Download more than 100 examples of thesis, proposal and project topics about liquid temperature in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Abstract Today, rice is the main food of more than half of the world's population and rice is cultivated in five continents and more than forty countries. Rice is one of the main meals of the people of Iran, until 1340, Iran exported more or less rice annually, and since then, as a result of the improvement of the economic situation of the people and the rapid increase of the ...
Dissertation for obtaining a master's degree in electrical engineering, electronics, abstract, accurate measurement and control of temperature in industrial and research systems is of particular importance, and the correct operation of some industrial and laboratory tools is possible only in a certain location with a small number of channels (maximum 8 channels). Therefore, the ...
Dissertation for Ph.D. Ph.D. Persian Summary Aripiprazole is an atypical antipsychotic drug that shows its therapeutic effect with a combination of antagonistic activity of 5-HT2A receptor and partial agonistic activity of 5-HT1A and D2 dopamine receptors. This drug is used in the treatment of schizophrenia, type I bipolar disorders and as an adjunctive treatment in major ...
Dissertation for obtaining a master's degree M. Sc)) Department of Chemistry - Green Synthesis of Organic Chemistry 2-phenylimidazoles boiled using ionic liquid. Imidazoles are an important group of heterocyclic compounds that have various biological and medicinal activities such as anti-hypertensive, anti-cancer, anti-HIV, anti-bacterial and pain reliever. In this thesis, new ...
Dissertation to receive M.Sc. Field of organic chemistry abstract green synthesis of 2-phenyl oxazoles boiled using ionic liquid Oxazoles are an important group of heterocyclic compounds. They are the structural subunits of various natural active products and are valuable synthetic and pharmaceutical precursors. Oxazoles have antibacterial, antifungal, anti-inflammatory and ...
Master's degree in electrical engineering, electronics, abstract, accurate measurement and control of temperature in industrial and research systems is of particular importance, and the correct operation of some industrial and laboratory tools is possible only in a specific location with a small number of channels (maximum 8 channels). Therefore, the decision was made to build a ...
Master's thesis in the field of mechanical engineering, energy conversion trend. Abstract: Considering that heat transfer is widely used in various fields of science, it is necessary to use wide recessed or raised surfaces due to physical and spatial limitations in electrical systems. The main purpose of using these surfaces is to increase heat transfer by increasing the ...
Dissertation for Master's degree (M.Sc) orientation: energy conversion. Abstract In this research, a study on irreversible absorption refrigeration systems based on internal and external irreversibility is presented with regard to the limited thermal capacities of external tanks. To optimize the system, three scenarios were defined, in which objective functions such as ...
Dissertation for Master's Degree in Civil Engineering/ Cold Water Engineering 1392 1-1- Introduction In this chapter, an overview of the concept of climate change and its causes and the effect of this phenomenon on natural resources and
Dissertation of master's degree in civil engineering, structural orientation, October 1390, first chapter of generalities. 1-1 Introduction In recent years, there have been many advances in the field
Master's Thesis of Faculty of Art and Architecture, Department: Carpet (Painting), October 2013 Abstract: Today, in today's advanced and industrialized world, using new methods, it is trying to make Tul products
The field of natural geography, climatology trend in environmental planning Abstract: Ardabil province in the northwest of the country with its long and elongated shape has faced climatic anomalies in recent years such as: increase in temperature especially in winter season, increase in the occurrence of hot winds, increase in evaporation and transpiration potential, decrease in ...
Master's thesis in chemical engineering field, vapor pressure is an important thermodynamic property in process equipment design and chemical engineering unit operation. Therefore, experimental vapor pressure data that cover the entire range of vapor pressure are very valuable, but due to the lack of accurate measurements for the vapor pressure of some materials near the triple ...
To receive a master's degree in textile technology engineering. Abstract In the previous research, multi-sized nano-roughness was developed using nanoparticles with different sizes and different surface charges along with silicone resin coating to produce multi-purpose textiles with stable properties. In this research, the idea of ??using laser irradiation and finishing textiles ...
Master's Thesis in Civil Engineering - Roads and Transportation) Overview Pavements are usually affected by various factors that affect their life. Since a road passes through different areas where the subsoil, the type and volume of traffic and the climatic conditions of these areas are different from each other, therefore, various disadvantages and defects arise in different ...
Dissertation for Master's Degree in Civil Engineering - Abstract Hydraulic structures in high dams of spillways, as one of the dependent hydraulic structures, have the important role of discharging the incoming floods into the dam reservoir with sufficient safety in free flow or under pressure downstream. In tunnel overflows where the flow is at a high speed and often under ...
Master's thesis in the field of civil engineering, structure orientation Alkaline Aggregate Reaction [1] (AAR), is a chemical reaction that occurs in some concrete structures. (AAR) is a reaction between alkaline fluids in the pores and silica aggregates. Concrete failure, including expansion and cracking due to the alkaline reaction of aggregates, is of particular importance. ...
Dissertation for receiving a Master's degree (M.Sc.) specialization: Environment Abstract Gaseous liquids obtained from the refining of sour gases are also sour and contain a large percentage of hydrogen sulfide and mercaptans. Therefore, after distilling and preparing the products, it needs refining processes to remove or reduce the amount of sulfur and mercaptans present. ...
Dissertation to receive the master's degree ""M.Sc. Orientation: ""Biochemical Engineering"" Abstract: The presence of sulfur compounds in gasoline creates a serious problem in air pollution, environment, corrosion of equipment and destruction of human health. The new environmental standards also impose strict limits on the amount of sulfur and aromatic compounds in gasoline. ...
Dissertation for obtaining a master's degree in chemistry, fluoride has been known as a toxic ion for many years. The main source of fluoride in aqueous solutions is minerals containing fluoride and the industrial activities of factories. According to the report of the Environmental Protection Organization, the amount of fluoride more than 1 mg/liter causes various diseases. In ...
Master's Thesis in Chemical Engineering, Process Design, Abstract: In this thesis, a method for thermodynamic analysis and evaluation of energy consumption of distillation tower by using side cooling is introduced. The research done in the past was aimed at the distribution of the heat diagram and checking the possibility of adding or extracting heat from all the different parts ...
Master's thesis in the field of chemical engineering (gas engineering trend) in recent years, many horizontal wells have been drilled around the world. The main reason is the ability to increase the level of the tank in contact with the well, which increases the utilization of the well. Well testing is used to identify the models of hydrocarbon reservoirs and to identify their ...
Master's Thesis in Nano Chemical Engineering Abstract The aim of this study is to separate cationic polyacrylamide from the waste water of Prodeh Tabas coal washing plant using the polymer membrane filtration process. The primary membrane was prepared using polyacrylonitrile (PAN) by phase inversion process, and then they were prepared using hydrolysis as chemical modification ...
Dissertation for M.Sc degree, field: chemical engineering, orientation: biotechnology, research method: first, the surface of the gold electrode was coated with nickel and cobalt salt in suitable conditions, then the standard solution of atrazine poison was placed in contact with the modified electrode, and after optimizing a series of mechanical and chemical parameters, its ...
M.Sc. Dissertation for Master Degree in Chemical Engineering - Process Engineering Abstract Mercaptans are removed from hydrocarbon streams by various methods. The use of caustic soda solution and mucoli sieve beds are among the most widely used methods. In the oil and gas industries of our country, washing with relatively dilute caustic solution is often used to remove light ...
Master's Thesis in the field of Chemical Engineering Abstract Investigation of parameters affecting the production of alumina gel by sol-gel method Sol-gel method is one of the common methods that is widely used to produce different nanoparticles. In this method, a solution of initiators is mixed with water in the presence of a catalyst, and hydrolysis and polymerization ...
Master's Thesis in Chemical Engineering (Gas Orientation) Abstract Laboratory Investigation of Gas Dehumidification Using Triethylene Glycol Solution in Hollow Fiber Membrane Contactors In this study, two hollow fiber membrane contactors with different types of Polyvinylidene Fluoride (PVDF) and Polypropylene (PP) fibers have been used for gas dehumidification by Triethylene ...
Master's thesis in the field of chemical engineering, abstract of the design of the Driso ring base and the use of hydrocarbon solvent in the dehumidification process in Farashband refinery, water vapor is one of the most important impurities in the flow of natural gas. Usually, the water vapor itself is not a problem, but instead the liquid or solid phase that forms when the ...
In order to obtain a master's degree in chemical engineering, abstract freezing of fans in operational units, including the hydrogen unit of Imam Khomeini Shazand Refinery in the cold seasons of the year is one of the important problems in this refinery. In order to provide a suitable solution to this problem, we must have a suitable estimate of the fan outlet temperature. The ...
Master's Thesis (M.Sc.) Direction: Process Design Abstract Currently, membranes have found a special place in different separation industries and have wide applications in different fields of separation, including liquid solutions and different gases. Membrane technology is one of the most widely used technologies in today's industry, whose field of application is wide ranging ...
Thesis for obtaining a master's degree. Abstract: The increase in environmental concerns and the progress of green chemistry processes have necessitated the replacement of homogeneous catalysts with heterogeneous ones. In this research, activated carbon was used as a suitable substrate due to its special properties. The most important of these properties are resistance in acidic ...
Presented to graduate education management as part of the academic activities required to obtain a master's degree in the field of mechatronics. Abstract As you know, air conditioner is a high consumption device and has a Freon refrigeration cycle. What drew the companies to the production of inverters was to solve the shortcoming of air conditioners in high energy consumption. ...
Master's thesis in the field: Chemical Engineering Abstract In this research, a comprehensive two-dimensional model based on the Finite Element Method (FEM) is proposed for modeling gas-solvent membrane contactors to remove carbon dioxide[1] from synthesis gas. Aqueous solution of monoethanolamine has been used as absorbent solvent stream and CO2/N2 gas mixture as gas stream. ...
Master's thesis in the field of chemical engineering, abstract of the laboratory study of iron oxide production on a microstructural scale using the precipitation method with supercritical anti-solvent by: One of the problems of cement used in oil wells, which are used to connect wall pipes and well walls, is that these cements do not have the desired resistance against high ...
Master's thesis in the field of chemical nanoengineering Abstract The synthesis of silicon dioxide nanoparticles from silicon oil waste using the synthesis method of silicon dioxide nanoparticles [1] has many industrial applications. The industrial use of these particles in traditional fields as well as new fields is expanding, for which new applications are continuously found. ...
Dissertation of the Ph.D course in Chemical Engineering, Biotechnology, Abstract: Clostridium Langali is a highly anaerobic estogenic bacterium that can grow on synthesis gas components, i.e. CO and H2/CO2, and convert them into ethanol and acetate at ambient temperature and pressure. During this process, the bacterium shows a complex metabolic pathway that includes both ...
A master's thesis in the field of chemical engineering, abstract of the laboratory study and modeling of calcium carbonate production from calcium chloride solution by absorbing carbon dioxide from industrial exhaust gases, by the efforts of Amin Alamdari, the effect of carbon dioxide concentration on the precipitation of calcium carbonate species and the kinetics of calcium ...
Master's Thesis in Chemical Engineering Abstract of Electrochemical Analysis of Formaldehyde Formaldehyde is one of the organic chemicals that is widely used as a raw material in many industries. Industrial effluents that contain high concentrations of formaldehyde must be treated before entering the environment due to its possible carcinogenic and mutagenic risks. The purpose ...
Master's Thesis in Chemical Engineering Abstract Vapor pressure is an important thermodynamic property in process equipment design and chemical engineering unit operation. Therefore, experimental vapor pressure data that cover the entire range of vapor pressure are very valuable, but due to the lack of accurate measurements for the vapor pressure of some materials near the ...
The master's thesis of precision instruments and automation in the oil industry. The introduction of the entire research is one of the important scientific, technical and economic topics, the issue of corrosion of metals and the protection of metal facilities. Investigating the topic of corrosion is not so simple and with all the research done, its factors are still not known ...
Doctoral Dissertation in Chemical Engineering Abstract With the increase in population, the need for energy resources for mankind has also increased. Diesel, as an effective fuel, fulfills the need for transportation fuel in the world. Biodiesel, which is considered a renewable fuel and produces less harmful environmental effects, is produced from various sources, among which ...
A master's thesis in the field of chemical engineering, abstract of biodiesel production from microalgae by supercritical carbon dioxide extraction method. In this research, different stages of biodiesel production from Chlorella vulgaris microalgae, especially the stage of oil extraction from it, were experimentally studied. The method of microalgae cultivation was selected ...
Master's Thesis in Chemical Engineering Abstract Simulation of dynamic surface tension phenomenon in solvent oil systems based on permeation process is one of the prominent processes in the field of increasing extraction from oil reservoirs, gas injection. Therefore, a correct understanding of the mechanisms and how these processes are carried out is a big step towards ...
Dissertation for obtaining a master's degree in the field of chemical nanoengineering Abstract In the uranium enrichment unit by centrifuge, UF6 gas after passing through the centrifuge and performing the enrichment process, enters the cold trap and is solidified and collected at a low temperature. One of the absorbents used to absorb uranium hexafluoride is sodium fluoride. The ...
Dissertation for Master's Degree in Chemical Engineering Abstract Critical characteristics for materials such as critical temperature, critical volume and critical pressure are important characteristics for predicting many thermodynamic properties of different materials. Knowing the critical properties plays an essential role in all hydrocarbon production and process operations. ...
Master's thesis in the field of chemical nanoengineering Abstract: Fabrication of ceramic nanofiltration membrane for chloride ion separation (case study: gas condensate) In this research, chloride ion separation using alumina-titania double layer nanofiltration membrane has been investigated. For this purpose, first, the alumina-titania double-layer membrane is made based on ...
Master's Thesis in Chemical Engineering (Process Simulation and Control) Abstract Modeling and Simulation of the Electrostatic Desalination Process of Crude Oil by Elham Ariafard The aim of this research is to model the desalination process of crude oil based on the population balance method. For this purpose, the one- and two-stage electrostatic desalination process, which ...
Master's degree thesis in the field of chemical engineering, thermokinetic and catalyst orientation. Abstract The purpose of this research is to estimate the electrical conductivity of natural waters based on modern mathematical methods. To achieve this, the waters of the Karaj and Jajrud rivers are considered as special cases. For this purpose, 20 sampling stations were ...
Dissertation for M.A. degree. ""Trend of Biotechnology"" Abstract Today, due to the reduction of fossil fuel sources and the destructive effects of these types of fuels on the environment, researchers are thinking of replacing them. In recent years, biodiesel fuel is considered the most suitable alternative to diesel fuel due to its renewable nature and less pollution. The ...
Master's thesis in the field of chemical engineering without major. Abstract: Modeling, simulation and optimization of Jam Petrochemical Check Bed Reactor for hydrogenation of 1 and 3-butadiene. Therefore, a suitable kinetic model has been selected as a basic structure for modeling the reactor, and after that the presented model has been developed in order to match the molar ...
Master's thesis in the field of chemistry, Analytical Chemistry, Abstract In this project, a molecular template polymer was prepared for the selective extraction of furan. To prepare this polymer, methacrylic acid (functional monomer), ethylene glycol dimethacrylate (cross-linking agent), 2,2-azobisisobutyronitrile (initiator), a mixture of pyrrole (furan substitute or target ...
Dissertation for receiving a master's degree in chemical engineering, advanced orientation. Abstract The limitation of heat transfer fluids in various industries due to their poor thermal conductivity has caused the improvement of the heat transfer of working fluids to be considered as a new method of advanced heat transfer. So that the idea of ??dispersing solid particles in ...
Master's Thesis in Chemical Engineering Abstract: The purpose of this thesis is mathematical modeling of rotary dryer for drying dicalcium phosphate. In this project, with different temperature conditions and different number of cycles of the dryer, the moisture level of the product exiting the dryer has been checked. As a result, 100 data have been obtained from the output of ...
Master of Mechatronics Abstract As you know, the air conditioner is a high consumption device and has a Freon refrigeration cycle. What drew the companies to the production of inverters was to solve the shortcoming of air conditioners in high energy consumption. To improve energy consumption in every part of the industry, one should pay attention to several parameters, it is ...
Dissertation for Master's Degree in Advanced Chemical Engineering Abstract A new method based on point cloud extraction to extract uranium from water samples and its measurement using alpha spectrometry based on liquid scintillation has been investigated. Uranium extraction from water samples in the presence of a number of available surfactants and chelating reagents has been ...
Dissertation for receiving the master's degree ""M.Sc."" Chemical engineering trend, thermodynamic and synthetic engineering Abstract In this study, the modeling of dilute acid hydrolysis of walnut green skin as a sample of lignocellulosic material to produce fermentable sugar in the bioethanol process has been studied. The four parameters of temperature, time, acid ...
Dissertation for Master's Degree in Chemistry, Chemistry, Abstract: Epoxy resins, which are thermosetting polymers, have properties such as high thermal stability, good adhesion, high chemical resistance, easy molding, and moisture resistance. These resins are used as adhesives, coatings, paints and polymer tools. The most common epoxy resin is prepared from the reaction of ...
Dissertation for M.Sc Master's degree, specialization: process engineering, abstract of the proposed project, the feasibility of converting gas condensates into products with higher added value and consumable fuels such as gasoline. Considering the huge gas and oil reserves in Iran, this country is one of the major importers of gasoline. Therefore, it is very necessary to ...
Dissertation: To obtain the degree of professional doctor of veterinary medicine (D.V.M.) Farsi abstract title: Evaluation of the total dissolved solids (TDS) factor in the drinking water of poultry farms in Piranshahr city. Water is considered one of the most important chemical substances in terms of biology and exists in solid, liquid, and vapor forms in nature. Water is one ...
Master's Thesis in Polymerization Engineering Abstract In this research, the thermal and catalytic pyrolysis of four types of polymers such as heavy polyethylene and polypropylene and two styrene butadiene rubber and polybutadiene rubber in a semi-continuous stirred reactor under nitrogen gas and using HZSM-5, FCC and H-Mordenite catalysts has been investigated. In this study, ...
Dissertation for Master's Degree (M.Sc.) Orientation: Environment Abstract Based on the studies conducted, there are various processes for desulfurization of naphtha, which determine the method of desulfurization of naphtha, there are very determining parameters, and the type of sulfur compounds and operating temperature and pressure are one of the most important parameters that ...
Persian summary of the cheese plant with the scientific name of Malva Ngalkata is native to Central Asian countries. In Iran, paneerak grows in different regions, including Kurdistan, Azerbaijan, Alborz, Tehran and Khorasan provinces. In traditional medicine, cheese plant has many therapeutic benefits and uses, such as reducing muscle and nerve pains, healing wounds, relieving ...
Dissertation for M.Sc degree in food science and industry Abstract Oils and fats are oxidized during storage at high temperatures and their nutritional quality decreases. The process of oxidation of oils and fats and the formation of free radicals causes the development and development of cancer. These damages can be prevented by consuming antioxidant compounds found in fruits ...
Master's thesis in the field of mechanical engineering - energy conversion trend Abstract: In this research, the turbulent flow of a non-Newtonian nanofluid in a microchannel with a circular cross-section is simulated. First, the types of classification of microchannels, the methods of making microchannels, as well as the advantages and challenges of using microchannels are ...
Master's thesis in the field of electrical-electronic engineering Abstract of the construction of a humidity sensor using carbon nanotubes Today, humidity sensors have many applications in various fields, including environmental control processes, household applications, automotive industry, medicine, agriculture and chemical industries. Until now, various structures have been ...
Abstract Photovoltaic or PV for short is one of the types of electricity generation systems from solar energy. In this method, by using solar cells, direct production of electricity from sunlight becomes possible. Solar cells are semi-conductors that are made of silicon, the second most abundant element in the earth's crust. When sunlight shines on a photovoltaic cell, a ...
Dissertation for Master's Degree in Medical Nanotechnology Abstract Choline is one of the constituents of phospholipids and plays an important role in fat metabolism. It is also necessary for the formation of acetylcholine, which is involved in the transmission of nerve impulses. Lack or increase of choline in the body causes complications and diseases in humans; Therefore, it ...
Dissertation for M.Sc Mechanical Engineering - Energy Conversion Orientation Abstract: In this research, the turbulent flow of a non-Newtonian nanofluid in a microchannel with a circular cross-section is simulated. First, the types of classification of microchannels, the methods of making microchannels, as well as the advantages and challenges of using microchannels are stated. ...
Dissertation for Master's Degree in Agricultural Engineering, Food Science and Technology, Food Technology, Abstract The purpose of this study was to investigate the antimicrobial effect of cactus seed extract as an alternative to chemical preservatives on the chemical, microbial and sensory characteristics of French salad dressing. The tested treatments are French sauce ...
Dissertation for Master's Degree in Energy Systems Engineering Abstract Currently in Iran, there are many gas turbines producing electrical energy whose efficiency is around 30% to 40% depending on the environmental and functional conditions, in fact two thirds of this energy from fuel combustion is wasted through exhaust fumes and thermal waste. In order to increase the ...
Dissertation for obtaining a doctorate degree in the field of mechanical engineering - manufacturing and production: the advantages of using semi-solid processes are reducing the amount of gas porosity and shrinkage and modifying the microstructure, which aims to improve the mechanical properties of the part. In this research, the cooling ramp method has been used to produce the ...
Master's thesis in the field of agricultural engineering - food science and food industry - food chemistry. Abstract of the research: In this research, strong electric fields with short square pulses and a time scale between microseconds and milliseconds were used to sanitize liquid foods, and food products were processed under environmental conditions or low temperatures and ...
Introduction Since ancient times, energy supply has been a very important issue for human societies. In today's era, due to the industrial and technological advances that have a very important place in the daily life of people, the importance of the problem is manifested in a more obvious way. But the common sources of energy production, which are mostly non-renewable, will be ...
Dissertation: To receive the degree of professional doctor of veterinary medicine (D.V.M.) Farsi abstract Title: Investigating the contamination of drinking water of broiler farms in Piranshahr city with Escherichia coli bacteria Drinking water is one of the vital and nutritious factors that is necessary for optimal growth and control of body temperature and should always be ...
Abstract This research was conducted in order to investigate the absorption characteristics of cobalt, cadmium and nickel metals using lemon peel. The effect of different parameters such as solution pH, amount of adsorbent, contact time and temperature on the absorption process was investigated and the optimal operating conditions for the absorption of each element on the ...
Master's Thesis of Energy Conversion Mechanical Engineering Abstract In recent years, due to the importance of finding energy, global warming and environmental pollution and its production sources, and the growing need of various industries for various forms of energy, as well as the large volume of its consumers around the world, the need to provide models to optimize energy ...
Master's Thesis of Precision Instrumentation and Automation in the Oil Industry. Abstract: Corrosion rate prediction and wear rate constant in gas brain tube using neural network is a phenomenon that is very complex due to the influence of various factors and cannot be modeled easily. In order to predict and model corrosion, attention is paid to its physical, chemical and ...
Effects of hormones and explants on calligenesis, regeneration and cell suspension culture in fennel (Foeniuculum vulgare) Introduction: Fennel (Foeniuculum vulgare) is a herbaceous, stable, aromatic plant from the family of Chetrian, which is used for food and medicine in different regions of Iran. Considering the importance of the compounds of this plant in the pharmaceutical ...
Abstract: Research in the field of heat transfer of suspensions with nanometer-sized solid particles in the base fluid has started in the last decade. Recent research in the field of nanofluids has shown that the addition of nanoparticles causes a significant increase in the heat transfer of the suspension. Another common way to improve the thermal performance of devices is to ...