Download the thesis about heating methods✅ Word Document

Download more than 100 examples of thesis, proposal and project topics about heating methods in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.

Number of pages: 99 Category: Chemical - Petrochemical Engineering

Dissertation to receive a master's degree in the field of chemical engineering, thermokinetic orientation. Abstract With the increase in the use of fuel cells in the industry and as an on-site application, there is a need to develop production units on the site of hydrogen. In this research, a monolithic catalytic reformer in which autothermal reforming of methane takes place is ...

Number of pages: 120 Category: Paramedical

Dissertation for Master's Degree in Intensive Care Nursing Introduction: Insertion of venous catheter is the most common invasive procedure performed for hospitalized patients. In many cases, this simple procedure can save the patient's life. On the other hand, this action becomes a difficult and time-consuming technique in some groups and patients. Various auxiliary measures ...

Number of pages: 67 Category: Food and Packaging Industries

Persian Abstract Introduction: In the food industry, there is an increasing tendency to develop economic methods in order to prepare food products with high nutritional and sensory value. Drying is one of the most widely used methods for preserving fruits and vegetables. Citrus fruits are one of the most important tropical and sub-tropical fruits in the world, which are highly ...

Number of pages: 209 Category: Biology - Environment

Thesis for Master's Degree in Energy Conversion (M.Sc.) Abstract The country of Iran is located between the orbits of 25 to 40 degrees north latitude and is located in an area that is among the highest in the world in terms of receiving solar energy. The amount of solar radiation in Iran is estimated between 1800 and 2200 kilowatt hours per square meter per year, which is higher ...

Number of pages: 144 Category: Facilities - Mechanics

Master's thesis in the field of mechanical engineering, energy conversion trend. Abstract: Considering that heat transfer is widely used in various fields of science, it is necessary to use wide recessed or raised surfaces due to physical and spatial limitations in electrical systems. The main purpose of using these surfaces is to increase heat transfer by increasing the ...

Number of pages: 54 Category: Food and Packaging Industries

Dissertation for receiving a master's degree in food technology, Persian abstract, background and purpose: Olive tree leaves have many compounds, including oleuropein, which are related to the majority of their medicinal properties. Olive leaf extract is also rich in phenolic compounds. In order to extract phenolic compounds, olive leaves must first be dried. Natural drying and ...

Number of pages: 84 Category: Facilities - Mechanics

Dissertation for master's degree in mechanical engineering, construction and production trend. Abstract One of the important topics in the field of welding in engineering structures is the discussion of reducing residual stresses in welding lines and improving the quality of welding. Residual stresses reduce the load bearing limit, the life of welded joints and change the forms ...

Number of pages: 95 Category: Librarianship

Master's Thesis in Accounting (M.A) Abstract We are all familiar with the meaning and concept of cheating, although cheating can be generalized to many examples, but we mean cheating in academic exams. Cheating is a dishonest behavior, it is a way other than the honorable way and reaching reality and truth, it is other than the legitimate way and showing oneself with an upside ...

Number of pages: 196 Category: Architectural Engineering

Dissertation for receiving a master's degree (M.A) in the field of architecture – Architectural engineering trend spring 2014 Urban safety area, fire training centers are one of the most effective places in the three training departments

Number of pages: 184 Category: Geography - Urban Planning

Abstract The formation of educational and cultural settlements in terms of shape, how to settle and the type of materials and many other parameters are related to climatic elements. Architecture compatible with climatic conditions, in addition to providing a comfortable atmosphere, prevents energy waste and will bring favorable economic effects on a micro and macro scale. The ...

Number of pages: 190 Category: Psychology

Master's Thesis in Psychology (M.A.) Orientation: Clinical Abstract The purpose of this research was to compare the emotional schemas and cognitive distortions in people with migraine with healthy people. To do it, a causal comparative (post-event) research method was used. The statistical population was all people with migraine under treatment in the neuropsychiatric clinics of ...

Number of pages: 142 Category: Geography - Urban Planning

Dissertation for Master's Degree (M.Sc) Field: Natural Geography - Applied Climatology Abstract Due to its location in a special geographical location, topographic conditions and climatic systems affecting the region, the city of Kavus has a relatively cold climate. So that the air temperature in the coldest month of the year reaches 9.2 degrees Celsius and has the highest ...

Number of pages: 101 Category: Textile Industries

Dissertation to receive the master's degree ""M.S.c"" specialization: Textile chemistry and fiber science Abstract: One of the important processes in the completion of textile goods is the underhand improvement in textiles. Finishing the softener provides a desirable softness to the fabric and improves its properties, and the main goals of the softener are to reduce static ...

Number of pages: 153 Category: Electronic Engineering

Dissertation for obtaining a master's degree in electrical engineering, electronics, abstract, accurate measurement and control of temperature in industrial and research systems is of particular importance, and the correct operation of some industrial and laboratory tools is possible only in a certain location with a small number of channels (maximum 8 channels). Therefore, the ...

Number of pages: 100 Category: Electronic Engineering

Abstract The main task of the synchronous generator excitation system is to provide the necessary voltage for the generator excitation winding. The excitation voltage is a dc voltage and it is used to create a flux in the excitation winding of the generator and consequently to produce a magnetic field to produce electrical energy by a synchronous generator. In the provided ...

Number of pages: 87 Category: Architectural Engineering

Dissertation for the degree of Master of Islamic Architecture Engineering Abstract: In the design of many existing buildings of our time, instead of considering the psychological and cultural needs of users, paying attention to organ functions and the latest examples built in advanced countries without regard to the culture of that region has been prioritized. This weakness is ...

Number of pages: 143 Category: Civil Engineering

Master's Thesis of Structures Abstract In the welding process, after a stage of cooling of the body, due to the uneven distribution of temperature, stresses remain in it, which are called residual stresses. To obtain these stresses, the temperature history of the object during the welding process must be available. For this purpose, first a thermal analysis is done to obtain the ...

Number of pages: 182 Category: Electrical Engineering

Dissertation of the master's degree in the field: Electrical Engineering - Power trend. Abstract Today, despite the wide use of sensitive loads such as power electronics, computers and non-linear loads in distribution networks, the issue of power quality has received more attention. Most of these loads are sensitive to voltage changes, such as undervoltage and overvoltage, and ...

Number of pages: 79 Category: Electronic Engineering

Dissertation of the master's course in electrical field (M. Sc) orientation: power Abstract: In this thesis, electrical and mechanical defects in electric machines are examined and the factors that cause them and the methods of fixing these defects are stated. After that, with the help of the winding function method of the simulation machine and the intended error, i.e. the ...

Number of pages: 87 Category: Physical Education - Sports

Dissertation for Master's Degree in Physical Education and Sports Science Abstract The aim of the present study was to find a relationship between mental toughness, ways to cope with stress and optimism in the players of the sitting volleyball league of Iran. The statistical population of this research was all male volleyball players of the sitting volleyball league of Iran, and ...

Number of pages: 150 Category: Electronic Engineering

Dissertation to receive a master's degree ""M.Sc"" in the field of electrical engineering, power, high voltage, abstract. Inverters can produce single-phase and three-phase ac voltages from a constant or variable dc voltage. There are various methods to control the output voltage of the inverter, which is introduced in this thesis from an inverter system with solar panel input. ...

Number of pages: 95 Category: Chemical - Petrochemical Engineering

Master's Thesis in Chemical Engineering, Process Design, Abstract: In this thesis, a method for thermodynamic analysis and evaluation of energy consumption of distillation tower by using side cooling is introduced. The research done in the past was aimed at the distribution of the heat diagram and checking the possibility of adding or extracting heat from all the different parts ...

Number of pages: 115 Category: Chemical - Petrochemical Engineering

Doctoral thesis in the field of chemical engineering abstract theoretical and experimental investigation of the continuous process of desalination of heavy crude oil using microwaves and ultrasonic waves Desalination of crude oil is the first step in oil refining, by which the undesirable compounds with the oil are separated before they reach the main unit. In order to reduce ...

Number of pages: 117 Category: Electronic Engineering

Presented to graduate education management as part of the academic activities required to obtain a master's degree in the field of mechatronics. Abstract As you know, air conditioner is a high consumption device and has a Freon refrigeration cycle. What drew the companies to the production of inverters was to solve the shortcoming of air conditioners in high energy consumption. ...

Number of pages: 126 Category: Chemical - Petrochemical Engineering

Thesis for master's degree in the field: chemical engineering Abstract Hard polyurethane[1] is always considered one of the most effective and practical polymers in various industries, especially the coating industry. Excellent adhesive property, curing ability at ambient temperature and corrosion resistance of this polymer are some of its remarkable features. This study was ...

Number of pages: 104 Category: Chemical - Petrochemical Engineering

Master's Thesis in Chemical Engineering (Process Simulation and Control) Abstract Modeling and Simulation of the Electrostatic Desalination Process of Crude Oil by Elham Ariafard The aim of this research is to model the desalination process of crude oil based on the population balance method. For this purpose, the one- and two-stage electrostatic desalination process, which ...

Number of pages: 70 Category: Chemical - Petrochemical Engineering

Master's Thesis on Simulation and Process Design Abstract So far, many methods have been presented to remove phenol from wastewater, among them, the membrane bioreactor process has received attention in the last decade. The use of hollow fiber membrane contactor in this process is to avoid direct contact between two phases and increase the surface-to-volume ratio. In the current ...

Number of pages: 99 Category: Chemical - Petrochemical Engineering

Master's thesis in the field of chemistry, Analytical Chemistry, Abstract In this project, a molecular template polymer was prepared for the selective extraction of furan. To prepare this polymer, methacrylic acid (functional monomer), ethylene glycol dimethacrylate (cross-linking agent), 2,2-azobisisobutyronitrile (initiator), a mixture of pyrrole (furan substitute or target ...

Number of pages: 121 Category: Electronic Engineering

Master of Mechatronics Abstract As you know, the air conditioner is a high consumption device and has a Freon refrigeration cycle. What drew the companies to the production of inverters was to solve the shortcoming of air conditioners in high energy consumption. To improve energy consumption in every part of the industry, one should pay attention to several parameters, it is ...

Number of pages: 104 Category: Food and Packaging Industries

Dissertation for Master's Degree in Agricultural Engineering, Science and Food Industry, Major: Food Microbiology Abstract Aflatoxin M1 (AFM1) is one of the important mycotoxins found in milk and dairy products and is a metabolic product of aflatoxin B1. Today, it is possible to remove mycotoxins in food or animal feed by using physical, chemical or microbial methods. The ...

Number of pages: 139 Category: Chemical - Petrochemical Engineering

Master's Thesis in Polymerization Engineering Abstract In this research, the thermal and catalytic pyrolysis of four types of polymers such as heavy polyethylene and polypropylene and two styrene butadiene rubber and polybutadiene rubber in a semi-continuous stirred reactor under nitrogen gas and using HZSM-5, FCC and H-Mordenite catalysts has been investigated. In this study, ...

Number of pages: 121 Category: Electrical Engineering

Master's thesis in the field of electrical engineering - Power Abstract The importance of the energy issue has increased the need to use new energy sources as a producer of electrical energy. Nowadays, one of the suitable options for providing electric energy are scattered production sources. The use of distributed generation has many positive effects, such as increasing the ...

Number of pages: 86 Category: Biology - Environment

Dissertation for receiving a master's degree in the field of preservation and modification. Abstract In this research, the effect of combined modification of colloidal silver-hot water on the heat transfer from the hot press plates to the heart of the beech (Fagus orientalis) chipboard cake, the physical and mechanical properties of the chipboard and the chemical changes of the ...

Number of pages: 85 Category: Electrical Engineering

Abstract The main task of the synchronous generator excitation system is to provide the necessary voltage for the generator excitation winding. The excitation voltage is a dc voltage and it is used to create a flux in the excitation winding of the generator and consequently to produce a magnetic field to produce electrical energy by a synchronous generator. In the provided ...

Number of pages: 61 Category: Food and Packaging Industries

Food Science Engineering Thesis for receiving the master's degree ""M. Sc"" Abstract Nitrate, nitrite and ascorbic acid are present in a wide range of foods. Vegetables are an important source of nitrate, nitrite and ascorbic acid absorption in the diet. The purpose of this research is to investigate the effect of frying and boiling process on the amount of nitrate, nitrite and ...

Number of pages: 71 Category: Food and Packaging Industries

Dissertation for Master's Degree in Food Science and Engineering, Food Microbiology, Abstract: Today, the increase in environmental pollution and the decrease in oil resources have led to the development and replacement of biodegradable packaging instead of packaging derived from petroleum resources. Also, in this regard, the use of antimicrobial compounds such as silver ...

Number of pages: 155 Category: Electronic Engineering

Master's degree in electrical engineering, electronics, abstract, accurate measurement and control of temperature in industrial and research systems is of particular importance, and the correct operation of some industrial and laboratory tools is possible only in a specific location with a small number of channels (maximum 8 channels). Therefore, the decision was made to build a ...

Number of pages: 103 Category: Chemical - Petrochemical Engineering

The thesis for obtaining a master's degree in the field of organic chemistry, abstract protection and deprotection of functional groups is one of the inevitable steps in the synthesis of multi-functional compounds. Selective protection of carbonyl groups is very important in modern organic chemistry. 1-Diacetates are one of the basic protective groups of the carbonyl functional ...

Number of pages: 182 Category: Electrical Engineering

Dissertation of the master's degree in the field: Electrical Engineering - Power trend. Abstract Today, despite the wide use of sensitive loads such as power electronics, computers and non-linear loads in distribution networks, the issue of power quality has received more attention. Most of these loads are sensitive to voltage changes, such as undervoltage and overvoltage, and ...

Number of pages: 83 Category: Food and Packaging Industries

Dissertation for Master's Degree in Food Science and Technology, Technology Orientation Abstract: Today, due to cultural and social changes, the pattern of food consumption in the world is changing and the demand for ready-made foods is increasing. Based on this, dough-coated products such as nuggets are very popular due to their desirable sensory characteristics. Chicken ...

Number of pages: 48 Category: Research Methodology

Introduction Since ancient times, energy supply has been a very important issue for human societies. In today's era, due to the industrial and technological advances that have a very important place in the daily life of people, the importance of the problem is manifested in a more obvious way. But the common sources of energy production, which are mostly non-renewable, will be ...

Number of pages: 66 Category: Electrical Engineering

Dissertation of the Master's course in the field of electricity (M. Sc) orientation: power Abstract: In this thesis, electrical and mechanical defects in electric machines are first examined and the factors causing them and the methods of fixing these defects are stated. After that, with the help of the winding function method of the simulation machine and the intended error, ...

Number of pages: 131 Category: Facilities - Mechanics

Abstract: Research in the field of heat transfer of suspensions with nanometer-sized solid particles in the base fluid has started in the last decade. Recent research in the field of nanofluids has shown that the addition of nanoparticles causes a significant increase in the heat transfer of the suspension. Another common way to improve the thermal performance of devices is to ...

Number of pages: 121 Category: Facilities - Mechanics

Dissertation for Master's degree (M.Sc) orientation: energy conversion. Abstract In this research, a study on irreversible absorption refrigeration systems based on internal and external irreversibility is presented with regard to the limited thermal capacities of external tanks. To optimize the system, three scenarios were defined, in which objective functions such as ...

Number of pages: 153 Category: Biology - Environment

Master's Thesis in Energy Systems Abstract In recent years, the possibility of using solar energy for cooling and dehumidification has occupied the human mind. Solar absorption cooling systems (Solar Absorption Cycles) have advantages such as not being environmentally dangerous and low energy consumption, especially during electrical peak hours. In addition, since the cost of ...

Number of pages: 124 Category: Chemical - Petrochemical Engineering

Master's Thesis in Energy Systems Abstract Crude oil distillation unit is one of the most important and critical operational units of any refinery. This unit often requires revision in the design of the structure (Revamping) or making small changes in its existing condition without the need to reduce or increase the basic process devices (Retrofitting) in order to achieve higher ...

Number of pages: 49 Category: Food and Packaging Industries

Dissertation for M.Sc degree, major: food microbiology, abstract Sterilized milk products that are prepared by the Faradam method, especially Faradam milk and cream, have opened their place in the diet of Iranian people in recent years. By adding healthy ingredients to products such as breakfast cream, the nutritional value of these products can be improved. In this research, ...

Number of pages: 88 Category: Facilities - Mechanics

Dissertation for M.Sc Master's Degree, Mechanical Engineering-Manufacturing and Production Abstract Nowadays, due to the need for parts with high strength and low weight, the method of manufacturing parts has become important. Hot gas forming [1] is a new process that, due to the elimination of side operations such as welding, the total weight of the parts is reduced, the ...

Number of pages: 120 Category: Facilities - Mechanics

Master's Thesis in Mechanical Engineering - Energy Conversion Abstract The vortex tube is a simple mechanical device that has no moving parts and is one of the equipment used in the refrigeration system, in which a high-pressure fluid enters the vortex tube through the inlet nozzles and splits into two streams with a lower and higher temperature than the inlet temperature, thus ...

Number of pages: 80 Category: Agricultural Engineering

The thesis for receiving a master's degree (M.Sc.) in the direction of agricultural mechanization is an abstract of greenhouse cultivation, a growing industry in many countries. But due to off-season production, greenhouses have high energy consumption. The purpose of this research is to analyze the economic and energy production of greenhouse products and investigate the effect ...

Number of pages: 150 Category: Electrical Engineering

Dissertation for receiving the master's degree ""M.Sc"" in the field of power electrical engineering Abstract Inverters can produce single-phase and three-phase ac voltages from a constant or variable dc voltage. There are various methods to control the output voltage of the inverter, which is introduced in this thesis from an inverter system with solar panel input. In this ...

Number of pages: 110 Category: Facilities - Mechanics

Dissertation for Master's Degree in Mechanical Engineering, Manufacturing and Production, Abstract: The process of laser forming, especially in recent years, has been widely noticed. In this process, shaping is done by irradiating the laser beam on the surface of the sheet, which is accompanied by a rapid local heating and subsequent cooling of the heated area. However, the way ...

Number of pages: 123 Category: Educational Sciences

Master's Thesis in Philosophy of Education and Training May 2014 Abstract: The purpose of this research is to investigate the importance and position of Challenging and neglected Spiritual education And then

Number of pages: 121 Category: Civil Engineering

end‌name? Rasht Master's Degree: Civil Engineering (M.S.C.) Focus: Hydraulic Structures Academic Year 2011-2012 Summary of the Minab River, the most important river of Khan? The fresh water is in Hormozgan province. this river

Number of pages: 135 Category: Civil Engineering

Thesis for obtaining a master's degree in the field of civil engineering, oriented towards soil and foundation mechanics, Shahrivar   2013 Abstract Dams are always considered as infrastructure structures

Number of pages: 138 Category: Civil Engineering

Dissertation for M.Sc degree in soil and soil mechanics engineering, summer 2013, first chapter, introduction of micro candles 1-1 Micro-candles in general in dealing with problematic soils

Number of pages: 141 Category: Librarianship

Dissertation for the Master's degree ""M.A."" Accounting major: Accounting Abstract: In this research, the relationship between ownership structure and financing methods of companies accepted in the capital market of Iran has been investigated. The model (Lin et al., 2013) has been used to measure financing methods. Among the financing control mechanisms, institutional ...

Number of pages: 114 Category: Librarianship

Dissertation for receiving a master's degree, specialization: accounting, is an abstract of the present research and research work in order to determine the effective factors in the selection of accounting methods for the inventory of materials and goods and its effect on the quality of profitability of companies admitted to the stock exchange. This thesis prepares a framework ...

Number of pages: 146 Category: Management

Thesis of master's degree, field of industrial management, research trend in operations, Shahrivar 2019. Abstract How and what to choose has long been the subject of discussion among philosophers and scientists, therefore, obtaining satisfactory results requires

Number of pages: 124 Category: Management

Academic Thesis for Master's Degree in Executive Management, Production and Operations Orientation, Summer 1990 Abstract: Today's world is the age of information, and access to information is a tool to gain advantage.

Number of pages: 90 Category: Management

Dissertation for receiving a master's degree, field: business management, orientation: finance, abstract of the main research problem: evaluating the performance of organizations plays an essential role in the direction of their future strategic decisions, and due to the importance of this issue, the present research deals with it. The main purpose of the research: The purpose ...

Number of pages: 109 Category: Psychology

Master's Thesis in Educational Psychology Dissertation Title Abstract: The purpose of this research is to investigate the relationship between parenting methods and parental involvement in academic affairs with the academic performance of middle school students of Bandar Abbas city. To conduct this research, 280 students of Bandar Abbas city were randomly selected. Then the ...

Number of pages: 145 Category: Management

Dissertation for Master's Degree (.MA) in Public Administration, Financial Orientation Chapter 1: Research Overview 1-1 Introduction In the field of dynamic financing, continuous performance improvement is a vital issue for most banks in order to strengthen competition. Monitoring and improving post-funding performance has increased the complexity of the task. A complex ...

Number of pages: 101 Category: Psychiatry

Master's thesis in the field of psychology, orientation: general. This research was conducted with the aim of investigating the relationship between organizational justice and conflict resolution methods (interpersonal) with the job satisfaction of Hormozgan Cement Company employees. The research method of the present study was descriptive correlation. The statistical population ...

Number of pages: 144 Category: Psychology

Master's Thesis in Psychology (M.A) Major: Clinical Abstract Objective: The purpose of this study was to compare parenting practices and mental health of mothers of children with behavioral disorders and mothers of normal children aged 5 to 12 years old in Bandar Lange and Bandar Kang cities. Method: This research was designed and implemented using a descriptive-causal ...

Number of pages: 144 Category: Librarianship

Dissertation for receiving a master's degree major: Accounting Abstract: This research empirically shows to tax financial analysts, investors, managers and other users of accounting and financial information that there is a positive and significant relationship between tax evasion in the electronic system with the indicators of recording transactions in the books, non-disclosure ...

Number of pages: 108 Category: Psychology

Dissertation for the Master's degree ""M.A"" Major: Educational Psychology Farsi Abstract The purpose of this study was to determine the relationship between parenting methods and personality traits with resilience in adolescence. The statistical population of the research was female secondary school students of one Khorramabad district in the academic year of 1392-1393. The ...

Number of pages: 89 Category: Educational Sciences

Dissertation to receive a master's degree in the field of educational technology (M.A.) Abstract The aim of the current research is to investigate the methods of graphic illustration on the website of smart schools. The statistical population of the research consists of all the websites of smart schools in Kermanshah province, and 1 website was randomly selected for the ...

Number of pages: 172 Category: Geography - Urban Planning

Master's Thesis in Geography and Urban Planning Chapter 1 General Research 1-1- Introduction Although urbanization in the world has a long history, the creation and expansion of new cities was mainly influenced by the industrial revolution in the 19th century. Population growth, diversity in production methods, the formation of public goods production system and changes in ...

Number of pages: 123 Category: Management

Dissertation for M.A. degree. Abstract Considering the importance of customer satisfaction in the use of new technologies in the distribution of goods and services, as well as the widespread use of smart fuel cards, which are being implemented as one of the new methods of providing services; Therefore, investigating the impact of providing services in the form of new methods on ...

Number of pages: 98 Category: Chemical - Petrochemical Engineering

Master's thesis in chemical engineering field, vapor pressure is an important thermodynamic property in process equipment design and chemical engineering unit operation. Therefore, experimental vapor pressure data that cover the entire range of vapor pressure are very valuable, but due to the lack of accurate measurements for the vapor pressure of some materials near the triple ...

Number of pages: 127 Category: Electronic Engineering

Dissertation for Master's degree (M.Sc) in the field of electrical-power engineering. Abstract In this thesis, the design of a resistant controller in power electronic circuit breakers and its comparison with linear control methods have been examined. The main goal of research and development in this field is always to find the most suitable control method in order to implement ...

Number of pages: 115 Category: IT Information Technology Engineering

Master thesis of information technology engineering, information systems management, abstract cloud computing as a new computing model in which software, hardware, infrastructure, platform, data and other resources are provided to cloud users virtually and as a service, on demand and through the internet by cloud providers. This model is based on pay-per-use, that is, users pay ...

Number of pages: 100 Category: Computer Engineering

Master's thesis in the field of computer - software engineering. Abstract: The review of car insurance information has shown that factors such as the type of car used, having a driver's license, the type of license and its compatibility or non-compatibility with the vehicle, the amount of the insurance premium, the amount of insurance policy obligations, the quality of the car ...

Number of pages: 77 Category: Management

Dissertation for Master's Degree in Business Administration, Marketing, Abstract In this research, the value of rice imports for the next 5 years has been predicted using the value of imports of these products during the period of 2011-2014. To make the prediction, first, the predictability of the series was checked by the Wald-Wolfwitz ??randomness test. Then non-causal ...

Number of pages: 83 Category: Electrical Engineering

Dissertation for master's degree in electricity, power orientation Abstract: The production of electrical energy for power systems with the aim of minimizing the total cost of production for active units in the power network is one of the most important topics for today's modern systems. In other words, the purpose of economic load distribution is optimal and appropriate ...

Number of pages: 81 Category: Electrical Engineering

Obtaining a master's degree in the field of electrical engineering, electronics, abstract, mechanization of tools is one of the most important and extensive fields used in production processes. Due to the complexity and uncertainty of machining processes, recently soft computing techniques [1] based on physical models have been preferred to predict the performance of machining ...

Number of pages: 204 Category: Management

Dissertation for receiving the master's degree ""M.A."" » Orientation: Business Management Abstract Dealing effectively with conflict is a fundamental challenge in the interactions of people in the work environment. Conflict is a natural and inevitable phenomenon in individual and organizational life and it appears for many reasons and in different forms. The main problem in ...

Number of pages: 98 Category: Geography - Urban Planning

Dissertation for Master's degree M.se field of remote sensing and geographic information system - water and soil resources Abstract: The phenomenon of dam failure has a catastrophic potential. Therefore, it is important to estimate the hydraulic parameters of flood waves in order to predict risks and manage resources and facilities and save human lives. Therefore, the issue of ...

Number of pages: 85 Category: Computer Engineering

Computer Engineering Master's Thesis Abstract Web development that lacks an integrated structure creates many problems for users. Not finding the information needed by users in this huge warehouse is one of the problems of web users. In order to deal with these problems, web personalization systems have been provided, which by finding the behavior patterns of users without their ...