Download more than 100 examples of thesis, proposal and project topics about gas condensate conversion in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Dissertation for M.Sc Master's degree, specialization: process engineering, abstract of the proposed project, the feasibility of converting gas condensates into products with higher added value and consumable fuels such as gasoline. Considering the huge gas and oil reserves in Iran, this country is one of the major importers of gasoline. Therefore, it is very necessary to ...
Dissertation for receiving the master's degree ""MA"" Field of industrial engineering: industries – Winter Industries 2013 Abstract Today attention is paid to the issue of supply chain and its management, in Asr
Dissertation for receiving a Master's degree (M.Sc.) specialization: Environment Abstract Gaseous liquids obtained from the refining of sour gases are also sour and contain a large percentage of hydrogen sulfide and mercaptans. Therefore, after distilling and preparing the products, it needs refining processes to remove or reduce the amount of sulfur and mercaptans present. ...
Master's thesis in the field of chemical nanoengineering Abstract: Fabrication of ceramic nanofiltration membrane for chloride ion separation (case study: gas condensate) In this research, chloride ion separation using alumina-titania double layer nanofiltration membrane has been investigated. For this purpose, first, the alumina-titania double-layer membrane is made based on ...
Master's thesis in the field of chemical nanoengineering, abstract modeling of chloride ion removal from gas condensate using nanofiltration of chloride ion in gas condensate can cause severe corrosion of equipment and pipes. Therefore, it is necessary to remove it from the condensate flow. The aim of this work is the mathematical modeling of the nanofiltration process for the ...
Master's Thesis of Electrical Engineering - Restructuring Abstract The trustees of distribution systems, as the last link in the chain of electricity supply to subscribers, face problems in their long-term decisions. Paying attention to electricity markets and rates affected by the performance of electricity market players challenges distribution companies, which are responsible ...
Master's thesis in the field of civil and environmental engineering. Abstract The main problem in using landfill biogas is the presence of pollutants such as hydrogen sulfide. Hydrogen sulfide gas is colorless, toxic, flammable, and has an unpleasant odor. It is highly toxic and produces SO2 when biogas is burned. In addition, hydrogen sulfide has a corrosive effect. It costs a ...
Master's Thesis of Chemical Engineering Abstract In the last few decades, due to the growth of the population as well as the improvement of living standards, the consumption of fibers and the production of textile waste materials have increased greatly. Burial and burning are one of the main ways of managing textile waste materials, which have destructive environmental effects. ...
Master's Thesis in Electrical Engineering - Renewal Abstract The trustees of distribution systems, as the last link in the chain of electricity supply to subscribers, face problems in their long-term decisions. Paying attention to electricity markets and rates affected by the performance of electricity market players challenges distribution companies, which are responsible and ...
Master's Thesis, Energy Conversion, Abstract: In this project, we will numerically investigate a stable gas flow in a microchannel with a rectangular cross-section. The flow with a certain temperature enters the channel with a constant temperature wall. Momentum and energy equations are discretized and solved numerically. Discretization has been done by FVM method and ...
Dissertation for Master's Degree in Mechanical Engineering-Energy Conversion Abstract The goals of this project include providing a solution for calculating the calorific value of waste based on the knowledge of the composition of waste and also proposing a combined cycle of waste incinerator power generation using the cold energy recovery of liquefied natural gas along with the ...
Master's Thesis of Energy Conversion Mechanical Engineering Abstract In recent years, due to the importance of finding energy, global warming and environmental pollution and its production sources, and the growing need of various industries for various forms of energy, as well as the large volume of its consumers around the world, the need to provide models to optimize energy ...
Dissertation for Master's Degree in Polymer Industry Engineering April 2013 Abstract Nowadays, the topic of energy and energy saving in all fields, even in homes, is one of the most important.
Thesis for obtaining a master's degree in the field: Geography, specialization: Climatology in environmental planning. Abstract Different climatic parameters such as temperature, humidity and rainfall in a place are factors that influence the climate of that region and knowing them determines the climate of that region. Climate change is one of the most important climate issues ...
Dissertation for Master's degree (M.A) major: urban planning, abstract of the increasing development of the country's urban population and the lack of prediction of sufficient and suitable land for the development of cities, the need to locate land for urban development, either by evaluating the possibilities of physical growth and development of existing cities along with ...
Dissertation for master's degree in electrical engineering, power orientation. Abstract The limitation of fossil fuel resources and the possibility of running out of fossil energy reserves, global warming, environmental pollution, price instability, as well as the increasing need of industrial and urban centers for energy, have made the international community think of suitable ...
Dissertation for master's degree in the field: Power Electrical Engineering Abstract Due to the extent and complexity of distribution networks, the probability of an accident occurring in them is very high, and the occurrence of an accident can affect many subscribers. Therefore, reliability is one of the key parameters determining the success rate of the system in providing ...
Abstract The reduction of fossil fuel resources, adverse environmental effects and low efficiency of traditional power grids have increased the desire to produce electricity near the load and the level of the distribution network using renewable sources. One of the basic solutions to solve the problems raised is the use of microgrids. A set of small sources of energy production ...
Dissertation for obtaining a master's degree in chemistry, fluoride has been known as a toxic ion for many years. The main source of fluoride in aqueous solutions is minerals containing fluoride and the industrial activities of factories. According to the report of the Environmental Protection Organization, the amount of fluoride more than 1 mg/liter causes various diseases. In ...
Master's thesis in the field of chemical engineering (gas engineering trend) in recent years, many horizontal wells have been drilled around the world. The main reason is the ability to increase the level of the tank in contact with the well, which increases the utilization of the well. Well testing is used to identify the models of hydrocarbon reservoirs and to identify their ...
Dissertation to receive the Ph.D. degree in Pharmacy Persian Summary A group of N-aryl phthalimide derivatives were evaluated for anti-inflammatory activity. Non-steroidal anti-inflammatory drugs are considered as analgesic and anti-inflammatory and their primary mechanism is cyclooxygenase enzyme inhibition. Cyclooxygenase is a key enzyme in the production of prostaglandin and ...
Dissertation to receive a master's degree in the field of chemical engineering, thermokinetic orientation. Abstract With the increase in the use of fuel cells in the industry and as an on-site application, there is a need to develop production units on the site of hydrogen. In this research, a monolithic catalytic reformer in which autothermal reforming of methane takes place is ...
Master's thesis in the field of polymerization engineering, abstract was determined by using experimental design methods to determine the optimal feed recipe for the preparation of nitrile rubber. Initially, to determine the factors affecting the rate of polymerization, screening tests were designed according to the Plate-Boorman method, which examines a large number of factors ...
Thesis for receiving a master's degree in the field of chemical engineering in the field of biotechnology. The abstract of this research was conducted in order to optimize the operational parameters for the use of bioleaching technology in the extraction of copper from the slag produced by the reflective smelting furnaces of Sarchesmeh copper complex. Wide applications of ...
Master's Thesis in Animal Science, Livestock and Poultry Nutrition Abstract This experiment was designed and implemented with the aim of investigating the effects of garlic or fresh onion supplementation on performance, immune system and blood lipid profile in broilers. For this purpose, 308 out of 432 day-old male chicks were divided into nine groups with four replicates and 12 ...
Master's Thesis in Polymerization Engineering Abstract In this research, the thermal and catalytic pyrolysis of four types of polymers such as heavy polyethylene and polypropylene and two styrene butadiene rubber and polybutadiene rubber in a semi-continuous stirred reactor under nitrogen gas and using HZSM-5, FCC and H-Mordenite catalysts has been investigated. In this study, ...
Master's thesis in the field of mechanical engineering - energy conversion trend Abstract: In this research, the turbulent flow of a non-Newtonian nanofluid in a microchannel with a circular cross-section is simulated. First, the types of classification of microchannels, the methods of making microchannels, as well as the advantages and challenges of using microchannels are ...
Dissertation for Master's Degree in Power System Abstract: The trend of reducing fossil fuel resources, adverse environmental effects and low efficiency of traditional power grids has increased the tendency to produce electricity near the load and the level of the distribution network using renewable sources. One of the basic solutions to solve the problems raised is the use of ...
Dissertation for M.Sc Mechanical Engineering - Energy Conversion Orientation Abstract: In this research, the turbulent flow of a non-Newtonian nanofluid in a microchannel with a circular cross-section is simulated. First, the types of classification of microchannels, the methods of making microchannels, as well as the advantages and challenges of using microchannels are stated. ...
Abstract In the present study, the effect of conditions (boiling) and storage time (9 days) on the content of ascorbic acid, nitrate and nitrite of 5 vegetable samples (broccoli, red cabbage, white cabbage, chives and mushrooms) were evaluated and the results were analyzed by spss 16.0 software. The results obtained from the statistical analysis showed that among the samples, ...
Field of study: Mechanics, orientation: energy conversion. The present research was conducted in order to investigate the movement of pig in pipelines. Due to the importance of pipelines in providing energy resources in the world, after installation and operation, the maintenance of these lines is of high importance, which has caused special attention to be paid to the design of ...
Dissertation for Master's Degree in Electrical-Electronic Engineering (M.Sc) Abstract Sulfur recovery process by Klaus method is one of the most common methods of separating elemental sulfur from acid gas resulting from the sweetening process in gas and oil refineries. But due to the complexity of this process and the multivariable nature of the reaction furnace and the lack of ...
Dissertation for M.Sc. Electrical Engineering - Control Abstract Considering the high consumption of petrochemical products in the world today and Iran's high potential for the development and supply of petrochemical feedstock, petrochemical complexes are of special importance. Therefore, one of the important reactions called acetylene hydrogenation has been investigated and ...
Thesis for Master's Degree in Energy Conversion (M.Sc.) Abstract The country of Iran is located between the orbits of 25 to 40 degrees north latitude and is located in an area that is among the highest in the world in terms of receiving solar energy. The amount of solar radiation in Iran is estimated between 1800 and 2200 kilowatt hours per square meter per year, which is higher ...
Dissertation for Master's Degree in Energy Conversion Mechanical Engineering Abstract: Fluid propulsion vector orientation has emerged as an important technology for high performance air vehicles. This technology can improve the maneuverability of the aircraft by changing the nozzle flow and its deviation from its axial direction. The purpose of this study is to investigate the ...
Dissertation for M.Sc Mechanical Engineering - Energy Conversion Trend Abstract In the last century, with the increasing demand for energy and the reduction of fossil fuel resources, the role of renewable energy in the progress and development of countries is not hidden from anyone. In the meantime, wind energy has a special share and has the highest growth rate among other ...
Mechanical Engineering Master's Thesis - Energy Conversion One of the ways to reduce energy consumption for underwater devices is to reduce the drag on these devices. The nose of underwater objects is one of the most important parts of these objects in dealing with currents. By optimizing this part, the drag can be reduced by controlling the boundary layer of the fluid, by ...
Doctoral Dissertation on Energy Conversion Abstract One of the most important issues in internal combustion engines is heat transfer in them; Because almost a third of the energy produced inside the combustion chamber is removed through engine cooling. The heat transfer of internal combustion engines is important from various aspects, including the protection of materials used ...
Master's thesis in the field of mechanics, specialization: mechanical engineering - energy conversion. Abstract: One of the most important components of fluid transmission systems are control valves, which can be seen in different routes of oil and gas transmission pipelines, etc. In control valves, the most important issue is the property of the flow in order to achieve the ...
Master's Thesis in Mechanical Engineering, Energy Conversion, Abstract: Thermal energy storage and phase change materials for use in heating and cooling systems of buildings has become an important issue in the last 20 years. When there is a mismatch between energy production and its consumption time, the issue of energy storage becomes important. In the present work, the fluid ...
Dissertation for Master's degree (M.Sc) orientation: energy conversion. Abstract In this research, a study on irreversible absorption refrigeration systems based on internal and external irreversibility is presented with regard to the limited thermal capacities of external tanks. To optimize the system, three scenarios were defined, in which objective functions such as ...
Dissertation for the Master's degree ""M.Sc"" in Mechanical Engineering - Energy Conversion. Abstract In this thesis, experimental analysis along with numerical simulation has been carried out to investigate the performance of Savunius vertical axis wind turbine. In order to carry out the tests, the turbine was tested in the subsonic wind tunnel. In order to check the accuracy ...
Master's thesis in the field of mechanical engineering in the field of energy conversion. Abstract The increasing use of fossil resources, the increase of greenhouse gases and the strict standards of car pollutants are the main incentive to use biodiesels as an alternative fuel for diesel engines. Air pollution, global warming, limited and expensive fossil resources are among ...
To obtain a master's degree in mechanical engineering - manufacturing and production Abstract Fuel cells are electrochemical devices that are used to directly convert fuel into electrical energy. One of the most important types of fuel cells is the polymer fuel cell, which is widely used. In general, two types of optimization can be done in the polymer fuel cell: optimization in ...
Master's Thesis, Mechanical Engineering, Energy Conversion, Abstract In this thesis, using the CFD computational fluid dynamics technique, the effect of key parameters such as the effect of secondary inlet pressure on the ejector device, suction ratio, return currents caused by secondary inlet pressure and the effect of all these parameters on the hydrodynamic characteristics of ...
Master's Thesis on Energy Conversion Abstract: Increasing heat transfer as well as increasing the efficiency of energy storage systems due to the limitation of natural resources and with the aim of reducing costs has always been one of the most basic concerns of engineers and researchers. This is especially important in fluids due to the small thermal conductivity coefficient. ...
Master's Thesis, Energy Conversion Engineering, Abstract: In many processes in the industry, the combination of liquid droplets with gas flow will lead to problems such as corrosion of downstream equipment and loss of expensive liquids. To solve these problems, the phases are separated from each other with the help of a separator. Cyclone separators, as a type of high efficiency ...
Master's Thesis of Mechanics, Energy Conversion, Abstract In this study, by using the computational fluid dynamics technique, an attempt has been made to obtain the optimal dimensions for the injection nozzles of the vortex tube device. For this purpose, numerical simulation has been performed for different values ??of length, width, and height of injection nozzles, and other ...
Master's Thesis in Mechanical Engineering - Energy Conversion Abstract The vortex tube is a simple mechanical device that has no moving parts and is one of the equipment used in the refrigeration system, in which a high-pressure fluid enters the vortex tube through the inlet nozzles and splits into two streams with a lower and higher temperature than the inlet temperature, thus ...
Field: Executive Management Fall 2019 Abstract: The purpose of this research is to investigate the relationship between organizational justice and job performance of employees of Ardabil gas company. Organizational justice, the role of fairness and especially the perception of fairness in the environment
Dissertation for Master's Degree (M.A.) Orientation: Industrial and Organizational The Impact of the Psychological Atmosphere Governing the Organization and Core Self-Evaluations on the Work Enthusiasm of Gar Miankoh Company's Employees Abstract This research was carried out with the aim of investigating the impact of the psychological environment governing the organization and ...
Dissertation for Master of Social Sciences (M.A) Degree: Researcher Abstract Professional values ??are the basis of employees' performance, which guide employees' interactions with citizens, colleagues, other professionals, and the general public, and provide a framework for commitment to the welfare of citizens and guidance for ethical behavior in the provision of humanitarian ...
Dissertation for Master's Degree in Public Administration, Human Resources, Abstract: In today's competitive world, organizations are looking for ways to maximize the efforts of their employees, and one of the most important of them is to motivate employees to play more important roles in the organization. Ethics means observing the principles and values ??governing the ...
Academic thesis for obtaining a master's degree in the field: business management, orientation: transformation, re-engineering and organizational architecture are comprehensive plans for the current and future description of the structure and behavior of processes, information systems, personnel and organizational units, and in fact, they seek to align them with the goals and ...
Dissertation for the Master's degree ""MsC."" Orientation: Human Resource Management Abstract The objectives of this research include identifying the relationship between ergonomic principles and stress in Shahroud Gas Company, which includes 4 sub-goals as follows 1- Identifying the relationship between occupational biomechanics and stress 2- Identifying the relationship ...
Dissertation for receiving the master's degree ""M. A"" Field: Management, Tendency: Human Resources, abstract is a general concept of servant leadership types in the management group, that this type of leadership can be the basis for classifying and evaluating the characteristics of servant leadership in the organization, which helps managers. Currently, the research and study ...
Master's thesis in electrical engineering, control trend, abstract of new methods of identifying errors in systems, such as the use of qualitative analysis of events, can lead to tangible and understandable results for everyone. The gas turbine system is one of the systems in which there is a possibility of many errors. And sometimes even modeling them with mathematical methods ...
Thesis for Master's Degree in Chemical Engineering Today, creating a safe environment in which all harmful factors are identified, evaluated, eliminated or controlled in order to guarantee the health of people and facilities is one of the priorities of industrial management. Safety science has also been reactive like the traditional approach to safety, that is, managers did not ...
Dissertation for receiving a master's degree in the field of executive management in the field of marketing Abstract Development of technology is one of the most important features of the new era. E-government means the adoption of technologies by the government in order to increase the efficiency and productivity of public services, and identifying obstacles is one of the ...
Master's thesis in the field of public administration, human resources orientation. Abstract This research was conducted with the aim of investigating the relationship between servant leadership and organizational trust and employee empowerment in Gas Company of Mazandaran province. The statistical population in this research is 459 employees of Mazandaran gas company and the ...
Dissertation for Master's Degree in Mechatronics Engineering Persian Abstract The purpose of this project is to introduce a new approach for troubleshooting gas transmission pipelines using mechanical waves, which is much cheaper and easier than other methods. who are currently working. These lines are usually located in difficult environmental conditions and far away and in ...
Dissertation to receive the master's degree ""M.Sc. Orientation: ""Biochemical Engineering"" Abstract: The presence of sulfur compounds in gasoline creates a serious problem in air pollution, environment, corrosion of equipment and destruction of human health. The new environmental standards also impose strict limits on the amount of sulfur and aromatic compounds in gasoline. ...
Dissertation for Master's degree (M.A.) Major: Sports Management Abstract This research was conducted with the aim of investigating the role of leisure time based on physical activity in the productivity of employees of the South Pars Gas Complex Company. The method of causal research is comparative. The statistical population includes all male and female employees in 1993, ...
M.Sc. Dissertation for Master Degree in Chemical Engineering - Process Engineering Abstract Mercaptans are removed from hydrocarbon streams by various methods. The use of caustic soda solution and mucoli sieve beds are among the most widely used methods. In the oil and gas industries of our country, washing with relatively dilute caustic solution is often used to remove light ...
Abstract Gas hydrates are a group of solid host compounds that play an important role in many processes such as gas storage, transfer and separation, heterogeneous catalysis and water purification. These crystals are formed at a temperature higher than the freezing point of water and high pressure. There are different methods to calculate the free energy difference: 1) ...
Master's Thesis in Chemical Engineering (Gas Orientation) Abstract Laboratory Investigation of Gas Dehumidification Using Triethylene Glycol Solution in Hollow Fiber Membrane Contactors In this study, two hollow fiber membrane contactors with different types of Polyvinylidene Fluoride (PVDF) and Polypropylene (PP) fibers have been used for gas dehumidification by Triethylene ...
Dissertation for Master's Degree (M.Sc.) Field: Gas Processing and Transmission Engineering Abstract: Today, one of the problems in gas transmission lines is the gas hydrate phenomenon, which is a combination of light gases such as methane, ethane or carbon dioxide with water molecules under certain temperature and pressure conditions to form an ice-like substance that contains ...
Master's thesis in the field: Chemical Engineering Abstract In this research, a comprehensive two-dimensional model based on the Finite Element Method (FEM) is proposed for modeling gas-solvent membrane contactors to remove carbon dioxide[1] from synthesis gas. Aqueous solution of monoethanolamine has been used as absorbent solvent stream and CO2/N2 gas mixture as gas stream. ...
Dissertation for Master's Degree in Chemical Engineering Abstract Paying attention to the issue of safety in industrial and chemical facilities is very important. According to the statistics, the amount of human, economic and environmental damages caused by industrial accidents every year in the world is very high. In addition, some of these damages are basically irreparable. ...
Chemical engineering master's thesis without preface today simulation in processes can be an important tool to solve problems in different industries. A new idea that should be done in the real world by trial and error with a lot of costs and risks can be simulated in the environment of a strong software and the results can be used. Simulation can also be used to check and ...
Dissertation of the Ph.D course in Chemical Engineering, Biotechnology, Abstract: Clostridium Langali is a highly anaerobic estogenic bacterium that can grow on synthesis gas components, i.e. CO and H2/CO2, and convert them into ethanol and acetate at ambient temperature and pressure. During this process, the bacterium shows a complex metabolic pathway that includes both ...
A master's thesis in the field of chemical engineering, abstract of the laboratory study and modeling of calcium carbonate production from calcium chloride solution by absorbing carbon dioxide from industrial exhaust gases, by the efforts of Amin Alamdari, the effect of carbon dioxide concentration on the precipitation of calcium carbonate species and the kinetics of calcium ...
A master's thesis in the field of chemical engineering. Abstract of the laboratory study of the wear phenomenon of gas containing sand and liquid droplets in pipelines. For this purpose, a pipeline test device including: vertical and horizontal pipelines and various connections has been made. The studied fluid consists of three phases: gas, liquid and solid. The gas phase is ...
Dissertation for obtaining the master's degree ""M.Sc."" (Chemical Engineering - Thermodynamics and Kinetics) Abstract: Keywords: Computational fluid dynamics, bubble, continuity and failure, floating bed reactors, multiphase systems, vertical vertical flows, PBM, DQMOM, recently liquid gas floating bed reactors have received attention due to their wide application in chemical, ...
The master's thesis of precision instruments and automation in the oil industry. The introduction of the entire research is one of the important scientific, technical and economic topics, the issue of corrosion of metals and the protection of metal facilities. Investigating the topic of corrosion is not so simple and with all the research done, its factors are still not known ...
Dissertation for the degree of Doctor of Dentistry Abstract: Introduction: Oral and dental problems are one of the potentially life-threatening problems in patients undergoing chemotherapy with blood dyscrasias. This study was designed to investigate a new solution to improve health in these people. Implementation method: In this single-blind clinical trial, we randomly selected ...
Dissertation: To obtain a master's degree in neonatal special care nursing Abstract Introduction: Premature babies are subjected to many painful interventions during care and treatment, and nurses should use non-pharmacological methods without risk to prevent short and long-term complications caused by pain, so this study was conducted to determine the effect of swaddling on the ...
Master's Thesis in the field of power, power electronics, power electronics, abstract. Distributed generation power plants have a production capacity of several kilowatts to 10 megawatts, which are used to produce electric energy in places close to consumers. Among their types, we can mention solar cells, fuel cells, micro turbines, wind power plants, etc. If these power plants ...