective parameters on the strength of polymer concrete based on epoxy resin, including hardener, filler, and solvent, has been investigated. Rice husk ash and broom stalk ash were used as fillers and acetone-toluene mixture with a ratio of 50-50% was used as a ...
Master's thesis in the field of civil engineering, structural orientation. Abstract In this study, the evaluation and comparison of nonlinear and numerical analysis of deep reinforced concrete beams with openings without reinforcement with deep concrete beams with openings reinforced with FRP sheets and deep reinforced concrete beams without openings by Abaqus finite element ...
Mechanical Engineering Master's Thesis Proposed Design - Introduction The use of fibers in concrete started about 50 years ago and day by day their use in various fields has increased. Adding fibers to the mixing design improves the mechanical properties of concrete and the behavior of the structure after cracking. It also increases the softness and malleability of the section. ...
Dissertation for obtaining a master's degree in civil engineering, structural orientation, March 2013, abstract of the scope of using FRP materials for shear strengthening of reinforced concrete beams in
Master's Thesis in Civil-Structural Engineering Today, domes and arches have found wide applications in architectural and industrial structures due to their suitable coverage of large openings. The use of today's technologies in styling and optimizing energy consumption in these types of structures is one of the important challenges facing engineers. Therefore, the need to ...
Dissertation Chemistry for Master's Degree Abstract Acrylic-based pressure-sensitive adhesives are more expensive than rubber-based adhesives, but they have a longer life and resistance to high temperatures, chemicals, UV rays, solvents, light, softeners, and the environment. Modification of acrylic pressure-sensitive adhesives is useful for improving adhesion properties. In ...
Thesis for the M.Sc degree in wood and paper industry engineering, Mehr 2013 Abstract: In this research, the physical and mechanical properties of nanocomposites obtained from cellulose nanofibers and poly polymers
The effect of fiber and pozzolanic materials on the mechanical properties of glass fiber reinforced concrete Master's Thesis of Civil-Structural Engineering Abstract The failure and destruction of concrete is highly dependent on the formation of cracks and microcracks. With increasing loading, microcracks are connected and form cracks. In order to solve this problem and also to ...
Introduction In today's era, the presence of waste materials resulting from various physical and chemical processes is one of the important problems of industrialized and developing countries. So that extensive research is being carried out for methods of recycling or disposing of them to minimize the damage to the environment. In this regard, construction researchers, like ...
Dissertation of master's degree in civil-structural engineering Abstract: Divergent bracing frames are considered earthquake-resistant systems for steel structures. These braces are from my difficulty
Master's Thesis in Civil Engineering - Earthquake Engineering March 2012 Abstract Reinforced soil is a special material that is created from the combination of soil and reinforcing member. Arming components resistant to N
Dissertation for Master's Degree in Civil Engineering, Soil and Foundation Mechanics Abstract: Since many structures are built in dense urban areas, there is an increasing need to build buildings and geotechnical structures on soft clay soils. Clay soils usually show significant creep deformation. Although a lot of research has been done on the creep behavior of natural clay, ...
Dissertation for master's degree in the field of civil engineering, road and transportation, the abstract of asphalt failures is one of the problems that are the concern of road and transportation engineers today, and every year huge costs are spent on the maintenance and repair of asphalt roads. Many efforts have been made to increase the strength and life of asphalt, among ...
Dissertation for a master's degree in civil engineering, soil and foundation mechanics. Abstract: Since many structures are built in dense urban areas, there is an increasing need to build buildings and geotechnical structures on soft clay soils. Clay soils usually show significant creep deformation. Although a lot of research has been done on the creep behavior of natural clay, ...
Master's Thesis for Master's Degree Abstract Carbon nanotube can be considered the most amazing nanostructured material discovered so far. Unique features such as high strength, light weight, and high energy absorption capability have made this material recently attracted the attention of scientists in making bulletproof vests. In this thesis, a structural model in the Abaqus ...
Dissertation to receive a master's degree in mechanical engineering in the field of construction and production. Abstract: The growth and expansion of cities and the development of urban life require up-to-date and expandable infrastructure. Transportation systems are among the basic infrastructures in cities, among which the creation and development of subway networks is of ...
Dissertation for Master's Degree in Rock Mechanics Introduction Excavations made in rocks have different dimensions according to their purpose and vary from small dimensions to dimensions comparable to huge concrete structures. Surface excavations can be used as a space for extracting mines, creating buildings, and supporting and overflowing dams, factories, power plants, as ...
In order to receive a master's degree in textile technology, it is essential to know the physical and mechanical properties of carpets to produce a quality product and maintain the proper appearance. In this research, an attempt has been made to provide a model to determine the relationship between the different parameters of these characteristics, therefore, to measure these ...
Master's Thesis of Polymer Industry Engineering Abstract Phenolic resins have excellent dimensional, thermal, chemical and corrosion resistance. Also, the fugitives produced during the thermal degradation of this resin have low toxicity and, in addition, they have high charring. Phenolic resins, due to having desirable properties, are used in many fields such as internal parts ...
Dissertation for obtaining a doctorate degree in the field of mechanical engineering - manufacturing and production: the advantages of using semi-solid processes are reducing the amount of gas porosity and shrinkage and modifying the microstructure, which aims to improve the mechanical properties of the part. In this research, the cooling ramp method has been used to produce the ...
Master's Thesis of Ardakan Faculty of Art and Architecture, Carpet Department (Primary Materials and Dyeing) Mehr 2013 Abstract: During the period of its use, the hand-woven carpet may be affected by various factors and conditions
Dissertation for Master's Degree > Direction: Hydraulic Structures Abstract: One of the assumptions that is made to simplify the dynamic analysis of the existing weighted concrete dams is the uniformity of the foundation in terms of physical parameters such as modulus of elasticity and damping. This is despite the fact that, in practice, different geological conditions may ...
Dissertation for Master's Degree in Civil Engineering, Structures, Abstract: This thesis is the results of a numerical and parametric study on the effect of reinforcing reinforced concrete shear wall with FRP composite and applying the results of the finite element method. The finite element program is compared and calibrated against experimental data. Then, the numerical ...
Dissertation for master's degree in civil engineering, structural orientation. Abstract Good bond strength between the old and new concrete surface is a key factor in the performance of concrete repairs. The purpose of this thesis is to investigate and evaluate the bond strength between the surface of the old concrete and the added concrete. In this thesis, a laboratory research ...
Master's thesis in the field of civil engineering, structure orientation Alkaline Aggregate Reaction [1] (AAR), is a chemical reaction that occurs in some concrete structures. (AAR) is a reaction between alkaline fluids in the pores and silica aggregates. Concrete failure, including expansion and cracking due to the alkaline reaction of aggregates, is of particular importance. ...
Master's thesis in the field of structural civil engineering Abstract: Steel-reinforced concrete is a material that is widely used in civil engineering structures due to reasons such as suitable compressive strength, low cost of preparation and availability of raw materials. But reinforced concrete prepared from cement paste, ordinary aggregates, and steel rebars has weaknesses ...
Dissertation for Master's Degree (M.A) Major: Sports Biomechanics Abstract Objective: In recent years, the use of permitted sports supplements has become one of the most important parts of an athlete's preparation to participate in the field of competition. Despite the many researches that have been conducted in the field of supplements, there is no general consensus on ...
Master's thesis in the field of polymerization engineering, abstract was determined by using experimental design methods to determine the optimal feed recipe for the preparation of nitrile rubber. Initially, to determine the factors affecting the rate of polymerization, screening tests were designed according to the Plate-Boorman method, which examines a large number of factors ...
Dissertation for receiving a master's degree in chemical engineering, advanced orientation. Abstract The limitation of heat transfer fluids in various industries due to their poor thermal conductivity has caused the improvement of the heat transfer of working fluids to be considered as a new method of advanced heat transfer. So that the idea of ??dispersing solid particles in ...
(M.SC) Dissertation to receive a master's degree, specialization: organic, abstract of the thesis (including summary, objectives, implementation methods and obtained results): Computational chemistry using computer software is a powerful tool in the design of molecules with special properties. Computational chemistry is a general and general term that includes a wide range of ...
Master's Thesis of Polymer Science and Technology Engineering Abstract Urethane-acrylate resins are of interest due to their low viscosity and flame retardant properties and relatively easy curing. On the other hand, natural fibers with renewable resources, low price, low density and high special properties have a special ability to be used in composites. However, their ...
Master's Thesis of Polymer Industrial Engineering Abstract Cross-linked polyethylene is one of the materials that is widely used in the field of insulation production in cables due to having suitable electrical properties and good electrical strength. Nowadays, one of the methods of optimizing the properties and changing the behavior of polymers is the use of filler particles ...
Master's Thesis in Mechanical Engineering - Applied Design Abstract In recent years, most of the researches have been focused on compressive and combined loading in order to investigate the buckling of nanotube structures, and for this purpose, the work done on tensile loading is very limited. Since the results of compressive and tensile loading in carbon nanotubes are ...
Master's thesis in the field of mechanical engineering - energy conversion trend Abstract: In this research, the turbulent flow of a non-Newtonian nanofluid in a microchannel with a circular cross-section is simulated. First, the types of classification of microchannels, the methods of making microchannels, as well as the advantages and challenges of using microchannels are ...
Dissertation for M.Sc Mechanical Engineering - Energy Conversion Orientation Abstract: In this research, the turbulent flow of a non-Newtonian nanofluid in a microchannel with a circular cross-section is simulated. First, the types of classification of microchannels, the methods of making microchannels, as well as the advantages and challenges of using microchannels are stated. ...
Dissertation for M.Sc Master's Degree, Mechanical Engineering - Applied Design Abstract Modern wind turbines today tend to vibrate a lot due to their elastic, long and narrow structure. Therefore, all components of wind turbines should be subjected to vibration and modal analysis in the design stages, and their natural frequencies should be reviewed with turbine excitation ...
Abstract: Research in the field of heat transfer of suspensions with nanometer-sized solid particles in the base fluid has started in the last decade. Recent research in the field of nanofluids has shown that the addition of nanoparticles causes a significant increase in the heat transfer of the suspension. Another common way to improve the thermal performance of devices is to ...
Master's thesis in the field of mechanics, specialization: mechanical engineering - energy conversion. Abstract: One of the most important components of fluid transmission systems are control valves, which can be seen in different routes of oil and gas transmission pipelines, etc. In control valves, the most important issue is the property of the flow in order to achieve the ...
Dissertation for Master's Degree in Mechanical Engineering (Energy Conversion) Abstract In this thesis, the mass and heat transfer of water-aluminum oxide nanofluid in a two-dimensional porous medium under a magnetic field and in the vicinity of a vertical wall has been investigated. The boundary wall can be permeable or impermeable. The concentration and temperature of the wall ...
Master's thesis in the field of mechanical engineering (applied design trend) Abstract of the study of the deterioration of non-isotropic TWB sheets under the hydroforming process. During the research, four different metals of aluminum alloys 6111-T4, 5083-H18, 5083-O and dual-phase steel DP590 and two spherical tensile tests and simple uniaxial tensile tests were used. Then we ...
Dissertation for receiving master's degree in mechanical engineering, the trend of manufacturing and production of complex industrial products from metal pipes with the aim of increasing the strength-to-weight ratio of structures and especially reducing the fuel consumption of vehicles has attracted the attention of industrialists in recent years. In this regard, one of the new ...
Master's Thesis in Mechanical Engineering (Applied Design) Abstract of three-dimensional interlayer stress investigation in mechanical connections in layered composite materials The purpose of this thesis is to investigate three-dimensional interlayer stresses in mechanical connections in layered composite materials. For this purpose, finite element method and ABAQUS software ...
Dissertation for M.Sc degree, specialization: manufacturing and production, abstract in this thesis, how to improve the properties of plastics with the help of heat treatment. First, we will talk briefly about polymers, plastics and their sub-branches and heat treatment on them, and then we will discuss the effect of annealing heat treatment on heavy polyethylene sheets that are ...
Thesis for receiving the degree of M.Sc. Trend: soil and soil in February 2013 Abstract: Allowed load capacity or safe load capacity is a virtual pressure that is within the range of
Dissertation for M.Sc degree in soil and soil mechanics engineering, summer 2013, first chapter, introduction of micro candles 1-1 Micro-candles in general in dealing with problematic soils
Dissertation for Master's Degree in Polymer Industry Engineering April 2013 Abstract Nowadays, the topic of energy and energy saving in all fields, even in homes, is one of the most important.
To receive a master's degree in textile technology engineering. Abstract In the previous research, multi-sized nano-roughness was developed using nanoparticles with different sizes and different surface charges along with silicone resin coating to produce multi-purpose textiles with stable properties. In this research, the idea of ??using laser irradiation and finishing textiles ...
In order to obtain a master's degree in the field of civil engineering - soil and foundation orientation, Abstract Nowadays, circular foundations are more or less used for structures, especially structures that have axial symmetry. In this research, a numerical study was conducted on bearing capacity and settlement of annular foundation. PLAXIS software was used for modeling. ...
Doctoral Dissertation of Soil and Foundation Mechanics Abstract In this research, the discrete element method was used to analyze the wave propagation and investigate the factors affecting the wave speed in granular soils. The method of separate elements is important due to the possibility of preparing completely similar samples and checking the effect of changes of a certain ...
Dissertation for Master's Degree in Civil Engineering - Soil and Foundation Mechanics Abstract The purpose of this research is to improve the mechanical and geotechnical properties of windy sand soils. Because one of the major problems of windblown sand is its low resistance under natural and saturated moisture conditions, a laboratory study was conducted to investigate the ...
Dissertation for receiving a master's degree in the field of civil engineering with a focus on soil and foundation. Abstract: The compressibility behavior of soils has become an important concern in geotechnical engineering. As buildings, embankments and roads are implemented, significant settlements often occur. Since long-term settlements occur due to creep, therefore, the ...
Dissertation for Master's Degree in Civil-Structural Engineering Abstract In our country, most of the structures and maybe all the conventional buildings are analyzed and designed independently, which means that these structures are mainly analyzed and designed by conventional software and considering a rigid or articulated support, and then the forces obtained at the base of ...
Master's Thesis in Civil-Soil Field Abstract Dense clay layers are used as one of the most common impermeable layers in most geotechnical structures such as earthen dams and municipal and radioactive waste disposal centers. Due to special geotechnical characteristics, these layers are damaged by cracking during their lifetime, these cracks increase the permeability of the layer ...
Master's thesis in the field of civil engineering, soil and foundation, today, due to the progress of the tunneling industry, the need to analyze and design underground structures in rocky environments is felt more than in the past. Although there are many numerical and practical software available in this field, none of them are complete and perfect in all fields, and each of ...
Dissertation for Master's Degree in Civil Engineering with Earthquake Orientation Abstract: Semi-rigid joints [1] are joints whose hardness is between the two states of grip and joint and transmit a part of the anchor, in other words, its degree of rigidity is between 20% and 90%. In this thesis
Dissertation for Master's Degree in Mechatronics Abstract In this thesis, a phase-locked loop is designed based on micro-electromechanical systems. The loop system has a feedback phase lock that compares the input phase with the output phase. This comparison is done by a phase detector. Phase detector is a circuit whose average output voltage is linearly proportional to the ...
Dissertation for Master's Degree in Mechatronics Engineering Persian Abstract The purpose of this project is to introduce a new approach for troubleshooting gas transmission pipelines using mechanical waves, which is much cheaper and easier than other methods. who are currently working. These lines are usually located in difficult environmental conditions and far away and in ...
Master's Thesis in Computer-Software (M.Sc) Abstract The quality of service in wireless sensor networks is very different compared to traditional networks. Some of the parameters that are used in evaluating the quality of service in these networks are: network coverage, optimal number of active nodes in the network, network lifetime and energy consumption. In this thesis, three ...
Master's thesis in the field of civil engineering, soil and foundation, in this research, the bearing capacity of the conical pile group and the cylindrical pile group with the same volume are calculated and compared. Due to the lack of numerical studies and modeling by software for conical piles compared to laboratory tests in this field, in this research, the modeling of the ...
Civil Engineering Master's Thesis - Soil and Foundation Mechanics Abstract From the past until now, one of the most economical methods to improve the mechanical properties of clay soils has been stabilization by means of additives such as lime and cement in construction projects such as road construction and consolidation of building foundations. Also, with the passage of time ...
Tendency of soil mechanics and foundations. Abstract: Investigating the behavior of soils due to different loadings is one of the most important issues in geotechnical engineering. The behavior of soils depends on several parameters such as grain size, grain type, loading method, stress history, etc. Non-alignment of main stress and main strain directions is a phenomenon that ...
Dissertation for receiving the master's degree ""MSc"" specialization: applied chemistry Farsi abstract of the thesis or dissertation (including: summary of objectives, implementation methods and results obtained in maximum 10 lines): The possibility of manipulating matter at the nano level was first proposed in written form by Richard Feynman. During his conference called ...
Dissertation for M.Sc degree, field: chemical engineering, orientation: biotechnology, research method: first, the surface of the gold electrode was coated with nickel and cobalt salt in suitable conditions, then the standard solution of atrazine poison was placed in contact with the modified electrode, and after optimizing a series of mechanical and chemical parameters, its ...
Dissertation for M.Sc. Master's degree Abstract: Nanostructures introduced with the pioneering of fullerene and carbon nanotubes have opened new horizons in various fields of science and technology, the most important of which is the use of nanostructures in biological sciences. Silicon carbide nanostructures are considered heteroatom nanostructures that have some ionic ...
Master's Thesis (M.Sc.) Direction: Process Design Abstract Currently, membranes have found a special place in different separation industries and have wide applications in different fields of separation, including liquid solutions and different gases. Membrane technology is one of the most widely used technologies in today's industry, whose field of application is wide ranging ...
Master's thesis in the field of chemical nanoengineering Abstract The synthesis of silicon dioxide nanoparticles from silicon oil waste using the synthesis method of silicon dioxide nanoparticles [1] has many industrial applications. The industrial use of these particles in traditional fields as well as new fields is expanding, for which new applications are continuously found. ...
Master's thesis in the field of physical education and sports sciences, sports biomechanics, abstract: flat feet are among the most common abnormalities. Anatomical abnormalities can change the kinematic variables of the foot joints, which results in a different walking pattern. Identifying the quality and quantity of the variables affected by these anomalies is effective in the ...
Academic Dissertation for Master's Degree in: Organic Chemistry 1-1) Introduction Today, nanotechnology [1] is an attractive subject that has attracted the attention of scientists, industrialists and even ordinary people due to the special properties and practical potentials of these materials. Considering the wide applications of carbon nanotubes, the methods of mass production ...
Master's Thesis in the field of Nano Chemical Engineering Abstract Removal of phenol from industrial effluents using nanotechnology In this research, the photocatalytic removal of phenol as a model of organic pollutant in a fluidized bed reactor under ultraviolet and visible radiations has been studied. The effects of important parameters such as pH, catalyst concentration, ...
Thesis for master's degree in the field: chemical engineering Abstract Hard polyurethane[1] is always considered one of the most effective and practical polymers in various industries, especially the coating industry. Excellent adhesive property, curing ability at ambient temperature and corrosion resistance of this polymer are some of its remarkable features. This study was ...
Master's thesis in the field of chemical engineering. Abstract of the laboratory study of cadmium removal from drinking water. Today, the pollution of natural waters with heavy metals has caused concern in many countries of the world due to the destructive effects it has on living organisms. Cadmium enters drinking water through sewage and erosion of mineral rocks and effluents ...
Master of Chemistry (Chemistry-Physics) Abstract In the present work, the theory of stable structures, bond energies and interactions in H2SO4...HNO...(H2O)n clusters (n = 0-2) were studied at the MP2/aug-cc-pVDZ computational level. The presence of one and two H2O molecules strengthens the interaction between HNO and H2SO4 molecules, and this indicates the positive role of H2O ...
Master's Thesis in the field of Chemical Engineering (no orientation) Abstract of the laboratory study of the wear phenomenon of liquid containing sand in pipelines. The studied fluid consists of two phases, liquid and solid. The liquid phase is water, and sand particles form the solid phase. In this research, the parameters affecting the wear rate, including: fluid speed, sand ...
Chemical Engineering Master's Thesis Abstract: In this research, a method for the synthesis of ZSM-5 nanozeolite was presented. Then this nanozeolite was modified with CTAB surfactant and its characteristics were investigated using XRD, FT-IR, and SEM methods. This nanozeolite was used to prepare a modified carbon paste electrode (SMNZ/CPE) to measure sulfate anion. Also, the ...