Download more than 100 examples of thesis, proposal and project topics about gas liquid separator in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Dissertation for receiving a Master's degree (M.Sc.) specialization: Environment Abstract Gaseous liquids obtained from the refining of sour gases are also sour and contain a large percentage of hydrogen sulfide and mercaptans. Therefore, after distilling and preparing the products, it needs refining processes to remove or reduce the amount of sulfur and mercaptans present. ...
Master's thesis in the field of chemical nanoengineering Abstract: Fabrication of ceramic nanofiltration membrane for chloride ion separation (case study: gas condensate) In this research, chloride ion separation using alumina-titania double layer nanofiltration membrane has been investigated. For this purpose, first, the alumina-titania double-layer membrane is made based on ...
Dissertation for M.Sc Master's degree, specialization: process engineering, abstract of the proposed project, the feasibility of converting gas condensates into products with higher added value and consumable fuels such as gasoline. Considering the huge gas and oil reserves in Iran, this country is one of the major importers of gasoline. Therefore, it is very necessary to ...
Master's Thesis of Energy Conversion Mechanical Engineering Abstract In recent years, due to the importance of finding energy, global warming and environmental pollution and its production sources, and the growing need of various industries for various forms of energy, as well as the large volume of its consumers around the world, the need to provide models to optimize energy ...
Dissertation for Master's Degree (M.Sc.) Orientation: Environment Abstract Based on the studies conducted, there are various processes for desulfurization of naphtha, which determine the method of desulfurization of naphtha, there are very determining parameters, and the type of sulfur compounds and operating temperature and pressure are one of the most important parameters that ...
Master's Thesis, Energy Conversion Engineering, Abstract: In many processes in the industry, the combination of liquid droplets with gas flow will lead to problems such as corrosion of downstream equipment and loss of expensive liquids. To solve these problems, the phases are separated from each other with the help of a separator. Cyclone separators, as a type of high efficiency ...
A master's thesis in the field of chemical engineering. Abstract of the laboratory study of the wear phenomenon of gas containing sand and liquid droplets in pipelines. For this purpose, a pipeline test device including: vertical and horizontal pipelines and various connections has been made. The studied fluid consists of three phases: gas, liquid and solid. The gas phase is ...
Dissertation for obtaining the master's degree ""M.Sc."" (Chemical Engineering - Thermodynamics and Kinetics) Abstract: Keywords: Computational fluid dynamics, bubble, continuity and failure, floating bed reactors, multiphase systems, vertical vertical flows, PBM, DQMOM, recently liquid gas floating bed reactors have received attention due to their wide application in chemical, ...
Dissertation for Master's Degree in Chemistry (M.Sc.) Major: Analytical Chemistry Abstract In the present research, the measurement of the medicinal substance isoprenaline in water was carried out using a gas chromatography device with a flame ionization detector (FID). In order to extract this compound from aqueous samples, the technique of diffusion liquid-liquid ...
Master's degree in electrical engineering, control orientation, electrical engineering, control orientation, abstract. Today, chemistry and oil and gas extraction and refining is one of the most important economic and productive support points of countries. One of the most common processes in refineries is the separation of chemicals. This is done using separator towers. The ...
Dissertation for receiving a master's degree, Major: Accounting, Abstract: Considering the importance of the liquidity of companies' shares in the capital market, the present research seeks to investigate the factors affecting liquidity. In this regard, the impact of dividend policies on the liquidity of companies' shares has been tested. In this research, multiple linear ...
Dissertation to receive the master's degree ""M.Sc. Orientation: ""Biochemical Engineering"" Abstract: The presence of sulfur compounds in gasoline creates a serious problem in air pollution, environment, corrosion of equipment and destruction of human health. The new environmental standards also impose strict limits on the amount of sulfur and aromatic compounds in gasoline. ...
M.Sc. Dissertation for Master Degree in Chemical Engineering - Process Engineering Abstract Mercaptans are removed from hydrocarbon streams by various methods. The use of caustic soda solution and mucoli sieve beds are among the most widely used methods. In the oil and gas industries of our country, washing with relatively dilute caustic solution is often used to remove light ...
Master's Thesis in Chemical Engineering (Gas Orientation) Abstract Laboratory Investigation of Gas Dehumidification Using Triethylene Glycol Solution in Hollow Fiber Membrane Contactors In this study, two hollow fiber membrane contactors with different types of Polyvinylidene Fluoride (PVDF) and Polypropylene (PP) fibers have been used for gas dehumidification by Triethylene ...
Master's thesis in the field: Chemical Engineering Abstract In this research, a comprehensive two-dimensional model based on the Finite Element Method (FEM) is proposed for modeling gas-solvent membrane contactors to remove carbon dioxide[1] from synthesis gas. Aqueous solution of monoethanolamine has been used as absorbent solvent stream and CO2/N2 gas mixture as gas stream. ...
Dissertation of the Ph.D course in Chemical Engineering, Biotechnology, Abstract: Clostridium Langali is a highly anaerobic estogenic bacterium that can grow on synthesis gas components, i.e. CO and H2/CO2, and convert them into ethanol and acetate at ambient temperature and pressure. During this process, the bacterium shows a complex metabolic pathway that includes both ...
A master's thesis in the field of chemical engineering, abstract of the laboratory study and modeling of calcium carbonate production from calcium chloride solution by absorbing carbon dioxide from industrial exhaust gases, by the efforts of Amin Alamdari, the effect of carbon dioxide concentration on the precipitation of calcium carbonate species and the kinetics of calcium ...
The master's thesis of precision instruments and automation in the oil industry. The introduction of the entire research is one of the important scientific, technical and economic topics, the issue of corrosion of metals and the protection of metal facilities. Investigating the topic of corrosion is not so simple and with all the research done, its factors are still not known ...
Dissertation for Master's Degree in Energy Systems Engineering Abstract Currently in Iran, there are many gas turbines producing electrical energy whose efficiency is around 30% to 40% depending on the environmental and functional conditions, in fact two thirds of this energy from fuel combustion is wasted through exhaust fumes and thermal waste. In order to increase the ...
Master's Thesis of Precision Instrumentation and Automation in the Oil Industry. Abstract: Corrosion rate prediction and wear rate constant in gas brain tube using neural network is a phenomenon that is very complex due to the influence of various factors and cannot be modeled easily. In order to predict and model corrosion, attention is paid to its physical, chemical and ...
Dissertation for M.Sc., Energy Systems Engineering - One of the most important issues related to the environment in the oil, gas and petrochemical industries is the proper disposal of waste hydrocarbon gases in industrial units and complexes. One of the most common methods available for the safe disposal of these gases is burning them in flares and releasing them into the ...
Dissertation for Master's Degree in Civil Engineering – Shahrivar Marine Structures, September 1992 Abstract: Pipe-in-pipe systems are widely used in transmission line applications.
Dissertation for Master's Degree in Civil Engineering/ Cold Water Engineering 1392 1-1- Introduction In this chapter, an overview of the concept of climate change and its causes and the effect of this phenomenon on natural resources and
Master's Thesis of Faculty of Art and Architecture, Department: Carpet (Painting), October 2013 Abstract: Today, in today's advanced and industrialized world, using new methods, it is trying to make Tul products
Master's Thesis in Public Administration - Financial Management, Abstract: In the past years, the trend of electric energy consumption has been increasing due to national growth and development, until the amount of fossil fuels consumed, natural gas and petroleum products, was equal to 385.5 barrels of crude oil in 2013. Of this amount, 306.1 barrels of crude oil have been ...
Dissertation for M.A. specialization: Insurance Management Abstract The most important factor in achieving the goals of any organization is human resources, and the success and progress of any organization depends on its human resources. Several factors affect the efficiency of people in the organization. According to the theoretical foundations, one of the factors that can ...
Dissertation for obtaining a master's degree in electrical engineering, electronics, abstract, accurate measurement and control of temperature in industrial and research systems is of particular importance, and the correct operation of some industrial and laboratory tools is possible only in a certain location with a small number of channels (maximum 8 channels). Therefore, the ...
Master's thesis in chemical engineering field, vapor pressure is an important thermodynamic property in process equipment design and chemical engineering unit operation. Therefore, experimental vapor pressure data that cover the entire range of vapor pressure are very valuable, but due to the lack of accurate measurements for the vapor pressure of some materials near the triple ...
To receive a master's degree in textile technology engineering. Abstract In the previous research, multi-sized nano-roughness was developed using nanoparticles with different sizes and different surface charges along with silicone resin coating to produce multi-purpose textiles with stable properties. In this research, the idea of ??using laser irradiation and finishing textiles ...
Master of Business Administration Abstract The future of the world in the 21st century is full of competition, the development of emerging markets, uncertain environmental factors, the spread of superior technologies and the expansion of business. The condition for success in this field is to take advantage of the strengths and opportunities and face the weaknesses and ...
Master's thesis in the field of civil engineering (environmental engineering) is an abstract of the surface absorption method, one of the effective methods for removing metals, including nickel metal. In this research, modified rice paddy has been used as absorbent material. Since this adsorbent is a natural material with a high contact surface, in addition to its high ability ...
Dissertation for Master's Degree in Civil Engineering - Earthquake Engineering Abstract The city of Birjand, as the capital of South Khorasan province, is located in the structural zone of Sistan, which is particularly sensitive due to its proximity to seismic and fundamental faults (Neh Khawri and Westi faults in the south, Ardkol fault in the northeast, Nawaz fault in the ...
Dissertation for Master's Degree in Civil Engineering with Earthquake Orientation Abstract: Semi-rigid joints [1] are joints whose hardness is between the two states of grip and joint and transmit a part of the anchor, in other words, its degree of rigidity is between 20% and 90%. In this thesis
Dissertation for obtaining a master's degree in chemistry, fluoride has been known as a toxic ion for many years. The main source of fluoride in aqueous solutions is minerals containing fluoride and the industrial activities of factories. According to the report of the Environmental Protection Organization, the amount of fluoride more than 1 mg/liter causes various diseases. In ...
Master's thesis in the field of chemical engineering (gas engineering trend) in recent years, many horizontal wells have been drilled around the world. The main reason is the ability to increase the level of the tank in contact with the well, which increases the utilization of the well. Well testing is used to identify the models of hydrocarbon reservoirs and to identify their ...
Master's thesis in the field of chemical engineering, abstract of the design of the Driso ring base and the use of hydrocarbon solvent in the dehumidification process in Farashband refinery, water vapor is one of the most important impurities in the flow of natural gas. Usually, the water vapor itself is not a problem, but instead the liquid or solid phase that forms when the ...
Master's Thesis (M.Sc.) Direction: Process Design Abstract Currently, membranes have found a special place in different separation industries and have wide applications in different fields of separation, including liquid solutions and different gases. Membrane technology is one of the most widely used technologies in today's industry, whose field of application is wide ranging ...
Thesis for obtaining a master's degree. Abstract: The increase in environmental concerns and the progress of green chemistry processes have necessitated the replacement of homogeneous catalysts with heterogeneous ones. In this research, activated carbon was used as a suitable substrate due to its special properties. The most important of these properties are resistance in acidic ...
Presented to graduate education management as part of the academic activities required to obtain a master's degree in the field of mechatronics. Abstract As you know, air conditioner is a high consumption device and has a Freon refrigeration cycle. What drew the companies to the production of inverters was to solve the shortcoming of air conditioners in high energy consumption. ...
Dissertation to receive the Ph.D. degree in Pharmacy. Persian summary. Quick-release oral tablets are solid pharmaceutical forms that have received special attention in the last three decades and are considered as an alternative to regular tablets and capsules. In contact with oral saliva, these tablets quickly disintegrate and turn into soluble fine granules in less than 1 ...
Master's Thesis of Chemical Engineering Abstract In this research, the optimal absorption conditions for cationic dyes have been investigated and the removal of brilliant green dye [1] by the natural adsorbent of khakshir has been investigated. First, the effective conditions in the amount of brilliant green removal by the khakshir stem adsorbent were researched, then using the ...
Master's thesis in the field of chemical engineering, abstract of the laboratory study of iron oxide production on a microstructural scale using the precipitation method with supercritical anti-solvent by: One of the problems of cement used in oil wells, which are used to connect wall pipes and well walls, is that these cements do not have the desired resistance against high ...
Master's thesis in the field of chemical nanoengineering Abstract The synthesis of silicon dioxide nanoparticles from silicon oil waste using the synthesis method of silicon dioxide nanoparticles [1] has many industrial applications. The industrial use of these particles in traditional fields as well as new fields is expanding, for which new applications are continuously found. ...
Dissertation for Ph.D. degree in Pharmacy, Persian Summary Orally-opening tablets are solid pharmaceutical forms that open in the oral cavity in less than 1 minute without leaving any residue. The purpose of this research is to prepare and evaluate fast-opening oral tablets of amlodipine mg5, which is a long-acting blocker of calcium channels used in the treatment of chronic ...
Master's Thesis in Chemical Engineering Abstract of Electrochemical Analysis of Formaldehyde Formaldehyde is one of the organic chemicals that is widely used as a raw material in many industries. Industrial effluents that contain high concentrations of formaldehyde must be treated before entering the environment due to its possible carcinogenic and mutagenic risks. The purpose ...
Master's Thesis in Chemical Engineering Abstract Vapor pressure is an important thermodynamic property in process equipment design and chemical engineering unit operation. Therefore, experimental vapor pressure data that cover the entire range of vapor pressure are very valuable, but due to the lack of accurate measurements for the vapor pressure of some materials near the ...
Dissertation for Master's Degree in Organic Chemistry. Summary of the research done in this thesis consists of two parts, the first part is the synthesis of the precursor of 4,5-dihydropyrrolo[1,2,3-hi]indole-1,2-dione (compound 1) and one-pot, three-component synthesis of new derivatives of spiro terecates in water-green solvent and in the presence of HMTA catalyst. The second ...
Doctoral Dissertation in Chemical Engineering Abstract With the increase in population, the need for energy resources for mankind has also increased. Diesel, as an effective fuel, fulfills the need for transportation fuel in the world. Biodiesel, which is considered a renewable fuel and produces less harmful environmental effects, is produced from various sources, among which ...
A master's thesis in the field of chemical engineering, abstract of biodiesel production from microalgae by supercritical carbon dioxide extraction method. In this research, different stages of biodiesel production from Chlorella vulgaris microalgae, especially the stage of oil extraction from it, were experimentally studied. The method of microalgae cultivation was selected ...
Master's Thesis in Chemical Engineering Abstract Simulation of dynamic surface tension phenomenon in solvent oil systems based on permeation process is one of the prominent processes in the field of increasing extraction from oil reservoirs, gas injection. Therefore, a correct understanding of the mechanisms and how these processes are carried out is a big step towards ...
Dissertation for obtaining a master's degree in the field of chemical nanoengineering Abstract In the uranium enrichment unit by centrifuge, UF6 gas after passing through the centrifuge and performing the enrichment process, enters the cold trap and is solidified and collected at a low temperature. One of the absorbents used to absorb uranium hexafluoride is sodium fluoride. The ...
Dissertation for Master's Degree in Chemical Engineering Abstract Critical characteristics for materials such as critical temperature, critical volume and critical pressure are important characteristics for predicting many thermodynamic properties of different materials. Knowing the critical properties plays an essential role in all hydrocarbon production and process operations. ...
Dissertation for receiving a professional doctorate degree in the field of medicine Persian abstract Title: Comparison of the prevalence of obsessive-compulsive disorder in children with and without functional constipation referred to the pediatric clinic of Amirkabir Hospital in 2013 Introduction: Constipation in childhood is a common problem that causes discomfort to the child ...
Dissertation for M.A. degree. ""Trend of Biotechnology"" Abstract Today, due to the reduction of fossil fuel sources and the destructive effects of these types of fuels on the environment, researchers are thinking of replacing them. In recent years, biodiesel fuel is considered the most suitable alternative to diesel fuel due to its renewable nature and less pollution. The ...
Master's thesis in the field of chemical engineering without major. Abstract: Modeling, simulation and optimization of Jam Petrochemical Check Bed Reactor for hydrogenation of 1 and 3-butadiene. Therefore, a suitable kinetic model has been selected as a basic structure for modeling the reactor, and after that the presented model has been developed in order to match the molar ...
Dissertation for M.Sc. Degree: Food Industry Abstract: Pectinases are a group of hydrolytic enzymes that break down pectic substances. Exopolygalacturonase (exo-p) and endopolygalacturonase (endo-p) are two types of this group. In this study, two fungal species, namely Aspergillus niger and Vetrichodermarisi, which were able to produce pectinase, were isolated. The results of ...
Master's Thesis in the field of Chemical Engineering (no orientation) Abstract of the laboratory study of the wear phenomenon of liquid containing sand in pipelines. The studied fluid consists of two phases, liquid and solid. The liquid phase is water, and sand particles form the solid phase. In this research, the parameters affecting the wear rate, including: fluid speed, sand ...
Master's Thesis in Food Safety and Health Abstract: Background: Essential oils and extracts obtained from medicinal plants with antimicrobial, anticancer and antioxidant compounds are of particular importance as new and natural medicinal compounds, both in the field of health and treatment of diseases and protection of raw and processed foods. Objective: To determine the ...
Master's Thesis in Chemical Engineering Abstract: The purpose of this thesis is mathematical modeling of rotary dryer for drying dicalcium phosphate. In this project, with different temperature conditions and different number of cycles of the dryer, the moisture level of the product exiting the dryer has been checked. As a result, 100 data have been obtained from the output of ...
Master of Mechatronics Abstract As you know, the air conditioner is a high consumption device and has a Freon refrigeration cycle. What drew the companies to the production of inverters was to solve the shortcoming of air conditioners in high energy consumption. To improve energy consumption in every part of the industry, one should pay attention to several parameters, it is ...
Dissertation for Master's Degree in Advanced Chemical Engineering Abstract A new method based on point cloud extraction to extract uranium from water samples and its measurement using alpha spectrometry based on liquid scintillation has been investigated. Uranium extraction from water samples in the presence of a number of available surfactants and chelating reagents has been ...
Dissertation for receiving the master's degree ""M.Sc."" Chemical engineering trend, thermodynamic and synthetic engineering Abstract In this study, the modeling of dilute acid hydrolysis of walnut green skin as a sample of lignocellulosic material to produce fermentable sugar in the bioethanol process has been studied. The four parameters of temperature, time, acid ...
Dissertation to receive a master's degree (((M.sc) specialization: medical nanotechnology) Abstract In the present research, the cation exchange property of clinoptilolite is used due to its negative charge in its structure. The connection of this research topic with medical nanotechnology is due to the nanopores and porosity of clinoptilolite and the high absorption level of ...
Master's Thesis in Polymerization Engineering Abstract In this research, the thermal and catalytic pyrolysis of four types of polymers such as heavy polyethylene and polypropylene and two styrene butadiene rubber and polybutadiene rubber in a semi-continuous stirred reactor under nitrogen gas and using HZSM-5, FCC and H-Mordenite catalysts has been investigated. In this study, ...
Persian summary of the cheese plant with the scientific name of Malva Ngalkata is native to Central Asian countries. In Iran, paneerak grows in different regions, including Kurdistan, Azerbaijan, Alborz, Tehran and Khorasan provinces. In traditional medicine, cheese plant has many therapeutic benefits and uses, such as reducing muscle and nerve pains, healing wounds, relieving ...
Master's thesis in the field of mechanical engineering - energy conversion trend Abstract: In this research, the turbulent flow of a non-Newtonian nanofluid in a microchannel with a circular cross-section is simulated. First, the types of classification of microchannels, the methods of making microchannels, as well as the advantages and challenges of using microchannels are ...
Master's thesis in the field of electrical-electronic engineering Abstract of the construction of a humidity sensor using carbon nanotubes Today, humidity sensors have many applications in various fields, including environmental control processes, household applications, automotive industry, medicine, agriculture and chemical industries. Until now, various structures have been ...
Abstract Photovoltaic or PV for short is one of the types of electricity generation systems from solar energy. In this method, by using solar cells, direct production of electricity from sunlight becomes possible. Solar cells are semi-conductors that are made of silicon, the second most abundant element in the earth's crust. When sunlight shines on a photovoltaic cell, a ...
Dissertation for M.Sc Mechanical Engineering - Energy Conversion Orientation Abstract: In this research, the turbulent flow of a non-Newtonian nanofluid in a microchannel with a circular cross-section is simulated. First, the types of classification of microchannels, the methods of making microchannels, as well as the advantages and challenges of using microchannels are stated. ...
Master's degree in electrical engineering, electronics, abstract, accurate measurement and control of temperature in industrial and research systems is of particular importance, and the correct operation of some industrial and laboratory tools is possible only in a specific location with a small number of channels (maximum 8 channels). Therefore, the decision was made to build a ...
Dissertation for Master's Degree in Agricultural Engineering, Food Science and Technology, Food Technology, Abstract The purpose of this study was to investigate the antimicrobial effect of cactus seed extract as an alternative to chemical preservatives on the chemical, microbial and sensory characteristics of French salad dressing. The tested treatments are French sauce ...
Dissertation for obtaining a doctorate degree in the field of mechanical engineering - manufacturing and production: the advantages of using semi-solid processes are reducing the amount of gas porosity and shrinkage and modifying the microstructure, which aims to improve the mechanical properties of the part. In this research, the cooling ramp method has been used to produce the ...
Dissertation for Master's Degree in Electrical-Electronic Engineering (M.Sc) Abstract Sulfur recovery process by Klaus method is one of the most common methods of separating elemental sulfur from acid gas resulting from the sweetening process in gas and oil refineries. But due to the complexity of this process and the multivariable nature of the reaction furnace and the lack of ...
Dissertation: To receive the degree of professional doctor of veterinary medicine (D.V.M.) Farsi abstract Title: Investigating the contamination of drinking water of broiler farms in Piranshahr city with Escherichia coli bacteria Drinking water is one of the vital and nutritious factors that is necessary for optimal growth and control of body temperature and should always be ...
Master's thesis in the field of electrical power Abstract: Pulsed power is the accumulation of energy after a relatively long period of time and the release of energy very quickly. This process is to increase the instantaneous power of the system. The characteristic of this pulse includes the voltage level and rise time based on the load requirements. Improvement of efficiency ...
- Introduction Among herbivorous domestic animals, ruminants have a great contribution in food supply and human health. On the one hand, nutrition has played a major role in the economic and functional efficiency of these animals, so that almost two-thirds of the total cost of animal production in different livestock breeding units is allocated to feed costs, and on the other ...
Dissertation for Master's Degree in Rock Mechanics Abstract: Rock mass blasting ability is a very important feature in explosive designs in mines and construction activities, which is closely related to rock mass system, environmental conditions and blasting system. Among the factors affecting the explosiveness, there are controllable ones, and there are some that are ...
Abstract: Research in the field of heat transfer of suspensions with nanometer-sized solid particles in the base fluid has started in the last decade. Recent research in the field of nanofluids has shown that the addition of nanoparticles causes a significant increase in the heat transfer of the suspension. Another common way to improve the thermal performance of devices is to ...
Doctoral Dissertation on Energy Conversion Abstract One of the most important issues in internal combustion engines is heat transfer in them; Because almost a third of the energy produced inside the combustion chamber is removed through engine cooling. The heat transfer of internal combustion engines is important from various aspects, including the protection of materials used ...
Master's Thesis in Mechanical Engineering, Energy Conversion, Abstract: Thermal energy storage and phase change materials for use in heating and cooling systems of buildings has become an important issue in the last 20 years. When there is a mismatch between energy production and its consumption time, the issue of energy storage becomes important. In the present work, the fluid ...