Download more than 100 examples of thesis, proposal and project topics about linear dynamic analysis in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Dissertation for Master's Degree in Mechanical Engineering (Applied Design) Abstract: Electromechanical micro and nano systems have been noticed due to their distinctive features and unique characteristics, mainly in the two fields of sensors and sensors, in various sciences such as mechanics, aerospace and medicine. Electrostatic stimulation is one of the simplest and most ...
Thesis of master's degree in civil engineering, soil and foundation mechanics orientation, September 2019, abstract: analysis of dynamic interaction between soil and structure (due to the mutual effect of the structure and its retaining soil on each other), D
Dissertation for master's degree in civil-structural field winter 2012 Abstract In recent years, the number of buildings that have suffered damage due to the loss of their gravity-bearing members has increased. Therefore, it has become important to design structures so that they are resistant to progressive damage in addition to the effects of earthquakes. One of the factors ...
Dissertation for receiving a master's degree in the field: civil engineering, orientation: structure. Abstract: In this paper, a new approach for optimal selection of acceleration maps and their scaling to perform dynamic time history analysis, to achieve the average response spectrum that has a suitable match and a small distance with the target spectrum and represents the ...
Dissertation for Master's Degree in Civil Engineering, Marine Structures, Abstract: Tension-based platforms are among economic marine platforms for use in deep waters. The correct prediction of the platform's dynamic response to environmental loads is very important in its economic and safe design. In this research, the dynamic behavior of the tension base platform under the ...
To obtain a master's degree in the field of civil engineering - structural orientation. Abstract: The subject of this research is to investigate the level of performance and accuracy of methods based on non-linear static analysis and the need to retrofit steel buildings with a dual system of bending frame with cross brace and convergent 7-shaped brace designed with the 2800 Iran ...
Dissertation for master's degree in Applied Design-Dynamics and Control Abstract: Transverse instability is one of the common problems in high-speed rail vehicles, which occurs on rails without arches and due to the friction-creep nature of wheel-rail contact that creates non-conservative forces in the system. This phenomenon is called hunting, which is a type of ...
Presented to obtain a master's degree in the field of mechanical engineering-applied design orientation. Abstract In this research, we investigated the free vibration of a cracked beam and found its natural frequencies. In the first part, by using the open crack model, by modeling the cracked part as a beam-shaped element and satisfying the boundary conditions, we obtained the ...
Dissertation for Master's degree (M.Sc) in the field of electrical-power engineering. Abstract In this thesis, the design of a resistant controller in power electronic circuit breakers and its comparison with linear control methods have been examined. The main goal of research and development in this field is always to find the most suitable control method in order to implement ...
Dissertation for Master's Degree > Direction: Hydraulic Structures Abstract: One of the assumptions that is made to simplify the dynamic analysis of the existing weighted concrete dams is the uniformity of the foundation in terms of physical parameters such as modulus of elasticity and damping. This is despite the fact that, in practice, different geological conditions may ...
Dissertation for receiving the master's degree ""M. Sc."" Field: Agricultural Engineering Major: Water Structures Abstract The sediment transfer process is a completely complex, variable and non-linear phenomenon. So that the behavior of the river in the sediment transfer capacity for a certain discharge is different in different times. Therefore, due to the complexity of the ...
Dissertation to receive M.Sc degree in civil engineering, structural orientation. Abstract: One of the ways to strengthen the building against lateral loads is the use of a wind system (convergent or divergent). The increasing use of steel braces to deal with earthquake forces requires that the seismic performance of these types of systems be given more attention. The common ...
Dissertation of the master's degree in the field: Electrical Engineering - Power trend. Abstract Today, despite the wide use of sensitive loads such as power electronics, computers and non-linear loads in distribution networks, the issue of power quality has received more attention. Most of these loads are sensitive to voltage changes, such as undervoltage and overvoltage, and ...
Department of Business Management Thesis for Master's degree (M.A.) Abstract Today, all managers in all organizations want to make optimal use of the facilities and capacities available in different departments. Therefore, the existence of a model to provide feedback in order to improve various branches of organizations and to obtain a tool to meet the needs of managers seems ...
Master's Thesis in Mechanical Engineering (Applied Design): Abstract of the analysis of leading damage in pin connections of composite materials. The purpose of this research is to analyze the leading damage in pin connections of composite materials. To do this, finite element software ABAQUS and FORTRAN programming have been used. The contact between the composite plate with ...
Submitted for Master's Degree Submitted for Master's Degree Abstract In addition to lateral instability, one of the major threats to passenger cars, especially SUVs, is the risk of overturning. In this thesis, a coordination strategy based on fuzzy logic is designed for the integrated operation of active steering, differential, brake and anti-roll bar subsystems. Separate ...
Abstract The main purpose of the research is to investigate the relationship between business strategy and profit quality in companies admitted to the Tehran Stock Exchange market. The statistical sample of the research includes 145 companies accepted in Bo
Abstract The main purpose of the research is to investigate the relationship between business strategy and profit quality in companies admitted to the Tehran Stock Exchange market. The statistical sample of the research includes 145 accepted companies
Dissertation for obtaining a master's degree in civil engineering. 2013 Winter Earthquake Abstract of earthquakes close to the fault due to having pulse type movement with a long period at the beginning of the record, including
Dissertation for obtaining a master's degree in civil engineering – Spring 2014 structure trend, first chapter, general research 1-1- Introduction: Mostly structures for severe earthquakes and surface acceptance
Dissertation of master's degree in structural engineering, February 2011 Abstract: In the optimal civil engineering structure construction for static loadings have been significantly developed. But, in
Dissertation of Master's Degree in Civil Engineering – Earthquake Engineering 2013 Abstract: Concrete beam and slab bridges with neoprene supports are among the most common highway bridges in the country.
Master's Thesis in Civil Engineering - Structural Orientation, February 2013 Abstract: The performance of a building during an earthquake depends on many factors, as a result, predicting the seismic performance of structures should be considered either explicitly or implicitly as part of the design or evaluation. Predicting the seismic response of the structure is very ...
Dissertation for Master's Degree in Educational Research Abstract The purpose of this research was to investigate the effectiveness of the educational objectives of the in-service training courses of Refah Bank in Hormozgan province, which was sampled by 150 employees of Refah Bank branches in Hormozgan province. The two tools used in this research include a) a 50-question ...
Dissertation for Master's degree (M.A.) orientation: industrial and organizational, examining the relationship between knowledge management and marketing related to customer relationship management among bank employees in Sepidan city. Abstract The purpose of this research was to explain the relationship between knowledge management and marketing related to customer relationship ...
Master's thesis in the field of natural geography, climatology and environmental planning, abstract human civilization is based on the stability of climatic conditions, therefore climate change can be considered a threat to human civilization. In recent years, climate scientists have tried to trace these changes for some climatic elements, the most important of which is ...
Dissertation for M.A. Degree: Clinical Psychology Abstract Objective: The present study compares active schemas in depressed subjects with anxious subjects in non-profit Azad University students of Rasht city. The research method is correlational and post-event, comparative and cross-sectional. The statistical population of this research was all the people who studied in the ...
Dissertation for Master's Degree (M.A.) Orientation: ""Strategic"" Introduction Today, the need for proper planning is clear in order to correctly estimate the time and cost of the project and the amount of resources required in a project, which have a direct impact on the implementation, administration and proper exploitation of projects such as dam construction and building. ...
Master's Thesis in the field of electrical engineering- control, abstract assessment of the transient stability of power systems using the data of phasor measurement units, quick assessment of security in power networks in emergency situations and the occurrence of various errors, is a vital thing to prevent collapse and create nationwide outages. Therefore, the evaluation ...
Dissertation for Master's Degree (M.A) in Sports Management Abstract: In recent years, organizational citizenship behaviors as extra-role behaviors of employees have received much attention due to the significant effects they have had on the effectiveness and success of organizations. Identifying and strengthening the areas of occurrence of such behaviors improves the ...
Master's Thesis in Civil-Structural Engineering Abstract In order to estimate the capacity of buildings, it will be much easier and less expensive to use static methods instead of incremental dynamic methods. Although the incremental dynamic method gives more accurate and closer answers to the real behavior of the structure, its high cost and time has increased the desire to use ...
Master's Thesis of Public Administration, Information Systems, Abstract: Working environments are changing significantly, and the demand for high-quality goods and services is increasing. In order for organizations to maintain their competitive position in the face of such pressures, quality is considered a vital factor. Maybe the first step for companies to be competitive is to ...
Dissertation for Master's Degree Abstract: Dealing with external forces such as earthquakes is one of the most important missions of civil engineers. In order to achieve this goal, the light metal frame system, which has advantages such as the possibility of industrial production, prefabrication and lightness, can be considered as a suitable alternative to traditional systems. ...
Dissertation for Master's Degree in Civil Engineering, Structures, Abstract: This thesis is the results of a numerical and parametric study on the effect of reinforcing reinforced concrete shear wall with FRP composite and applying the results of the finite element method. The finite element program is compared and calibrated against experimental data. Then, the numerical ...
Dissertation for master's degree in civil engineering, structural orientation. Abstract: Today, in earthquake-prone countries, it is recommended to use a variety of energy-depleting tools in order to dissipate the energy of earthquakes on the structure. One of these tools is rotational friction dampers. Because the current regulations do not provide a value for the coefficient ...
Dissertation for Master's degree (M.S) Chapter 1 History of dynamic analysis of liquid storage tanks and regulatory orders in this regard Abstract The main goal of this research is to investigate the effect of the presence of seismic isolators on the dynamic performance of liquid storage tanks during an earthquake. In this regard, it is necessary to first know the dynamic ...
Master's Thesis Field: Civil Engineering Abstract Bridges are inseparable members of the means of communication and are very influential in economic and social conditions. The passage of time and random loads are among the things that threaten the health of bridges. Abnormal loads caused by natural accidents, execution errors and some other issues can cause progressive collapse ...
Dissertation for Master's Degree in Mechatronics Engineering Persian Abstract The purpose of this project is to introduce a new approach for troubleshooting gas transmission pipelines using mechanical waves, which is much cheaper and easier than other methods. who are currently working. These lines are usually located in difficult environmental conditions and far away and in ...
Dissertation for receiving a master's degree in the field of civil engineering in the field of earthquakes. Abstract: The introduction of damage generators is very close to the concept of inelastic behavior and, as a result, hysteresis energy. Therefore, it can be said that the hysteresis energy at these levels can be a significant criterion for the design or control of the ...
Dissertation for receiving a master's degree (Sc..M) field: civil engineering, specialization: structure, abstract: In recent years, the subject of seismic isolation has been particularly focused on the seismic design of buildings. The main purpose of this work is to isolate the structure from the ground instead of using conventional retrofitting methods The equipment used in ...
Master's thesis in the field of civil engineering - hydraulic structures Abstract: Rivers are one of the most important and common sources of drinking, agricultural and industrial water supply. These resources have many qualitative fluctuations due to passing through different platforms and direct connection with the surrounding environment. Therefore, predicting the quality of ...
Dissertation of the master's degree in the field: civil engineering - structure, page 1-1-problem definition: In the science of structural engineering, there has always been an attempt to predict a set of events that will have a significant effect on the efficiency and endurance of the structure during its useful life. These factors should be considered by the design engineer ...
Dissertation for receiving a master's degree in the field of civil engineering, structure orientation. Abstract: Today, many reinforced concrete structures that are in operation are more than 75 years old and have been damaged due to natural disasters such as earthquakes and wind, or due to material fatigue or corrosive factors. Maintenance of structures is very important due to ...
A master's thesis in the field of civil engineering - hydraulic structures Abstract Liquid storage air tanks are used not only to store water, but also to store chemicals and toxic substances in different forms. Considering the use of these structures in civil and urban development and industrial networks, their importance is determined before and after the earthquake. The ...
Dissertation for Master's Degree in Special Care Nursing Introduction: Today, the prevention and treatment of traumatic injuries is a fundamental problem of public health. Optimal management in the care and treatment of these patients can greatly reduce the occurrence of secondary injuries and the death and disability of these patients, and reduce the economic costs and social ...
Dissertation for Master's Degree in Nursing Education (Community Health Orientation) Abstract Introduction: Health as one of the main metaparadigms of health theories is next to the concepts of human, environment and nurse; And it has objective and mental dimensions, unfortunately, less attention has been paid to its mental dimension. The mental feeling of well-being is a ...
Master's Thesis in Mechanical Engineering - Applied Design Abstract In recent years, most of the researches have been focused on compressive and combined loading in order to investigate the buckling of nanotube structures, and for this purpose, the work done on tensile loading is very limited. Since the results of compressive and tensile loading in carbon nanotubes are ...
Master's Thesis in Mechanical Engineering, Applied Design, Abstract: Microelectromechanical systems are generally classified based on the type of their excitation mechanism. In addition to electrostatic excitation, which is considered as one of the most important excitation mechanisms, thermal excitation is widely used in multi-layered and functionally variable ...
Master's Thesis in the field of Electrical Engineering - Control Abstract Evaluation of the transient stability of power systems using the data of phasor measurement units by the efforts of Hanieh Mohammadi Rapid evaluation of security in power networks in emergency situations and the occurrence of various errors is a vital thing to prevent collapse and create nationwide ...
Doctoral thesis of electrical engineering - Power Abstract Islanding of interconnected power systems, which is also known for isolating and breaking power systems, is the last line of defense to deal with the collapse of the system and prevent catastrophic incidents in the power network. The islanding of interconnected power systems is presented as an extensive control method as ...
Master's Thesis in Mechanical Engineering (Applied Design) Introduction The question of the generating factor has always been raised as a dynamic question in all fields of science. Due to the complexity and unforeseen factors and the lack of all-round human mastery over physical issues, it has not been possible to identify the causative factor in many cases, therefore, due to ...
Dissertation for M.Sc. The tendency of the abstract power transmission networks of modern power systems is increasingly changing due to the increase in demand and limitations in the construction of new lines. One of the consequences of such a stressed system is the risk of losing stability after a disturbance. Flexible alternating current transmission systems (facts) are very ...
A master's thesis in the field of mechanics, applied design, abstract. These two characteristics are caused by phase transformations under different thermodynamic loadings. Depending on these two mentioned features, memory alloys can be used as actuators in different forms. These structures can be used in different fields such as medicine, aerospace, knowledge
Dissertation for Master's Degree in Energy Conversion Mechanical Engineering Abstract: Fluid propulsion vector orientation has emerged as an important technology for high performance air vehicles. This technology can improve the maneuverability of the aircraft by changing the nozzle flow and its deviation from its axial direction. The purpose of this study is to investigate the ...
Dissertation for M.Sc Mechanical Engineering - Energy Conversion Trend Abstract In the last century, with the increasing demand for energy and the reduction of fossil fuel resources, the role of renewable energy in the progress and development of countries is not hidden from anyone. In the meantime, wind energy has a special share and has the highest growth rate among other ...
Master's thesis in the field of mechanical engineering - applied design approach. Abstract: Identifying the stiffness and damping coefficients of a beam support. By: Majid Abedi. Supports and connections play a fundamental and important role in engineering structures. It is necessary to identify different support parameters. Stiffness and damping parameters are the most ...
Master's Thesis of Energy Systems Optimization of Steam Network in Shiraz Oil Refining Company, the costs of power supply and required power of operational processes take up a significant part of the financial resources and costs of every industrial complex, and the continuous supply of required energy is always one of the main concerns of industrial designers and managers. The ...
Abstract Changing the parameters in an industrial process causes the process to go out of its optimal working point. This change, in turn, will reduce the efficiency of closed-loop controllers that are designed for the optimal operating point of the system. Therefore, it is necessary to first detect and identify these changes as a defect and then correct the system behavior by ...
Master's thesis in the field of mechanics, specialization: mechanical engineering - energy conversion. Abstract: One of the most important components of fluid transmission systems are control valves, which can be seen in different routes of oil and gas transmission pipelines, etc. In control valves, the most important issue is the property of the flow in order to achieve the ...
Master's Thesis on Car Structure and Body Abstract In recent years, many researchers have allocated their attention to a special category of materials, memory materials. The ability to absorb and control vibrations actively or passively, respectively, is affected by the features of shape memory and hysteresis energy loss caused by the pseudo-elastic characteristics of these ...
Master's Thesis in Mechanical Engineering (Applied Design) Abstract of three-dimensional interlayer stress investigation in mechanical connections in layered composite materials The purpose of this thesis is to investigate three-dimensional interlayer stresses in mechanical connections in layered composite materials. For this purpose, finite element method and ABAQUS software ...
Master's thesis in the field of civil engineering, structural orientation. Abstract In this study, the evaluation and comparison of nonlinear and numerical analysis of deep reinforced concrete beams with openings without reinforcement with deep concrete beams with openings reinforced with FRP sheets and deep reinforced concrete beams without openings by Abaqus finite element ...
Master's thesis in the field of civil engineering, soil and foundation, today, due to the progress of the tunneling industry, the need to analyze and design underground structures in rocky environments is felt more than in the past. Although there are many numerical and practical software available in this field, none of them are complete and perfect in all fields, and each of ...
Master's thesis in the field of electrical engineering - power abstract of the possible analysis of dynamic stability of microgrids, considering wind turbines, in recent years, the high penetration of renewable energy sources, especially wind energy, in power networks has created new problems. One of the most important issues is the uncertainty in the power produced by wind ...
The thesis for obtaining a master's degree in the field of mechanics, investigating and analyzing the free and forced vibrations of a multi-walled carbon nanotube placed in an elastic medium in order to achieve a clear mathematical understanding of the behavior of different walls of the nanotube under the influence of van der Waals forces and the elastic medium is one of the ...
Dissertation for M.Sc Master's Degree, Mechanical Engineering - Applied Design Abstract Modern wind turbines today tend to vibrate a lot due to their elastic, long and narrow structure. Therefore, all components of wind turbines should be subjected to vibration and modal analysis in the design stages, and their natural frequencies should be reviewed with turbine excitation ...
Dissertation for Master's Degree in Rock Mechanics Introduction Excavations made in rocks have different dimensions according to their purpose and vary from small dimensions to dimensions comparable to huge concrete structures. Surface excavations can be used as a space for extracting mines, creating buildings, and supporting and overflowing dams, factories, power plants, as ...
Master's Thesis in Mechanical Engineering - Applied Design Abstract of elastoplastic analysis of thick-walled tanks made of targeted materials with linear kinematic stiffness behavior under cyclic loading, stress analysis and deformation of spherical thick-walled tanks made of subject materials under internal pressure loading and temperature difference are discussed in this ...
Dissertation for M.Sc. Mechanical engineering trend - applied design In this research, a wind turbine with a vertical axis of the Savonius model is modeled. The wind turbine has been modeled in the fluid control volume, which is the same as the wind tunnel in real conditions, and has been investigated under wind blowing with different speeds. Also, in terms of overlap ratio, it ...
Dissertation for Master's Degree in Mechanical Engineering, Applied Design, Abstract: Microbeams are used as the main element in most sensors and actuators. In some cases, such as micro switches, this member may also be used in an environment containing fluid. Therefore, in this article, we analyzed the dynamic behavior and frequency analysis of a micro beam that is located in a ...
Dissertation for the Master's degree ""M.Sc"" in Mechanical Engineering - Energy Conversion. Abstract In this thesis, experimental analysis along with numerical simulation has been carried out to investigate the performance of Savunius vertical axis wind turbine. In order to carry out the tests, the turbine was tested in the subsonic wind tunnel. In order to check the accuracy ...
Dissertation for Master's Degree in Civil Engineering (M.Sc) Orientation: Structure Winter 2013 Abstract: Resilient construction of important government buildings, infrastructure facilities and vital arteries due to the increase
Dissertation for receiving master's degree (M.A) in regional planning orientation, winter 2013 Abstract: Today, many researchers pay attention to the role of tourism in economic and social development
Dissertation for obtaining a master's degree in industrial management (production orientation) (case study of universities in Semnan and Golestan provinces) Summer 2011 Abstract: In the world economic system and increasing competition