Download more than 100 examples of thesis, proposal and project topics about material resistance in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Dissertation for obtaining a master's degree in civil engineering, structural orientation, March 2013, abstract of the scope of using FRP materials for shear strengthening of reinforced concrete beams in
Dissertation for Master's Degree in Civil Engineering (M.Sc) Orientation: Structure Winter 2013 Abstract: Resilient construction of important government buildings, infrastructure facilities and vital arteries due to the increase
Master's thesis in the field of civil engineering, structure orientation. Abstract: In this study, the effect of some effective parameters on the strength of polymer concrete based on epoxy resin, including hardener, filler, and solvent, has been investigated. Rice husk ash and broom stalk ash were used as fillers and acetone-toluene mixture with a ratio of 50-50% was used as a ...
The effect of fiber and pozzolanic materials on the mechanical properties of glass fiber reinforced concrete Master's Thesis of Civil-Structural Engineering Abstract The failure and destruction of concrete is highly dependent on the formation of cracks and microcracks. With increasing loading, microcracks are connected and form cracks. In order to solve this problem and also to ...
Dissertation for receiving M.SC Master's degree Major: Water Engineering Abstract: Dams are the largest man-made structures. Their design often stems from their unique nature and the consequence of failure, which is certainly greater than the collapse of other types of structures. The stability of dam body and foundation structures can be analyzed and checked in various ways. ...
Dissertation for receiving the master's degree ""M.Sc"" orientation: abstract structure In today's reinforced concrete buildings, the use of interframe separators is very common. Intermediate frames with building materials are the main types of separators that are used in this type of buildings. In previous research, these interframe separators are usually considered as ...
Dissertation for receiving a master's degree in the field of Civil Engineering (M.Sc) Major: Structure Abstract: The retrofitting of important government buildings, infrastructure facilities and vital arteries due to the increase in terrorist attacks around the world and the possibility of bombings near buildings and urban places is one of the most important discussions in the ...
Dissertation for obtaining a doctorate degree in dentistry. Introduction Removing large amounts of dental tissue weakens the restored tooth. The type of restoration and composite method can be one of the influencing factors on tooth fracture resistance under occlusal forces. The purpose of this study was to investigate the effect of using new low-shrinkage composites on the ...
Dissertation for receiving the degree of Doctor of Dentistry, Dental Materials Research Center Abstract Objective: One of the objectives of this study was to investigate the fracture resistance of the teeth coated with various crown and root restorations. Materials and methods: 60 freshly extracted human premolar teeth were selected and randomly divided into five groups of ...
Dissertation for receiving Ph.D degree, specialization: exercise physiology, background and purpose: normal liver function is of particular importance for metabolism, and it may be affected by exercise. Although many studies have examined the effects of aerobic exercise on liver function, available evidence shows that resistance exercise has been less investigated. On the other ...
Master's Thesis Field: Electricity Major: Electronics Chapter 1 Basics and Generalities Introduction Today, biosensors are used in various fields such as medicine, chemical industry, food industry, environment and the production of medical-health products [1]. In clinical and medical environments, it is very necessary to have tools to diagnose diseases. The development of ...
Abstract Canker disease is caused by bacteria (Xanthomonas citri pv. citri), which every year reduces the yield and quality of citrus fruits, especially lemons and oranges. This research was conducted with the aim of isolating and homogenizing two genes encoding harpins HrpW and HrpG from Xcc bacterium strain NIGEB-088 and making recombinant plasmids pBI-hrpG and pBI-hrpW in ...
Master's Thesis in Mechanical Engineering (Applied Design): Abstract of the analysis of leading damage in pin connections of composite materials. The purpose of this research is to analyze the leading damage in pin connections of composite materials. To do this, finite element software ABAQUS and FORTRAN programming have been used. The contact between the composite plate with ...
Master's Thesis on Car Structure and Body Abstract In recent years, many researchers have allocated their attention to a special category of materials, memory materials. The ability to absorb and control vibrations actively or passively, respectively, is affected by the features of shape memory and hysteresis energy loss caused by the pseudo-elastic characteristics of these ...
Expert thesis Master of Civil Engineering, Structural Orientation, September 2013 Abstract Today, with the progress of science in the construction industry, many methods have been presented to improve reinforced concrete structures
Master's Thesis in Civil Engineering - Earthquake Engineering 1391 Abstract Structures with frames with coaxial braces are among earthquake resistant systems. These structures are widely
Thesis of master's degree in civil engineering, soil and foundation mechanics orientation, September 2019, abstract: analysis of dynamic interaction between soil and structure (due to the mutual effect of the structure and its retaining soil on each other), D
Dissertation for Master's Degree in Civil Engineering – Shahrivar Marine Structures, September 1992 Abstract: Pipe-in-pipe systems are widely used in transmission line applications.
Summer 1390 Expertise Master of the field: Civil Engineering Orientation: Structure Abstract: In this thesis, the effect of nanosilica on the mechanical properties and durability of concrete containing polypropylene fibers
Dissertation of master's degree in civil engineering, structural orientation, October 1390, first chapter of generalities. 1-1 Introduction In recent years, there have been many advances in the field
Dissertation of master's degree in civil-structural engineering Abstract: Divergent bracing frames are considered earthquake-resistant systems for steel structures. These braces are from my difficulty
Master's Thesis in Civil Engineering - Earthquake Engineering March 2012 Abstract Reinforced soil is a special material that is created from the combination of soil and reinforcing member. Arming components resistant to N
Master's Thesis of Ardakan Faculty of Art and Architecture, Carpet Department (Primary Materials and Dyeing) Mehr 2013 Abstract: During the period of its use, the hand-woven carpet may be affected by various factors and conditions
Master's Thesis in Civil Engineering - Structural Orientation, February 2013 Abstract: The performance of a building during an earthquake depends on many factors, as a result, predicting the seismic performance of structures should be considered either explicitly or implicitly as part of the design or evaluation. Predicting the seismic response of the structure is very ...
Dissertation for Master's Degree in Counseling and Guidance Abstract: The purpose of this research was to investigate the relationship between self-efficacy, academic procrastination and test anxiety with academic progress in male students. A descriptive-correlational research design was used. The statistical sample is 258 male students in the first grade of secondary school in ...
Dissertation for Master's Degree in Polymer Industry Engineering April 2013 Abstract Nowadays, the topic of energy and energy saving in all fields, even in homes, is one of the most important.
Thesis for the M.Sc degree in wood and paper industry engineering, Mehr 2013 Abstract: In this research, the physical and mechanical properties of nanocomposites obtained from cellulose nanofibers and poly polymers
Chapter 1 1-1-Introduction: Common fluids such as water, oils and ethylene glycol, which are usually used as heat transfer media, have a limited ability in terms of thermal properties, which is the first obstacle to compress and increase the efficiency of heat exchangers. One of the ways to improve heat transfer is to add particles to the fluid. This method is used for fluids ...
Master's Thesis in Advertising and Cultural Communication Abstract Investigating the manner in which competing media pay to the news of the day - on July 18, when the political history of the opposition events in Iran took place, and on October 9, when the Palestine Conference was held with the participation of Islamic countries as the cause of the Islamic Revolution and the ...
Dissertation for Master's Degree in Psychology (M.A) Major: General Abstract of research on the relationship between religion and health has often shown positive relationships between these two variables. People who have a weak sense of social and religious adequacy, turn to drugs to escape from social anxiety and are vulnerable. On the other hand, addiction destroys moral, ...
Dissertation for Master's Degree in Psychology (M.A) Orientation: General Abstract: The purpose of this research was to investigate the relationship between the satisfaction of basic psychological needs and primary maladaptive schemas with emotional dysregulation in students. For this purpose, 364 people (166 girls and 198 boys) were selected from undergraduate students of Bo ...
Master's thesis (M.A) in the field of political geography. Sacrifice and martyrdom are valuable concepts in all human societies. All nations respect their devotees, veterans and warriors; But the methods of this sanctity and respect are different. In Islamic teachings, the essence of the culture of self-sacrifice and martyrdom is self-sacrifice, sincerity and intelligent and ...
Master's Thesis in Geography and Rural Planning Rural development originates from various factors, one of which is favorable housing. A suitable housing is actually a stable housing that has the characteristics of proper comfort, suitable space, suitable health factors, suitable location, and accessibility in terms of work. Therefore, the main goal of this research is to ...
Dissertation to receive the master's degree ""M.S.c"" specialization: Textile chemistry and fiber science Abstract: One of the important processes in the completion of textile goods is the underhand improvement in textiles. Finishing the softener provides a desirable softness to the fabric and improves its properties, and the main goals of the softener are to reduce static ...
Dissertation for obtaining a master's degree, field: human geography, orientation: urban planning, abstract: urban decay is one of the serious problems and unavoidable phenomena that urban management in all countries of the world is facing. What is important is that urban wear and tear is not specific to a specific country or a specific city, but all cities and villages in the ...
Dissertation for Master's Degree in Remote Sensing and Geographical Information System Abstract Large and active faults located in the east of Minab city are considered to be one of the most important tectonic factors in the region, which have caused numerous and severe earthquakes in the past years, and their activity may cause heavy damages in the future. Therefore, the city ...
Thesis for Master's Degree in Chemical Engineering Today, creating a safe environment in which all harmful factors are identified, evaluated, eliminated or controlled in order to guarantee the health of people and facilities is one of the priorities of industrial management. Safety science has also been reactive like the traditional approach to safety, that is, managers did not ...
To receive a master's degree in textile technology engineering. Abstract In the previous research, multi-sized nano-roughness was developed using nanoparticles with different sizes and different surface charges along with silicone resin coating to produce multi-purpose textiles with stable properties. In this research, the idea of ??using laser irradiation and finishing textiles ...
Thesis for obtaining a master's degree in the field of physical education and sports science, majoring in sports physiology. Objective abstract: The purpose of this study was to investigate the effect of post-activity strengthening exercise program (PAP) on physical indicators and the 100-meter freestyle record of 10- to 14-year-old female swimmers. Method: For this purpose, 24 ...
Dissertation for Master's degree (A.M) specialization: painting Abstract of this research was done in order to investigate new media in the art of the 20th century. Research, descriptive, analysis and content methods were used to carry out these studies, as well as the methods of collecting information in the form of library and data collection. The main purpose of this thesis ...
Dissertation for Master's degree (M.A.) major: painting. Dissertation abstract (including summary, goals, implementation methods and results obtained): There are many old crafts that during their lifetime have given the life of their opponents the song of ethnic memories in Farah Bakhsh's melody, and now they are dying in old age. Undoubtedly, breaking away from the ethnic ...
Dissertation for Master's Degree in Civil Engineering - Structures Abstract: One of the important problems in seismic design and implementation of buildings is the significant dead weight used in it. Therefore, in the case of using lightweight concrete that has favorable mechanical properties, significant benefits can be obtained, including a reduction in dead load and ...
In order to obtain a master's degree in the field of civil engineering - soil and foundation orientation, Abstract Nowadays, circular foundations are more or less used for structures, especially structures that have axial symmetry. In this research, a numerical study was conducted on bearing capacity and settlement of annular foundation. PLAXIS software was used for modeling. ...
Dissertation for Master's Degree > Direction: Hydraulic Structures Abstract: One of the assumptions that is made to simplify the dynamic analysis of the existing weighted concrete dams is the uniformity of the foundation in terms of physical parameters such as modulus of elasticity and damping. This is despite the fact that, in practice, different geological conditions may ...
Master's Thesis (M.sc) Civil Engineering, Soil and Foundation Mechanics Abstract In this research, the stability of soil reinforced with geogrid located on an underground cavity was analyzed using plaxis software, and the effect of several factors such as the number of geogrid layers, the length of the geogrid layer, the stiffness of the geogrid layer, the optimal location of ...
Master's Thesis in Civil Engineering - Roads and Transportation) Overview Pavements are usually affected by various factors that affect their life. Since a road passes through different areas where the subsoil, the type and volume of traffic and the climatic conditions of these areas are different from each other, therefore, various disadvantages and defects arise in different ...
Doctoral Dissertation of Soil and Foundation Mechanics Abstract In this research, the discrete element method was used to analyze the wave propagation and investigate the factors affecting the wave speed in granular soils. The method of separate elements is important due to the possibility of preparing completely similar samples and checking the effect of changes of a certain ...
Master's Thesis in Civil-Structural Engineering Abstract In order to estimate the capacity of buildings, it will be much easier and less expensive to use static methods instead of incremental dynamic methods. Although the incremental dynamic method gives more accurate and closer answers to the real behavior of the structure, its high cost and time has increased the desire to use ...
Dissertation for Master's Degree in Civil Engineering, Soil and Foundation Mechanics Abstract: Fine-grained clay soils have always caused problems in construction projects, one of the ways to improve the properties of problematic clay soils is to use lime to stabilize the soil. It swells. this
Dissertation for Master's Degree in Civil Engineering - Soil and Foundation Mechanics Abstract The purpose of this research is to improve the mechanical and geotechnical properties of windy sand soils. Because one of the major problems of windblown sand is its low resistance under natural and saturated moisture conditions, a laboratory study was conducted to investigate the ...
Dissertation for Master's Degree Abstract: Dealing with external forces such as earthquakes is one of the most important missions of civil engineers. In order to achieve this goal, the light metal frame system, which has advantages such as the possibility of industrial production, prefabrication and lightness, can be considered as a suitable alternative to traditional systems. ...
Dissertation for receiving a master's degree in the field of civil engineering with a focus on soil and foundation. Abstract: The compressibility behavior of soils has become an important concern in geotechnical engineering. As buildings, embankments and roads are implemented, significant settlements often occur. Since long-term settlements occur due to creep, therefore, the ...
Dissertation for Master's Degree in Civil Engineering - Marine Structures Abstract In this research, while using the results of SPT and CPT tests carried out in 4 different points of the Shahid Rajai Port Development Project site and using the methods of Seyed Idris and Robertson Ride, the liquefaction potential of the region is evaluated. Such an agent
Dissertation for M.A. degree Abstract of this research, knowing the conditions governing the Fahlian River, determines the Manning roughness coefficient in the studied area using various experimental and semi-experimental methods and tables for use in designs. And it presents the best and most reliable method of determining the roughness coefficient using field studies and ...
Dissertation for master's degree in the field of civil engineering, road and transportation, the abstract of asphalt failures is one of the problems that are the concern of road and transportation engineers today, and every year huge costs are spent on the maintenance and repair of asphalt roads. Many efforts have been made to increase the strength and life of asphalt, among ...
Master's Thesis in Civil-Soil Field Abstract Dense clay layers are used as one of the most common impermeable layers in most geotechnical structures such as earthen dams and municipal and radioactive waste disposal centers. Due to special geotechnical characteristics, these layers are damaged by cracking during their lifetime, these cracks increase the permeability of the layer ...
Master's thesis in the field of structural engineering. Abstract: The increase in vulnerability caused by earthquakes and the large number of earthquake casualties caused by structures and houses that are weak in terms of construction forces people to conduct studies to reduce these risks and damages. Studies such as severe earth movement and seismic hazards related to it play ...
Master's thesis in the field of civil engineering, soil and foundation, today, due to the progress of the tunneling industry, the need to analyze and design underground structures in rocky environments is felt more than in the past. Although there are many numerical and practical software available in this field, none of them are complete and perfect in all fields, and each of ...
Dissertation to receive M.Sc degree in civil engineering, structural orientation. Abstract: One of the ways to strengthen the building against lateral loads is the use of a wind system (convergent or divergent). The increasing use of steel braces to deal with earthquake forces requires that the seismic performance of these types of systems be given more attention. The common ...
Dissertation for Master's Degree in Civil Engineering, Structures, Abstract: This thesis is the results of a numerical and parametric study on the effect of reinforcing reinforced concrete shear wall with FRP composite and applying the results of the finite element method. The finite element program is compared and calibrated against experimental data. Then, the numerical ...
Dissertation for Master's Degree in Civil Engineering with Earthquake Orientation Abstract: Semi-rigid joints [1] are joints whose hardness is between the two states of grip and joint and transmit a part of the anchor, in other words, its degree of rigidity is between 20% and 90%. In this thesis
Master's Thesis in Civil-Structural Engineering Today, domes and arches have found wide applications in architectural and industrial structures due to their suitable coverage of large openings. The use of today's technologies in styling and optimizing energy consumption in these types of structures is one of the important challenges facing engineers. Therefore, the need to ...
Master's Thesis in Civil Engineering-Earthquake Abstract Using braces as a lateral resistance system in steel structures is one of the most common methods to withstand the forces caused by earthquakes. One of the weak points of this system is the compression resistance of the bracing member and its buckling as a result of reducing the member's load. Today, this problem has been ...
In order to receive a master's degree in textile technology, it is essential to know the physical and mechanical properties of carpets to produce a quality product and maintain the proper appearance. In this research, an attempt has been made to provide a model to determine the relationship between the different parameters of these characteristics, therefore, to measure these ...
Dissertation of Master's Degree in Civil Engineering - Structure Abstract In metal structures, one of the most important places of stress concentration is the joint. In form cutting, the shear force at the connection point is so high that a part of the beam or its reinforcement is broken and separated in pieces, and this is due to negligence in the design of the connection or ...
Dissertation for Master's degree (M.S) Chapter 1 History of dynamic analysis of liquid storage tanks and regulatory orders in this regard Abstract The main goal of this research is to investigate the effect of the presence of seismic isolators on the dynamic performance of liquid storage tanks during an earthquake. In this regard, it is necessary to first know the dynamic ...
Master's Thesis in Civil Engineering, Earthquake Orientation Abstract: Bridge structures are affected by various loads and are designed according to the level of risk that is considered for them. Explosive loading is one of the loads that threaten the health of bridges. It is necessary to evaluate the amount of damage and performance of bridges under the effect of this loading ...
Master's Thesis (Civil Engineering - Water and Wastewater Engineering) Abstract: In this study, ram impact pump modeling was done by the software that was prepared. This software finds the outputs of the HAMMER software as input and by obtaining other information (including the pumping height, etc.) it calculates the amount of pumped water every time the valve is suddenly turned ...
Master's Thesis Field: Civil Engineering Abstract Bridges are inseparable members of the means of communication and are very influential in economic and social conditions. The passage of time and random loads are among the things that threaten the health of bridges. Abnormal loads caused by natural accidents, execution errors and some other issues can cause progressive collapse ...
Dissertation for master's degree in civil engineering, structural orientation. Abstract Good bond strength between the old and new concrete surface is a key factor in the performance of concrete repairs. The purpose of this thesis is to investigate and evaluate the bond strength between the surface of the old concrete and the added concrete. In this thesis, a laboratory research ...
Master's Thesis in Accidents Abstract: Vehicle traffic safety is one of the most basic principles in traffic engineering and transportation planning in the world. Non-observance of safety principles in the design of roads, maintenance and planning of transportation and traffic in the country has caused heavy damages to the society. Slip resistance[1] is considered as one of the ...
Dissertation for Master's Degree in Civil Engineering, Structures Chapter 1: Introduction-1-Introduction In recent years, the philosophy of traditional methods, which were based on the design of structures against natural hazards, has undergone major changes. Extensive destruction of structures designed on the basis of old regulations in recent earthquakes, advances in analysis ...
The final exam for receiving a master's degree in computer engineering (M.SC) specialization: software Abstract: Since the beginning of digitalization of real and legal documents, the owners of their documents have always been looking for a suitable way to protect their copyright. The increasing expansion and growth of the Internet has caused extensive changes in the way of life ...
Master's thesis in the field of civil engineering, soil and foundation, in this research, the bearing capacity of the conical pile group and the cylindrical pile group with the same volume are calculated and compared. Due to the lack of numerical studies and modeling by software for conical piles compared to laboratory tests in this field, in this research, the modeling of the ...
Education Level: Master's Degree, Field: Civil Engineering, Major: Structures Abstract: In this thesis, the effect of nanosilica on the mechanical properties and durability of concrete containing polypropylene fibers was investigated. Polypropylene fibers with a length of 18 mm and a ratio of length to diameter of 0.9 mµ were used. The effect of fibers and nanosilica in three ...
Civil Engineering Master's Thesis - Soil and Foundation Mechanics Abstract From the past until now, one of the most economical methods to improve the mechanical properties of clay soils has been stabilization by means of additives such as lime and cement in construction projects such as road construction and consolidation of building foundations. Also, with the passage of time ...
Dissertation for M.A. public administration, human resources orientation. Job burnout is a psychological syndrome consisting of emotional exhaustion, depersonalization (negative reaction and lack of feelings towards the client) and reduced sense of sufficiency, which creates a negative attitude towards oneself, job and others and endangers the general health of the individual. ...
Dissertation for receiving a master's degree in the field of civil engineering in the field of earthquakes. Abstract: The introduction of damage generators is very close to the concept of inelastic behavior and, as a result, hysteresis energy. Therefore, it can be said that the hysteresis energy at these levels can be a significant criterion for the design or control of the ...
Civil Engineering Master's Thesis, Soil and Foundation Engineering Abstract In this thesis, in order to analyze the behavior of surface foundations based on reinforced soil, a simple physical method based on the resistance of materials called ""cone method"" is used, which is actually used as an alternative to the exact solution methods that are based on the three-dimensional ...
Master's thesis in the field of civil engineering, structure orientation Alkaline Aggregate Reaction [1] (AAR), is a chemical reaction that occurs in some concrete structures. (AAR) is a reaction between alkaline fluids in the pores and silica aggregates. Concrete failure, including expansion and cracking due to the alkaline reaction of aggregates, is of particular importance. ...