Download more than 100 examples of thesis, proposal and project topics about fluid pressure gradient in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Field of study: Mechanics, orientation: energy conversion. The present research was conducted in order to investigate the movement of pig in pipelines. Due to the importance of pipelines in providing energy resources in the world, after installation and operation, the maintenance of these lines is of high importance, which has caused special attention to be paid to the design of ...
Dissertation for Master's Degree Abstract Achieving higher rates of heat transfer using different techniques that can result in saving a significant amount of energy and also lead to the production of more compact and cheaper devices with higher thermal efficiency has attracted the attention of researchers. Vortex generation is one of the best methods used to increase heat ...
Master's Thesis on Energy Conversion Abstract: Increasing heat transfer as well as increasing energy efficiency due to the limitation of natural resources and reducing costs has always been one of the most basic concerns of engineers and researchers. This is especially important in fluids due to the small thermal conductivity coefficient. One of the most important ways to ...
To receive a master's degree in polymer engineering - polymer industries, May 2013 abstract With the progress of various sciences and knowledge, the boundaries of knowledge have converged and in some fields we are witnessing
Chapter 1 1-1-Introduction: Common fluids such as water, oils and ethylene glycol, which are usually used as heat transfer media, have a limited ability in terms of thermal properties, which is the first obstacle to compress and increase the efficiency of heat exchangers. One of the ways to improve heat transfer is to add particles to the fluid. This method is used for fluids ...
Master's thesis in chemical engineering field, vapor pressure is an important thermodynamic property in process equipment design and chemical engineering unit operation. Therefore, experimental vapor pressure data that cover the entire range of vapor pressure are very valuable, but due to the lack of accurate measurements for the vapor pressure of some materials near the triple ...
Master's thesis in the field of chemical engineering (simulation and process control) abstract design of the control system for the fluidized bed reactor for the production of linear light polyethylene of the LLDPE unit of Jam Petrochemical under the license of Basel and Spherilene technology with an annual production capacity of 300,000 tons of product is one of the largest ...
Master's Thesis in Chemical Engineering Abstract Vapor pressure is an important thermodynamic property in process equipment design and chemical engineering unit operation. Therefore, experimental vapor pressure data that cover the entire range of vapor pressure are very valuable, but due to the lack of accurate measurements for the vapor pressure of some materials near the ...
Dissertation for Master's Degree in Nursing (special care field) Abstract Introduction: A pressure ulcer is a tissue damage caused by pressure and can involve skin, muscle, connective tissue, cartilage and bone. Pressure ulcer is a painful, debilitating process and endangers a person's health by increasing mortality and morbidity in terms of increasing the length of ...
Master's Thesis in the field of Chemical Engineering (no orientation) Abstract of the laboratory study of the wear phenomenon of liquid containing sand in pipelines. The studied fluid consists of two phases, liquid and solid. The liquid phase is water, and sand particles form the solid phase. In this research, the parameters affecting the wear rate, including: fluid speed, sand ...
Master's thesis in the field of mechanical engineering - energy conversion trend Abstract: In this research, the turbulent flow of a non-Newtonian nanofluid in a microchannel with a circular cross-section is simulated. First, the types of classification of microchannels, the methods of making microchannels, as well as the advantages and challenges of using microchannels are ...
Dissertation for M.Sc Mechanical Engineering - Energy Conversion Orientation Abstract: In this research, the turbulent flow of a non-Newtonian nanofluid in a microchannel with a circular cross-section is simulated. First, the types of classification of microchannels, the methods of making microchannels, as well as the advantages and challenges of using microchannels are stated. ...
Master's Thesis of Mechanical Engineering-Applied Design Abstract In many applications, graphene (monolayer or multilayer) is used in the polymer matrix as a composite. In this research, ideal graphene with a hexagonal bond shape between atoms, located in a polymer matrix, with different boundary conditions, including gripped and simple, under biaxial external compressive ...
Mechanical Engineering Master's Thesis - Applied Design Abstract Today, in various industries such as aerospace, atomic energy, chemical industries, refineries, petrochemical industries, etc., there is a need to use high-pressure mechanisms to enable the completion of relevant processes. The increase in pressure is done inside the cylindrical chambers and as a result, such an ...
Dissertation for Master's Degree in Nursing Introduction: Increased intra-abdominal pressure (IAP) is known as an independent risk factor for mortality among patients in intensive care units, and the prevalence of intra-abdominal hypertension (IAH) is reported to be up to 58%. The effect of changing body position (elevating the head of the bed) on the accuracy of IAP measurement ...
Dissertation for Master's Degree in Energy Conversion Mechanical Engineering Abstract: Fluid propulsion vector orientation has emerged as an important technology for high performance air vehicles. This technology can improve the maneuverability of the aircraft by changing the nozzle flow and its deviation from its axial direction. The purpose of this study is to investigate the ...
Master's Thesis of Energy Conversion Mechanical Engineering Abstract In recent years, due to the importance of finding energy, global warming and environmental pollution and its production sources, and the growing need of various industries for various forms of energy, as well as the large volume of its consumers around the world, the need to provide models to optimize energy ...
Abstract: Research in the field of heat transfer of suspensions with nanometer-sized solid particles in the base fluid has started in the last decade. Recent research in the field of nanofluids has shown that the addition of nanoparticles causes a significant increase in the heat transfer of the suspension. Another common way to improve the thermal performance of devices is to ...
Mechanical Engineering - Applied Design Orientation Abstract: Vibration is one of the important and basic concepts in engineering sciences. In simple words, any system that has mass and spring property has the ability to vibrate and can vibrate at a natural frequency. It can be said with certainty that 95% of vibrations in industries are harmful to systems. If the system is in ...
To get a master's degree in mechanical engineering Abstract: Today, the use of aluminum and magnesium alloys in the automotive and aerospace industries is increasing due to the high strength of these alloys and their light weight. Since the forming ability of these alloys is low at ambient temperature, forming these alloys at high temperatures improves their formability. ...
Master's Thesis in Mechanical Engineering (Energy Conversion) Abstract Numerical investigation of the effect of microstructures on heat transfer and fluid mixing in microchannels, the need for high heat transfer from electronic packages and optical systems, etc., has created a challenge in the field of thermal management. In this context, microchannel heat wells play a great ...
Dissertation for Master's Degree (M.SC) Direction: Electronics Chapter 1: Outline of Design 1-1 Introduction The main problem of the research is to design and analyze the capacitive pressure sensor based on MEMS technology and to investigate how much the sensitivity of the sensor can be increased to measure eyeball pressure? In this research, the capacitive pressure sensor based ...
endname? Rasht Master's Degree: Civil Engineering (M.S.C.) Focus: Hydraulic Structures Academic Year 2011-2012 Summary of the Minab River, the most important river of Khan? The fresh water is in Hormozgan province. this river
Thesis for obtaining a master's degree in the field of civil engineering, oriented towards soil and foundation mechanics, Shahrivar 2013 Abstract Dams are always considered as infrastructure structures
Dissertation for Master's Degree (M.A) in the field of Natural Geography, Climate Hazards Abstract Dust storms are destructive weather phenomena that cause irreparable damage to urban areas, fields, facilities, roads, etc. every year. This phenomenon is affected by special weather conditions, and if the mechanism of its development and expansion is known, it is possible to ...
Dissertation for Master's Degree in Physical Education, Sports Physiology, Introduction Today, there is fierce competition between athletes in different countries to win championship titles in the Olympic, World and Continental Games, and the effort to improve the performance of athletes has made sports scientists to work more in this field and has increased research in sports ...
Dissertation for Master's Degree in Visual Communication Abstract: We consider the Holy Qur'an as a word from God to guide man. Therefore, many researches have been done in various formats to find the root of the word and the subtleties and miracles of this holy word since its revelation and compilation until now, and precise research and interpretation methods have been ...
Dissertation for receiving a master's degree in the field of civil engineering with a focus on soil and foundation. Abstract: The compressibility behavior of soils has become an important concern in geotechnical engineering. As buildings, embankments and roads are implemented, significant settlements often occur. Since long-term settlements occur due to creep, therefore, the ...
Master's Thesis Department: Civil Engineering (MSC) Specialization: Hydraulic Structures Abstract Minab River is the most important freshwater river in Hormozgan Province. This river is the drainage of the surface waters of the Minab catchment area, and two bridges have been built on it, the first one is the connecting road to Minab city and the second one is 1500 meters after ...
Dissertation for Master's degree (M.S) Chapter 1 History of dynamic analysis of liquid storage tanks and regulatory orders in this regard Abstract The main goal of this research is to investigate the effect of the presence of seismic isolators on the dynamic performance of liquid storage tanks during an earthquake. In this regard, it is necessary to first know the dynamic ...
Master's Thesis (Civil Engineering - Water and Wastewater Engineering) Abstract: In this study, ram impact pump modeling was done by the software that was prepared. This software finds the outputs of the HAMMER software as input and by obtaining other information (including the pumping height, etc.) it calculates the amount of pumped water every time the valve is suddenly turned ...
Dissertation for Master's Degree in Mechatronics Engineering Persian Abstract The purpose of this project is to introduce a new approach for troubleshooting gas transmission pipelines using mechanical waves, which is much cheaper and easier than other methods. who are currently working. These lines are usually located in difficult environmental conditions and far away and in ...
Dissertation for master's degree in civil engineering, structural orientation. Abstract Good bond strength between the old and new concrete surface is a key factor in the performance of concrete repairs. The purpose of this thesis is to investigate and evaluate the bond strength between the surface of the old concrete and the added concrete. In this thesis, a laboratory research ...
An academic thesis for receiving a master's degree in chemical engineering, environmental orientation. Among the models that are able to make successful predictions for the performance of reverse osmosis membranes, that is, the amount of separation and flow flux in a wide range of physical conditions (membrane and solution) and laboratory conditions (pressure and concentration), ...
Master's thesis in the field of chemical engineering (gas engineering trend) in recent years, many horizontal wells have been drilled around the world. The main reason is the ability to increase the level of the tank in contact with the well, which increases the utilization of the well. Well testing is used to identify the models of hydrocarbon reservoirs and to identify their ...
Master's Thesis in the field of Chemical Engineering Abstract Investigation of parameters affecting the production of alumina gel by sol-gel method Sol-gel method is one of the common methods that is widely used to produce different nanoparticles. In this method, a solution of initiators is mixed with water in the presence of a catalyst, and hydrolysis and polymerization ...
Dissertation for receiving a master's degree in the field of physical education in the field of sports physiology. Abstract: Athletes have been continuously searching for solutions to improve their sports performance. One of the methods that can develop sports performance and prepare athletes physically and mentally for sports activities is the use of herbal supplements. The aim ...
A master's thesis in the field of civil engineering - hydraulic structures Abstract Liquid storage air tanks are used not only to store water, but also to store chemicals and toxic substances in different forms. Considering the use of these structures in civil and urban development and industrial networks, their importance is determined before and after the earthquake. The ...
Dissertation for Master's Degree in Civil Engineering, Soil Mechanics and Foundation Abstract: Dams are always considered as infrastructure structures and have vital value. In the past, dams were mainly built for the purposes of providing drinking water and irrigation of agricultural fields, but today, due to the need for hydroelectric energy and other purposes, it has been ...
In order to obtain a master's degree in chemical engineering, abstract freezing of fans in operational units, including the hydrogen unit of Imam Khomeini Shazand Refinery in the cold seasons of the year is one of the important problems in this refinery. In order to provide a suitable solution to this problem, we must have a suitable estimate of the fan outlet temperature. The ...
Dissertation for Master's Degree (M.Sc.) Field: Gas Processing and Transmission Engineering Abstract: Today, one of the problems in gas transmission lines is the gas hydrate phenomenon, which is a combination of light gases such as methane, ethane or carbon dioxide with water molecules under certain temperature and pressure conditions to form an ice-like substance that contains ...
Presented to graduate education management as part of the academic activities required to obtain a master's degree in the field of mechatronics. Abstract As you know, air conditioner is a high consumption device and has a Freon refrigeration cycle. What drew the companies to the production of inverters was to solve the shortcoming of air conditioners in high energy consumption. ...
Special Care Nursing Master's Thesis Abstract Introduction and Objective: Hemodialysis leads to a change in a person's lifestyle and health status, which endangers not only physical health but also other aspects of health that all these factors affect the patient's quality of life, therefore, the present study was conducted with the aim of determining the effect of ...
Master's thesis in the field: Chemical Engineering Abstract In this research, a comprehensive two-dimensional model based on the Finite Element Method (FEM) is proposed for modeling gas-solvent membrane contactors to remove carbon dioxide[1] from synthesis gas. Aqueous solution of monoethanolamine has been used as absorbent solvent stream and CO2/N2 gas mixture as gas stream. ...
Chemical engineering master's thesis without preface today simulation in processes can be an important tool to solve problems in different industries. A new idea that should be done in the real world by trial and error with a lot of costs and risks can be simulated in the environment of a strong software and the results can be used. Simulation can also be used to check and ...
Master's thesis in the field of chemical engineering, abstract of the laboratory study of iron oxide production on a microstructural scale using the precipitation method with supercritical anti-solvent by: One of the problems of cement used in oil wells, which are used to connect wall pipes and well walls, is that these cements do not have the desired resistance against high ...
A master's thesis in the field of chemical engineering, abstract of the laboratory study and modeling of calcium carbonate production from calcium chloride solution by absorbing carbon dioxide from industrial exhaust gases, by the efforts of Amin Alamdari, the effect of carbon dioxide concentration on the precipitation of calcium carbonate species and the kinetics of calcium ...
A master's thesis in the field of chemical engineering. Abstract of the laboratory study of the wear phenomenon of gas containing sand and liquid droplets in pipelines. For this purpose, a pipeline test device including: vertical and horizontal pipelines and various connections has been made. The studied fluid consists of three phases: gas, liquid and solid. The gas phase is ...
The master's thesis of precision instruments and automation in the oil industry. The introduction of the entire research is one of the important scientific, technical and economic topics, the issue of corrosion of metals and the protection of metal facilities. Investigating the topic of corrosion is not so simple and with all the research done, its factors are still not known ...
Master's Thesis in Chemical Engineering Abstract Simulation of dynamic surface tension phenomenon in solvent oil systems based on permeation process is one of the prominent processes in the field of increasing extraction from oil reservoirs, gas injection. Therefore, a correct understanding of the mechanisms and how these processes are carried out is a big step towards ...
Dissertation to receive a master's degree in the field of chemical engineering, thermokinetic orientation. Abstract With the increase in the use of fuel cells in the industry and as an on-site application, there is a need to develop production units on the site of hydrogen. In this research, a monolithic catalytic reformer in which autothermal reforming of methane takes place is ...
Dissertation for obtaining a master's degree in the field of chemical nanoengineering Abstract In the uranium enrichment unit by centrifuge, UF6 gas after passing through the centrifuge and performing the enrichment process, enters the cold trap and is solidified and collected at a low temperature. One of the absorbents used to absorb uranium hexafluoride is sodium fluoride. The ...
Dissertation for Master's Degree in Chemical Engineering Abstract Critical characteristics for materials such as critical temperature, critical volume and critical pressure are important characteristics for predicting many thermodynamic properties of different materials. Knowing the critical properties plays an essential role in all hydrocarbon production and process operations. ...
Master's thesis in the field of chemical nanoengineering Abstract: Fabrication of ceramic nanofiltration membrane for chloride ion separation (case study: gas condensate) In this research, chloride ion separation using alumina-titania double layer nanofiltration membrane has been investigated. For this purpose, first, the alumina-titania double-layer membrane is made based on ...
Master's Thesis in Chemical Engineering (Process Simulation and Control) Abstract Modeling and Simulation of the Electrostatic Desalination Process of Crude Oil by Elham Ariafard The aim of this research is to model the desalination process of crude oil based on the population balance method. For this purpose, the one- and two-stage electrostatic desalination process, which ...
Dissertation for receiving a professional doctorate degree in the field of medicine Persian abstract Title: Comparison of the prevalence of obsessive-compulsive disorder in children with and without functional constipation referred to the pediatric clinic of Amirkabir Hospital in 2013 Introduction: Constipation in childhood is a common problem that causes discomfort to the child ...
Master's Thesis in Electrical Engineering, Power 1-1 Introduction Energy supply sources in the last few decades have been from fossil sources, which until recently have been obtained almost cheaply. Cheap energy sources caused that the optimal use of energy and energy recycling were practically not paid much attention. Due to the energy shortage crisis and the sense of danger ...
Master's thesis in the field of chemical nanoengineering, abstract modeling of chloride ion removal from gas condensate using nanofiltration of chloride ion in gas condensate can cause severe corrosion of equipment and pipes. Therefore, it is necessary to remove it from the condensate flow. The aim of this work is the mathematical modeling of the nanofiltration process for the ...
Master's thesis in the field of chemical engineering without major. Abstract: Modeling, simulation and optimization of Jam Petrochemical Check Bed Reactor for hydrogenation of 1 and 3-butadiene. Therefore, a suitable kinetic model has been selected as a basic structure for modeling the reactor, and after that the presented model has been developed in order to match the molar ...
Dissertation for Master's Degree in Intensive Care Nursing Introduction: Insertion of venous catheter is the most common invasive procedure performed for hospitalized patients. In many cases, this simple procedure can save the patient's life. On the other hand, this action becomes a difficult and time-consuming technique in some groups and patients. Various auxiliary measures ...
Dissertation: In order to receive a specialized doctorate degree in the field of general surgery, hydatid cyst disease is one of the common diseases of humans and animals, which is caused by Echinococcus granulosis. (1) This disease is more common in areas where there are more animals such as sheep and dogs, such as Iran, Turkey, Mediterranean countries and the Middle East, ...
Dissertation for receiving a master's degree in applied chemistry, Persian abstract. In this research, graphite particles were converted to graphene oxide by Hammer's method. Graphene nanoparticles are one of the best and most effective absorbent materials that have been produced so far. Graphene is one of the successful allotropes of carbon in the field of drug absorption and ...
Persian Abstract Introduction: In the food industry, there is an increasing tendency to develop economic methods in order to prepare food products with high nutritional and sensory value. Drying is one of the most widely used methods for preserving fruits and vegetables. Citrus fruits are one of the most important tropical and sub-tropical fruits in the world, which are highly ...
Master's Thesis in Mechanical Engineering, Applied Design, Abstract In this research, an analytical solution is presented to show the size dependence and the effect of temperature difference on nonlinear free vibrations and post-buckling behavior of microtubes containing current. Based on Euler-Bernoulli model, strain gradient theory, Couple's stress theory and von-Carman ...
Dissertation for Master's Degree in Mechanical Engineering Abstract: Nowadays, due to the increase in population in big cities, building high-rise buildings and residential towers may seem inevitable. But in locating these types of buildings and placing them together, a series of environmental requirements must be observed. In this thesis, an attempt has been made to re-evaluate ...
Abstract Photovoltaic or PV for short is one of the types of electricity generation systems from solar energy. In this method, by using solar cells, direct production of electricity from sunlight becomes possible. Solar cells are semi-conductors that are made of silicon, the second most abundant element in the earth's crust. When sunlight shines on a photovoltaic cell, a ...
Thesis for obtaining a master's degree in the field: Chemistry, specialization: Analytical Chemistry, Abstract In recent years, the use of nanotubes as nanocarriers for drug delivery has been researched. In this research, carbon nanotubes CNT(5-5), CNT(0-6), BNNT(0-6) and BNNT(5-5) doped with Ga have been used. First, the nanotubes were drawn using Gauss View and Nanotube ...
Master's degree in electrical engineering, electronics, abstract, accurate measurement and control of temperature in industrial and research systems is of particular importance, and the correct operation of some industrial and laboratory tools is possible only in a specific location with a small number of channels (maximum 8 channels). Therefore, the decision was made to build a ...
Dissertation for receiving a master's degree in the field of electricity - the tendency of electric machines. Abstract In this thesis, the behavior of the wind power plant is investigated using the detailed model of induction generator with two-way feeding. Electronic converters of the power plant and its control systems and the behavior of the power plant include electrical and ...
Dissertation for Master's Degree in Animal and Poultry Nutrition Abstract This research was conducted in order to investigate the effect of different levels of savory essential oil, including levels (0 mg, 200 mg, 400 mg) and type of grain (maize and barley) on the process of rumen fermentation, animal performance and some blood parameters of goats native to West Azerbaijan. In ...
History of Aluminum Rolling Company 1- Introduction of Arak Aluminum Rolling Company in 1351, 2 km from Arak-Aqran road, on a land with an area of ??22 hectares, approximately 1.2 hectares of which is under the factory building and administrative role, and 2 hectares of which is green and open space, which is the development and expansion and renovation of Iran's industries. ...
Master's thesis in the field of mechanical engineering, energy conversion trend. Abstract: Considering that heat transfer is widely used in various fields of science, it is necessary to use wide recessed or raised surfaces due to physical and spatial limitations in electrical systems. The main purpose of using these surfaces is to increase heat transfer by increasing the ...
Dissertation for M.Sc. Mechanical Engineering - Manufacturing and Production Trend Abstract The manufacture of square and rectangular pipes has received more attention due to their wide use in industries that require high pressure and temperature. There are different methods for making rectangular tubes, including extrusion, stretching and pressing. Another method that has been ...
Master's Thesis of Precision Instrumentation and Automation in the Oil Industry. Abstract: Corrosion rate prediction and wear rate constant in gas brain tube using neural network is a phenomenon that is very complex due to the influence of various factors and cannot be modeled easily. In order to predict and model corrosion, attention is paid to its physical, chemical and ...
Mechanical Engineering Master's Thesis - Energy Conversion One of the ways to reduce energy consumption for underwater devices is to reduce the drag on these devices. The nose of underwater objects is one of the most important parts of these objects in dealing with currents. By optimizing this part, the drag can be reduced by controlling the boundary layer of the fluid, by ...
Dissertation for receiving a master's degree in food technology, Persian abstract, background and purpose: Olive tree leaves have many compounds, including oleuropein, which are related to the majority of their medicinal properties. Olive leaf extract is also rich in phenolic compounds. In order to extract phenolic compounds, olive leaves must first be dried. Natural drying and ...
Master's Thesis in Mechanical Engineering - Applied Design Abstract of elastoplastic analysis of thick-walled tanks made of targeted materials with linear kinematic stiffness behavior under cyclic loading, stress analysis and deformation of spherical thick-walled tanks made of subject materials under internal pressure loading and temperature difference are discussed in this ...
Master's Thesis Applied Design Abstract In this thesis, in the field of vacuum technology, the importance, application and role of this technology in the industry and the advancement of scientific research, technical terms related to this technology, types of vacuum pumps, applications, advantages and disadvantages of each of the vacuum pumps, the importance of studying the ...