Download the thesis about gas wear✅ Word Document

The master's thesis of precision instruments and automation in the oil industry. The introduction of the entire research is one of the important scientific, technical and economic topics, the issue of corrosion of metals and the protection of metal facilities. Investigating the topic of corrosion is not so simple and with all the research done, its factors are still not known ...

Master's Thesis of Precision Instrumentation and Automation in the Oil Industry. Abstract: Corrosion rate prediction and wear rate constant in gas brain tube using neural network is a phenomenon that is very complex due to the influence of various factors and cannot be modeled easily. In order to predict and model corrosion, attention is paid to its physical, chemical and ...

Dissertation for Master's Degree in Mechatronics Engineering Persian Abstract The purpose of this project is to introduce a new approach for troubleshooting gas transmission pipelines using mechanical waves, which is much cheaper and easier than other methods. who are currently working. These lines are usually located in difficult environmental conditions and far away and in ...

A master's thesis in the field of chemical engineering. Abstract of the laboratory study of the wear phenomenon of gas containing sand and liquid droplets in pipelines. For this purpose, a pipeline test device including: vertical and horizontal pipelines and various connections has been made. The studied fluid consists of three phases: gas, liquid and solid. The gas phase is ...

Thesis for master's degree in the field: chemical engineering Abstract Hard polyurethane[1] is always considered one of the most effective and practical polymers in various industries, especially the coating industry. Excellent adhesive property, curing ability at ambient temperature and corrosion resistance of this polymer are some of its remarkable features. This study was ...

Master's Thesis in the field of Chemical Engineering (no orientation) Abstract of the laboratory study of the wear phenomenon of liquid containing sand in pipelines. The studied fluid consists of two phases, liquid and solid. The liquid phase is water, and sand particles form the solid phase. In this research, the parameters affecting the wear rate, including: fluid speed, sand ...

The effectiveness of the regulations of detailed plans on the renovation and improvement of the dilapidated fabric of Isfahan city. Abstract Considering the problems existing in big cities, such as the expansion of the city on the surrounding valuable agricultural lands and the spatial-physical wear and tear of the inner fabrics of the city, the need to adopt methods and ...

Dissertation to receive the master's degree ""M.S.c"" specialization: Textile chemistry and fiber science Abstract: One of the important processes in the completion of textile goods is the underhand improvement in textiles. Finishing the softener provides a desirable softness to the fabric and improves its properties, and the main goals of the softener are to reduce static ...

To receive a master's degree in textile technology engineering. Abstract In the previous research, multi-sized nano-roughness was developed using nanoparticles with different sizes and different surface charges along with silicone resin coating to produce multi-purpose textiles with stable properties. In this research, the idea of ??using laser irradiation and finishing textiles ...

The effect of fiber and pozzolanic materials on the mechanical properties of glass fiber reinforced concrete Master's Thesis of Civil-Structural Engineering Abstract The failure and destruction of concrete is highly dependent on the formation of cracks and microcracks. With increasing loading, microcracks are connected and form cracks. In order to solve this problem and also to ...

Introduction In today's era, the presence of waste materials resulting from various physical and chemical processes is one of the important problems of industrialized and developing countries. So that extensive research is being carried out for methods of recycling or disposing of them to minimize the damage to the environment. In this regard, construction researchers, like ...

Master's thesis in the field of polymerization engineering, abstract was determined by using experimental design methods to determine the optimal feed recipe for the preparation of nitrile rubber. Initially, to determine the factors affecting the rate of polymerization, screening tests were designed according to the Plate-Boorman method, which examines a large number of factors ...

Master's thesis in the field of mechanical engineering - energy conversion trend Abstract: In this research, the turbulent flow of a non-Newtonian nanofluid in a microchannel with a circular cross-section is simulated. First, the types of classification of microchannels, the methods of making microchannels, as well as the advantages and challenges of using microchannels are ...

Dissertation for M.Sc Mechanical Engineering - Energy Conversion Orientation Abstract: In this research, the turbulent flow of a non-Newtonian nanofluid in a microchannel with a circular cross-section is simulated. First, the types of classification of microchannels, the methods of making microchannels, as well as the advantages and challenges of using microchannels are stated. ...

Abstract: Research in the field of heat transfer of suspensions with nanometer-sized solid particles in the base fluid has started in the last decade. Recent research in the field of nanofluids has shown that the addition of nanoparticles causes a significant increase in the heat transfer of the suspension. Another common way to improve the thermal performance of devices is to ...

Master's thesis in the field of mechanics, specialization: mechanical engineering - energy conversion. Abstract: One of the most important components of fluid transmission systems are control valves, which can be seen in different routes of oil and gas transmission pipelines, etc. In control valves, the most important issue is the property of the flow in order to achieve the ...

Mechanical Engineering, Manufacturing and Production Department, Master's Thesis, Introduction High-speed rolling bearings have many applications in rotating machines, whose task is to separate the rotating parts from the fixed parts of the machine. Accuracy is very important in machine tool applications and bearing corrosion resistance in chemical machines. In aerospace ...

Dissertation for M.Sc degree, specialization: manufacturing and production, abstract in this thesis, how to improve the properties of plastics with the help of heat treatment. First, we will talk briefly about polymers, plastics and their sub-branches and heat treatment on them, and then we will discuss the effect of annealing heat treatment on heavy polyethylene sheets that are ...

Field: Executive Management Fall 2019 Abstract: The purpose of this research is to investigate the relationship between organizational justice and job performance of employees of Ardabil gas company. Organizational justice, the role of fairness and especially the perception of fairness in the environment

Dissertation for receiving the master's degree ""MA"" Field of industrial engineering: industries – Winter Industries 2013 Abstract Today attention is paid to the issue of supply chain and its management, in Asr

Dissertation for Master's Degree (M.A.) Orientation: Industrial and Organizational The Impact of the Psychological Atmosphere Governing the Organization and Core Self-Evaluations on the Work Enthusiasm of Gar Miankoh Company's Employees Abstract This research was carried out with the aim of investigating the impact of the psychological environment governing the organization and ...

Dissertation for Master of Social Sciences (M.A) Degree: Researcher Abstract Professional values ??are the basis of employees' performance, which guide employees' interactions with citizens, colleagues, other professionals, and the general public, and provide a framework for commitment to the welfare of citizens and guidance for ethical behavior in the provision of humanitarian ...

Dissertation for Master's Degree in Public Administration, Human Resources, Abstract: In today's competitive world, organizations are looking for ways to maximize the efforts of their employees, and one of the most important of them is to motivate employees to play more important roles in the organization. Ethics means observing the principles and values ??governing the ...

Academic thesis for obtaining a master's degree in the field: business management, orientation: transformation, re-engineering and organizational architecture are comprehensive plans for the current and future description of the structure and behavior of processes, information systems, personnel and organizational units, and in fact, they seek to align them with the goals and ...

Dissertation for the Master's degree ""MsC."" Orientation: Human Resource Management Abstract The objectives of this research include identifying the relationship between ergonomic principles and stress in Shahroud Gas Company, which includes 4 sub-goals as follows 1- Identifying the relationship between occupational biomechanics and stress 2- Identifying the relationship ...

Dissertation for receiving the master's degree ""M. A"" Field: Management, Tendency: Human Resources, abstract is a general concept of servant leadership types in the management group, that this type of leadership can be the basis for classifying and evaluating the characteristics of servant leadership in the organization, which helps managers. Currently, the research and study ...

Master's thesis in electrical engineering, control trend, abstract of new methods of identifying errors in systems, such as the use of qualitative analysis of events, can lead to tangible and understandable results for everyone. The gas turbine system is one of the systems in which there is a possibility of many errors. And sometimes even modeling them with mathematical methods ...

Thesis for Master's Degree in Chemical Engineering Today, creating a safe environment in which all harmful factors are identified, evaluated, eliminated or controlled in order to guarantee the health of people and facilities is one of the priorities of industrial management. Safety science has also been reactive like the traditional approach to safety, that is, managers did not ...

Dissertation for receiving a master's degree in computer engineering (Sc. M) orientation: software. Abstract Failure in systems with sensitive applications can cause irreparable disasters. The design of this category of systems should be such that in the event of an error, they are able to perform their duties correctly, in addition to preventing the occurrence of errors as much ...

Dissertation for receiving a master's degree in the field of executive management in the field of marketing Abstract Development of technology is one of the most important features of the new era. E-government means the adoption of technologies by the government in order to increase the efficiency and productivity of public services, and identifying obstacles is one of the ...

Master's thesis in the field of public administration, human resources orientation. Abstract This research was conducted with the aim of investigating the relationship between servant leadership and organizational trust and employee empowerment in Gas Company of Mazandaran province. The statistical population in this research is 459 employees of Mazandaran gas company and the ...

Master's Thesis of Electrical Engineering - Restructuring Abstract The trustees of distribution systems, as the last link in the chain of electricity supply to subscribers, face problems in their long-term decisions. Paying attention to electricity markets and rates affected by the performance of electricity market players challenges distribution companies, which are responsible ...

Dissertation for receiving a Master's degree (M.Sc.) specialization: Environment Abstract Gaseous liquids obtained from the refining of sour gases are also sour and contain a large percentage of hydrogen sulfide and mercaptans. Therefore, after distilling and preparing the products, it needs refining processes to remove or reduce the amount of sulfur and mercaptans present. ...

Dissertation to receive the master's degree ""M.Sc. Orientation: ""Biochemical Engineering"" Abstract: The presence of sulfur compounds in gasoline creates a serious problem in air pollution, environment, corrosion of equipment and destruction of human health. The new environmental standards also impose strict limits on the amount of sulfur and aromatic compounds in gasoline. ...

Dissertation for Master's degree (M.A.) Major: Sports Management Abstract This research was conducted with the aim of investigating the role of leisure time based on physical activity in the productivity of employees of the South Pars Gas Complex Company. The method of causal research is comparative. The statistical population includes all male and female employees in 1993, ...

M.Sc. Dissertation for Master Degree in Chemical Engineering - Process Engineering Abstract Mercaptans are removed from hydrocarbon streams by various methods. The use of caustic soda solution and mucoli sieve beds are among the most widely used methods. In the oil and gas industries of our country, washing with relatively dilute caustic solution is often used to remove light ...

Abstract Gas hydrates are a group of solid host compounds that play an important role in many processes such as gas storage, transfer and separation, heterogeneous catalysis and water purification. These crystals are formed at a temperature higher than the freezing point of water and high pressure. There are different methods to calculate the free energy difference: 1) ...

Master's Thesis in Chemical Engineering (Gas Orientation) Abstract Laboratory Investigation of Gas Dehumidification Using Triethylene Glycol Solution in Hollow Fiber Membrane Contactors In this study, two hollow fiber membrane contactors with different types of Polyvinylidene Fluoride (PVDF) and Polypropylene (PP) fibers have been used for gas dehumidification by Triethylene ...

Master's thesis in the field of civil and environmental engineering. Abstract The main problem in using landfill biogas is the presence of pollutants such as hydrogen sulfide. Hydrogen sulfide gas is colorless, toxic, flammable, and has an unpleasant odor. It is highly toxic and produces SO2 when biogas is burned. In addition, hydrogen sulfide has a corrosive effect. It costs a ...

Dissertation for Master's Degree (M.Sc.) Field: Gas Processing and Transmission Engineering Abstract: Today, one of the problems in gas transmission lines is the gas hydrate phenomenon, which is a combination of light gases such as methane, ethane or carbon dioxide with water molecules under certain temperature and pressure conditions to form an ice-like substance that contains ...

Master's thesis in the field: Chemical Engineering Abstract In this research, a comprehensive two-dimensional model based on the Finite Element Method (FEM) is proposed for modeling gas-solvent membrane contactors to remove carbon dioxide[1] from synthesis gas. Aqueous solution of monoethanolamine has been used as absorbent solvent stream and CO2/N2 gas mixture as gas stream. ...

Dissertation for Master's Degree in Chemical Engineering Abstract Paying attention to the issue of safety in industrial and chemical facilities is very important. According to the statistics, the amount of human, economic and environmental damages caused by industrial accidents every year in the world is very high. In addition, some of these damages are basically irreparable. ...

Chemical engineering master's thesis without preface today simulation in processes can be an important tool to solve problems in different industries. A new idea that should be done in the real world by trial and error with a lot of costs and risks can be simulated in the environment of a strong software and the results can be used. Simulation can also be used to check and ...

Dissertation of the Ph.D course in Chemical Engineering, Biotechnology, Abstract: Clostridium Langali is a highly anaerobic estogenic bacterium that can grow on synthesis gas components, i.e. CO and H2/CO2, and convert them into ethanol and acetate at ambient temperature and pressure. During this process, the bacterium shows a complex metabolic pathway that includes both ...

A master's thesis in the field of chemical engineering, abstract of the laboratory study and modeling of calcium carbonate production from calcium chloride solution by absorbing carbon dioxide from industrial exhaust gases, by the efforts of Amin Alamdari, the effect of carbon dioxide concentration on the precipitation of calcium carbonate species and the kinetics of calcium ...

Master's Thesis of Chemical Engineering Abstract In the last few decades, due to the growth of the population as well as the improvement of living standards, the consumption of fibers and the production of textile waste materials have increased greatly. Burial and burning are one of the main ways of managing textile waste materials, which have destructive environmental effects. ...

Dissertation for obtaining the master's degree ""M.Sc."" (Chemical Engineering - Thermodynamics and Kinetics) Abstract: Keywords: Computational fluid dynamics, bubble, continuity and failure, floating bed reactors, multiphase systems, vertical vertical flows, PBM, DQMOM, recently liquid gas floating bed reactors have received attention due to their wide application in chemical, ...

Dissertation for the degree of Doctor of Dentistry Abstract: Introduction: Oral and dental problems are one of the potentially life-threatening problems in patients undergoing chemotherapy with blood dyscrasias. This study was designed to investigate a new solution to improve health in these people. Implementation method: In this single-blind clinical trial, we randomly selected ...

Dissertation: To obtain a master's degree in neonatal special care nursing Abstract Introduction: Premature babies are subjected to many painful interventions during care and treatment, and nurses should use non-pharmacological methods without risk to prevent short and long-term complications caused by pain, so this study was conducted to determine the effect of swaddling on the ...

Master's Thesis in the field of power, power electronics, power electronics, abstract. Distributed generation power plants have a production capacity of several kilowatts to 10 megawatts, which are used to produce electric energy in places close to consumers. Among their types, we can mention solar cells, fuel cells, micro turbines, wind power plants, etc. If these power plants ...

Master's thesis in the field of chemical nanoengineering Abstract: Fabrication of ceramic nanofiltration membrane for chloride ion separation (case study: gas condensate) In this research, chloride ion separation using alumina-titania double layer nanofiltration membrane has been investigated. For this purpose, first, the alumina-titania double-layer membrane is made based on ...

Dissertation for the degree of Doctor of Medicine (MD) Abstract: Introduction: Gastroesophageal reflux is one of the most common diseases of the digestive system. Epidemiological studies show that the prevalence of this disease is very high in Iran. Previous studies show a prevalence of 9-12%. There are very few studies on the factors influencing the occurrence of this disease ...

Master's thesis in the field of chemical nanoengineering, abstract modeling of chloride ion removal from gas condensate using nanofiltration of chloride ion in gas condensate can cause severe corrosion of equipment and pipes. Therefore, it is necessary to remove it from the condensate flow. The aim of this work is the mathematical modeling of the nanofiltration process for the ...

Dissertation for Master's Degree in Mechatronics Engineering Persian Abstract The purpose of this project is to introduce a new approach for troubleshooting gas transmission pipelines using mechanical waves, which is much cheaper and easier than other methods. who are currently working. These lines are usually located in difficult environmental conditions and far away and in ...

Dissertation for receiving the master's degree ""M.Sc."" Direction: Process Engineering Abstract In this research, quantitative assessment of risk caused by process accidents, such as leakage The process equipment, including flanges and valves, which may occur in the gas pressure boosting station of Ramsar city, has been investigated. This evaluation is based on the collected ...

Dissertation for M.Sc Master's degree, specialization: process engineering, abstract of the proposed project, the feasibility of converting gas condensates into products with higher added value and consumable fuels such as gasoline. Considering the huge gas and oil reserves in Iran, this country is one of the major importers of gasoline. Therefore, it is very necessary to ...

Dissertation for Master's Degree in Chemistry (M.Sc.) Major: Analytical Chemistry Abstract In the present research, the measurement of the medicinal substance isoprenaline in water was carried out using a gas chromatography device with a flame ionization detector (FID). In order to extract this compound from aqueous samples, the technique of diffusion liquid-liquid ...

Dissertation for Master's Degree in Physical Chemistry Abstract In this research, to evaluate the intermolecular potential energy level (IPS) of the F2-F2 system, the second virial coefficient of fluorine gas was calculated. The IPSs were obtained using the QCISD(T) level of theory and the cc-pVTZ-aug basis set. Calculations were performed in the temperature range of 100 to 600 ...

Master's Thesis in Electrical Engineering - Renewal Abstract The trustees of distribution systems, as the last link in the chain of electricity supply to subscribers, face problems in their long-term decisions. Paying attention to electricity markets and rates affected by the performance of electricity market players challenges distribution companies, which are responsible and ...

Master's thesis in the field of genetics. Hypotheses: Considering that miR-21 is produced by gastric cancer tumor tissue more than healthy tissue, it is expected that its serum level is significantly higher in patients compared to control subjects, and this increase is related to the staging of gastric adenocarcinoma tumors in patients. Is miR-21 serum level a reliable marker ...

Master's Thesis, Energy Conversion, Abstract: In this project, we will numerically investigate a stable gas flow in a microchannel with a rectangular cross-section. The flow with a certain temperature enters the channel with a constant temperature wall. Momentum and energy equations are discretized and solved numerically. Discretization has been done by FVM method and ...

Dissertation for Master's Degree in Mechanical Engineering-Energy Conversion Abstract The goals of this project include providing a solution for calculating the calorific value of waste based on the knowledge of the composition of waste and also proposing a combined cycle of waste incinerator power generation using the cold energy recovery of liquefied natural gas along with the ...

Master's Thesis on Automotive Powertrain Abstract In this thesis, which is presented under the title of turbocharger adaptation suitable for EF7 engine in order to improve volumetric efficiency, firstly, the history of the invention and use of turbocharger is discussed. Then, the naturally aspirated and turbocharged engine are compared, the result of which is to clarify the ...

Master's thesis in electrical engineering, control trend, abstract of new methods of identifying errors in systems, such as the use of qualitative analysis of events, can lead to tangible and understandable results for everyone. The gas turbine system is one of the systems in which there is a possibility of many errors. And sometimes even modeling them with mathematical methods ...

Master's degree in electrical engineering, control orientation, electrical engineering, control orientation, abstract. Today, chemistry and oil and gas extraction and refining is one of the most important economic and productive support points of countries. One of the most common processes in refineries is the separation of chemicals. This is done using separator towers. The ...

Dissertation for Master's Degree in Energy Systems Engineering Abstract Currently in Iran, there are many gas turbines producing electrical energy whose efficiency is around 30% to 40% depending on the environmental and functional conditions, in fact two thirds of this energy from fuel combustion is wasted through exhaust fumes and thermal waste. In order to increase the ...

Master's Thesis of Energy Conversion Mechanical Engineering Abstract In recent years, due to the importance of finding energy, global warming and environmental pollution and its production sources, and the growing need of various industries for various forms of energy, as well as the large volume of its consumers around the world, the need to provide models to optimize energy ...

Dissertation for M.Sc., Energy Systems Engineering - One of the most important issues related to the environment in the oil, gas and petrochemical industries is the proper disposal of waste hydrocarbon gases in industrial units and complexes. One of the most common methods available for the safe disposal of these gases is burning them in flares and releasing them into the ...

Master's Thesis in Mechanical Engineering (Applied Design) Abstract of Gas Turbine Rotor Stress Analysis Using Continuous Damage Mechanics In this thesis, Lometer's unified model based on continuous damage mechanics is used to model the stress-strain behavior of a gas turbine rotor sample. The unified damage law, which is used to model creep-fatigue interaction, is based on the ...

Mechanical Engineering - Applied Design Orientation Abstract: Vibration is one of the important and basic concepts in engineering sciences. In simple words, any system that has mass and spring property has the ability to vibrate and can vibrate at a natural frequency. It can be said with certainty that 95% of vibrations in industries are harmful to systems. If the system is in ...

MBA Master's Thesis Summer 2013 Abstract: The purpose of this research is to investigate the relationship between spiritual intelligence, job satisfaction and organizational commitment among the employees of the National Bank of Mazandaran Province. It is Ama community

Dissertation for Master's Degree in Civil Engineering – Shahrivar Marine Structures, September 1992 Abstract: Pipe-in-pipe systems are widely used in transmission line applications.

Dissertation for Master's Degree in Civil Engineering/ Cold Water Engineering 1392 1-1- Introduction In this chapter, an overview of the concept of climate change and its causes and the effect of this phenomenon on natural resources and

Summer 1390 Expertise Master of the field: Civil Engineering Orientation: Structure Abstract: In this thesis, the effect of nanosilica on the mechanical properties and durability of concrete containing polypropylene fibers

Dissertation of master's degree in civil-structural engineering Abstract: Divergent bracing frames are considered earthquake-resistant systems for steel structures. These braces are from my difficulty

Thesis for obtaining the degree of Master of Science (M.A. Business Orientation 2019 Winter Abstract: Social Security Organization is responsible for providing insurance coverage for workers who are not subject to special insurance laws and therefore have

Dissertation for receiving a master's degree. " M.Sc» Orientation: road and transportation winter 2013 Abstract Traffic analysis is a necessary and complex component­ Transportation systems­

Dissertation for master's degree in civil-structural field winter 2012 Abstract In recent years, the number of buildings that have suffered damage due to the loss of their gravity-bearing members has increased. Therefore, it has become important to design structures so that they are resistant to progressive damage in addition to the effects of earthquakes. One of the factors ...

Master's Thesis of Faculty of Art and Architecture, Department: Carpet (Painting), October 2013 Abstract: Today, in today's advanced and industrialized world, using new methods, it is trying to make Tul products

Abstract Considering the sensitivity of the geographical location and the potentials in the Azad Qeshm Special Zone and the idea of ??improving the level of social interactions with other regions of the country and attracting domestic and foreign investors and improving the economic relations of the organization