Download more than 100 examples of thesis, proposal and project topics about laboratory investigation in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Dissertation for Master's Degree in Civil Engineering, Soil and Foundation Mechanics Abstract: Since many structures are built in dense urban areas, there is an increasing need to build buildings and geotechnical structures on soft clay soils. Clay soils usually show significant creep deformation. Although a lot of research has been done on the creep behavior of natural clay, ...
Master's Thesis on Hydraulic Structures Abstract: Washing water around the existing structures in the flow path is one of the important issues that should be considered in the design of such structures. For this purpose, the investigation of this phenomenon around the circular bases in the condition of clear water was carried out in laboratory physical modeling. For this ...
Master's Thesis in Chemical Engineering (Gas Orientation) Abstract Laboratory Investigation of Gas Dehumidification Using Triethylene Glycol Solution in Hollow Fiber Membrane Contactors In this study, two hollow fiber membrane contactors with different types of Polyvinylidene Fluoride (PVDF) and Polypropylene (PP) fibers have been used for gas dehumidification by Triethylene ...
Dissertation for a master's degree in civil engineering, soil and foundation mechanics. Abstract: Since many structures are built in dense urban areas, there is an increasing need to build buildings and geotechnical structures on soft clay soils. Clay soils usually show significant creep deformation. Although a lot of research has been done on the creep behavior of natural clay, ...
Doctoral dissertation in civil engineering – Earthquake Engineering 2013 Abstract The inappropriate performance of columns in concrete buildings designed and built in the past years causes concern and attention to the amount of A
Dissertation to receive the master's degree ""M.A."" February 2013 Persian sources Abstract The purpose of this research was to compare the effect of real and virtual laboratory on learning experimental sciences. society
Dissertation for Master's Degree in Civil Engineering - Structures Abstract: One of the important problems in seismic design and implementation of buildings is the significant dead weight used in it. Therefore, in the case of using lightweight concrete that has favorable mechanical properties, significant benefits can be obtained, including a reduction in dead load and ...
To receive a master's degree in civil engineering - water Abstract: Relaxation ponds should be designed in such a way that they can depreciate the potential energy stored in the reservoir water of dams and dams in such a way as to transfer it to the natural bed so as not to cause the loss of the bed and in critical conditions to destroy the pond and dam itself. In different ...
Abstract: Hydraulic jump is one of the amazing hydraulic phenomena that consumes the kinetic energy of water. Hydraulic structures such as relaxation ponds mainly use this important property of hydraulic jump to consume energy downstream of overflows, rapids and valves. The dimensions of these structures are directly dependent on the characteristics of hydraulic jump, therefore, ...
A master's thesis in the field of electrical engineering - field telecommunications, abstract, investigation and analysis of leaf reflective structures in the field of plasmonics for the application of passive components in the design of optical integrated circuits, limits the diffraction limit of the miniaturization of optical elements. Surface plasmon polaritons that propagate ...
Master's Thesis of Islamic Arts, metal specialization Abstract: Art suffered stagnation and decline in the early centuries of Islam's arrival in Iran due to the instability of the governments. However, the 3rd to 5th centuries of Hijri were a fruitful era in all cultural aspects including Islamic art. This part of history played a significant role in the formation, expansion and ...
Dissertation for Master's Degree in Civil Engineering, Hydraulic Structures, Abstract: It is obvious that water resources are essential for the life of living organisms and especially for human life. Drainers are a set of structures that are used to transfer water from the dam lake to the discharge point downstream. Therefore, due to the importance of this part of the dam, the ...
Doctoral thesis in the field of chemical engineering abstract theoretical and experimental investigation of the continuous process of desalination of heavy crude oil using microwaves and ultrasonic waves Desalination of crude oil is the first step in oil refining, by which the undesirable compounds with the oil are separated before they reach the main unit. In order to reduce ...
Master's Thesis in Soil Science Abstract: Today, tracking in water and soil issues has found a much wider application compared to the past. Examining the hydraulic connection and hydrodynamic characteristics of underground water tables, evaluating the origin and spread of pollution are among the most important applications of this method. In our country, along with the ...
Master's Thesis in the field of electrical engineering - field telecommunications, abstract, investigation and analysis of leaf reflective structures in the field of plasmonics for the application of passive components to Omidreza Daneshmandi's effort in designing optical integrated circuit limits the diffraction limit of miniaturization of optical elements. Surface plasmon ...
Master's Thesis, Energy Conversion Engineering, Abstract: In many processes in the industry, the combination of liquid droplets with gas flow will lead to problems such as corrosion of downstream equipment and loss of expensive liquids. To solve these problems, the phases are separated from each other with the help of a separator. Cyclone separators, as a type of high efficiency ...
Master's Thesis in Mechanical Engineering (Energy Conversion) Abstract Numerical investigation of the effect of microstructures on heat transfer and fluid mixing in microchannels, the need for high heat transfer from electronic packages and optical systems, etc., has created a challenge in the field of thermal management. In this context, microchannel heat wells play a great ...
Master's Thesis in Mechanical Engineering - Energy Conversion Abstract The vortex tube is a simple mechanical device that has no moving parts and is one of the equipment used in the refrigeration system, in which a high-pressure fluid enters the vortex tube through the inlet nozzles and splits into two streams with a lower and higher temperature than the inlet temperature, thus ...
endname? Rasht Master's Degree: Civil Engineering (M.S.C.) Focus: Hydraulic Structures Academic Year 2011-2012 Summary of the Minab River, the most important river of Khan? The fresh water is in Hormozgan province. this river
Dissertation of master's degree in civil engineering, structural orientation, October 1390, first chapter of generalities. 1-1 Introduction In recent years, there have been many advances in the field
Dissertation for M.A. Orientation: Natural Geography (Geomorphology-Hydrology) Abstract The increasing population growth followed by the development of industrial activities on the one hand and non-compliance with environmental requirements on the other hand, has caused huge amounts of pollutants to enter the environment in the last few decades. Accumulation of some dangerous ...
Dissertation for master's degree in electrical engineering, power orientation. Abstract The limitation of fossil fuel resources and the possibility of running out of fossil energy reserves, global warming, environmental pollution, price instability, as well as the increasing need of industrial and urban centers for energy, have made the international community think of suitable ...
Master's Thesis in the field of electrical engineering- control, abstract assessment of the transient stability of power systems using the data of phasor measurement units, quick assessment of security in power networks in emergency situations and the occurrence of various errors, is a vital thing to prevent collapse and create nationwide outages. Therefore, the evaluation ...
Abstract The main task of the synchronous generator excitation system is to provide the necessary voltage for the generator excitation winding. The excitation voltage is a dc voltage and it is used to create a flux in the excitation winding of the generator and consequently to produce a magnetic field to produce electrical energy by a synchronous generator. In the provided ...
In order to obtain a master's degree in the field of civil engineering - soil and foundation orientation, Abstract Nowadays, circular foundations are more or less used for structures, especially structures that have axial symmetry. In this research, a numerical study was conducted on bearing capacity and settlement of annular foundation. PLAXIS software was used for modeling. ...
Doctoral Dissertation of Soil and Foundation Mechanics Abstract In this research, the discrete element method was used to analyze the wave propagation and investigate the factors affecting the wave speed in granular soils. The method of separate elements is important due to the possibility of preparing completely similar samples and checking the effect of changes of a certain ...
Master's thesis in the field of civil engineering (environmental engineering) is an abstract of the surface absorption method, one of the effective methods for removing metals, including nickel metal. In this research, modified rice paddy has been used as absorbent material. Since this adsorbent is a natural material with a high contact surface, in addition to its high ability ...
Master's Dissertation of Discontinuous Structure Abstract: In recent years, the use of composite material in the construction and strengthening of structures has expanded greatly. The structure of this material is such that there is a possibility of crack formation between the layers. Due to the increase in load, these cracks grow and cause a sharp drop in the strength and ...
Dissertation for Master's Degree Abstract: Dealing with external forces such as earthquakes is one of the most important missions of civil engineers. In order to achieve this goal, the light metal frame system, which has advantages such as the possibility of industrial production, prefabrication and lightness, can be considered as a suitable alternative to traditional systems. ...
Master's thesis in the field of civil engineering (hydraulic structures) abstract of sediment transfer and sedimentation, the consequences such as the creation of sediment islands in the river path and as a result the reduction of flood flow transfer capacity, corrosion of river structures and It includes other problems. Also, suspended sediments affect the quality of water for ...
Master's Thesis Department: Civil Engineering (MSC) Specialization: Hydraulic Structures Abstract Minab River is the most important freshwater river in Hormozgan Province. This river is the drainage of the surface waters of the Minab catchment area, and two bridges have been built on it, the first one is the connecting road to Minab city and the second one is 1500 meters after ...
Dissertation for Master's Degree in Civil Engineering - Abstract Hydraulic structures in high dams of spillways, as one of the dependent hydraulic structures, have the important role of discharging the incoming floods into the dam reservoir with sufficient safety in free flow or under pressure downstream. In tunnel overflows where the flow is at a high speed and often under ...
Master's Thesis in Civil-Structural Engineering Today, domes and arches have found wide applications in architectural and industrial structures due to their suitable coverage of large openings. The use of today's technologies in styling and optimizing energy consumption in these types of structures is one of the important challenges facing engineers. Therefore, the need to ...
Dissertation of the master's degree in the field: Electrical Engineering - Power trend. Abstract Today, despite the wide use of sensitive loads such as power electronics, computers and non-linear loads in distribution networks, the issue of power quality has received more attention. Most of these loads are sensitive to voltage changes, such as undervoltage and overvoltage, and ...
Master thesis M.Sc. Discipline: Civil Engineering, Orientation: Hydraulic Structures. Abstract River containment is generally done by dams and similar structures. The flow passing through these structures has a significant potential for erosion and scouring of susceptible beds. Relaxation ponds are designed and built mainly for the purpose of depleting flow energy and ...
Master's thesis in the field of civil engineering, soil and foundation, in this research, the bearing capacity of the conical pile group and the cylindrical pile group with the same volume are calculated and compared. Due to the lack of numerical studies and modeling by software for conical piles compared to laboratory tests in this field, in this research, the modeling of the ...
Master's thesis in the field of civil engineering, structure orientation Alkaline Aggregate Reaction [1] (AAR), is a chemical reaction that occurs in some concrete structures. (AAR) is a reaction between alkaline fluids in the pores and silica aggregates. Concrete failure, including expansion and cracking due to the alkaline reaction of aggregates, is of particular importance. ...
Master's thesis in the field of road, building and environmental engineering - hydraulic structures. In this research, the effect of geobags on the scour control of bridge piers has been studied using Computational Fluid Dynamics (CFD) method. Geobags are geotextile bags that are filled with materials such as sand, concrete or materials from river dredging. Due to the ...
An academic thesis for receiving a master's degree in chemical engineering, environmental orientation. Among the models that are able to make successful predictions for the performance of reverse osmosis membranes, that is, the amount of separation and flow flux in a wide range of physical conditions (membrane and solution) and laboratory conditions (pressure and concentration), ...
Dissertation for receiving a master's degree Abstract: In this thesis, the educational odes of Sana'i have been identified and the intellectual trajectory and thought of Hakim Sana'i have been determined. , different from others
Dissertation for Master's Degree in Chemistry (Applied Chemistry - Polymer) Abstract: Ethylene polymerization was successfully performed in the presence of Phillips catalyst and in the slurry phase. In the continuation of the work, the effect of some effective parameters in polymerization, including the effect of trialkylaluminum, the effect of 1-hexane comonomer, the effect of ...
Thesis for Master's degree in the field: Chemical Engineering Abstract Today, tea is one of the most popular drinks among the people of the world, especially in Iran, that's why drying tea leaves is essential for long-term storage. In this research, both a tea leaf and a pile of it were examined and dried. Green tea leaves were dried in the temperature range of 35 to 55 degrees ...
Doctoral Dissertation in the field of Civil Engineering - Water and Environment Abstract Network methods are among the most widely used groundwater modeling tools that have been widely spread and accepted in the last two decades. On the other hand, the advancement of computing power of computers and the ease of access to them have led to the rapid development of numerical ...
Master's thesis in the field of road, building and environmental engineering - hydraulic structures Abstract In this research, nonlinear wave differential equations are solved by the local RBF-DQ numerical method. These differential equations are in the form of Laplace's equation (as a governing equation) and nonlinear boundary conditions on the free surface; The basis of the ...
Dissertation for receiving a master's degree in the field of civil engineering, structure orientation. Abstract: Today, many reinforced concrete structures that are in operation are more than 75 years old and have been damaged due to natural disasters such as earthquakes and wind, or due to material fatigue or corrosive factors. Maintenance of structures is very important due to ...
Dissertation for Master's Degree (M.A) Field: Physical Education and Sports Sciences Abstract Introduction: Statistics show that the prevalence of coronary artery disease and its mortality is increasing in Iran, such that about forty percent of all deaths are caused by this complication. At the same time, cardiovascular disease causes the highest rate of death, disability and ...
Dissertation for Master's degree in chemical engineering, thermokinetic orientation, abstract removal of hazardous organic pollutants from groundwater and wastewater is one of the most important topics in environmental research. Phenols and phenolic compounds have been identified as hazardous pollutants. Several technologies and processes have been developed for industrial ...
Dissertation for M.S.c Master's Degree Orientation: Applied Abstract: In recent years, semi-conducting nanoparticles have attracted a lot of attention due to their electrical and mechanical properties, which result from limited quantum effects compared to their counterpart materials. Among semiconductor nanoparticles, ZnO nanoparticles have higher efficiency. To achieve higher ...
Dissertation for the degree of Doctor of Dentistry Abstract: Introduction: HTLV-1 virus is one of the human retroviruses, which in some patients is the cause of T lymphocyte leukemia and myelopathy related to HTLV-1 and some other inflammatory diseases. Considering the endemicity of Khorasan with respect to the HTLV-1 virus and the existence of few studies on the relationship ...
Doctoral Dissertation in Chemical Engineering Abstract With the increase in population, the need for energy resources for mankind has also increased. Diesel, as an effective fuel, fulfills the need for transportation fuel in the world. Biodiesel, which is considered a renewable fuel and produces less harmful environmental effects, is produced from various sources, among which ...
Dissertation: Dissertation for receiving a specialized doctorate degree in pediatrics. Persian abstract. Title: Comparison of the effect of cefixime and azithromycin on pediatric dysentery. Infectious diarrhea is diarrhea caused by an infectious microorganism, of which Shigella is known to be the most important causative agent. Shigellosis in children may be associated with high ...
Master's Thesis in Chemical Engineering Abstract Simulation of dynamic surface tension phenomenon in solvent oil systems based on permeation process is one of the prominent processes in the field of increasing extraction from oil reservoirs, gas injection. Therefore, a correct understanding of the mechanisms and how these processes are carried out is a big step towards ...
Master's thesis in the field of chemical nanoengineering Abstract: Fabrication of ceramic nanofiltration membrane for chloride ion separation (case study: gas condensate) In this research, chloride ion separation using alumina-titania double layer nanofiltration membrane has been investigated. For this purpose, first, the alumina-titania double-layer membrane is made based on ...
Master's degree thesis in the field of chemical engineering, thermokinetic and catalyst orientation. Abstract The purpose of this research is to estimate the electrical conductivity of natural waters based on modern mathematical methods. To achieve this, the waters of the Karaj and Jajrud rivers are considered as special cases. For this purpose, 20 sampling stations were ...
((Master's Thesis)) Abstract Introduction: Helicobacter pylori is one of the most important human stomach pathogens. BabA2 Hpa HsP genes are essential in binding to gastric epithelial cells and bacterial pathogenicity. The frequency of these genes is different in different geographical regions. The aim of this study was to evaluate the frequency of BabA2, Hsp Hpa genes in ...
Master's thesis in the field of chemical nanoengineering, abstract modeling of chloride ion removal from gas condensate using nanofiltration of chloride ion in gas condensate can cause severe corrosion of equipment and pipes. Therefore, it is necessary to remove it from the condensate flow. The aim of this work is the mathematical modeling of the nanofiltration process for the ...
Thesis for receiving a master's degree in the field of chemical engineering, environmental orientation. Abstract: Ethylenediaminetetraacetic acid, due to its ability to solubilize and deactivate metal ions by forming a complex in the aqueous environment, has many applications, especially as a chelating agent for iron fertilizer. The synthesis of this substance is done in ...
Presented to graduate education management as a part of the educational activities required to obtain a master's degree, the dimensions of MEMS components according to Figure (1-2) include a wide range, from dimensions smaller than one micrometer that are not visible to the eye to dimensions of one millimeter, also types of these systems can be in a simple state, a tool without ...
Dissertation for receiving professional doctorate degree in veterinary medicine Abstract In order to detect Histomonas mele agridis in slaughtered turkeys in Isfahan province, 200 blood samples and 200 liver samples were taken in the slaughterhouse and after DNA extraction, the 550 bp fragment of 18SRNA gene was amplified. In addition, liver samples were preserved in 10% ...
Master's Thesis in Genetics Persian Abstract Deafness is one of the most common sensory diseases that affects 1 in 1000 babies. 60% of deafness is genetic, which is 70% of non-syndromic cases with autosomal recessive inheritance. To date, more than 50 genes for autosomal non-syndromic deafness have been identified. In Iran, deafness is one of the most common hereditary diseases ...
Dissertation for M.Sc Master's degree, specialization: process engineering, abstract of the proposed project, the feasibility of converting gas condensates into products with higher added value and consumable fuels such as gasoline. Considering the huge gas and oil reserves in Iran, this country is one of the major importers of gasoline. Therefore, it is very necessary to ...
Dissertation for receiving a professional doctorate degree in the field of medicine Persian Abstract Introduction: Considering the importance of swimming in physical and mental health and the aspect of water therapy for diseases, it is important to observe hygiene and standards in swimming pools. Swimming pools, as one of the recreational centers and in terms of direct ...
Master's Thesis, Energy Conversion, Abstract: In this project, we will numerically investigate a stable gas flow in a microchannel with a rectangular cross-section. The flow with a certain temperature enters the channel with a constant temperature wall. Momentum and energy equations are discretized and solved numerically. Discretization has been done by FVM method and ...
Master's Thesis in the field of Electrical Engineering - Control Abstract Evaluation of the transient stability of power systems using the data of phasor measurement units by the efforts of Hanieh Mohammadi Rapid evaluation of security in power networks in emergency situations and the occurrence of various errors is a vital thing to prevent collapse and create nationwide ...
Field of study: Mechanics, orientation: energy conversion. The present research was conducted in order to investigate the movement of pig in pipelines. Due to the importance of pipelines in providing energy resources in the world, after installation and operation, the maintenance of these lines is of high importance, which has caused special attention to be paid to the design of ...
Dissertation for Master's Degree (M.Sc) Abstract Chrysanthemum (Chrysanthemum morifolum L.) is one of the most important cut flowers in the world, which today ranks second in the world after roses in terms of economy and cultivation. One of the important problems of this flower is vascular blockage and disruption of the water balance. For this purpose, a study based on a ...
Dissertation for M.Sc) in the field of mechanics in the field of construction and production. Abstract In the present research, the design and construction of the ECAR machine in order to investigate the effects of the process on carbon steel sheets was our goal. The desired research was carried out in the research workshop of Islamic Azad University, Jaseb branch. After the ...
Master's thesis in the field of electrical power Abstract: Pulsed power is the accumulation of energy after a relatively long period of time and the release of energy very quickly. This process is to increase the instantaneous power of the system. The characteristic of this pulse includes the voltage level and rise time based on the load requirements. Improvement of efficiency ...
Mechanical Engineering Master's Thesis - Energy Conversion One of the ways to reduce energy consumption for underwater devices is to reduce the drag on these devices. The nose of underwater objects is one of the most important parts of these objects in dealing with currents. By optimizing this part, the drag can be reduced by controlling the boundary layer of the fluid, by ...
Dissertation for receiving a master's degree in the field of agricultural engineering-horticulture (flowers and ornamental plants) Electromagnetism with a short wavelength and a very high number of oscillations (frequency) is between 300 MHz and several GHz per second. In this research, from the 2M226 magnetron with a wavelength of 12 cm, radiating waves in the frequency band of ...
Dissertation to receive a master's degree in Natural Resources Engineering (M.Sc.) Major: Forestry and Forest Ecology Abstract The purpose of the present research is to study the habitat conditions of the larg (Pterocarya Fraxinifolia (Poir) Spach) in the Lart valley in Badreh city, Ilam province. Due to the limited area covered by Larg mass, after recording the position of all ...
Master's Thesis in Mechanical Engineering (Applied Design): Abstract of the analysis of leading damage in pin connections of composite materials. The purpose of this research is to analyze the leading damage in pin connections of composite materials. To do this, finite element software ABAQUS and FORTRAN programming have been used. The contact between the composite plate with ...
Presented to obtain a master's degree in the field of mechanical engineering-applied design orientation. Abstract In this research, we investigated the free vibration of a cracked beam and found its natural frequencies. In the first part, by using the open crack model, by modeling the cracked part as a beam-shaped element and satisfying the boundary conditions, we obtained the ...
Master's thesis in the field of mechanical engineering (applied design trend) Abstract of the study of the deterioration of non-isotropic TWB sheets under the hydroforming process. During the research, four different metals of aluminum alloys 6111-T4, 5083-H18, 5083-O and dual-phase steel DP590 and two spherical tensile tests and simple uniaxial tensile tests were used. Then we ...
Master's Thesis of Mechanics, Energy Conversion, Abstract In this study, by using the computational fluid dynamics technique, an attempt has been made to obtain the optimal dimensions for the injection nozzles of the vortex tube device. For this purpose, numerical simulation has been performed for different values ??of length, width, and height of injection nozzles, and other ...
Dissertation for M.Sc Master's Degree, Mechanical Engineering-Manufacturing and Production Abstract Nowadays, due to the need for parts with high strength and low weight, the method of manufacturing parts has become important. Hot gas forming [1] is a new process that, due to the elimination of side operations such as welding, the total weight of the parts is reduced, the ...