Download more than 100 examples of thesis, proposal and project topics about gas transmission pipe in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Dissertation for Master's Degree in Mechatronics Engineering Persian Abstract The purpose of this project is to introduce a new approach for troubleshooting gas transmission pipelines using mechanical waves, which is much cheaper and easier than other methods. who are currently working. These lines are usually located in difficult environmental conditions and far away and in ...
Dissertation for Master's Degree (M.Sc.) Field: Gas Processing and Transmission Engineering Abstract: Today, one of the problems in gas transmission lines is the gas hydrate phenomenon, which is a combination of light gases such as methane, ethane or carbon dioxide with water molecules under certain temperature and pressure conditions to form an ice-like substance that contains ...
Chemical engineering master's thesis without preface today simulation in processes can be an important tool to solve problems in different industries. A new idea that should be done in the real world by trial and error with a lot of costs and risks can be simulated in the environment of a strong software and the results can be used. Simulation can also be used to check and ...
Thesis for master's degree in the field: chemical engineering Abstract Hard polyurethane[1] is always considered one of the most effective and practical polymers in various industries, especially the coating industry. Excellent adhesive property, curing ability at ambient temperature and corrosion resistance of this polymer are some of its remarkable features. This study was ...
Dissertation for Master's Degree in Civil Engineering – Shahrivar Marine Structures, September 1992 Abstract: Pipe-in-pipe systems are widely used in transmission line applications.
Master's Thesis in Chemical Engineering (Gas Orientation) Abstract Laboratory Investigation of Gas Dehumidification Using Triethylene Glycol Solution in Hollow Fiber Membrane Contactors In this study, two hollow fiber membrane contactors with different types of Polyvinylidene Fluoride (PVDF) and Polypropylene (PP) fibers have been used for gas dehumidification by Triethylene ...
Dissertation of the doctoral course in the field of chemical engineering, biotechnology, abstract. Heavy oil transportation by pipeline is one of the most important and suitable methods of transportation, and the high viscosity of heavy oil compounds and their sedimentation in the transportation route is the most obvious problem of this type of transportation. Emulsifying heavy ...
Master's Thesis in the field of Chemical Engineering (no orientation) Abstract of the laboratory study of the wear phenomenon of liquid containing sand in pipelines. The studied fluid consists of two phases, liquid and solid. The liquid phase is water, and sand particles form the solid phase. In this research, the parameters affecting the wear rate, including: fluid speed, sand ...
Dissertation for Master's Degree in Civil Engineering Majoring in Environmental Engineering Abstract In this research, the effect of biological reactions on the removal of organic substances in wastewater during transfer from production sources to the treatment plant in conventional networks and new small diameter networks was investigated. For this purpose, a part of these ...
Dissertation for Master's Degree in Physical Education (M.A) majoring in Sports Management Abstract The aim of this research was to locate sports places in Talash city using AHP in GIS environment. The statistical sample of this research includes all the sports venues of Talash city, both public and private, including 40 sports venues. Descriptive data was collected using ...
Master's thesis in the field of chemical engineering, abstract of the design of the Driso ring base and the use of hydrocarbon solvent in the dehumidification process in Farashband refinery, water vapor is one of the most important impurities in the flow of natural gas. Usually, the water vapor itself is not a problem, but instead the liquid or solid phase that forms when the ...
Master's Thesis in Electrical Engineering, Power 1-1 Introduction Energy supply sources in the last few decades have been from fossil sources, which until recently have been obtained almost cheaply. Cheap energy sources caused that the optimal use of energy and energy recycling were practically not paid much attention. Due to the energy shortage crisis and the sense of danger ...
Field of study: Mechanics, orientation: energy conversion. The present research was conducted in order to investigate the movement of pig in pipelines. Due to the importance of pipelines in providing energy resources in the world, after installation and operation, the maintenance of these lines is of high importance, which has caused special attention to be paid to the design of ...
Dissertation for Master's Degree in Electrical-Electronic Engineering (M.Sc) Abstract Sulfur recovery process by Klaus method is one of the most common methods of separating elemental sulfur from acid gas resulting from the sweetening process in gas and oil refineries. But due to the complexity of this process and the multivariable nature of the reaction furnace and the lack of ...
Master's thesis in the field of mechanics, specialization: mechanical engineering - energy conversion. Abstract: One of the most important components of fluid transmission systems are control valves, which can be seen in different routes of oil and gas transmission pipelines, etc. In control valves, the most important issue is the property of the flow in order to achieve the ...
A master's thesis in the field of chemical engineering. Abstract of the laboratory study of the wear phenomenon of gas containing sand and liquid droplets in pipelines. For this purpose, a pipeline test device including: vertical and horizontal pipelines and various connections has been made. The studied fluid consists of three phases: gas, liquid and solid. The gas phase is ...
The master's thesis of precision instruments and automation in the oil industry. The introduction of the entire research is one of the important scientific, technical and economic topics, the issue of corrosion of metals and the protection of metal facilities. Investigating the topic of corrosion is not so simple and with all the research done, its factors are still not known ...
Mechanical Engineering - Applied Design Orientation Abstract: Vibration is one of the important and basic concepts in engineering sciences. In simple words, any system that has mass and spring property has the ability to vibrate and can vibrate at a natural frequency. It can be said with certainty that 95% of vibrations in industries are harmful to systems. If the system is in ...
Master's Thesis of Electrical Engineering - Power Abstract The discussion of repairs in any system, including the power system, is of special importance. In the traditional structure of the electricity industry, repairs related to the generation and transmission sectors are both carried out by the network operator. With the restructuring of the electricity industry, the repair ...
Dissertation for master's degree in electrical engineering, power trend. Abstract Overvoltages are one of the most important factors that destroy and threaten the insulation of power network equipment and often cause interruptions in service and reduce the quality of power and reliability of the system. In addition, transient overvoltages caused by lightning are more common and ...
Master's Thesis of Electrical Engineering - Restructuring Abstract The trustees of distribution systems, as the last link in the chain of electricity supply to subscribers, face problems in their long-term decisions. Paying attention to electricity markets and rates affected by the performance of electricity market players challenges distribution companies, which are responsible ...
M.Sc. Dissertation for Master Degree in Chemical Engineering - Process Engineering Abstract Mercaptans are removed from hydrocarbon streams by various methods. The use of caustic soda solution and mucoli sieve beds are among the most widely used methods. In the oil and gas industries of our country, washing with relatively dilute caustic solution is often used to remove light ...
Abstract Gas hydrates are a group of solid host compounds that play an important role in many processes such as gas storage, transfer and separation, heterogeneous catalysis and water purification. These crystals are formed at a temperature higher than the freezing point of water and high pressure. There are different methods to calculate the free energy difference: 1) ...
Dissertation for Master's Degree (M.S) in Power Electricity, Abstract With the ever-increasing expansion of energy consumption in the world, the development of power networks is essential. But the creation of new transmission lines requires time and high costs, so if it is possible to use the same lines with a higher transmission capacity, it is very cost-effective. Today, the ...
A master's thesis in the field of chemical engineering, abstract of the laboratory study and modeling of calcium carbonate production from calcium chloride solution by absorbing carbon dioxide from industrial exhaust gases, by the efforts of Amin Alamdari, the effect of carbon dioxide concentration on the precipitation of calcium carbonate species and the kinetics of calcium ...
Dissertation for receiving a master's degree in electrical engineering, electronics orientation. Chaos theory was founded at the end of the 20th century by Lorentz. Chaos science investigates non-linear systems and their behavior in different conditions. Since the systems around us are mostly non-linear, by creating feedback in them, they may show chaotic behavior, so chaos ...
Master's Thesis in the field of power, power electronics, power electronics, abstract. Distributed generation power plants have a production capacity of several kilowatts to 10 megawatts, which are used to produce electric energy in places close to consumers. Among their types, we can mention solar cells, fuel cells, micro turbines, wind power plants, etc. If these power plants ...
Master's thesis in the field of chemical nanoengineering, abstract modeling of chloride ion removal from gas condensate using nanofiltration of chloride ion in gas condensate can cause severe corrosion of equipment and pipes. Therefore, it is necessary to remove it from the condensate flow. The aim of this work is the mathematical modeling of the nanofiltration process for the ...
Master's Thesis in Electrical Engineering - Renewal Abstract The trustees of distribution systems, as the last link in the chain of electricity supply to subscribers, face problems in their long-term decisions. Paying attention to electricity markets and rates affected by the performance of electricity market players challenges distribution companies, which are responsible and ...
Master's Thesis, Energy Conversion, Abstract: In this project, we will numerically investigate a stable gas flow in a microchannel with a rectangular cross-section. The flow with a certain temperature enters the channel with a constant temperature wall. Momentum and energy equations are discretized and solved numerically. Discretization has been done by FVM method and ...
Dissertation for M.Sc., Energy Systems Engineering - One of the most important issues related to the environment in the oil, gas and petrochemical industries is the proper disposal of waste hydrocarbon gases in industrial units and complexes. One of the most common methods available for the safe disposal of these gases is burning them in flares and releasing them into the ...
To get a master's degree in mechanical engineering Abstract: Today, the use of aluminum and magnesium alloys in the automotive and aerospace industries is increasing due to the high strength of these alloys and their light weight. Since the forming ability of these alloys is low at ambient temperature, forming these alloys at high temperatures improves their formability. ...
Dissertation for Master's Degree in Civil Engineering/ Cold Water Engineering 1392 1-1- Introduction In this chapter, an overview of the concept of climate change and its causes and the effect of this phenomenon on natural resources and
Summer 1390 Expertise Master of the field: Civil Engineering Orientation: Structure Abstract: In this thesis, the effect of nanosilica on the mechanical properties and durability of concrete containing polypropylene fibers
Dissertation to receive a master's degree thesis, abstract of the thesis (including summary, objectives, implementation methods, and results obtained) Today, positive behaviors beyond the role, under the title of ""Organizational Citizenship Behavior (OCB)"" have been considered, in research, several variables such as job satisfaction, organizational justice, organizational ...
Dissertation to receive a master's degree (M.A) in natural geography, specialization: climatology in environmental planning, abstract: natural disasters have been the most important cause of human concern at all times. Landslides are one of the most important natural disasters that cause financial and human losses every year, which creates problems in the implementation of ...
Dissertation for Master's Degree in Political Geography Abstract: Iran's foreign policy in the last three centuries was based on the country's western borders, but in practice, this country has suffered significant injuries from its eastern borders, especially after the division of the subcontinent into three independent countries in 1947 and the occurrence of border disputes ...
Dissertation for Master's Degree in Electrical Engineering, Power Systems, Abstract: During the last two decades, the electricity industry has undergone fundamental changes in the way it is produced, transmitted and distributed, which is referred to as restructuring. With the restructuring in the electricity industry, reactive power has been introduced as one of the most ...
To receive a master's degree in textile technology engineering. Abstract In the previous research, multi-sized nano-roughness was developed using nanoparticles with different sizes and different surface charges along with silicone resin coating to produce multi-purpose textiles with stable properties. In this research, the idea of ??using laser irradiation and finishing textiles ...
The master's thesis in the field of power. Abstract Control of scattered productions and their planning is one of the important issues of power systems operation. The purpose of this issue is to minimize the cost of operation and pollution and to supply cargo by observing the operation restrictions. The increase in the desire to use renewable resources and the move towards the ...
Dissertation for master's degree in the field: Power Electrical Engineering Abstract Due to the extent and complexity of distribution networks, the probability of an accident occurring in them is very high, and the occurrence of an accident can affect many subscribers. Therefore, reliability is one of the key parameters determining the success rate of the system in providing ...
Master's thesis in the field of power electronics, power electronics, Abstract: The use of pulsed power sources in various plasma processes is increasing due to the relationship established between them. According to the research done in this case, the design of pulsed power sources with the aim of reducing losses and increasing efficiency can have important effects on plasma ...
Dissertation for M.Sc. Abstract A wireless sensor network is a network consisting of many small nodes. The node receives information about the environment through sensors. The energy consumption of the nodes is usually provided by batteries, which in most cases cannot be replaced. Therefore, the consumption power of nodes is an important issue in these networks. And it is very ...
Master's Thesis in Electrical Engineering (Communication System) Abstract: Optimizing Node Placement in Different Environments for Broadband Sensor Networks Locator Systems are systems that can detect the location of an object in a space. Such systems usually detect the distance between two objects by using radio communication and determine the location of the object in the area ...
Abstract The main task of the synchronous generator excitation system is to provide the necessary voltage for the generator excitation winding. The excitation voltage is a dc voltage and it is used to create a flux in the excitation winding of the generator and consequently to produce a magnetic field to produce electrical energy by a synchronous generator. In the provided ...
Dissertation to receive a master's degree, specialization: civil engineering-water engineering Abstract: In this research, the effect of land slope, difference in height of pressure booster stations, height above sea level on the characteristics of the length of the water transmission systems in order to verify the feasibility and facilitate the prediction of its use and optimal ...
Master's thesis in the field of civil engineering, structural orientation. Abstract In this study, the evaluation and comparison of nonlinear and numerical analysis of deep reinforced concrete beams with openings without reinforcement with deep concrete beams with openings reinforced with FRP sheets and deep reinforced concrete beams without openings by Abaqus finite element ...
Dissertation for Master's Degree in Civil Engineering, Marine Structures, Abstract: Tension-based platforms are among economic marine platforms for use in deep waters. The correct prediction of the platform's dynamic response to environmental loads is very important in its economic and safe design. In this research, the dynamic behavior of the tension base platform under the ...
A master's thesis in the field of electrical engineering - field telecommunications, abstract, investigation and analysis of leaf reflective structures in the field of plasmonics for the application of passive components in the design of optical integrated circuits, limits the diffraction limit of the miniaturization of optical elements. Surface plasmon polaritons that propagate ...
Master's Thesis (Civil Engineering - Water and Wastewater Engineering) Abstract: In this study, ram impact pump modeling was done by the software that was prepared. This software finds the outputs of the HAMMER software as input and by obtaining other information (including the pumping height, etc.) it calculates the amount of pumped water every time the valve is suddenly turned ...
Dissertation for the Master's degree ""MA"" in Persian language and literature Abstract Culture and customs have always been with the people since long ago and have their roots in the history of the people of every country. Over time, social and psychological factors affect the way these customs are held. With a deep look at the past and the special culture and customs that the ...
Master's Thesis Field: MBA Abstract About two-thirds of the world's energy is consumed in cities. Along with the many solutions that have been provided to reduce the energy demand, some technologies and researches have also been aimed at optimizing the energy supply. The technology of simultaneous production of electricity and heat is among the technologies that have been ...
Abstract The reduction of fossil fuel resources, adverse environmental effects and low efficiency of traditional power grids have increased the desire to produce electricity near the load and the level of the distribution network using renewable sources. One of the basic solutions to solve the problems raised is the use of microgrids. A set of small sources of energy production ...
Education Level: Master's Degree, Field: Civil Engineering, Major: Structures Abstract: In this thesis, the effect of nanosilica on the mechanical properties and durability of concrete containing polypropylene fibers was investigated. Polypropylene fibers with a length of 18 mm and a ratio of length to diameter of 0.9 mµ were used. The effect of fibers and nanosilica in three ...
Dissertation for Master of Electrical Engineering (M.A.) Direction: Power Abstract Reliability assessment in power networks is essential. With the discussion of smart grids in traditional power systems, a lot of attention has been paid to the use of renewable resources, electric cars that can be connected to the grid, and also other types of energy sources such as CHPs[1]. On ...
Dissertation for obtaining the master's degree ""M.Sc."" Abstract Mechatronic Engineering Considering the reduction of potable water resources and also the increasing population of cities, the increase in the number of subscribers, the need to increase the speed and accuracy in meter reading and reduce excess costs, in order to achieve modern technologies, extensive research has ...
Master's thesis in the field of civil engineering, soil mechanics, and abstract excavation projects in urban areas are always at risk. Therefore, a suitable safety margin should be considered in the design of the guard structure. Traditional slope stability assessment methods, which are usually based on empirical judgments such as the concept of confidence factor and limit ...
Introduction In today's era, the presence of waste materials resulting from various physical and chemical processes is one of the important problems of industrialized and developing countries. So that extensive research is being carried out for methods of recycling or disposing of them to minimize the damage to the environment. In this regard, construction researchers, like ...
Presented to graduate education management as part of the academic activities required to obtain a master's degree in the field of mechatronics. Abstract As you know, air conditioner is a high consumption device and has a Freon refrigeration cycle. What drew the companies to the production of inverters was to solve the shortcoming of air conditioners in high energy consumption. ...
Dissertation for Master's Degree in Power Electrical Engineering Abstract In this thesis, a hybrid power generation system using fuel cell/battery/supercapacitor to power a light electric vehicle with independent excitation electric motor drive system was studied and simulated. The electric vehicle system consists of a feed and control system, multiple sources, power control ...
Master's Thesis Abstract: Short-term load forecasting, in the form of one-hour to several days load forecasting, has a significant impact on the operation of power systems. Because many energy management measures, such as setting up a cost-effective plan to use existing power plants, planning the purchase of fuel needed by power plants, entering and exiting units, developing ...
Master's Thesis Electricity- Pollution power of big cities has become an acute issue for years. Expert research shows that the main cause of pollution in cities are cars with internal combustion engines. Combustion vehicles have many disadvantages, among which we can mention things such as dependence on a specific type of energy (oil), production of greenhouse gases, production ...
Master's Thesis of Chemical Engineering Abstract In this research, the optimal absorption conditions for cationic dyes have been investigated and the removal of brilliant green dye [1] by the natural adsorbent of khakshir has been investigated. First, the effective conditions in the amount of brilliant green removal by the khakshir stem adsorbent were researched, then using the ...
Master's thesis in the field of chemical engineering, abstract of the laboratory study of iron oxide production on a microstructural scale using the precipitation method with supercritical anti-solvent by: One of the problems of cement used in oil wells, which are used to connect wall pipes and well walls, is that these cements do not have the desired resistance against high ...
Dissertation to receive a general doctorate degree Abstract Introduction and purpose: Since 1980, new groups of antibiotics called oxyimmunocephalosporins, which were resistant to the hydrolytic activity of beta-lactamases, were used to treat gram-negative bacterial infections. In the early 1990s, extended-spectrum beta-lactamases (ESBLs) produced by gram-negative bacteria ...
Dissertation to receive master's degree in organic chemistry Keywords: Farsi: Besparash, condensation, composite, nanocomposite, anchoring Nitrogen in bonding with metals can destroy them
Master's Thesis in the field of industrial management - production trend Abstract Among the topics that have long been faced by the decision makers and policy makers of the electricity industry in many countries of the world, the thinking of restructuring this industry is in accordance with the process of increasing efficiency and competition in other industries. Iran's ...
Master's Thesis Field: Electric Power Abstract: In this thesis, a new framework is presented for the planning and development of the participation strategy of virtual power plants in the energy and storage markets. According to the definition, a virtual power plant is a set of small-scale production units with a covered load and network managed by a certain entity. Dispersed ...
Master's thesis in the field of chemical engineering without major. Abstract: Modeling, simulation and optimization of Jam Petrochemical Check Bed Reactor for hydrogenation of 1 and 3-butadiene. Therefore, a suitable kinetic model has been selected as a basic structure for modeling the reactor, and after that the presented model has been developed in order to match the molar ...
Dissertation for Master's Degree in Chemical Engineering Abstract According to reports, heterogeneous photocatalysts are suitable for photodegradation of polluting compounds. Many semiconducting metal oxides such as: TiO2, SnO2, ZnO2, etc. can be used as photocatalysts in water splitting reactions, synthesis of organic compounds and removal of wastewater pollution. synthesized ...
Master's Thesis Abstract In this project, the coat cracker unit of Abadan refinery has been simulated using Hysys refinery software. In simulating and receiving information, feed properties and solving mass and energy balance equations have been used. Simulation data and operational data of Abadan Cat Cracker unit have been compared. Also, by changing some important operational ...
Abstract Photovoltaic or PV for short is one of the types of electricity generation systems from solar energy. In this method, by using solar cells, direct production of electricity from sunlight becomes possible. Solar cells are semi-conductors that are made of silicon, the second most abundant element in the earth's crust. When sunlight shines on a photovoltaic cell, a ...
Abstract A wireless sensor network is a network consisting of many small nodes. The node receives information about the environment through sensors. The energy consumption of the nodes is usually provided by batteries, which in most cases cannot be replaced. Therefore, the consumption power of nodes is an important issue in these networks. And it is very necessary to use ...