Download more than 22 examples of thesis, proposal and project topics about isotropic in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Master's thesis in the field of mechanical engineering (applied design trend) Abstract of the study of the deterioration of non-isotropic TWB sheets under the hydroforming process. During the research, four different metals of aluminum alloys 6111-T4, 5083-H18, 5083-O and dual-phase steel DP590 and two spherical tensile tests and simple uniaxial tensile tests were used. Then we ...
Summer 1390 Expertise Master of the field: Civil Engineering Orientation: Structure Abstract: In this thesis, the effect of nanosilica on the mechanical properties and durability of concrete containing polypropylene fibers
Master's Thesis in Electrical Engineering (Communication System) Abstract: Optimizing Node Placement in Different Environments for Broadband Sensor Networks Locator Systems are systems that can detect the location of an object in a space. Such systems usually detect the distance between two objects by using radio communication and determine the location of the object in the area ...
Dissertation for Master's Degree in Civil Engineering, Soil and Foundation Mechanics Abstract: Since many structures are built in dense urban areas, there is an increasing need to build buildings and geotechnical structures on soft clay soils. Clay soils usually show significant creep deformation. Although a lot of research has been done on the creep behavior of natural clay, ...
Master's thesis in the field of civil engineering, soil and foundation, today, due to the progress of the tunneling industry, the need to analyze and design underground structures in rocky environments is felt more than in the past. Although there are many numerical and practical software available in this field, none of them are complete and perfect in all fields, and each of ...
Education Level: Master's Degree, Field: Civil Engineering, Major: Structures Abstract: In this thesis, the effect of nanosilica on the mechanical properties and durability of concrete containing polypropylene fibers was investigated. Polypropylene fibers with a length of 18 mm and a ratio of length to diameter of 0.9 mµ were used. The effect of fibers and nanosilica in three ...
Tendency of soil mechanics and foundations. Abstract: Investigating the behavior of soils due to different loadings is one of the most important issues in geotechnical engineering. The behavior of soils depends on several parameters such as grain size, grain type, loading method, stress history, etc. Non-alignment of main stress and main strain directions is a phenomenon that ...
Master's thesis in the field of inorganic chemistry Abstract In this thesis, we investigate the anticancer diamine ruthenium complexes by computational chemistry, which examines the following: energy analysis, which examines the absolute energy value, dipole moment, isotropic and anisotropic polarizability of the complex. 2- The analysis of the frontal orbitals, the energy of ...
Dissertation for receiving the master's degree ""MSc"" specialization: applied chemistry Farsi abstract of the thesis or dissertation (including: summary of objectives, implementation methods and results obtained in maximum 10 lines): The possibility of manipulating matter at the nano level was first proposed in written form by Richard Feynman. During his conference called ...
Introduction In today's era, the presence of waste materials resulting from various physical and chemical processes is one of the important problems of industrialized and developing countries. So that extensive research is being carried out for methods of recycling or disposing of them to minimize the damage to the environment. In this regard, construction researchers, like ...
Dissertation for receiving M.Sc degree) Major: Inorganic Chemistry Dissertation Abstract: We used Density Functional Theory (DFT) method at DFT/6-31G level to investigate the geometric structure, relative energies and electronic properties of possible protropic tautomers in Nexium, Protonix and Lamivudine. The structure and relative energies of tautomers in different solvents ...
Master's thesis in the field of chemical nanoengineering, abstract modeling of chloride ion removal from gas condensate using nanofiltration of chloride ion in gas condensate can cause severe corrosion of equipment and pipes. Therefore, it is necessary to remove it from the condensate flow. The aim of this work is the mathematical modeling of the nanofiltration process for the ...
Mechanical Engineering Master's Thesis Proposed Design - Introduction The use of fibers in concrete started about 50 years ago and day by day their use in various fields has increased. Adding fibers to the mixing design improves the mechanical properties of concrete and the behavior of the structure after cracking. It also increases the softness and malleability of the section. ...
Presented to graduate education management as a part of the educational activities required to obtain a master's degree, the dimensions of MEMS components according to Figure (1-2) include a wide range, from dimensions smaller than one micrometer that are not visible to the eye to dimensions of one millimeter, also types of these systems can be in a simple state, a tool without ...
Master's Thesis in Electrical Engineering (Communication System) Abstract: Optimizing the placement of nodes in different environments for ultra-broadband sensor networks. Locator systems are systems that can detect the location of an object in a space. Such systems usually detect the distance between two objects by using radio communication and determine the location of the ...
Dissertation for M.Sc Master's degree, mechanical engineering-applied design Abstract With the emergence of composite materials, a huge progress was achieved in many engineering applications. Nevertheless, problems such as delamination, stress concentration, and discontinuous distribution of stress, the idea of ??creating a new type of composite materials in which properties ...
Master's Thesis in Mechanical Engineering-Applied Design Abstract In this thesis, classical sheet theories, first-order shear deformation theory and refined two-variable theory for the free vibration problem are investigated using standard finite element and hierarchical finite element methods. The refined two-variable theory is an equivalent single-layer theory, in which two ...
Dissertation for M.Sc Master's Degree, Mechanical Engineering - Applied Design Abstract Modern wind turbines today tend to vibrate a lot due to their elastic, long and narrow structure. Therefore, all components of wind turbines should be subjected to vibration and modal analysis in the design stages, and their natural frequencies should be reviewed with turbine excitation ...
Thesis Mechanics to get a Master's degree Abstract: First, the solution of Volterra-type anti-plate displacement in a rectangular plate with limited length and width and different boundary conditions is obtained by the method of separation of variables. Then, the distributed displacement technique is used to obtain the integral equations related to the rectangular plate weakened ...
Master's Thesis in Mechanical Engineering - Applied Design Abstract of elastoplastic analysis of thick-walled tanks made of targeted materials with linear kinematic stiffness behavior under cyclic loading, stress analysis and deformation of spherical thick-walled tanks made of subject materials under internal pressure loading and temperature difference are discussed in this ...
Master's Thesis in Mechanical Engineering (Applied Design): Abstract of the analysis of leading damage in pin connections of composite materials. The purpose of this research is to analyze the leading damage in pin connections of composite materials. To do this, finite element software ABAQUS and FORTRAN programming have been used. The contact between the composite plate with ...
Master's Thesis in Mechanical Engineering (Applied Design) Abstract of three-dimensional interlayer stress investigation in mechanical connections in layered composite materials The purpose of this thesis is to investigate three-dimensional interlayer stresses in mechanical connections in layered composite materials. For this purpose, finite element method and ABAQUS software ...