Download the thesis about geotechnical parameters of the soil✅ Word Document

Download more than 100 examples of thesis, proposal and project topics about geotechnical parameters of the soil in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.

Number of pages: 106 Category: Civil Engineering

In order to obtain a master's degree in the field of civil engineering - soil and foundation orientation, Abstract Nowadays, circular foundations are more or less used for structures, especially structures that have axial symmetry. In this research, a numerical study was conducted on bearing capacity and settlement of annular foundation. PLAXIS software was used for modeling. ...

Number of pages: 83 Category: Civil Engineering

Master's Thesis (M.sc) Civil Engineering, Soil and Foundation Mechanics Abstract In this research, the stability of soil reinforced with geogrid located on an underground cavity was analyzed using plaxis software, and the effect of several factors such as the number of geogrid layers, the length of the geogrid layer, the stiffness of the geogrid layer, the optimal location of ...

Number of pages: 109 Category: Civil Engineering

Dissertation for receiving a master's degree in the field of civil engineering with a focus on soil and foundation. Abstract: The compressibility behavior of soils has become an important concern in geotechnical engineering. As buildings, embankments and roads are implemented, significant settlements often occur. Since long-term settlements occur due to creep, therefore, the ...

Number of pages: 135 Category: Civil Engineering

Thesis for obtaining a master's degree in the field of civil engineering, oriented towards soil and foundation mechanics, Shahrivar   2013 Abstract Dams are always considered as infrastructure structures

Number of pages: 104 Category: Civil Engineering

Master's Thesis in Civil Engineering - Earthquake Engineering March 2012 Abstract Reinforced soil is a special material that is created from the combination of soil and reinforcing member. Arming components resistant to N

Number of pages: 169 Category: Civil Engineering

Dissertation for Master's Degree in Civil Engineering, Soil and Foundation Mechanics Abstract: Since many structures are built in dense urban areas, there is an increasing need to build buildings and geotechnical structures on soft clay soils. Clay soils usually show significant creep deformation. Although a lot of research has been done on the creep behavior of natural clay, ...

Number of pages: 130 Category: Civil Engineering

Dissertation for Master's Degree in Civil Engineering - Soil and Foundation Mechanics Abstract The purpose of this research is to improve the mechanical and geotechnical properties of windy sand soils. Because one of the major problems of windblown sand is its low resistance under natural and saturated moisture conditions, a laboratory study was conducted to investigate the ...

Number of pages: 105 Category: Civil Engineering

Dissertation for receiving a master's degree in civil engineering, soil mechanics, and the abstract of the contents, one of the most important and at the same time the most difficult topics in soil mechanics is the problem of the stability of gables. Analyzing the stability of soil slopes in order to determine the most probable rupture process or in other words to find the ...

Number of pages: 120 Category: Civil Engineering

Abstract Underground facilities are an integral part of modern society and are used for many applications, including subways and railway lines, highways, material storage and water and sewage transportation. is used Underground facilities built in areas affected by earthquake activity must withstand both earthquake and static loading. By reviewing the historical cases of ...

Number of pages: 91 Category: Civil Engineering

Civil Engineering Master's Thesis - Soil and Foundation Mechanics Abstract From the past until now, one of the most economical methods to improve the mechanical properties of clay soils has been stabilization by means of additives such as lime and cement in construction projects such as road construction and consolidation of building foundations. Also, with the passage of time ...

Number of pages: 134 Category: Civil Engineering

Tendency of soil mechanics and foundations. Abstract: Investigating the behavior of soils due to different loadings is one of the most important issues in geotechnical engineering. The behavior of soils depends on several parameters such as grain size, grain type, loading method, stress history, etc. Non-alignment of main stress and main strain directions is a phenomenon that ...

Number of pages: 136 Category: Civil Engineering

Dissertation for Master's Degree in Civil Engineering, Soil Mechanics and Foundation Abstract: Dams are always considered as infrastructure structures and have vital value. In the past, dams were mainly built for the purposes of providing drinking water and irrigation of agricultural fields, but today, due to the need for hydroelectric energy and other purposes, it has been ...

Number of pages: 171 Category: Facilities - Mechanics

Dissertation for a master's degree in civil engineering, soil and foundation mechanics. Abstract: Since many structures are built in dense urban areas, there is an increasing need to build buildings and geotechnical structures on soft clay soils. Clay soils usually show significant creep deformation. Although a lot of research has been done on the creep behavior of natural clay, ...

Number of pages: 135 Category: Civil Engineering

In order to receive a master's degree in civil-soil and soil engineering in March 2013, abstract, different methods are used to stabilize pits, among them nailing method and ink method.

Number of pages: 143 Category: Civil Engineering

Civil engineering, soil and foundation, abstract, considering that all engineering infrastructures and vital urban and non-urban places and arteries such as: foundations of buildings, bridges, silos, dams, retaining walls, marine structures, industrial facilities, etc. . . All spread on a platform called the earth. The importance of investigating the type of instability in ...

Number of pages: 154 Category: Mining Engineering

Dissertation in order to receive a Master's Degree in Rock Mechanics Abstract In open pit mining where many steps are created, it is necessary to conduct stability studies of the wall slope. By increasing the slope angle of the mine, the ratio of tailings removal is reduced, which will save the overall costs of the mine, but on the other hand, it will reduce the safety, in case ...

Number of pages: 138 Category: Civil Engineering

Dissertation for M.Sc degree in soil and soil mechanics engineering, summer 2013, first chapter, introduction of micro candles 1-1 Micro-candles in general in dealing with problematic soils

Number of pages: 68 Category: Facilities - Mechanics

Dissertation for M.Sc degree, specialization: manufacturing and production, abstract in this thesis, how to improve the properties of plastics with the help of heat treatment. First, we will talk briefly about polymers, plastics and their sub-branches and heat treatment on them, and then we will discuss the effect of annealing heat treatment on heavy polyethylene sheets that are ...

Number of pages: 100 Category: Civil Engineering

Thesis for receiving the degree of M.Sc. Trend: soil and soil in February 2013 Abstract: Allowed load capacity or safe load capacity is a virtual pressure that is within the range of

Number of pages: 58 Category: Geography - Urban Planning

Dissertation for M.A. Orientation: Natural Geography (Geomorphology-Hydrology) Abstract The increasing population growth followed by the development of industrial activities on the one hand and non-compliance with environmental requirements on the other hand, has caused huge amounts of pollutants to enter the environment in the last few decades. Accumulation of some dangerous ...

Number of pages: 58 Category: Geography - Urban Planning

Dissertation for M.A. Orientation: Natural Geography (Geomorphology-Hydrology) Abstract The increasing population growth followed by the development of industrial activities on the one hand and non-compliance with environmental requirements on the other hand, has caused huge amounts of pollutants to enter the environment in the last few decades. Accumulation of some dangerous ...

Number of pages: 96 Category: Geography - Urban Planning

Dissertation for receiving the M.A. degree in the Department of Geography. The field of natural geography, the trend of climatology in environmental planning, is the abstract of a flood, a water flow that exceeds the capacity of the river channel and then flows into the adjacent floodplain. Although many local hydrological factors related to the catchment may affect the flood, ...

Number of pages: 134 Category: Civil Engineering

Doctoral Dissertation of Soil and Foundation Mechanics Abstract In this research, the discrete element method was used to analyze the wave propagation and investigate the factors affecting the wave speed in granular soils. The method of separate elements is important due to the possibility of preparing completely similar samples and checking the effect of changes of a certain ...

Number of pages: 94 Category: Civil Engineering

Master's Thesis in Civil-Soil Field Abstract Dense clay layers are used as one of the most common impermeable layers in most geotechnical structures such as earthen dams and municipal and radioactive waste disposal centers. Due to special geotechnical characteristics, these layers are damaged by cracking during their lifetime, these cracks increase the permeability of the layer ...

Number of pages: 82 Category: Civil Engineering

Dissertation for receiving M.SC Master's degree Major: Water Engineering Abstract: Dams are the largest man-made structures. Their design often stems from their unique nature and the consequence of failure, which is certainly greater than the collapse of other types of structures. The stability of dam body and foundation structures can be analyzed and checked in various ways. ...

Number of pages: 117 Category: Civil Engineering

Civil Engineering Master's Thesis, Soil and Foundation Engineering Abstract In this thesis, in order to analyze the behavior of surface foundations based on reinforced soil, a simple physical method based on the resistance of materials called ""cone method"" is used, which is actually used as an alternative to the exact solution methods that are based on the three-dimensional ...

Number of pages: 113 Category: Biology - Environment

Dissertation for receiving a Master's degree (M.Sc.) specialization: Environment Abstract Gaseous liquids obtained from the refining of sour gases are also sour and contain a large percentage of hydrogen sulfide and mercaptans. Therefore, after distilling and preparing the products, it needs refining processes to remove or reduce the amount of sulfur and mercaptans present. ...

Number of pages: 225 Category: Chemical - Petrochemical Engineering

Dissertation of the Ph.D course in Chemical Engineering, Biotechnology, Abstract: Clostridium Langali is a highly anaerobic estogenic bacterium that can grow on synthesis gas components, i.e. CO and H2/CO2, and convert them into ethanol and acetate at ambient temperature and pressure. During this process, the bacterium shows a complex metabolic pathway that includes both ...

Number of pages: 104 Category: Agricultural Engineering

Master's Thesis in Soil Science Abstract: Today, tracking in water and soil issues has found a much wider application compared to the past. Examining the hydraulic connection and hydrodynamic characteristics of underground water tables, evaluating the origin and spread of pollution are among the most important applications of this method. In our country, along with the ...

Number of pages: 100 Category: Agricultural Engineering

Dissertation for receiving the master's degree ""M.Sc."" Orientation: Agriculture Abstract Effect of different levels of super absorbent (A-200) on the yield and yield components of wheat cultivar Shahriar at different levels of irrigation in two types of soil with different textures. This research was conducted in order to investigate the effect of the application of different ...

Number of pages: 83 Category: Civil Engineering

Dissertation for obtaining a master's degree in civil engineering. 2013 Winter Earthquake Abstract of earthquakes close to the fault due to having pulse type movement with a long period at the beginning of the record, including

Number of pages: 115 Category: Civil Engineering

Master's Thesis in Civil Engineering - Structural Orientation, February 2013 Abstract: The performance of a building during an earthquake depends on many factors, as a result, predicting the seismic performance of structures should be considered either explicitly or implicitly as part of the design or evaluation. Predicting the seismic response of the structure is very ...

Number of pages: 135 Category: Geography - Urban Planning

Dissertation for obtaining a master's degree in the field: Geography and Tourism Planning Abstract: Due to the increase in population and the resulting pressure on natural resources and the environment, tourism can also leave favorable and unfavorable effects on the environment. Lahijan city is one of the most tourist-friendly cities in Gilan province and has favorable natural ...

Number of pages: 132 Category: Geography - Urban Planning

Dissertation for obtaining a master's degree in the field: Natural Geography, specialization: Geomorphology in environmental planning. Abstract: Flood is one of the most destructive natural disasters, which is usually associated with a lot of human and financial losses. Floods every year in the corners of the country cause a lot of damage to economic resources. The occurrence of ...

Number of pages: 129 Category: Geography - Urban Planning

Dissertation for M.Sc Master's Degree in Remote Sensing and Geographical Information System - Water and Soil Resources Abstract One of the important issues in crisis management of unexpected natural events, especially earthquakes, is optimal location in order to accommodate citizens during or after an accident. One of the major problems of the organizations involved in urban ...

Number of pages: 122 Category: Geography - Urban Planning

Thesis for obtaining a master's degree in the field: Geography, specialization: Climatology in environmental planning. Abstract: In this research, the monitoring and zoning of drought as well as the investigation of its different dimensions in the country of Iran using statistics and information related to precipitation and temperature for 30 years (1981-2010) of the country's ...

Number of pages: 82 Category: Geography - Urban Planning

Dissertation for receiving a master's degree (M.A) in the field of geography and climatology in environmental planning. Abstract Due to the significant role of snow cover in the hydrological cycle, it seems necessary to investigate the characteristics of snow cover (snow cover level) with a high spatial and temporal resolution. The measurement of this parameter is generally done ...

Number of pages: 72 Category: Geography - Urban Planning

Master's Thesis in Remote Sensing and Geographical Information System (M. Sc. Orientation: Urban and Rural Abstract Considering the growth of the population today, agglomeration and settlement is an urgent need. Locating and allocating land is considered as a main pillar, which is done traditionally and by trial and error in most cases. Many criteria are involved in locating the ...

Number of pages: 124 Category: Civil Engineering

Master's Thesis in Civil Engineering - Roads and Transportation) Overview Pavements are usually affected by various factors that affect their life. Since a road passes through different areas where the subsoil, the type and volume of traffic and the climatic conditions of these areas are different from each other, therefore, various disadvantages and defects arise in different ...

Number of pages: 149 Category: Civil Engineering

Dissertation for receiving the master's degree ""M. Sc."" Field: Agricultural Engineering Major: Water Structures Abstract The sediment transfer process is a completely complex, variable and non-linear phenomenon. So that the behavior of the river in the sediment transfer capacity for a certain discharge is different in different times. Therefore, due to the complexity of the ...

Number of pages: 99 Category: Civil Engineering

To receive a master's degree in civil engineering - water Abstract: Relaxation ponds should be designed in such a way that they can depreciate the potential energy stored in the reservoir water of dams and dams in such a way as to transfer it to the natural bed so as not to cause the loss of the bed and in critical conditions to destroy the pond and dam itself. In different ...

Number of pages: 232 Category: Civil Engineering

Dissertation for Master's Degree in Civil Engineering - Earthquake Engineering Abstract The city of Birjand, as the capital of South Khorasan province, is located in the structural zone of Sistan, which is particularly sensitive due to its proximity to seismic and fundamental faults (Neh Khawri and Westi faults in the south, Ardkol fault in the northeast, Nawaz fault in the ...

Number of pages: 175 Category: Civil Engineering

Master's thesis in the field of civil engineering, structural orientation. Abstract: Investigating the effect of span length on bridge behavior under the simultaneous effect of horizontal and vertical components. Among all types of structures, bridges are one of the pillars of vital arteries that need to be used after an earthquake to provide access to hospitals, fire stations, ...

Number of pages: 155 Category: Civil Engineering

Dissertation for M.A. degree Abstract of this research, knowing the conditions governing the Fahlian River, determines the Manning roughness coefficient in the studied area using various experimental and semi-experimental methods and tables for use in designs. And it presents the best and most reliable method of determining the roughness coefficient using field studies and ...

Number of pages: 115 Category: Civil Engineering

Master's thesis in the field of civil engineering (hydraulic structures) abstract of sediment transfer and sedimentation, the consequences such as the creation of sediment islands in the river path and as a result the reduction of flood flow transfer capacity, corrosion of river structures and It includes other problems. Also, suspended sediments affect the quality of water for ...

Number of pages: 151 Category: Civil Engineering

Master's thesis in the field of civil engineering, soil and foundation, today, due to the progress of the tunneling industry, the need to analyze and design underground structures in rocky environments is felt more than in the past. Although there are many numerical and practical software available in this field, none of them are complete and perfect in all fields, and each of ...

Number of pages: 231 Category: Civil Engineering

Dissertation to receive M.Sc degree in civil engineering, structural orientation. Abstract: One of the ways to strengthen the building against lateral loads is the use of a wind system (convergent or divergent). The increasing use of steel braces to deal with earthquake forces requires that the seismic performance of these types of systems be given more attention. The common ...

Number of pages: 174 Category: Civil Engineering

Dissertation for master's degree in civil engineering, structural orientation. Abstract: Today, in earthquake-prone countries, it is recommended to use a variety of energy-depleting tools in order to dissipate the energy of earthquakes on the structure. One of these tools is rotational friction dampers. Because the current regulations do not provide a value for the coefficient ...

Number of pages: 222 Category: Civil Engineering

Master's Thesis on Hydraulic Structures Abstract: Washing water around the existing structures in the flow path is one of the important issues that should be considered in the design of such structures. For this purpose, the investigation of this phenomenon around the circular bases in the condition of clear water was carried out in laboratory physical modeling. For this ...

Number of pages: 109 Category: Electrical Engineering

Dissertation for Master's Degree in Mechatronics Engineering Persian Abstract The purpose of this project is to introduce a new approach for troubleshooting gas transmission pipelines using mechanical waves, which is much cheaper and easier than other methods. who are currently working. These lines are usually located in difficult environmental conditions and far away and in ...

Number of pages: 137 Category: Electronic Engineering

Dissertation for master's degree in electrical engineering, power trend. Abstract Overvoltages are one of the most important factors that destroy and threaten the insulation of power network equipment and often cause interruptions in service and reduce the quality of power and reliability of the system. In addition, transient overvoltages caused by lightning are more common and ...

Number of pages: 128 Category: Civil Engineering

Master's thesis in the field of civil engineering, soil and foundation, in this research, the bearing capacity of the conical pile group and the cylindrical pile group with the same volume are calculated and compared. Due to the lack of numerical studies and modeling by software for conical piles compared to laboratory tests in this field, in this research, the modeling of the ...

Number of pages: 105 Category: Civil Engineering

Dissertation for Master's Degree in Civil Engineering, Hydraulic Structures, Abstract: It is obvious that water resources are essential for the life of living organisms and especially for human life. Drainers are a set of structures that are used to transfer water from the dam lake to the discharge point downstream. Therefore, due to the importance of this part of the dam, the ...

Number of pages: 104 Category: Civil Engineering

Master's thesis in the field of civil engineering, soil mechanics, and abstract excavation projects in urban areas are always at risk. Therefore, a suitable safety margin should be considered in the design of the guard structure. Traditional slope stability assessment methods, which are usually based on empirical judgments such as the concept of confidence factor and limit ...

Number of pages: 166 Category: Chemical - Petrochemical Engineering

Doctoral Dissertation in Chemical Engineering Abstract With the increase in population, the need for energy resources for mankind has also increased. Diesel, as an effective fuel, fulfills the need for transportation fuel in the world. Biodiesel, which is considered a renewable fuel and produces less harmful environmental effects, is produced from various sources, among which ...

Number of pages: 90 Category: Chemical - Petrochemical Engineering

Master's degree thesis in the field of chemical engineering, thermokinetic and catalyst orientation. Abstract The purpose of this research is to estimate the electrical conductivity of natural waters based on modern mathematical methods. To achieve this, the waters of the Karaj and Jajrud rivers are considered as special cases. For this purpose, 20 sampling stations were ...

Number of pages: 101 Category: Electrical Engineering

Master's thesis in the field of electrical-power engineering Abstract: The ground system refers to a set of conductors with different structures that are placed in the ground to protect equipment, human safety against electrocution, prevent unwanted overvoltages and damage to HV equipment. The importance of earth resistance is because it plays an important role in protecting the ...

Number of pages: 118 Category: Electrical Engineering

Dissertation for master's degree in electrical engineering, power trend. Abstract Overvoltages are one of the most important factors that destroy and threaten the insulation of power network equipment and often cause interruptions in service and reduce the quality of power and reliability of the system. In addition, transient overvoltages caused by lightning are more common and ...

Number of pages: 97 Category: Animal Husbandry - Poultry Farming

Master's Thesis in Animal Science, Livestock and Poultry Nutrition Abstract This experiment was designed and implemented with the aim of investigating the effects of garlic or fresh onion supplementation on performance, immune system and blood lipid profile in broilers. For this purpose, 308 out of 432 day-old male chicks were divided into nine groups with four replicates and 12 ...

Number of pages: 115 Category: Food and Packaging Industries

Master's Thesis in Food Industry (M.Sc) Abstract Walnut kernel is an edible substance that has a lot of fat, protein, sugar and starch, but due to various reasons, it undergoes physical and chemical changes very quickly and loses its quality. The purpose of this study was the effect of packaging and storage conditions on the quality and shelf life of walnuts. In the research ...

Number of pages: 62 Category: Biology - Environment

Abstract In this research, the effect of different degrees of burial in windy sand on some physiological and vegetative characteristics of Qara Dagh and Rames species was measured. One-year-old saplings of Qarhadagh and Rames species were obtained from the nursery of the General Department of Natural Resources of Yazd province and subjected to five control treatments, burial ...

Number of pages: 105 Category: Agricultural Engineering

Dissertation for Master's Degree (M.Sc.) Abstract This experiment was conducted to investigate the potential of using silkworm waste compost as an organic fertilizer in order to reduce or at least adjust the amount of chemical fertilizers used and also to determine the best compost mixture for the ornamental plant Syngonium podophyllum. The treatments were: silkworm waste ...

Number of pages: 106 Category: Agricultural Engineering

Abstract: Salinity stress is one of the most important abiotic stresses in the world, and its negative effects on the growth of agricultural plants have led to an increase in research on salinity tolerance with the aim of improving plant tolerance. In addition to increasing growth, potash fertilizers help to improve product quality and increase plant resistance against adverse ...

Number of pages: 106 Category: Agricultural Engineering

Dissertation for Master's Degree in Water Resources Engineering Abstract Nowadays, due to the issue of water crisis and the need for accurate planning, the use of statistical models and methods is increasing. The research conducted in this field has also shown the usefulness of using statistical methods. The use of different forecasting methods has many advantages, including ...

Number of pages: 134 Category: Agricultural Engineering

Thesis for receiving a master's degree in agricultural engineering, biotechnology in agriculture. Abstract This study was carried out in order to optimize the method of micropropagation of two native apple rootstocks (ornamental and jam) and to improve their establishment and branching stage. First, samples were taken from healthy and active branches of the mother trees of these ...

Number of pages: 56 Category: Food and Packaging Industries

Abstract This research was conducted in order to investigate the absorption characteristics of cobalt, cadmium and nickel metals using lemon peel. The effect of different parameters such as solution pH, amount of adsorbent, contact time and temperature on the absorption process was investigated and the optimal operating conditions for the absorption of each element on the ...

Number of pages: 101 Category: Biology - Environment

Master's thesis in the field of forestry Vegetative, physiological and genetic responses of two Zagros oak species (Q. brantii and Q. libania) under drought stress Abstract Zagros forests account for about 40% of the total forests of Iran and have the greatest impact on water supply, soil conservation, climate adjustment and economic-social balance in the whole country. These ...

Number of pages: 168 Category: Mining Engineering

Dissertation for Master's Degree in Rock Mechanics Introduction Excavations made in rocks have different dimensions according to their purpose and vary from small dimensions to dimensions comparable to huge concrete structures. Surface excavations can be used as a space for extracting mines, creating buildings, and supporting and overflowing dams, factories, power plants, as ...

Number of pages: 89 Category: Biology - Environment

Master's Thesis in Mechanical Engineering, Energy Conversion, Abstract Due to the lack of fresh water resources, it is of great importance to discover new ways of water production. One of the new methods of producing fresh water in low capacity is the use of air humidity, which is known as condensation water production system. In this method, the flow of hot and humid air is ...

Number of pages: 145 Category: Textile Industries

In order to receive a master's degree in textile technology, it is essential to know the physical and mechanical properties of carpets to produce a quality product and maintain the proper appearance. In this research, an attempt has been made to provide a model to determine the relationship between the different parameters of these characteristics, therefore, to measure these ...

Number of pages: 118 Category: Chemical - Petrochemical Engineering

Doctoral thesis in the field of chemical engineering. Abstract The study of the effective parameters in the synthesis of silver nanoparticles by the inverse microemulsion method of metallic silver nanoparticles is of interest due to their use as catalysts, antimicrobial agents and biosensors. The practical use of silver nanoparticles is highly dependent on the size distribution ...

Number of pages: 158 Category: Facilities - Mechanics

Dissertation for obtaining a doctorate degree in the field of mechanical engineering - manufacturing and production: the advantages of using semi-solid processes are reducing the amount of gas porosity and shrinkage and modifying the microstructure, which aims to improve the mechanical properties of the part. In this research, the cooling ramp method has been used to produce the ...

Number of pages: 144 Category: Facilities - Mechanics

Master's thesis in the field of mechanical engineering, energy conversion trend. Abstract: Considering that heat transfer is widely used in various fields of science, it is necessary to use wide recessed or raised surfaces due to physical and spatial limitations in electrical systems. The main purpose of using these surfaces is to increase heat transfer by increasing the ...

Number of pages: 84 Category: Agricultural Engineering

Thesis for obtaining a master's degree in the field: agricultural engineering, horticultural sciences, specialization: physiology and breeding of fruit trees. Abstract: Drought stress is one of the most important factors limiting the growth of plants in arid and semi-arid regions of the world, such as Iran. The importance of using water resources and the occurrence of recent ...

Number of pages: 170 Category: Animal Husbandry - Poultry Farming

Dissertation to receive a Master's degree (M.Sc.) in the field of Animal Science, Animal Nutrition, Abstract: Poultry breeding has taken a special place to provide part of the nutritional needs of the society, and the current society has correctly recognized this position and it is expanding every day. Therefore, it is very important to try as much as possible to improve the ...

Number of pages: 133 Category: Civil Engineering

Dissertation for receiving a master's degree in the field of structural oriented civil engineering, 2013, although the construction and design methods of structures have expanded over the years, but still the effect of earthquakes is one of the most important.

Number of pages: 209 Category: Civil Engineering

Thesis of master's degree in civil engineering, soil and foundation mechanics orientation, September 2019, abstract: analysis of dynamic interaction between soil and structure (due to the mutual effect of the structure and its retaining soil on each other), D

Number of pages: 112 Category: Nutritional Sciences

Dissertation of master's course in the field of educational sciences, history and philosophy of education, winter 93 Abstract: This research aims to analyze the content of moral concepts and themes in the Holy Quran and with the aim of

Number of pages: 136 Category: Facilities - Mechanics

Chapter 1 1-1-Introduction: Common fluids such as water, oils and ethylene glycol, which are usually used as heat transfer media, have a limited ability in terms of thermal properties, which is the first obstacle to compress and increase the efficiency of heat exchangers. One of the ways to improve heat transfer is to add particles to the fluid. This method is used for fluids ...

Number of pages: 185 Category: Industrial Engineering

Dissertation for receiving a master's degree in the field of industrial engineering, Shahrivar's industrial trend. 2013 Abstract: Many economists consider agriculture as the driving force of economic growth.