Download the thesis about harvest time✅ Word Document

Download more than 100 examples of thesis, proposal and project topics about harvest time in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.

Number of pages: 64 Category: Food and Packaging Industries

Dissertation for M. Sc. Abstract Nitrates, nitrites and ascorbic acid are present in a wide range of foods. Vegetables are an important source of nitrate, nitrite and ascorbic acid absorption in the diet. The purpose of this research is to investigate the effect of freezing and cooking process on the amount of nitrate, nitrite and ascorbic acid of commonly consumed vegetables. ...

Number of pages: 87 Category: Food and Packaging Industries

Dissertation for receiving a master's degree in the field of food science and engineering, specialization: food science and industry. Abstract Considering the various uses of vegetables in human nutrition, as well as their taste and usefulness in maintaining health and well-being, their importance is increasing day by day. Considering the short life after harvesting and ...

Number of pages: 76 Category: Agricultural Engineering

An academic thesis for obtaining a master's degree in agriculture majoring in agriculture, investigating the effect of the amount of ripening and the number of harvests on the quantitative and qualitative yield of pvh19 tobacco production. Abstract In order to investigate the effect of the amount of ripening and the number of harvests on the quantitative and qualitative yield of ...

Number of pages: 162 Category: Agricultural Engineering

Dissertation for Master's Degree in Agricultural Engineering, Horticultural Science-Fruiting tendency Abstract Grapes are non-dehiscent fruits with low physiological activity and are very sensitive to water loss and fungal contamination, especially gray mold, during the post-harvest period in the warehouse and during transportation as well as marketing. In the present study, the ...

Number of pages: 72 Category: Food and Packaging Industries

Dissertation for M.Sc. Degree: Food Industry 1.1 Introduction Along with the increase in population, the demand for food has also increased and this has caused the excessive use of chemical and organic fertilizers to increase crop production (Ardkani et al., 2005). Vegetables are rich in vitamins, minerals and antioxidant compounds, whose anti-cancer properties have been proven ...

Number of pages: 71 Category: Food and Packaging Industries

Dissertation for M.Sc degree, major: food science and technology. Abstract To conduct this research, samples of spinach (Damghan), tomato (Dezful), lettuce (Varamin), celery (Tehran), zucchini (Gorgan), eggplant (Qasrshirin) were purchased from Damghan market in June 2013. Nitrate, nitrite and ascorbic acid concentrations were measured in the edible parts of each sample. The ...

Number of pages: 51 Category: Agricultural Engineering

Dissertation for Master's Degree (M.Sc.) Field: Horticulture-Ornamental Plants Abstract chrysanthemum (Dendranthema grandiflorum L.) is one of the non-flowering flowers and sensitive to vascular blockage. This study is based on a completely randomized design with 10 treatments including geranium plant essential oil in 3 levels (2, 6 and 10 cc in 600 cc of distilled water), case ...

Number of pages: 129 Category: Civil Engineering

Thesis for receiving a master's degree in the field of civil engineering of hydraulic structures, October 2013 This study is to quantitatively evaluate the effects of watershed operations and with the aim of evaluating the efficiency of projects

Number of pages: 185 Category: Industrial Engineering

Dissertation for receiving a master's degree in the field of industrial engineering, Shahrivar's industrial trend. 2013 Abstract: Many economists consider agriculture as the driving force of economic growth.

Number of pages: 192 Category: Management

Master's thesis in industrial management, financial orientation, abstract of the vision document and the general policies governing it, is a document that the Supreme Leader announced and pointed out that it is mandatory, that is why it is a mandatory document. Considering that the most important goal of the vision document 1404 is to achieve the first economic, scientific and ...

Number of pages: 124 Category: Geography - Urban Planning

Dissertation for Master's Degree (M.A.) Direction: Remote Sensing and Urban and Rural Geographical Information System Abstract: Subsidence phenomenon is one of the natural disasters that causes the reduction of underground resources such as underground water, oil, etc. One of the most important causes of land subsidence is the drop in static level and increase in effective ...

Number of pages: 110 Category: Computer Engineering

Dissertation for Master's Degree in Computer Science (M.Sc) Software Orientation Abstract Smart phones and other mobile devices are becoming an ideal platform for continuous measurement of user activities by a large number of embedded sensors. In this way, energy consumption has become the most important challenge for mobile devices. Individual activity detection on smart phones ...

Number of pages: 71 Category: Geography - Urban Planning

Thesis for obtaining a master's degree in natural geography majoring in climatology in environmental planning. Abstract Currently, the technology has reached its perfection in order to prevent the occurrence of harmful floods and to create awareness of the factors and elements of climate change. Therefore, any solution should be sought on earth, especially in the area of ??water ...

Number of pages: 98 Category: Civil Engineering

Dissertation for Master's Degree in Civil Engineering, Marine Structures, Abstract: Tension-based platforms are among economic marine platforms for use in deep waters. The correct prediction of the platform's dynamic response to environmental loads is very important in its economic and safe design. In this research, the dynamic behavior of the tension base platform under the ...

Number of pages: 159 Category: Civil Engineering

Dissertation to receive the master's degree in civil engineering ""M. Sc"" Major: Water. Abstract The aim of this thesis is to investigate the trend of annual rainfall changes in 37 selected stations in the whole of Iran using non-parametric method. The two Mann-Kendall tests and the age estimator, which are among the most common non-parametric methods, were used for the trend ...

Number of pages: 117 Category: Literature - Persian Language

The thesis for receiving a master's degree ""M.A"" is an abstract of Manouchehr Atshi from the generation of poets after Nima, he has understood Nima's time and he has a wealth of experience in Persian poetry of the past, however, the writers and critics have recognized the right to write about him. His poems do not have much influence in the society, but this issue never denies ...

Number of pages: 305 Category: Literature - Persian Language

Dissertation to receive the master degree of Persian language and literature ""M.A."" The abstract of the present research examines the elements of public culture in Marzban Nameh. Public culture is a collection of human experiences and thoughts over the centuries. It is the common experiences and traditions of a society that give it character and identity. The French ""Van ...

Number of pages: 117 Category: Civil Engineering

Master's thesis in the field of civil engineering - hydraulic structures Abstract: Rivers are one of the most important and common sources of drinking, agricultural and industrial water supply. These resources have many qualitative fluctuations due to passing through different platforms and direct connection with the surrounding environment. Therefore, predicting the quality of ...

Number of pages: 79 Category: Food and Packaging Industries

Dissertation for receiving a master's degree, specialization: food industry, abstract of osmotic dehydration, the process of removing water is based on the placement of food materials in a hypertonic solution. In this research, the combination of osmotic dehydration process for carrot pieces with a thickness of 0.5 cm at a temperature of 60 degrees Celsius and time intervals of ...

Number of pages: 81 Category: Food and Packaging Industries

Dissertation for receiving a master's degree, specialization: food industry, abstract of osmotic dehydration, the process of removing water is based on the placement of food materials in a hypertonic solution. In this research, the combination of osmotic dehydration process for kiwi pieces with a thickness of 0.5 cm at a temperature of 60 degrees Celsius and time intervals of ...

Number of pages: 117 Category: Electronic Engineering

Presented to graduate education management as part of the academic activities required to obtain a master's degree in the field of mechatronics. Abstract As you know, air conditioner is a high consumption device and has a Freon refrigeration cycle. What drew the companies to the production of inverters was to solve the shortcoming of air conditioners in high energy consumption. ...

Number of pages: 104 Category: Medical Sciences

Dissertation to receive the degree of Doctor of Dentistry Abstract Introduction: One of the best methods for reconstructing bone defects in the mouth and teeth of patients is the use of autogenous grafting, which is still considered as the gold standard for augmentation of bone deficient areas. There are numerous intraoral areas for the removal of this bone graft, the maxillary ...

Number of pages: 57 Category: Medical Sciences

Abstract Introduction: One of the most common types of fractures in the jaw and face area is the fractures of the middle area of ??the face and cheekbones, in which the anterior wall of the sinus is involved in the majority of these fractures. Following the fracture of the front wall of the sinus, soft tissue prolapse, sinusitis, rhinitis, pain and tenderness can occur when ...

Number of pages: 166 Category: Chemical - Petrochemical Engineering

Doctoral Dissertation in Chemical Engineering Abstract With the increase in population, the need for energy resources for mankind has also increased. Diesel, as an effective fuel, fulfills the need for transportation fuel in the world. Biodiesel, which is considered a renewable fuel and produces less harmful environmental effects, is produced from various sources, among which ...

Number of pages: 107 Category: Chemical - Petrochemical Engineering

Master's Thesis in Chemical Engineering Abstract Simulation of dynamic surface tension phenomenon in solvent oil systems based on permeation process is one of the prominent processes in the field of increasing extraction from oil reservoirs, gas injection. Therefore, a correct understanding of the mechanisms and how these processes are carried out is a big step towards ...

Number of pages: 121 Category: Electronic Engineering

Master of Mechatronics Abstract As you know, the air conditioner is a high consumption device and has a Freon refrigeration cycle. What drew the companies to the production of inverters was to solve the shortcoming of air conditioners in high energy consumption. To improve energy consumption in every part of the industry, one should pay attention to several parameters, it is ...

Number of pages: 179 Category: Chemical - Petrochemical Engineering

Dissertation for master's degree in chemistry and technology of essential oil Persian summary Yarrow genus in Iran has 19 species of perennial and often aromatic herbaceous plants, six of which are exclusive to Iran. Achillea filipendula with the Persian name of Zagros yarrow is one of the native species of this genus in Iran. Different parts of yarrow species are widely used in ...

Number of pages: 86 Category: Chemical - Petrochemical Engineering

Dissertation for M.Sc Master's degree, specialization: process engineering, abstract of the proposed project, the feasibility of converting gas condensates into products with higher added value and consumable fuels such as gasoline. Considering the huge gas and oil reserves in Iran, this country is one of the major importers of gasoline. Therefore, it is very necessary to ...

Number of pages: 70 Category: Agricultural Engineering

Thesis for obtaining a master's degree in the field: management, specialization: agriculture. Abstract This research was conducted in order to determine and identify the economic and social effects of watershed management operations in Lesbo area in Rodsar city, as well as to examine the views and opinions of villagers regarding the effectiveness of watershed management ...

Number of pages: 67 Category: Food and Packaging Industries

Persian Abstract Introduction: In the food industry, there is an increasing tendency to develop economic methods in order to prepare food products with high nutritional and sensory value. Drying is one of the most widely used methods for preserving fruits and vegetables. Citrus fruits are one of the most important tropical and sub-tropical fruits in the world, which are highly ...

Number of pages: 44 Category: Agricultural Engineering

Dissertation for Master's Degree (M.Sc.) in Horticulture, Physiology and Fruit Tree Breeding. Abstract The use of nano-fertilizers leads to increasing the consumption efficiency of nutrients, reducing soil toxicity, minimizing the negative effects of excessive fertilizer consumption, and reducing the frequency of fertilizer application. The use of Ascophyllum nodosum algae also ...

Number of pages: 57 Category: Food and Packaging Industries

Abstract Garlic (Allium sativum L.) is one of the most important medicinal and industrial plants of the Alliaceae family. Garlic onion prevents the proliferation of cancer cells and has antiseptic, insecticidal, anti-fungal and bacterial power, reduces blood pressure and sugar, anti-diarrhea, strengthens the digestive system, and is also used as a flavoring agent in the ...

Number of pages: 74 Category: Agricultural Engineering

Dissertation for Master's Degree in Agricultural Engineering (M.Sc) Major: Agriculture Abstract In order to investigate the effect of different sources of nitrogen and organic fertilizers on the yield and yield components of Single Cross 704 corn in the experimental area of ??Dehleran in the summer of 2012, it was studied as a split-plot experiment in the form of a randomized ...

Number of pages: 95 Category: Agricultural Engineering

Master's Thesis on Irrigation and Drainage Abstract In arid and semi-arid regions, wastewater treatment and its reuse is considered as an important factor in water resource planning. Some researchers believe that the use of treated wastewater in agriculture is a very suitable solution because the elements removed from the soil by the plants are returned to the soil and the risk ...

Number of pages: 139 Category: Biology - Environment

Dissertation for Master's Degree in Natural Resources Engineering - Forestry Abstract: Thinning breeding operations play an important role in the breeding of forest stands and provide various products to the market. In the first thinning, the ratio of cost to income is high, which needs to be studied to determine its profitability. In this research, the amount of production and ...

Number of pages: 149 Category: Industrial Engineering

The thesis of the Master's course in manufacturing and production, the abstract of this research, with an emphasis on the Traceable Resource Unit (TRU), information management and information exchange technology from livestock farming to the consumer's table, examines the concept of electronic traceability of food throughout the supply chain. To fulfill this responsibility, UML ...

Number of pages: 62 Category: Biology - Environment

Abstract In this research, the effect of different degrees of burial in windy sand on some physiological and vegetative characteristics of Qara Dagh and Rames species was measured. One-year-old saplings of Qarhadagh and Rames species were obtained from the nursery of the General Department of Natural Resources of Yazd province and subjected to five control treatments, burial ...

Number of pages: 76 Category: Agricultural Engineering

The thesis for obtaining a master's degree in the field of agriculture was carried out in order to investigate the effect of planting date and density on the growth characteristics and yield of experimental potato cultivars during 2013 in Mojn city of Shahrood city. The experiment was carried out in the form of factorial split-plot design based on randomized blocks in three ...

Number of pages: 61 Category: Food and Packaging Industries

Food Science Engineering Thesis for receiving the master's degree ""M. Sc"" Abstract Nitrate, nitrite and ascorbic acid are present in a wide range of foods. Vegetables are an important source of nitrate, nitrite and ascorbic acid absorption in the diet. The purpose of this research is to investigate the effect of frying and boiling process on the amount of nitrate, nitrite and ...

Number of pages: 87 Category: Agricultural Engineering

Master's thesis in the field of mechanics of agricultural machines (M.Sc) 1- Introduction Most horticultural plants, especially woody perennials, if they grow in suitable environmental conditions without human intervention, after a few years they will turn into trees or shrubs with dense branches. In such plants, the branches interfere with each other's growth and become twisted ...

Number of pages: 131 Category: Food and Packaging Industries

Thesis for receiving a master's degree in the field of agricultural engineering, food science and food industry, food technology, abstract. Halva in Iran, despite its high potential in diversity and creating added value, has not been industrially produced to date, and the purpose of this research is to investigate the formulation of wheat flour halva and its production and ...

Number of pages: 44 Category: Agricultural Engineering

Dissertation for Master's Degree (M.Sc) Abstract Chrysanthemum (Chrysanthemum morifolum L.) is one of the most important cut flowers in the world, which today ranks second in the world after roses in terms of economy and cultivation. One of the important problems of this flower is vascular blockage and disruption of the water balance. For this purpose, a study based on a ...

Number of pages: 66 Category: Agricultural Engineering

Dissertation for Master's Degree in Agricultural Engineering (M.Sc) Abstract This experiment was carried out to investigate the effect of different treatments on the dormancy of wild oat seeds in the form of a completely randomized design (CRD) in two phases, laboratory and greenhouse, in 2011. The tested treatments included potassium nitrate with percentages of 0.6, 0.4, and ...

Number of pages: 48 Category: Agricultural Engineering

Thesis for Master's degree (M.A.) Abstract In order to investigate the effect of planting date on dry matter allocation coefficients in soybean cultivars (DPX, Williams, Parshin), an experiment was conducted with 3 planting dates (June 30, July 9, and July 19) in the form of a randomized complete block design in four replications. In order to determine the dry matter allocation ...

Number of pages: 96 Category: Agricultural Engineering

Dissertation for Master's degree (M.Sc.) specialization: research on thyme essential oil compounds in different phenology stages in Qargh region (case study: Bakhtegan Wildlife Sanctuary 2) Abstract Medicinal plants produce a large and diverse group of organic compounds called secondary metabolites, which are consumed by humans as medicinal compounds. The value of the global ...

Number of pages: 51 Category: Agricultural Engineering

Thesis for Master of Science in Agriculture Abstract In order to investigate the effects of different levels of iron and the use of mulch on the growth and performance of beans in the agricultural year of 2013 for one season of autumn cultivation after harvesting peanuts in Salestan village of Astana Ashrafieh in Gilan province, it was carried out using a split-plot experiment ...

Number of pages: 93 Category: Agricultural Engineering

Dissertation for Master's Degree in Agricultural Engineering, Plant Pathology, Abstract The nematode Globodera rostochiensis had not been reported from Iran before 2007. The high contamination of the nematode in the potato fields of Hamedan province is considered a serious threat to the production of potatoes, which is the economic product of this region. Considering the ...

Number of pages: 66 Category: Agricultural Engineering

Thesis for obtaining a master's degree in the field of agriculture, specialization: agricultural management. Abstract Water is known as one of the most important basic resources in the development process in every human society. Water crisis is one of the important environmental challenges of the Middle East region. The present research was conducted with the aim of ...

Number of pages: 100 Category: IT Information Technology Engineering

Dissertation for receiving a master's degree in agricultural engineering majoring in agriculture, abstract of this project in order to investigate the effect of nitroxin fertilizer under the conditions of irrigation interruption (based on BBCH, plant phenology stages) on the physiological and agronomic traits of fodder millet cultivars in Damghan region in 2011-2019 as a ...

Number of pages: 105 Category: Agricultural Engineering

Dissertation for master's degree in horticultural science, fruit work, summary: the use of healthy compounds compatible with human health and nature is one of the important concerns of technology researchers after harvesting horticultural products. The purpose of this research was to investigate the effect of oral coating of aloe vera gel and calcium chloride on the shelf life ...

Number of pages: 61 Category: Agricultural Engineering

Dissertation for obtaining a master's degree (M.Sc) Abstract: In order to investigate the effect of different amounts of iron and sulfur on the yield and components of the peanut plant, a factorial experiment in the form of a randomized complete block design in 3 replications with 4 levels of sulfur fertilizer from the source of granular sulfur fertilizer (including 0, 40, 80 ...

Number of pages: 54 Category: Agricultural Engineering

Master's thesis in the field of agricultural engineering - horticultural sciences, specialization: ornamental plants. Abstract In order to investigate the effect of sodium nitroprusside on the flowering life of rose, sunflower and lisianthus cut flowers, a study was conducted in the form of a factorial experiment based on a completely randomized design with two sodium ...

Number of pages: 89 Category: Agricultural Engineering

Dissertation for Master's Degree in Horticulture-Fruit Science Abstract After being separated from the mother plant, the fruit is alive and breathes and undergoes significant changes after harvesting. The storage period of fruits can be increased by optimizing environmental conditions, minimizing mechanical damage and using beneficial compounds such as gibberellins and ...

Number of pages: 63 Category: Agricultural Engineering

An academic thesis for obtaining a master's degree in the field of agricultural engineering, agriculture, abstract, in order to determine the appropriate planting date and investigate the effect of mulch application on the growth and yield of experimental beans in the form of a randomized complete block design with three replications in the crop year of 2013, was carried out in ...

Number of pages: 41 Category: Agricultural Engineering

Dissertation for Master's Degree (M.Sc) Field: Horticulture Major: Ornamental Plants Abstract In order to investigate the effect of different waters on the life after harvesting of rose, chrysanthemum and gerbera cut flowers, a factorial experiment was carried out in the form of a completely randomized design in 3 replications with two factors: types of water (magnetic water, ...

Number of pages: 55 Category: Agricultural Engineering

Thesis for obtaining a master's degree in the field of: Agricultural Engineering, Agriculture and Plant Breeding. Abstract In order to investigate the effect of planting arrangement and plant density on the yield and yield components of broad beans, a factorial experiment was conducted with a basic design of randomized complete blocks of three replications in the city of Soumae ...

Number of pages: 92 Category: Agricultural Engineering

Dissertation for Master's Degree in Horticulture-Fruit Science Abstract Rish Baba grape variety is one of the most popular fresh edible cultivars cultivated in Iran, but usually the pods have poor color. In this study, the effect of ring removal and ethfen treatments on the quantitative and qualitative traits of 'Rish Baba Garmez' grape variety was investigated. The experiment ...

Number of pages: 84 Category: Agricultural Engineering

Thesis for obtaining a master's degree in the field: agricultural engineering, horticultural sciences, specialization: physiology and breeding of fruit trees. Abstract: Drought stress is one of the most important factors limiting the growth of plants in arid and semi-arid regions of the world, such as Iran. The importance of using water resources and the occurrence of recent ...

Number of pages: 134 Category: Agricultural Engineering

Thesis for receiving a master's degree in agricultural engineering, biotechnology in agriculture. Abstract This study was carried out in order to optimize the method of micropropagation of two native apple rootstocks (ornamental and jam) and to improve their establishment and branching stage. First, samples were taken from healthy and active branches of the mother trees of these ...

Number of pages: 117 Category: Agricultural Engineering

Dissertation for Master's Degree in Agriculture Abstract Thymes are perennial plants of the mint family and are among the most valuable medicinal plants in the world. In the genus of thyme, 215 species are distributed in the world and 18 species in Iran, of which Thymus daenensis L. is an exclusive species in Iran. In order to investigate the effect of iron chelate nano ...

Number of pages: 100 Category: Agricultural Engineering

Dissertation for receiving the master's degree ""M.Sc."" Orientation: Agriculture Abstract Effect of different levels of super absorbent (A-200) on the yield and yield components of wheat cultivar Shahriar at different levels of irrigation in two types of soil with different textures. This research was conducted in order to investigate the effect of the application of different ...

Number of pages: 31 Category: Agricultural Engineering

Dissertation for M.Sc. Abstract Orchids are among the most diverse family of flowering plants. This family has more than 800 genera and 25,000 species. Orchids come in a wide variety of sizes, shapes and colors. The lifespan of orchids after harvesting is also long. The large-scale increase of orchids using plant tissue culture techniques contributes to the position of this ...

Number of pages: 95 Category: Agricultural Engineering

Dissertation for Master's Degree in Agriculture and Plant Breeding Abstract to investigate the effect of urea fertilizer and sulfur-coated urea on the growth trend and quantitative and qualitative yield of fodder corn in the form of two randomized complete block designs with three replications of urea fertilizer at four levels of 0, 50, 100, and 150 kg per hectare and ...

Number of pages: 70 Category: Agricultural Engineering

Department: Plant Products Master's Thesis in Plant Products-Horticulture Abstract Rose (Rosa hybrida) is considered one of the most popular flowers in the world and its cut flower branch is the most used among other flowers. Due to the physiological reasons of being a rose cut flower, during its shelf life, it is highly susceptible to withering and reducing its freshness and ...

Number of pages: 82 Category: Agricultural Engineering

Thesis for obtaining a master's degree in the field: Agricultural Engineering-Horticultural Sciences, specialization: Physiology and breeding of fruit trees. Abstract Enzymatic browning is the most important physiological abnormality that strongly affects the post-harvest quality and storage life of Japanese parsnip. In order to investigate the effect of distilled water and a ...

Number of pages: 85 Category: Agricultural Engineering

Dissertation for master's degree in horticultural sciences, majoring in medicinal plants. Abstract Carum copticum L. is an annual plant belonging to the umbrella family that grows in Iran, India, Egypt and Europe. Among medicinal and aromatic plants, zenian is a plant on which little studies and researches have been done. The purpose of this research was to identify the best ...

Number of pages: 160 Category: Mining Engineering

Dissertation for Master's Degree in Rock Mechanics Abstract: Rock mass blasting ability is a very important feature in explosive designs in mines and construction activities, which is closely related to rock mass system, environmental conditions and blasting system. Among the factors affecting the explosiveness, there are controllable ones, and there are some that are ...

Number of pages: 56 Category: Agricultural Engineering

Dissertation for obtaining a master's degree in the field: horticulture, ornamental plants. Abstract This study was conducted in order to investigate the effect of nickel on the life after harvesting of gerbera flower in the form of a completely randomized design with three replications. Healthy gerbera flowers (Gerbera jamesonii cv. 'Intense') were purchased from a commercial ...

Number of pages: 78 Category: Agricultural Engineering

Effects of hormones and explants on calligenesis, regeneration and cell suspension culture in fennel (Foeniuculum vulgare) Introduction: Fennel (Foeniuculum vulgare) is a herbaceous, stable, aromatic plant from the family of Chetrian, which is used for food and medicine in different regions of Iran. Considering the importance of the compounds of this plant in the pharmaceutical ...

Number of pages: 105 Category: Agricultural Engineering

Dissertation for Master's Degree in Horticulture Science Summary: The use of healthy compounds compatible with human health and nature is one of the important concerns of technology researchers after harvesting horticultural products. The purpose of this research was to investigate the effect of oral coating of aloe vera gel and calcium chloride on the shelf life and quality ...

Number of pages: 154 Category: Agricultural Engineering

Dissertation for Master's Degree (M.Sc) in Agricultural Engineering - Agriculture, Abstract: Wheat is one of the most important agricultural products that is cultivated in Iran and the world, and its nutritional importance is clear to everyone. The food and economic importance of this product leads countries to strive for more production and self-sufficiency. In order to improve ...

Number of pages: 75 Category: Agricultural Engineering

Dissertation to receive a master's degree (M.Sc) field: plant production (horticultural product production trend) Thesis title: The effect of substrate types and planting date on the growth, yield and yield components of basil plant seeds (Ocimum basilicum.L) in order to study the effect of substrate types and planting date on basil seed yield during the years 1992-1991 in a ...

Number of pages: 87 Category: Agricultural Engineering

Academic Thesis for obtaining a master's degree in the field of: Agricultural Engineering, Agricultural Management, Abstract Based on the research, the amount of damage caused to agricultural products by weeds, diseases, insects, and other pests has been determined as 45, 30, 20, and 5 percent of the total damage caused to agricultural products, which is about 35 percent. ...

Number of pages: 49 Category: Food and Packaging Industries

Dissertation for Master's Degree in Food Science and Technology, Food Technology, Abstract: In addition to changing the organoleptic characteristics of food, oxidation of oils reduces the nutritional value and shelf life of oils and is harmful to the health of consumers due to the production of undesirable compounds in oil. To prevent oxidation, there are several methods, one of ...

Number of pages: 99 Category: Agricultural Engineering

Master's thesis in the field of agriculture and plant breeding, agriculture trend. Abstract In order to investigate the effects of plant smoke extract and aerosol smoke on germination rate, germination percentage, root length, shoot length, seedling weight, seedling root and root to shoot ratio, as well as some growth indicators, in three medicinal plants, fox berry, chamomile ...

Number of pages: 92 Category: Agricultural Engineering

In order to obtain a master's degree in the field of agricultural engineering-agronomy, in order to evaluate the effect of nitrogen and water deficit stress during vegetative and reproductive growth on the growth and yield of two varieties of corn, a factorial split plot experiment was conducted in the form of a randomized complete block design with three replications in the ...

Number of pages: 94 Category: Animal Husbandry - Poultry Farming

Dissertation for Master's Degree in Animal Science Abstract: In order to determine the chemical composition and physical properties of the second layer of alfalfa fodder in West Azarbaijan province, 72 samples were collected based on randomly classified sampling according to the amount of precipitation in 3 climates (treatments) including: 1) the northern basin of Urmia Lake ...

Number of pages: 90 Category: Agricultural Engineering

Dissertation for obtaining a master's degree in the field of: Agricultural Engineering, Agricultural Management. Abstract: The dispersion and smallness of land is one of the traditional structural elements of the country's agriculture, which today has become one of the main obstacles to agricultural development. The most important goals that the implementation of the plan for ...

Number of pages: 73 Category: Agricultural Engineering

Thesis for obtaining a master's degree in the field of: Agricultural Engineering, Agricultural Management, Abstract The amount of damage caused to agricultural products by weeds, diseases, insects, and other pests has been determined as 45, 30, 20, and 5 percent of the total damage caused to agricultural products, which is about 35 percent. Although chemical control has been ...

Number of pages: 78 Category: Agricultural Engineering

Dissertation for obtaining a master's degree in the field: Agricultural Engineering, specialization: Agricultural Management. Abstract In order to investigate the irrigation management of tobacco, which is one of the valuable agricultural and industrial products and is cultivated in different climatic conditions, an experiment was conducted in the form of split plots based on ...